262 lines
4.4 KiB
Groff
262 lines
4.4 KiB
Groff
|
|
.TH PPIPEMON 8 "MARCH 1998" Linux "User Manuals"
|
|
.SH NAME
|
|
ppipemon \- PPP Monitor for Sangoma WAN Cards
|
|
.SH SYNOPSIS
|
|
.B ppipemon {
|
|
.I option
|
|
.B } ip-address upd-port
|
|
|
|
.B For flushing specific monitor statistics:
|
|
|
|
.B \tppipemon [
|
|
.I f
|
|
.B ] {
|
|
.I option
|
|
.B } ip-address udp-port
|
|
|
|
.B For running FT1 specific monitor commands:
|
|
|
|
.B \tppipemon [
|
|
.I t
|
|
.B ] {
|
|
.I option
|
|
.B }
|
|
.B ip-address udp-port
|
|
|
|
.SH DESCRIPTION
|
|
.B ppipemon
|
|
is a UDP management monitor for PPP. The above section demonstrates the different ways of running the ppipemon command. We will discuss each method in detail below:
|
|
|
|
.TP
|
|
.I ppipemon {option} ip-address udp-port
|
|
|
|
.TP
|
|
.B ip-address
|
|
Specify the Point-to-Point address of your defined PPP interface. To verify this run ifconfig.
|
|
|
|
.TP
|
|
.B udp-port
|
|
Specify the udp-port as defined in device section of the router.conf in /etc directory. No value for this defaults to 9000.
|
|
|
|
.TP
|
|
.B option
|
|
The following are the different monitoring options available to the user:
|
|
.IP
|
|
.B g
|
|
Display PPP general configuration.
|
|
|
|
.IP
|
|
.B u
|
|
Display PPP timers and counters.
|
|
|
|
.IP
|
|
.B a
|
|
Display PPP authentication configuration.
|
|
|
|
.IP
|
|
.B i
|
|
Display IP configuration.
|
|
|
|
.IP
|
|
.B x
|
|
Display IPX configuration.
|
|
|
|
.IP
|
|
.B s
|
|
Display PPP FSM current state.
|
|
|
|
.IP
|
|
.B n
|
|
Display parameters negotiated on last connection or attempt.
|
|
|
|
.IP
|
|
.B c
|
|
Display cause for last disconnection.
|
|
|
|
.IP
|
|
.B c
|
|
Display Communications error statistics.
|
|
|
|
.IP
|
|
.B m
|
|
Display modem status.
|
|
|
|
.IP
|
|
.B q
|
|
Run Line trace displaying PPP data.
|
|
|
|
.IP
|
|
.B qr
|
|
Run Line trace displaying Raw data.
|
|
|
|
.IP
|
|
.B ds
|
|
Display If_Send Driver statistics.(mainly used for debugging purposes)
|
|
|
|
.IP
|
|
.B di
|
|
Display Interrupt Driver statistics.(mainly used for debugging purposes)
|
|
|
|
.IP
|
|
.B dg
|
|
Display General Driver statistics.(mainly used for debugging purposes)
|
|
|
|
.IP
|
|
.B j
|
|
Display the time since last "router start".
|
|
|
|
.IP
|
|
.B l
|
|
Display General statistics.
|
|
|
|
.IP
|
|
.B e
|
|
Display Communication Error statistics.
|
|
|
|
.IP
|
|
.B p
|
|
Display Packet statistics.
|
|
|
|
.IP
|
|
.B r
|
|
Display LCP statistics.
|
|
|
|
.IP
|
|
.B b
|
|
Display Loopback detection/ LCP error statistics.
|
|
|
|
|
|
.IP
|
|
.B o
|
|
Display IP Control Protocol (IPCP) statistics.
|
|
|
|
.IP
|
|
.B y
|
|
Display IPX Control Protocol (IPXCP) statistics.
|
|
|
|
.IP
|
|
.B w
|
|
Display Password Authentication Protocol (PAP) statistics.
|
|
|
|
.IP
|
|
.B h
|
|
Display Challenge-Handshake Authentication Protocol (CHAP) statistics.
|
|
|
|
.TP
|
|
.I ppipemon f {option} ip-address udp-port
|
|
|
|
.TP
|
|
.B f
|
|
This option flushes all the values associated with the command specified in the option field.
|
|
|
|
.TP
|
|
.B ip-address
|
|
Specify the Point-to-Point address of your defined PPP interface. To verify this run ifconfig.
|
|
|
|
.TP
|
|
.B udp-port
|
|
Specify the udp-port as defined in device section of the router.conf in /etc directory. No value for this defaults to 9000.
|
|
|
|
.TP
|
|
.B option
|
|
The following are the different options available to the user:
|
|
|
|
.IP
|
|
.B l
|
|
Flush General statistics.
|
|
|
|
.IP
|
|
.B e
|
|
Flush Communication Error statistics.
|
|
|
|
.IP
|
|
.B p
|
|
Flush Packet statistics.
|
|
|
|
.IP
|
|
.B r
|
|
Flush LCP statistics.
|
|
|
|
.IP
|
|
.B b
|
|
Flush Loopback detection/ LCP error statistics.
|
|
|
|
|
|
.IP
|
|
.B o
|
|
Flush IP Control Protocol (IPCP) statistics.
|
|
|
|
.IP
|
|
.B y
|
|
Flush IPX Control Protocol (IPXCP) statistics.
|
|
|
|
.IP
|
|
.B w
|
|
Flush Password Authentication Protocol (PAP) statistics.
|
|
|
|
.IP
|
|
.B h
|
|
Flush Challenge-Handshake Authentication Protocol (CHAP) statistics.
|
|
|
|
.IP
|
|
.B d
|
|
Flush all driver specific statistics.
|
|
|
|
|
|
.TP
|
|
.I ppipemon t {option} ip-address udp-port
|
|
|
|
.TP
|
|
.B t
|
|
This option allows execution of FT1 specific commands specified in the option field.
|
|
|
|
.TP
|
|
.B ip-address
|
|
Specify the Point-to-Point address of your defined PPP interface. To verify this run ifconfig.
|
|
|
|
.TP
|
|
.B udp-port
|
|
Specify the udp-port as defined in device section of the router.conf in /etc directory. No value for this defaults to 9000.
|
|
|
|
.TP
|
|
.B option
|
|
The following are the different FT1 monitoring options available to the user:
|
|
|
|
.IP
|
|
.B v
|
|
View status of the FT1 CSU/DSU.
|
|
|
|
.IP
|
|
.B s
|
|
Perform self test on the FT1.
|
|
|
|
.IP
|
|
.B l
|
|
Peform Line Loop test on the FT1.
|
|
|
|
.IP
|
|
.B d
|
|
Perform Digital Loop test on the FT1.
|
|
|
|
.IP
|
|
.B r
|
|
Perform Remote test on the FT1.
|
|
|
|
.IP
|
|
.B o
|
|
Place FT1 in Operational mode.
|
|
|
|
.SH EXAMPLES
|
|
The following are few examples to illustrate the different usage of the ppipemon command:
|
|
.TP
|
|
ppipemon e 192.168.1.27 9002 : This displays the communications error statistics.
|
|
.TP
|
|
ppipemon f e 192.138.1.27 9005: This flushes the communications error statistics.
|
|
.TP
|
|
ppipemon t l 192.128.1.27 9004: This runs the line loop test on a FT1 board.
|
|
|
|
.SH AUTHOR
|
|
.I Jaspreet Singh <jaspreet@sangoma.com>
|
|
Sangoma Technologies Inc., www.sangoma.com
|