retronetworking
/
wanpipe
13
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
wanpipe/ChangeLog.stable

278 lines
9.0 KiB
Plaintext
Raw Blame History

------------------------------------------------------------------------------
WANPIPE
Linux Voice TDM/WAN Router Package
------------------------------------------------------------------------------
Author: Nenad Corbic <ncorbic@sangoma.com>
Copyright (c) 1995-2008 Sangoma Technologies Inc.
------------------------------------------------------------------------------
* Thu Jan 18 2008 Nenad Corbic <ncorbic@sangoma.com> - Stable - 3.2.2
========================================================================
- AFT Maxim Front end update
Implemented graceful recovery on short circuit.
- AFT Driver update
Added a check for TDM IRQ timeout.
On some machines its possible for TDM IRQ to timeout.
- SMG updated
Fixed wancfg_smg
MTU not properly set on ports 2 and up
Voice only ports were not being added to startup sequence
Updated for callweaver
- Added Zaptel 1.4 HW HDLC Support
No Sangoma zaptel patch needed with Zaptel 1.4
- Added HWEC Noise flag in wanpipe config file
- Updated SMG
- Updated E1 Unframed on Maxim Cards
- Updates for AFT PMC and MAXIM framers
PMC - lowered LOS sensitivity
Fixes fake up/down state changes on
started inactive lines.
MAXIM - lowered sensistivy
Fixes cable cross talk on 8 port cards.
- Enabled Unframed E1
- Enabled Tri-State Mode
- Fixed loopback commands
- Fixed HWEC_PERSIST_DISABLE
This option was broken in previous release
This option lets Asterisk control HWEC
on each call start/stop.
By default all hwec channels are enabled on
device startup.
- Updated SMG/SS7
- Updated loopback commands for AFT Maxim cards
- Updated for AstLinux
The make file can now build all WAN and Voice Protocols
- Fixed add_timer warnings for ALL AFT cards
Caused when a port is left in unconnected state.
- Updated legacy protocols for new front end architecture
- Updated Setup script
* Wed Oct 6 2007 Nenad Corbic <ncorbic@sangoma.com> - Stable - 3.2.1
=====================================================================
- Setup Zap Chunk Size Patch updated for Zaptel 1.4
Patch allows running zaptel in 8,16,40,80 chunk size.
However wct drivers must be removed from compilation :)
Patch is now fixed for Zaptel 1.4
- Update to All AFT drivers for 64bit 2.6.22 kernel.
Updated affects: AFT A101/2/4/8/200/400 (all cards)
The major 2.6.20+ updates extend to 64bit as well.
Previous drivers segfaulted under 2.6.22 64bit
kernels. This does not affect you if you are running
kennels lower than 2.6.22.
- Updated legacy drivers for 2.6.22 kernel
* Wed Oct 3 2007 Nenad Corbic <ncorbic@sangoma.com> - Stable - 3.2.0
=====================================================================
- The Beta 3.1.X releases has now been declared as STABLE 3.2.X
- Fixed AMI/D4 on MAXIM (A101/2/4/8D) cards
- Fixed A200/A400 tip/ring no dial tone issues.
- Fixed 2.6.22 support and above
- Fixed RPM Build post install issue
- Updated Setup install script
Option to build for zaptel: ./Setup zaptel
- Working E&M/RBS/CAS Channel Bank support for MAXIM (A101/2/4/8) cards.
- Fixed wanpipe crashing on system shutdown on some machines.
Caused by RedHat /var/lock/subsys mandatory lock file.
- New Firmware for all MAXIM Cards (A101/2/4/8D)
Firmware V33: Fixes EC Chip Security errors that can cause
PRI to go down on some computers. Firmware is backward compatible
to any previous release.
- Faxes/Modems working through hardware echo canceler.
Tested at 56K from one port to another.
New octasic update.
- Analog Network SYNC Feature for Fax Support
Analog cards can be synced to T1/E1 clock
from adjacent A101/2/4/8 cards for flawless faxing
from FXO/FXS to T1/E1.
- Known Issues:
T1/E1 High Impedance Tap for MAXIM (A101/2/4/8D) cards.
It works on original PMC A101/2/4 cards
For more info: http://wiki.sangoma.com
* Mon Oct 1 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.1.4.6
====================================================================
- Fixed Makefile for 2.6.22.9 kernel.
- Fixed all gcc4 warnings.
* Tue Sep 26 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.1.4.5
====================================================================
- Updated Setup install script
- A200/A400 Analog driver update
Fixed noise issue introduced in 3.1.4.3 release
- Updated SMG for Asterisk 1.4 & Callweaver
* Tue Sep 18 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.1.4.3
====================================================================
- A200/A400 Analog driver update
Fixed a problem where analog port starts up without
dialtone.
* Tue Sep 14 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.1.4.2
====================================================================
- Update for 2.6.22 kernel.
- wanrouter startup script update for redhat distros.
Fixes the issue on system shutdown, where wanpipe
module sometimes do not unload due to /var/lock/subsys/
lockfile check. This issue is only related or RedHat style distros.
* Tue Aug 15 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.1.4
====================================================================
- Added A101-SH old config support.
So onld A101u or A101c config file can be used with new A101-SH cards.
- Updated KATM support in the LIP Layer.
Used to connect Kernel ATM Layer to Wanpipe ATM AAL5 layer
over all AFT cards.
- Added a sanity checker for enabling HWEC.
Used to prevent duble hwec enable.
- Added wancfg_tdmapi configurator
- Updated SMG
* Mon Jun 30 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.1.3
====================================================================
- Update to Ocatsic Hardware Echo Canceler Library
Turned of the NOISE suppression because it can interfere
with faxes. If you faxes did not work properly on 3.1.2
release they will work fine with this one.
- Cleaned up the Setup installation script.
* Mon Jun 16 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.1.2
====================================================================
- Update to Octasic Hardware Echo Canceler library
This is a very important update that affects all AFT cards
with octasic hardware echo canceler. The new octasic update
fixes faxing/modem issues over octasic hwec. The previous
release contained a bug that limited the faxing/modem speeds
to 26k. The new update properly detects fax/modem and works
with full speed of 33k fax and 56k modem.
- A200/A400 Updated
This update fixes the offhook startup failure.
On startup if fxs is offhook driver will start correctly
- Wanpipe Startup order changed
The wanpipe startup scripts on bootup were previously
set too early "S03wanrouter". This caused unpredictable
behaviour on some systems. We have now moved wanrouter
startup on boot up to "S11wanrouter", after networking
code.
- Zaptel Adjustable Chunk Size Feature
Wanpipe drivers can work with 1,2,5 and 10ms
chunk size. Zaptel also supports this, however
the wct4xx driver breaks compilation when chunk
size is changed. ./Setup can how change the
zaptel chunk size for you and update zaptel
Makefiles to remove wct4xx driver out.
Zaptel with 1ms generates 1000 interrupts per sec
Zaptel with 10ms generates 100 interrupts per sec.
As you can see its a drastic interrupt performance
increase.
NOTE: This breaks software echo cancelation, but
its not needed since we have hwec.
* Fri Jun 06 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.1.1
====================================================================
- A101/2/4/8 (MAXIM) AFT Update IMPORTANT
A major bug fix for AFT Maxim E1 cards for E1 CRC4 Mode.
On some lines the E1/CRC4 mode causes line errors on
the telco side which results in PRI not coming up.
Symptiom: E1 is up (no alarms) on local side but pri is
not coming up! (Only in E1 CRC4 Mode)
- A101/2/4/8 (MAXIM) Mandatory Firmware Update
An echo canceler bug has been fixed for all AFT
MAXIM Cards A101/2/4/8dm. New firmware version is V31.
If you are running MAXIM cards with hwec wiht older
firmware version you must upgrade.
- Updated SMG
Fixed DTMF synchronization
- Updated SMG
Fixed DTMF synchronization
* Fri Jun 06 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.1.0.1
====================================================================
- Minor release
- Contains zaptel patch for zaptel 1.2.17 and above.
- No driver changes
* Fri May 17 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.1.0
====================================================================
- Major new BETA wanpipe release
Changed wanpipe versioning:
Release: A.B.C.D
A - Major Relase number
B - Indicates Stable or Beta
Odd number is Beta
Even number is Stable
C - Minor Release number
D - Optional pre-release and custom releases
- Fixed RBS Support for all Maxim cards A101/2/4/8.
- Support for 2.6.20 kernels.
- Support for New: A101D A102D A104D Maxim cards
:
- Support for New: AFT 56K DDS card
- Redesigned TDM API Events
- TDM API Analog Support
Reference in New Issue View Git Blame Copy Permalink