85 lines
2.7 KiB
Text
85 lines
2.7 KiB
Text
![]() |
|
||
|
; NOTE this file is used to setup CPU load information's
|
||
|
; The cpuload module inform YATE about system total CPU load and YATE CPU load
|
||
|
|
||
|
;[general]
|
||
|
|
||
|
; This section keeps the settings for system and Yate.
|
||
|
|
||
|
; interval: int: The interval in milliseconds for CPU load check.
|
||
|
; Note: Minimum value is 1s.
|
||
|
; Default value 1s
|
||
|
; interval=1000
|
||
|
|
||
|
; oscillate_interval : int: Time in milliseconds that stop this module from notifying about CPU load,
|
||
|
; if the CPU load is oscillating between consecutive intervals
|
||
|
; NOTE! oscillate_interval value should be at least 2 * interval
|
||
|
; oscillate_interval=5000
|
||
|
|
||
|
; core_number: integer: The number of CPU cores
|
||
|
; NOTE! Yate will detect the number of cores from "/proc/stat". If the file does not exists you should
|
||
|
; set the core number to avoid that yate CPU load to be bigger than 100%
|
||
|
; core_number=1
|
||
|
|
||
|
; smooth : integer between 5 and 50 : Value used to smooth the CPU loading.
|
||
|
; smooth = 33
|
||
|
|
||
|
;The following sections represent the CPU load managers.
|
||
|
|
||
|
; NOTE!!! Each parameter form the following sections need to match this type:
|
||
|
; target_name=interval_name,threshold_value,hysteresis_value;......
|
||
|
; target_name: string: The name if the target.
|
||
|
; interval_name : string: The name of the interval.
|
||
|
; threshold_value: int: The upper value of the interval.
|
||
|
; hysteresis_value: int.
|
||
|
|
||
|
; Examples: engine=accept,50,4;partial,65,2;congestion,80,2;reject
|
||
|
; The target is "engine";
|
||
|
; Interval names: all, partial,congestion,none;
|
||
|
; Threshold value: 50, 65, 80
|
||
|
; from this results two sets of intervals:
|
||
|
|
||
|
; one when the CPU load is growing :
|
||
|
; accept = 0-54
|
||
|
; partial = 54 - 67
|
||
|
; congestion = 67 - 82
|
||
|
; reject = 82 - 100
|
||
|
|
||
|
; two when CPU load is lowering
|
||
|
; accept = 0-46
|
||
|
; partial = 46 - 63
|
||
|
; congestion = 63 - 78
|
||
|
; reject = 78 - 100
|
||
|
|
||
|
; NOTE! : Parameters can be appended with chan.control message and with rmanager command
|
||
|
; Example: rmanager
|
||
|
; "control cpuload section target_name=interval_name,threshold_value,hysteresis_value;......"
|
||
|
; where "section" represents one from the sections above
|
||
|
; Example: chan.control
|
||
|
; Message* m = new Message("chan.control");
|
||
|
; m->addParam("targetid","cpuload");
|
||
|
; m->addParam("component","cpuload");
|
||
|
; m->addParam("operation",monitor); // One of the following : kernelLoad,userLoad,totalLoad,systemLoad
|
||
|
; m->addParam("engine","interval_name,threshold_value,hysteresis_value;...... ");
|
||
|
; Engine::enqueue(m); // Engine::dispatch(m);
|
||
|
|
||
|
; NOTE! : Target "engine" is reserved for engine call accept. If you want to modify engine monitors
|
||
|
; or intervals please do it form manager.conf
|
||
|
|
||
|
;[kernelLoad]
|
||
|
; YATE CPU kernel-space load settings
|
||
|
|
||
|
|
||
|
;[userLoad]
|
||
|
; YATE CPU user-space load settings
|
||
|
|
||
|
|
||
|
;[totalLoad]
|
||
|
; YATE CPU load settings
|
||
|
|
||
|
|
||
|
;[systemLoad]
|
||
|
; System CPU load settings
|
||
|
|
||
|
|