94 lines
2.2 KiB
Plaintext
94 lines
2.2 KiB
Plaintext
;comment
|
|
;See http://wiki.sangoma.com/SmgPriAdvancedOptions for more details
|
|
|
|
;Debug Logging
|
|
;possible values:(yes/no)
|
|
;default:no
|
|
;This can result to a lot of prints in the logs, do not enable this unless advised to do so by Sangoma Tech Support.
|
|
|
|
debug_log=no
|
|
|
|
;Boost Logging
|
|
;possible values:(yes/no)
|
|
;default:no
|
|
;This can result to a lot of prints in the logs, do not enable this unless advised to do so by Sangoma Tech Support.
|
|
boost_log=no
|
|
|
|
;Verbosity
|
|
;possible values:(1-10)
|
|
;default:0
|
|
;Recommended value for production is 3, for debugging 5
|
|
;verbose=3
|
|
|
|
;Trunkgroup
|
|
;possible values:(1-32)
|
|
;group=1
|
|
|
|
;D-Channel logging
|
|
;possible values:(yes/no/q931/q921)
|
|
;log file will be in /var/log/sangoma_pri/dchan_N.log, where N is the span Number.
|
|
;default:no
|
|
;example:dchan_log=yes
|
|
dchan_log=no
|
|
|
|
;Switchtype
|
|
;possible values:(national/dms100/5ess/euroisdn)
|
|
;default:national
|
|
;example:switchtype=national
|
|
|
|
;Prefixes
|
|
;These will prepend the calling number on incoming calls based on the Type of Number(TON) and Numbering Plan Identification(NPI).
|
|
;See http://wiki.sangoma.com/SmgPriAdvancedOptions for more details
|
|
;
|
|
;national_prefix
|
|
;international_prefix
|
|
;unknown_prefix
|
|
;private_prefix
|
|
;local_prefix
|
|
;
|
|
;examples:
|
|
;national_prefix=01
|
|
;international_prefix=011
|
|
|
|
;Dialplan
|
|
;These will set the Type of Number(TON) and Numbering Plan Identification(NPI) on outgoing calls.
|
|
;See http://wiki.sangoma.com/SmgPriAdvancedOptions for more details
|
|
;
|
|
;possible values:(unknown/national/international/local/private/auto)
|
|
;
|
|
;examples:
|
|
;callingparty_dialplan:national
|
|
;calledparty_dialplan=auto
|
|
;redirectingnumber_dialplan=international
|
|
|
|
;Spans
|
|
;possible values:(1-32)
|
|
;examples:
|
|
;spans=1
|
|
;spans=1-5
|
|
;spans=1-5,7
|
|
|
|
;Channels
|
|
;possible values:(s1c1-s1c23 for T1, s1c1-s1c15,s1c17-s1c31 for E1)
|
|
;This is used when fractional mode is required, or multiple trunkgroups per span are required.
|
|
;examples:
|
|
;chans=s1c1-s1c23,s2c1-s2c23
|
|
;
|
|
;Note:chans and spans cannot be used for the same span, i.e spans=1 will give the same result as chans=s1c1-s1c23 for a T1 span,
|
|
;So configs like:
|
|
;
|
|
; spans=1
|
|
; chans=s2c1-s2c24
|
|
;And
|
|
; chans=s1c1-s1c24
|
|
; spans=2
|
|
;
|
|
;Will give the exact same result
|
|
;
|
|
;Using a config like:
|
|
; spans=1
|
|
; chans=s1c1-s1c20
|
|
;Will result to an error, because the same channels are specified twice
|
|
|
|
|