90 lines
2.9 KiB
Plaintext
90 lines
2.9 KiB
Plaintext
# ============================================================================
|
|
# WAN Router Configuration File.
|
|
# ============================================================================
|
|
# Protocol: Cisco HDLC (CHDLC): PRIMARY Port Configuration
|
|
# ----------------------------------------------------------------------------
|
|
|
|
|
|
[devices]
|
|
wanpipe1 = WAN_ASYHDLC, Async HDLC
|
|
|
|
|
|
[interfaces]
|
|
|
|
wp1_chdlc = wanpipe1, ,API, PRI port connection (high speed 2Mbps)
|
|
|
|
|
|
[wanpipe1]
|
|
|
|
CARD_TYPE = S51X
|
|
S514CPU = A # S514 PCI Card CPU: A or B (s514 only)
|
|
AUTO_PCISLOT = YES # Autodetect pci slot (s514 only)
|
|
PCISLOT = 5
|
|
PCIBUS = 0
|
|
|
|
CommPort = PRI # PRI: High speed (2 MBps) primary port
|
|
# SEC: Low speed (512 MBps) secondary port
|
|
#
|
|
|
|
Firmware = /etc/wanpipe/firmware/asy514.sfm # adapter firmware
|
|
|
|
#
|
|
# ----- Physical interface configuration -----
|
|
Interface = RS232 # physical interface type, RS232/V35
|
|
Clocking = Internal # Tx/Rx clock source, External/Internal
|
|
#
|
|
# * Jumpers must be set for internal or external
|
|
# clocking for:
|
|
# s508 : RS232 SEC port
|
|
# s514 : RS232 PRI and SEC port
|
|
#
|
|
#
|
|
BaudRate = 19200 # data transfer rate in bps, 1200..2048000
|
|
# Note: Max 256KBps for RS232 interface !!!
|
|
#
|
|
|
|
Receive_only = NO #
|
|
|
|
|
|
# ----- Media-specific configuration ---------
|
|
MTU = 1500 # maximum data transfer unit, bytes
|
|
TTL = 0x7F # Time To Live parameter for UDP packets
|
|
UDPPORT = 9000 # UDP Port, used by cpipemon debugger
|
|
|
|
|
|
|
|
[wp1_chdlc]
|
|
|
|
# --------- Link Management parameters ---------
|
|
MULTICAST = NO # Enable Multicasting
|
|
|
|
ASYNC_MODE = YES # Enables Async mode
|
|
|
|
#PROTOCOL_OPTIONS
|
|
#define ASY_RTS_HS_FOR_RX 0x0001 /* RTS handshaking is used for reception control */
|
|
#define ASY_XON_XOFF_HS_FOR_RX 0x0002 /* XON/XOFF handshaking is used for reception control */
|
|
#define ASY_XON_XOFF_HS_FOR_TX 0x0004 /* XON/XOFF handshaking is used for transmission control */
|
|
#define ASY_DCD_HS_FOR_TX 0x0008 /* DCD handshaking is used for transmission control */
|
|
#define ASY_CTS_HS_FOR_TX 0x0020 /* CTS handshaking is used for transmission control */
|
|
#define ASY_HDLC_FRAMING 0x0100 /* use HDLC framing */
|
|
#define ASY_HDLC_PASS_RX_CRC_TO_APP 0x0200 /* pass received HDLC CRC bytes to the application */
|
|
#define ASY_HDLC_PASS_RX_BAD_TO_APP 0x0400 /* pass received bad frames to the application */
|
|
#define ASY_DIS_RX_WHEN_TX 0x1000 /* disable the receiver when transmitting */
|
|
|
|
#PROTOCOL_OPTIONS = 0x1500
|
|
PROTOCOL_OPTIONS = 0x0500
|
|
|
|
TX_BITS_PER_CHAR = 8
|
|
RX_BITS_PER_CHAR = 8
|
|
STOP_BITS = ONE
|
|
PARITY = NONE
|
|
BREAK_TIMER = 500
|
|
INTER_CHAR_TIMER = 300
|
|
RX_COMPLETE_LENGTH = 1
|
|
XON_CHAR = 0xFE
|
|
XOFF_CHAR = 0xFF
|
|
|
|
|
|
|
|
#--------------------- END OF WANPIPE CONFIGURATION ------------------------
|