119 lines
2.6 KiB
Plaintext
119 lines
2.6 KiB
Plaintext
;===========================================
|
|
; Global Configuration Section
|
|
;===========================================
|
|
|
|
[settings]
|
|
|
|
;Debug flags is used to enable/disable
|
|
;woomera channel debugging level.
|
|
;Production: set to 2
|
|
;Debugging: set to 3
|
|
;------------------------------
|
|
debug=2
|
|
|
|
|
|
;===========================================
|
|
;Default Profile Configuration Section
|
|
;===========================================
|
|
|
|
[default]
|
|
|
|
;Woomera Server IP Address
|
|
;This is the remote ip address of the
|
|
;Woomera Server (sangoma_mgd: SMG)
|
|
;By default both Asterisk and SMG
|
|
;will reside on same machine.
|
|
;------------------------------
|
|
host=localhost
|
|
|
|
|
|
;Woomera Server TCP/IP Port
|
|
;This is the remote port number of the
|
|
;Woomera Server (sangoma_mgd: SMG)
|
|
;------------------------------
|
|
port=42420
|
|
|
|
|
|
;IP address of remote SMG Audio Server
|
|
;(sangoma_mgd:SMG)
|
|
;By default both Asterisk and SMG
|
|
;will reside on same machine.
|
|
;------------------------------
|
|
audio_ip=127.0.0.1
|
|
|
|
|
|
;Incoming Context for Woomera Channels
|
|
;All incoming calls will be forwared to defined
|
|
;context in extensions.conf
|
|
;------------------------------
|
|
context=sangoma
|
|
|
|
|
|
;Debug flags is used to enable/disable woomera channel
|
|
;debugging level.
|
|
;Production: set to 2
|
|
;Debugging: set to 3
|
|
;------------------------------
|
|
debug=2
|
|
|
|
|
|
;Hard limit for woomera channels
|
|
;Woomera channel driver will only allow defined
|
|
;number of channels. Set this value based on
|
|
;number of T1/E1 channels supported.
|
|
;If unsure set this value to 0.
|
|
;Options: 1 to 600 - limited calls
|
|
; 0 - unlimited Calls
|
|
;------------------------------
|
|
;max_calls=0
|
|
|
|
|
|
;Enable Incoming DTMF detection
|
|
;This option will enable Rx DTMF detection on each
|
|
;channel. The Tx DTMF is automatically enabled on SMG.
|
|
;If you dont need DTMF do not enable it.
|
|
;Options: 1 - Enable DTMF
|
|
; 0 - Disable DTMF
|
|
;------------------------------
|
|
dtmf_enable=1
|
|
|
|
|
|
;Enable Jitter buffer for this profile
|
|
;This option is tied to the above global
|
|
;jitter buffer options.
|
|
;NOTE: a jb patch must be applied to Asterisk.
|
|
;Options: 1 - Enable JitterBuffer
|
|
; 0 - Disable JitterBuffer
|
|
;------------------------------
|
|
jb_enable=0
|
|
|
|
|
|
;Enable Asterisk Progress Messaging
|
|
;Used for Asterisk Early Audio with
|
|
;Zap and SIP.
|
|
;Options: 1 - Enable ProgresMsg
|
|
; 0 - Disable ProgresMsg
|
|
;------------------------------
|
|
progress_enable=0
|
|
|
|
|
|
;Coding is necessary to identify
|
|
;ulaw/alaw rx/tx gain.
|
|
;Opionts: ulaw
|
|
; alaw
|
|
;Adjust rx and tx gain
|
|
;Options: 0 - Disable
|
|
; 1.0-X.0 - Gain
|
|
;------------------------------
|
|
;coding=ulaw
|
|
;rxgain=0.0
|
|
;txgain=0.0
|
|
|
|
|
|
;These options are used to disable rx or tx paths.
|
|
;Should not be used.
|
|
;-------------------------------
|
|
;inbound=no
|
|
;outbound=no
|
|
|