marian
|
754e0561fa
|
Added configurable param (disabled by default) used to enable LMS chip autocal on device power on.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6247 acf43c95-373e-0410-b603-e72c3f656dc1
|
2017-07-31 13:59:46 +00:00 |
|
marian
|
3480211959
|
Added capability to configure buffered samples based on required sampling rate.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6244 acf43c95-373e-0410-b603-e72c3f656dc1
|
2017-06-28 14:01:26 +00:00 |
|
marian
|
554869663b
|
Fixed error reporting. Fixed some returned codes. Added config params documentation.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6243 acf43c95-373e-0410-b603-e72c3f656dc1
|
2017-06-27 11:40:01 +00:00 |
|
marian
|
d14f741ce3
|
Added configurable params for max supported samplig rate on super/high interface. Return HW not available code when no device is found.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6239 acf43c95-373e-0410-b603-e72c3f656dc1
|
2017-06-22 14:02:38 +00:00 |
|
marian
|
eed4b72288
|
Documented calibration debug parameters. Improved debug.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6236 acf43c95-373e-0410-b603-e72c3f656dc1
|
2017-06-21 13:38:26 +00:00 |
|
marian
|
8496611412
|
Added extra check for valid tunning frequency. Improved debug. Documented missing config param.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6183 acf43c95-373e-0410-b603-e72c3f656dc1
|
2017-02-13 12:20:54 +00:00 |
|
marian
|
3a18112a7f
|
Frequency offset calibration by Razvan Varlan.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6164 acf43c95-373e-0410-b603-e72c3f656dc1
|
2017-01-12 14:56:58 +00:00 |
|
marian
|
c392c31c47
|
Added option (enabled by default) to simulate tx gain correction in software.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6141 acf43c95-373e-0410-b603-e72c3f656dc1
|
2016-09-27 11:39:56 +00:00 |
|
marian
|
34a58b284f
|
Replaced calibration algorithm (work in progress). Added asynchronous calibration support. Removed test capability.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6114 acf43c95-373e-0410-b603-e72c3f656dc1
|
2016-05-04 12:33:21 +00:00 |
|
marian
|
9802fbbc52
|
Added new, shorter, timeout for samples transfer. Properly handle incomplete transfers.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6067 acf43c95-373e-0410-b603-e72c3f656dc1
|
2015-11-19 15:15:01 +00:00 |
|
marian
|
fb066c3e51
|
Removed unused RadioInterface methods and data. BladeRF driver is now advertising radio caps and is accumulating data to send to avoid short write operations.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6055 acf43c95-373e-0410-b603-e72c3f656dc1
|
2015-10-12 15:06:31 +00:00 |
|
marian
|
0abe6470bd
|
Added option to set TX FPGA GAIN from config.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6047 acf43c95-373e-0410-b603-e72c3f656dc1
|
2015-09-25 13:48:19 +00:00 |
|
marian
|
d190d4e8a2
|
Implemented configurable option for TX clamped samples debug threshold. Simplified parameters reload.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6046 acf43c95-373e-0410-b603-e72c3f656dc1
|
2015-09-22 14:30:38 +00:00 |
|
marian
|
9575abca85
|
Implemented timestamp resync. Added configurable option for allowed interval with timestamps in the past to make sure we are returning from read. Implemented capability to alter rx timestamps (for debug purposes).
git-svn-id: http://yate.null.ro/svn/yate/trunk@6045 acf43c95-373e-0410-b603-e72c3f656dc1
|
2015-09-22 13:36:26 +00:00 |
|
marian
|
1f01a0ff5f
|
Enable by default rx timestamps check. Apply parameter on reload. Documented it. Changed invalid timestamps debug message to MILD.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6017 acf43c95-373e-0410-b603-e72c3f656dc1
|
2015-08-06 15:11:56 +00:00 |
|
marian
|
dff954a437
|
Added extra parameter to configure data dump.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6001 acf43c95-373e-0410-b603-e72c3f656dc1
|
2015-07-15 09:21:30 +00:00 |
|
marian
|
4431d99720
|
Added capability to dump data to bladerf module.
git-svn-id: http://yate.null.ro/svn/yate/trunk@6000 acf43c95-373e-0410-b603-e72c3f656dc1
|
2015-07-14 13:22:00 +00:00 |
|
marian
|
fb80124f8e
|
Added bladerf fpga files. Changed fpga load default path.
git-svn-id: http://yate.null.ro/svn/yate/trunk@5993 acf43c95-373e-0410-b603-e72c3f656dc1
|
2015-07-10 14:35:37 +00:00 |
|
marian
|
1d5f7b050f
|
Added bladeRF module.
git-svn-id: http://yate.null.ro/svn/yate/trunk@5979 acf43c95-373e-0410-b603-e72c3f656dc1
|
2015-06-24 10:41:29 +00:00 |