[general]
; This section sets global variables of the MGCP Gateway module

; standby: bool: Enter standby mode initially
;standby=no

; cluster: bool: Enable cluster mode
; If standby is enabled cluster mode is forced
;cluster=


[engine]
; These parameters are used to initialize the MGCP Engine

; enabled: bool: Enable the MGCP engine
;enabled=yes

; address: ipaddress: Local IP address to bind to, default all interfaces
;address=0.0.0.0

; port: int: UDP port to bind, set to zero to use default MGCP GW port (2427)
;port=

; Maximum received packet size, 1500 to 65528, default 1500
;max_recv_packet=1500

; buffer: int: Requested size of socket's receive buffer, 0 for system default
; Minimum value is 4096
;buffer=0

; request_ack: bool: Request an Acknowledge of the transactions
;request_ack=yes

; send_provisional: bool: Send 1xx provisional answers to the requests
;send_provisional=yes

; retrans_interval: int: Message retransmission interval in msec
;retrans_interval=250

; retrans_count: int: Maximum number of retransmissions
;retrans_count=3


[codecs]
; This section allows to individually enable or disable the codecs

; default: bool: Enable all unlisted codecs by default if a transcoder exists
;default=enable

; mulaw: bool: Companded-only G711 mu-law (PCMU/8000)
;mulaw=default

; alaw: bool: Companded-only G711 a-law (PCMU/8000)
;alaw=default

; gsm: bool: European GSM 06.10 (GSM/8000)
;gsm=default

; lpc10: bool: Linear Prediction Codec (LPC/8000)
;lpc10=default

; ilbc: bool: Internet Low Bandwidth Codec (iLBC/8000)
;ilbc=default

; amr: bool: Adaptive Multi-Rate 3GPP (AMR/8000)
;amr=default

; slin: bool: Signed Linear 16-bit uncompressed (L16/8000)
;slin=default

; g723: bool: ITU G.723 all variations (G723/8000)
;g723=default

; g726: bool: ITU G.726 32-bit (G726-32/8000)
;g726=default

; g728: bool: ITU G.728 all variations (G728/8000)
;g728=default

; g729: bool: ITU G.729 all variations (G729/8000)
;g729=default

; g729_annexb: bool: G.729 Annex B (VAD) support default (if not in SDP)
; NOTE: RFC 3555 specifies the default should be yes
;g729_annexb=no

; amr_octet: bool: Octet aligned AMR RTP payload default (if not in SDP)
; NOTE: RFC 4867 (and older 3267) specifies the default is bandwidth efficient
;amr_octet=no


[hacks]
; This section holds the dirty stuff required to work with some broken
;  implementations
;
; ilbc_forced: string: Format to force as iLBC, can be: ilbc20 or ilbc30
;ilbc_forced=
;
; ilbc_default: string: Format to use for iLBC when packetization is unknown
;ilbc_default=ilbc30

; g729_annexb: bool: Force G.729 Annex B support when parsing the SDP
;g729_annexb=

; ignore_sdp_port: bool: Ignore SDP changes if only the port is different
; This allows preserving the local RTP session and port
;ignore_sdp_port=no

; ignore_sdp_addr: bool: Ignore SDP changes if only the address is different
; This allows preserving the local RTP session and port
;ignore_sdp_addr=no


;[ep PUT_NAME_HERE]
; One ep ... section is required for each of our endpoints
; Each endpoint can be associated with at most one Call Agent
; The endpoint name is a string that can be referenced from other modules

; local_user: string: The user part of the local endpoint, default endpoint name
;local_user=

; local_host: string: The host part of the local endpoint, default engine's address
;local_host=

; local_port: int: Declared local port, defaults to engine's port
;local_port=

; remote_host: string: The host part of the remote endpoint, required
;remote_host=

; remote_port: int: Declared remote port, use MGCP default if not set or zero
;remote_port=