[general]
; This section sets global variables of the implementation

; debug: int: OpenH323 debug level
;debug=0

; dumpcodecs: int: Debug level to dump registered OpenH323 codecs, 0 disables
;dumpcodecs=0

; vendor: string: Vendor name
;vendor=Null Team

; product: string: Product name
;product=YATE

; major: int: Major version number
;major=2

; minor: int: Minor version number
;minor=0

; build: int: Build number
;build=0

; status: keyword: Code status: alpha, beta or release
;status=release

; needmedia: bool: Drop calls for which no common media could be negotiated
;needmedia=yes

; dtmfmethods: string: Comma separated list of methods used to send DTMFs
; Allowed values in list:
;  h323: Use library send user input method
;  rfc2833: Use RFC 2833 signals if remote party advertised support
;  inband: Send tones in audio stream
; The methods will be used in the listed order
; Defaults to 'rfc2833,h323,inband' if missing or empty
; Invalid values are ignored
; E.g.
;   'h323,foo' leads to 'h323'
;   'foo,foo1' leads to 'rfc2833,h323,inband'
; This parameter can be overridden from routing by 'odtmfmethods' for outgoing call leg
;  and 'idtmfmethods' for incoming call leg
; Also, this parameter can be overridden in chan.dtmf messages by a 'methods' parameter
; NOTE:
;   When overridden from chan.dtmf an empty or invalid 'methods' parameter will be ignored
;   Methods indicated in chan.dtmf message will be intersected with channel capabilities
;    unless an explicit boolean true 'methods_override' parameter is present
; This parameter is applied on reload for new calls only
;dtmfmethods=rfc2833,h323,inband

; honor_dtmf_detect: bool: Honor DTMF detected method when sending DTMFs
; If enabled the channel will try to send a DTMF using the same method as received
; If the detected method is not enabled it won't be used
; This parameter can be overridden from routing by 'ohonor_dtmf_detect' for outgoing call leg
;  and 'ihonor_dtmf_detect' for incoming call leg
; This parameter is applied on reload for new calls only
; Defaults to enable
;honor_dtmf_detect=enable

; Use an external RTP module instead of the native OpenH323 RTP stack, which is
;  very cpu intensive. If no external RTP can be found it will fallback to the
;  native stack. The only external RTP now is yrtp (see the yrtpchan module).
; external_rtp: bool: default: yes
;external_rtp=yes

; Attempt to use native (OpenH323) RTP if external fails to start. This is
;  usefull only if the failure is caused by the external RTP module not
;  being loaded.
; fallback_rtp: bool: default: yes
;fallback_rtp=yes

; Perform direct RTP forwarding between client endpoints.
; You should enable faststart=on in the [ep] section and make sure fast start
;  is also supported and enabled on all clients.
; forward_rtp: bool: default: no
;forward_rtp=no

; The OpenH323 cleaner thread is a scarce shared resource. A limit set here
;  will force new connections to be dropped if too many are already being
;  in the cleanup queue. Set the limit to zero to disable this check.
; maxcleaning: int: default: 100
;maxcleaning=100

; pwlibthread: bool: Make new calls in a PWlib thread, required for LRQ calls
;pwlibthread=no


[codecs]
; This section allows to individually enable or disable the codecs
; For all but the default setting you can specify the value "fake" so that
;  it will try to declare the capability even if it's no codec available
; Using the OpenH323 internal RTP with a missing codec will lead to a crash!

; default: bool: Enable all unlisted codecs by default
;default=enable

; mulaw: bool: Companded-only G711 mu-law (G.711-uLaw-64k)
;mulaw=default

; alaw: bool: Companded-only G711 a-law (G.711-ALaw-64k)
;alaw=default

; gsm: bool: European GSM 06.10 (GSM-06.10)
;gsm=default

; msgsm: bool: Microsoft's proprietary verion of GSM (MS-GSM)
;msgsm=default

; speex: bool: Speex narrow (SpeexNarrow)
;speex=default

; lpc10: bool: Linear Prediction Codec (LPC-10)
;lpc10=default

; ilbc20: bool: Internet Low Bandwidth Codec 20ms (iLBC-15k2)
;ilbc20=default

; ilbc30: bool: Internet Low Bandwidth Codec 30ms (iLBC-13k3)
;ilbc30=default

; slin: bool: Signed Linear 16-bit uncompressed (PCM-16)
;slin=default

; g723: bool: ITU G.723 all variations (G.723)
;g723=default

; g726: bool: ITU G.726 all variations (G.726)
;g726=default

; g728: bool: ITU G.728 all variations (G.728)
;g728=default

; g729: bool: ITU G.729 all variations (G.729)
;g729=default


[ep]
; Control the endpoint operation of the module

; ep: bool: True if you want to activate the h323 endpoint
ep = true

; gw: bool: Set to true if you want this endpoint to declare itself as gateway
gw = false

; addr: string: IP address to bind the endpoint to, defaults to all interfaces
; This parameter is applied on reload
;addr=

; port: int: TCP port on which the endpoint will listen
; This parameter is applied on reload
;port=1720

; bind_retry_count: integer: The number of bind retries for endpoint's listener
; This parameter is used when failed to bind on configured port
; The endpoint will try to bind on a random port chosen in the range given
;  by 'bind_minport' and 'bind_maxport'
; Set it to 0 to disable bind retry if failed on configured port
; Minimum allowed value is 0, maximum allowed value is 10
; Defaults to 5
;bind_retry_count=5

; bind_minport: integer: Minimum port for bind retry range
; Minimum allowed value is 1, maximum allowed value is 65535
; Defaults to 1000
;bind_minport=1000

; bind_maxport: integer: Maximum port for bind retry range
; Minimum allowed value is 1, maximum allowed value is 65535
; Defaults to 65535
;bind_maxport=65535

; timeout_control: integer: Control channel start timeout in msec
; Valid range 10000 to 600000 (10s to 10m), library default 2m
;timeout_control=120000

; timeout_answer: integer: Answer timeout (maximum time until CONNECT) in msec
; Valid range 5000 to 600000 (5s to 10m), library default 1m
;timeout_answer=60000

; timeout_capabilities: integer: Capability exchange timeout in msec
; Valid range 1000 to 120000 (1s to 2m), library default 30s
;timeout_capabilities=30000

; alias: string: The alias used by h323 module to connect to gatekeeper
alias = yate

; ident: string: Sets the hostname part of the outgoing e.164 (numeric) aliases
ident = yate

; maxconns: int: Maximum number of simultaneous connections (0 = no limit).
;maxconns=

; faststart: bool: Enable Fast Start mode (offer media channels early)
; This setting is required when doing direct RTP forwarding between endpoints
;faststart=true

; h245tunneling: bool: Enable H.245 tunneling mode
; This setting is almost always required to pass through a NAT
;h245tunneling=true

; h245insetup: bool: Enable H.245 establishment early in call setup message
; Note that this setting may conflict with faststart so don't enable both
;h245insetup=false

; dtmfinband: bool: Wheter to decode inband DTMF (CPU intensive)
;dtmfinband = false

; silencedetect: keyword: Silence detection algorithm: none, fixed, adaptive
; This applies only to OpenH323 internal RTP
;silencedetect = none

; gkclient: bool: If h323 module endpoint should register to a gatekeeper
gkclient = false

; password: string: Password for h.235 authentification
;password = 1234

; gkip: ipaddress: Set the reported ip aaddress of the gatekeeper
;gkip = 10.10.10.10

; gkname: string: Set the name of the gatekeeper
;gkname = gigi

; gkttl: int: Proposed gatekeeper registration time to live in seconds
;gkttl = 300

; gkretry: int: Gatekeeper discovery retry interval in seconds, 0 disables
;gkretry = 60

; authmethods: string: Comma separated list of authentication methods to use
; It can be use to change the order of offered authentication methods
; Possible values: H.235.1, MD5, CAT
; This parameter is applied on reload for both client and server
; Note: this parameter is used only when requested by the H323 library, changing it
;  won't trigger a re-register
; Setting a '*' to the end of list will indicate to use all methods created by the
;  H323 library
; Examples:
;  authmethods=MD5,CAT
;  authmethods=MD5,*
;  authmethods=MD5,*,CAT - same as authmethods=MD5,CAT
;  authmethods=* - same as leaving the parameter empty
;authmethods=

; How the gatekeeper is located
; If gkclient is true the endpoint will try first to find the gatekeeper by
; using gkip; then, if gkip is unset or is not corect, will try gkname and
; then will try to brodcast in the network.


[gk]
; If server is true the gatekeeper of yate will start. You must understand that
; the H323EndPoint and H323GateKeeper share the calls. So you can make a call
; to a registered endpoint of this gatekeeper even if in the [ep] section
; you haven't register the local H323EndPoint to the local H323Gatekeeper. In
; fact is not recomanded to register the local EndPoint to the local GateKeeper.
; The local H323EndPoint is used as proxy for calls to local non h323
; destinations. If you wanna call let's say tone/dial from a registered
; endpoint to the local gatekeeper, you must make a route in regexroute (or
; whatever you use) and then just dial the number.
; If you wanna call a registered endpoint you must use now as a module register
; since is the only module who can record prefixes right now.

; server: bool: Enable running a gatekeeper on the main endpoint
;server = false

; You must define the binding interfaces. Right now the multi hosted boxes don't
; work very well because OpenH323 mechanism, but we will fix that if someone
; have any problem.
;interface1=10.0.0.1

; port: int: Port on which the gatekeeper listens for connections
;port = 1719

; name: string: Identifier of the gatekeeper
;name = YateGatekeeper

; ttl: int: Registrations time to live in seconds, 0 to disable
;ttl = 600

; heartbeatdrop: bool: Drop calls for which the heartbeat timed out
;heartbeatdrop=true

; registeredonly: bool: Allow calls only with registered endpoints
;registeredonly=false


[incoming]
; This section sets defaults for the incoming H.323 calls

; context: string: Input context
;context=default

; maxqueue: int: Maximum length of the routing queue
; Normaly you will like to have this setup to a certain value so someone can't
; do a DoS attack over your server.
;maxqueue=5

; called: string: Default number to call if not present in call setup
;called=