[general]
; These are the setting for the default radio device profile

; slowdown: integer: Slowdown factor relative to real time speed
; Valid values 1 - 1000, default 1
;slowdown=1

; freq_error: integer: Additive frequency tuning error (Hz)
; Valid values: -10000 - 10000, default 0
;freq_error=0

; freq_step: integer: Pretend tuning can be done only modulo this value (Hz)
; Valid values 1 - 10000000, default 1
;freq_step=1

; sample_error: integer: Additive sample rate error (Hz)
; Valid values -1000 - 1000, default 0
;sample_error=0

; sample_step: integer: Pretend sample rate can be set only modulo this value (Hz)
; Valid values 1 - 1000, default 1
;sample_step=1

; filter_step: integer: Pretend filter bandwidth can be set only modulo this value (Hz)
; Valid values 100000 - 5000000, default 250000
;filter_step=250000

; The following parameters correspond to members of the RadioCapability structure

; maxTuneFreq: integer: Maximum tunable frequency (Hz)
; Valid values 100000000 - 50000000000, default 5000000000
;maxTuneFreq=5000000000

; minTuneFreq: integer: Minimum tunable frequency (Hz)
; Default values 250000000 - 5000000000, default 500000000
;minTuneFreq=500000000

; maxSampleRate: integer: Maximum settable sample rate (Hz)
; valid values 5000000 - 50000000, default 20000000
;maxSampleRate=20000000

; minSampleRate: integer: Minimum settable sample rate (Hz)
; Valid values 50000 - 5000000, default 250000
;minSamplerate=250000

; maxFilterBandwidth: integer: Maximum settable filter bandwidth (Hz)
; Valid values 5000000 - 50000000, default 5000000
;maxFilterBandwidth=5000000

; minFilterBandwidth: integer: Minimum settable filter bandwidth (Hz)
; Valid values 100000 - 5000000, default 1500000
;minFilterBandwidth=1500000

; rxLatency: integer: Simulated receiver latency (samples)
; Valid values 0 - 50000, default 10000
;rxLatency=10000

; txLatency: integer: Simulated transmitter latency (samples)
; Valid values 0 - 50000, default 10000
;txLatency=10000

; profiling: boolean: True if a profiling tool is running
; Disable some time related capabilities
;profiling=no

; sample_energize: integer: Optional value used to energize sent data
; Interval allowed: [0..10000]. 0: disabled
;sample_energize=0

; rx_file_raw: string: Optional path to file containg raw data (float) to be returned
;  when receive is requested
;rx_file_raw=

; rx_buf_chunk: integer: Optional RX data chunk size
; This value will be used to allign upper layer timestamp and return aligned data from
;  configured rx_file_raw file
; This parameter will be ignored if non 0 and rx_file_raw file samples count is not a
;  a multiple of rx_buf_chunk samples
;rx_buf_chunk=0