881 lines
31 KiB
Plaintext
881 lines
31 KiB
Plaintext
%define KERNEL_VERSION %{?kern_ver}
|
|
%define WANPIPE_VER wanpipe
|
|
%define name %{WANPIPE_VER}
|
|
%define version 7.0.10
|
|
%define release 0
|
|
%define serial 1
|
|
%define UTILS_DIR /usr/sbin
|
|
%define PROD_HOME /etc/wanpipe
|
|
%define WANCFG_LIBS_DIR /etc/wanpipe/lib
|
|
%define API_DIR /etc/wanpipe/api
|
|
%define DOCS_DIR /usr/share/doc/wanpipe
|
|
%define PROD wanrouter
|
|
%define MODULES_DIR /lib/modules
|
|
%define META_CONF %{PROD_HOME}/%{PROD}.rc
|
|
%define WAN_INTR_DIR %{PROD_HOME}/interfaces
|
|
%define WAN_CONF_DIR %{PROD_HOME}
|
|
%define PROD_CONF %{WAN_CONF_DIR}/wanpipe1.conf
|
|
%define START_SCRIPT S07%{PROD}
|
|
%define OLD_START S07router
|
|
%define STOP_SCRIPT K90%{PROD}
|
|
%define OLD_STOP K900router
|
|
%define ROUTER_RC %{META_CONF}
|
|
%define WANROUTER_STARTUP_SMPL %{PROD_HOME}/samples/wanrouter
|
|
%define WANROUTER_STARTUP /usr/sbin/wanrouter
|
|
%define NEW_IF_TYPE NO
|
|
%define PROD_INIT /usr/sbin/
|
|
|
|
|
|
Summary: Sangoma WANPIPE package for Linux. It contains the WANPIPE kernel drivers and configuration/startup/debugging utilities for Linux.
|
|
Name: %{name}-%{?kern_ver}
|
|
Version: %{version}
|
|
Release: %{release}
|
|
License: GPL
|
|
Group: Applications/Communications
|
|
Vendor: Sangoma Technologies Inc.
|
|
Url: www.sangoma.com
|
|
Group: Networking/WAN
|
|
|
|
|
|
%description
|
|
Linux Drivers for Sangoma AFT Series of cards and S Series of Cards. Wanpipe supports the following protocols, TDM Voice, Frame Relay, X25(API), PPP, Multi-link PPP, CHDLC and custom API development for WAN and Voice.
|
|
|
|
%prep
|
|
|
|
%build
|
|
|
|
%install
|
|
|
|
%clean
|
|
|
|
%postun
|
|
|
|
echo "Uninstalling WANPIPE..."
|
|
|
|
# ----------------------------------------------------------------------------
|
|
# Remove initialization scripts.
|
|
# ----------------------------------------------------------------------------
|
|
remove_init()
|
|
{
|
|
# Examine system bootstrap files.
|
|
if [ -d /etc/rc0.d ]
|
|
then RC_DIR=/etc
|
|
elif [ -d /etc/rc.d/rc0.d ]
|
|
then RC_DIR=/etc/rc.d
|
|
else return 0
|
|
fi
|
|
|
|
echo "Removing start-up scripts..."
|
|
rm -f $RC_DIR/rc2.d/%{START_SCRIPT}
|
|
rm -f $RC_DIR/rc3.d/%{START_SCRIPT}
|
|
rm -f $RC_DIR/rc4.d/%{START_SCRIPT}
|
|
rm -f $RC_DIR/rc5.d/%{START_SCRIPT}
|
|
|
|
rm -f $RC_DIR/rc0.d/%{STOP_SCRIPT}
|
|
rm -f $RC_DIR/rc1.d/%{STOP_SCRIPT}
|
|
rm -f $RC_DIR/rc6.d/%{STOP_SCRIPT}
|
|
|
|
rm -f $RC_DIR/init.d/%{PROD}
|
|
return 0
|
|
}
|
|
|
|
#remove start-on-boot scripts
|
|
remove_init;
|
|
|
|
%post
|
|
|
|
# ----------------------------------------------------------------------------
|
|
# Create meta-configuration file.
|
|
# ----------------------------------------------------------------------------
|
|
create_metaconf()
|
|
{
|
|
local response
|
|
|
|
# Select directory for the log file.
|
|
if [ -d /var/log ]; then
|
|
LOG_FILE=/var/log/%{PROD}
|
|
elif [ -d /var/adm wanpipe1]; then
|
|
LOG_FILE=/var/adm/%{PROD}
|
|
else
|
|
LOG_FILE=%{PROD_HOME}/%{PROD}.log
|
|
fi
|
|
|
|
# Select directory for the lock file.
|
|
if [ -d /var/lock/subsys ]; then
|
|
LOCK_FILE=/var/lock/subsys/%{PROD}
|
|
elif [ -d /var/lock ]; then
|
|
LOCK_FILE=/var/lock/%{PROD}
|
|
else
|
|
LOCK_FILE=$PROD_HOME/%{PROD}.lck
|
|
fi
|
|
|
|
|
|
cat > %{META_CONF} << ENDOFTEXT
|
|
#!/bin/sh
|
|
# wanrouter.rc WAN router meta-configuration file.
|
|
#
|
|
# This file defines variables used by the router shell scripts
|
|
# and should be located in /etc/wanpipe directory. These are:
|
|
#
|
|
# ROUTER_BOOT = Boot flag (YES/NO).
|
|
# WAN_CONF_DIR = Where to put wanpipe config files.
|
|
# WAN_INTR_DIR = Where to put wanpipe interface files.
|
|
# WAN_LOG = Where to put start-up log file.
|
|
# WAN_LOCK = File used as a lock.
|
|
# WAN_LOCK_DIR =
|
|
# WAN_IP_FORWARD = Enable IP Forwarding on startup.
|
|
# WAN_DEVICES = Name of the wanpipe devices to be
|
|
# loaded on 'wanrouter start'
|
|
# (ex: "wanpipe1 wanpipe2 wanpipe3...")
|
|
#
|
|
# Note: Name of wanpipe devices correspond
|
|
# to the configuration files in
|
|
# WANPIPE_CONF_DIR directory:
|
|
# (ex. /etc/wanpipe/wanpipe1.conf )
|
|
#
|
|
# Note: This file is 'executed' by the shell script, so
|
|
# the usual shell syntax must be observed.
|
|
ENDOFTEXT
|
|
echo "ROUTER_BOOT=YES" >> %{META_CONF}
|
|
echo "WAN_CONF_DIR=%{WAN_CONF_DIR}" >> %{META_CONF}
|
|
echo "WAN_INTR_DIR=%{WAN_INTR_DIR}" >> %{META_CONF}
|
|
echo "WAN_LOG=$LOG_FILE" >> %{META_CONF}
|
|
echo "WAN_LOCK=$LOCK_FILE" >> %{META_CONF}
|
|
echo "WAN_LOCK_DIR=/var/lock/subsys" >> %{META_CONF}
|
|
echo "WAN_IP_FORWARD=NO" >> %{META_CONF}
|
|
echo "NEW_IF_TYPE=NO" >> %{META_CONF}
|
|
echo "WAN_LIB_DIR=/etc/wanpipe/lib" >> %{META_CONF}
|
|
echo "WAN_ADSL_LIST=/etc/wanpipe/wan_adsl.list" >> %{META_CONF}
|
|
echo "WAN_ANNEXG_LOAD=NO" >> %{META_CONF}
|
|
echo "WAN_LIP_LOAD=YES" >> %{META_CONF}
|
|
echo "WAN_DYN_WANCONFIG=NO" >> %{META_CONF}
|
|
echo "WAN_SCRIPTS_DIR=/etc/wanpipe/scripts" >> %{META_CONF}
|
|
echo "WAN_FIRMWARE_DIR=/etc/wanpipe/firmware" >> %{META_CONF}
|
|
echo "WAN_DEVICES_REV_STOP_ORDER=YES" >> %{META_CONF}
|
|
echo "WAN_DEVICES=\"wanpipe1\"" >> %{META_CONF}
|
|
|
|
|
|
return 0
|
|
}
|
|
|
|
|
|
# ----------------------------------------------------------------------------
|
|
# Install initialization scripts.
|
|
# ----------------------------------------------------------------------------
|
|
install_init()
|
|
{
|
|
#Examine system bootstrap files.
|
|
if [ -d /etc/rc0.d ]
|
|
then RC_DIR=/etc
|
|
elif [ -d /etc/rc.d/rc0.d ]
|
|
then RC_DIR=/etc/rc.d
|
|
else return 0
|
|
fi
|
|
|
|
PROD_INIT=%{PROD_INIT}%{PROD}
|
|
|
|
# Install start scripts.
|
|
[ -d $RC_DIR/rc2.d ] && ln -sf $PROD_INIT $RC_DIR/rc2.d/%{START_SCRIPT}
|
|
[ -d $RC_DIR/rc3.d ] && ln -sf $PROD_INIT $RC_DIR/rc3.d/%{START_SCRIPT}
|
|
[ -d $RC_DIR/rc5.d ] && ln -sf $PROD_INIT $RC_DIR/rc4.d/%{START_SCRIPT}
|
|
[ -d $RC_DIR/rc5.d ] && ln -sf $PROD_INIT $RC_DIR/rc5.d/%{START_SCRIPT}
|
|
|
|
# Install stop scripts.
|
|
[ -d $RC_DIR/rc0.d ] && ln -sf $PROD_INIT $RC_DIR/rc0.d/%{STOP_SCRIPT}
|
|
[ -d $RC_DIR/rc1.d ] && ln -sf $PROD_INIT $RC_DIR/rc1.d/%{STOP_SCRIPT}
|
|
[ -d $RC_DIR/rc6.d ] && ln -sf $PROD_INIT $RC_DIR/rc6.d/%{STOP_SCRIPT}
|
|
[ -d $RC_DIR/init.d ] && ln -sf $PROD_INIT $RC_DIR/init.d/%{PROD}
|
|
|
|
return 0
|
|
}
|
|
|
|
if [ -d "/usr/local/wanrouter" ]; then
|
|
cat <<EOM
|
|
*** Previous installation of Wanpipe detected.
|
|
Please use /usr/sbin/wancfg instead of /usr/local/wanrouter/wancfg
|
|
for Wanpipe configuration.
|
|
The new configuration files will be saved in /etc/wanpipe
|
|
and /etc/wanpipe/interfaces directories.
|
|
|
|
EOM
|
|
else
|
|
echo 'no old wanpipe detected' > /dev/null
|
|
|
|
fi
|
|
|
|
cat <<EOM
|
|
*** Sangoma Wanpipe was successfully installed.
|
|
Run wancfg command to configure wanpipe.
|
|
Refer to %{DOCS_DIR} for documentation.
|
|
|
|
Docs: README-2.config
|
|
README-3.operation
|
|
README-4.debugging
|
|
|
|
Hardware Probe: /usr/sbin/wanrouter hwprobe
|
|
Wanpipe Config: /usr/sbin/wancfg
|
|
Wanpipe Start : /usr/sbin/wanrouter start
|
|
|
|
EOM
|
|
#check dependancies for the new modules
|
|
depmod -a >> /dev/null 2>> /dev/null
|
|
echo
|
|
modprobe wanrouter
|
|
if [ $? -eq 0 ]; then
|
|
modprobe -r wanrouter 2>> /dev/null
|
|
else
|
|
echo "Failed to load wanpipe modules!"
|
|
echo
|
|
echo "Make sure you are installing correct RPMS for you system!"
|
|
echo
|
|
echo "Otherwise call Sangoma Tech Support"
|
|
fi
|
|
|
|
#install start-on-boot scripts
|
|
install_init;
|
|
#create wanrouter.rc in /etc/wanpipe
|
|
#create_metaconf;
|
|
\cp -f %{PROD_HOME}/wancfg_zaptel/setup-sangoma /usr/local/sbin/setup-sangoma
|
|
chmod 755 /usr/local/sbin/setup-sangoma
|
|
|
|
%files
|
|
%{MODULES_DIR}
|
|
/usr
|
|
/etc
|
|
|
|
|
|
%changelog
|
|
|
|
* Tue Feb 11 2014 Nenad Corbic <ncorbic@sangoma.com> - 7.0.10
|
|
==================================================================
|
|
|
|
- Support for Dahdi 2.9
|
|
- Fixes for DMA resync on T116 and A116 cards
|
|
Used to resync DMA in case of T1/E1 sync loos.
|
|
|
|
* Mon Jan 7 2014 Nenad Corbic <ncorbic@sangoma.com> - 7.0.9
|
|
==================================================================
|
|
|
|
- Support for Dahdi 2.8
|
|
- Support for Centos 6.5
|
|
- Support for kernels up to 3.12
|
|
- Fixes A116 clocking for dahdi when link is down
|
|
- Updates to A116 for possible NMI interrupt erros on some motherboards.
|
|
|
|
* Wed Nov 14 2013 Nenad Corbic <ncorbic@sangoma.com> - 7.0.8
|
|
==================================================================
|
|
|
|
- Updated wanpipemon to trace on multiple dchan in a single span
|
|
eg: wanpipemon -i w1g1 -chan 1 -c trd
|
|
If chan is not specificed then all dchans will be traced together.
|
|
- Updated sample tapping application.
|
|
Allow configuration for dchan and seven bit hdlc
|
|
- Fixed GSM drivers for Windows
|
|
|
|
* Mon Jul 15 2013 Nenad Corbic <ncorbic@sangoma.com> - 7.0.5
|
|
==================================================================
|
|
|
|
- Updated for Dahdi 2.7
|
|
- Fixed full dahdi startup on wanpipe dahdi mode.
|
|
|
|
* Wed May 22 2013 Nenad Corbic <ncorbic@sangoma.com> - 7.0.3
|
|
==================================================================
|
|
|
|
- Fixed file structure of sample_data_tapping application
|
|
- No driver changes from 7.0.2
|
|
|
|
|
|
* Fri May 10 2013 Nenad Corbic <ncorbic@sangoma.com> - 7.0.2
|
|
==================================================================
|
|
|
|
- Added sync error statistic in wanpipeomon Ta command
|
|
Sync error indicates clocking or synchronizatio errors
|
|
on T1/E1 lines. Provides added statistic to debug line,
|
|
slip errors on T1/E1.
|
|
|
|
- Fixed DAHDI reconfiguration issues.
|
|
running dahdi_cfg multiple times will not bring down T1/E1 link
|
|
Added config option to change clocking from MASTER to NORMAL
|
|
from dahdi system.conf
|
|
|
|
- New sample_data_tapping sample application for T116 and other
|
|
tapping boards.
|
|
|
|
|
|
* Tue Mar 19 2013 Nenad Corbic <ncorbic@sangoma.com> - 7.0.1
|
|
==================================================================
|
|
|
|
- Update to wancfg_dahdi configuration for GSM
|
|
- Update to setup-sangoma configuration for GSM
|
|
- Potential bug on digital board startup due to un-initialized variable
|
|
Introduced in 7.0.0
|
|
- Update for Centos 6.4
|
|
New kernel broke drivers
|
|
- Update the DTMF poll frequency to 10ms
|
|
This will proved much more responsive DTMF events reporting.
|
|
Adds negligible load in performance testing.
|
|
- Fixed a possible memory corruption issue on cdev write.
|
|
This could affect Linux FreeSWITCH or TDMAPI/Libsangoma Customers.
|
|
Issues have been reported by customers on very few random systems.
|
|
Finally was able to reproduce in lab and fix it for good.
|
|
Does not affect Asterisk/DAHDI.
|
|
|
|
|
|
* Thu Feb 10 2013 Nenad Corbic <ncorbic@sangoma.com> - 7.0.0
|
|
==================================================================
|
|
|
|
- Updated Major revision in order to syncronize versions with Windows.
|
|
There is no major driver change from 3.5.28 to 7.0.0
|
|
- Support for T116 16 Port T1/E1 Tapping Card
|
|
- Added sample_data_tapping application for tapping customers
|
|
wanpipe-7.0.0/api/libsangoma/examples/sample_data_tapping
|
|
- Wanpipe DAHDI Interation
|
|
Updated wanpipe dahdi integration
|
|
Allow dahdi system.conf to configure sangoma drivers
|
|
This feature removes the need for Sangoma wanpipe configuration files.
|
|
Currently this feature is being used by OEM vendors.
|
|
More information on Sangoma wiki - Asterisk Section.
|
|
- Bug fix in UBXFXO causing a kernel crash.
|
|
- Fixed for 3.5.4 kenrel
|
|
- Updated rx/tx fifo thresholds in case of excessive fifo error recovery.
|
|
- Default lowered to 50 per sec
|
|
- Allows configuration of rx/tx fifo thresholds
|
|
|
|
|
|
* Thu Aug 10 2012 Nenad Corbic <ncorbic@sangoma.com> - 3.5.28
|
|
==================================================================
|
|
|
|
- Added A116 card support
|
|
- Minor fixes for R2 CAS for NBE
|
|
|
|
* Thu May 6 2012 Nenad Corbic <ncorbic@sangoma.com> - 3.5.27
|
|
==================================================================
|
|
|
|
- GSM Bug fix for dahdi
|
|
Fixes startup issues for Asterisk/Dahdi mode.
|
|
|
|
- Wanpipe API/libsangoma device read bug on 64bit machines
|
|
This issue can cause infrequent soft lockups on some 64bit kernels
|
|
Affects FreeSWITCH and FreeTDM and libsangoma mode only.
|
|
Does not affect Asterisk/Dahdi mode.
|
|
|
|
- Fixed B700 issues related to the GSM code.
|
|
|
|
- Fixed Setup to properly build wan protocols for latest kernels.
|
|
|
|
|
|
* Tue Apr 24 2012 Nenad Corbic <ncorbic@sangoma.com> - 3.5.26
|
|
==================================================================
|
|
|
|
- Wanpipe W400 GSM support: Asterisk/Dahdi & FreeSWITCH/FreeTDM
|
|
- Wanpipe B610 FXS support
|
|
- Fixed Dahdi 2.5 and higher hwec autodetection
|
|
For dahdi 2.5 and higher the HWEC option was needed in
|
|
dahdi/system.conf to enable onboard hwec.
|
|
This fix allows default mg2 software echo to be specified
|
|
in dahdi/system.conf, and dahdi will autodetect the sangoma onboard hwec.
|
|
- Fixed sangoma hwec boards to use dahdi software ec if hwec is turned off.
|
|
Wanpipe driver did not allow sangoma hwec enabled boards to use dahdi
|
|
software ec even if hwec was turned off in wanpipe1.conf
|
|
This has now been fixed.
|
|
If TDMV_HWEC=NO is set in wanpipe1.conf dahdi will now use software ec.
|
|
- Fixed BRI dchan reliability
|
|
- Fixed BRI for 64bit
|
|
The fix for audio issue in 3.5.25 caused the issue on 64bit.
|
|
- Dahdi build bug fixes for Trixbox
|
|
- Zaptel build bug fixes from 3.5.25
|
|
- Build fixes for 3.1.X kernel.
|
|
- Fake polarity feature used for Euro Caller ID
|
|
- E1 NCRC CAS Framer Configuration for Latin America
|
|
Previous NCRC Framer config did not work in all cases.
|
|
Affects protocols such as MFC-R2 or CAS
|
|
- Analog boards with network sync option set to yes:
|
|
Default to fax mode buffering.
|
|
Use "when full" dahdi buffer policy.
|
|
Improves faxing from PRI to Analog with sync cable.
|
|
- Fixed wancfg_dahdi to:
|
|
start asterisk using safe_asterisk
|
|
to properly detect dahdi version
|
|
|
|
|
|
|
|
* Tue Feb 21 2012 Nenad Corbic <ncorbic@sangoma.com> - 3.5.25
|
|
==================================================================
|
|
|
|
- Dahdi 2.6 support
|
|
- Linux 3.2.6 support
|
|
- Support for B610 Single FXS board
|
|
- Support for B500 4 port BRI board
|
|
- Reduced memory foot print of the driver
|
|
by removing some unused statistics structures
|
|
- New HWEC firmare v1.7.4 fixes delayed fax issus
|
|
when fax is placed through the echo canceller.
|
|
- Fixed BRI noise issue: Where a BRI channel could
|
|
be started in a corrupted state.
|
|
- New A108 firmware V44
|
|
Fixes unreliable front end chip access on some
|
|
newer sandy bridge architectures.
|
|
Effect of this bug was unreliable T1/E1 link connection.
|
|
- Added verbose help on wan_ec_client
|
|
|
|
* Tue Nov 15 2011 Nenad Corbic <ncorbic@sangoma.com> - 3.5.24
|
|
==================================================================
|
|
|
|
- Bug fixes in Setup
|
|
- Bug fixes in wancfg_dahdi
|
|
- Updated scripts for Debian/Ubuntu
|
|
- Added MTP1 msu/lssu filter option
|
|
- New LINEAR mapping of A108 ports for use with T3Mux
|
|
- Updates and fixes to MTP1 engine
|
|
- Fix for potential memory leak in proc file system
|
|
- Fix for analog dma sync on 64bit kernels
|
|
- Dahdi BRI fix: wakeup of powered down line
|
|
- Fixed RPM spec for trixbox
|
|
|
|
* Wed Sep 07 2011 Nenad Corbic <ncorbic@sangoma.com> - 3.5.23
|
|
==================================================================
|
|
|
|
- Bug fixes in Setup
|
|
- Bug fixes in compiling and configufing old deprecated SMG/BRI
|
|
- Fixed rpmbuild using Setup
|
|
|
|
* Wed Aug 24 2011 Nenad Corbic <ncorbic@sangoma.com> - 3.5.22
|
|
==================================================================
|
|
|
|
- Bug introducted in .21 release for analog board.
|
|
Changed the way wanpipe enumerates analog channels
|
|
breaks backward compatibility. Reverted to original.
|
|
|
|
- Setup install script update
|
|
Removed old and legacy products out of Setup compile options.
|
|
|
|
|
|
* Tue Aug 23 2011 Nenad Corbic <ncorbic@sangoma.com> - 3.5.21
|
|
==================================================================
|
|
|
|
- T1 AMI fix
|
|
- Fixed for 2.6.39 and 3.0.1 kernels
|
|
- Fixed for dahdi 2.5
|
|
- Fixed BRI wancfg_dahdi config
|
|
- Added HW Echo Cancellation Clock failover.
|
|
If EC is using clock from port 1 and that port goes down.
|
|
The clock source will be taken from another connected port.
|
|
- Minor bug fix in hdlc test sample app
|
|
- Bug fix libsangoma: multilple wait object issue
|
|
- BRI for DAHDI
|
|
- B601 receives timing from analog port when T1 is down.
|
|
- Libsangoma ss7 hw config status
|
|
- Edge cases bug fixes on multi port restart
|
|
- Updated v44 for A104 firmware
|
|
- Analog 64bit 8GIG memory issue dma sync fix
|
|
- Support for ss7 firmware V44 on A104 only.
|
|
- Fixed logger - caused slow prints on some kernels due
|
|
to use of vprintk
|
|
- Added Global Poll IRQ mode for efficient high density
|
|
hdlc tx/rx
|
|
- wanpipemon added led blink option to idetnify port
|
|
Removed the led on/off
|
|
wanpipemon -i w1g1 -c dled_blink -timeout 10 #with timeout
|
|
wanpipemon -i w1g1 -c dled_blink #without timeout
|
|
- wanpipemon documented performance statatistics
|
|
wanpipemon -p aft
|
|
- wanpipemon added led ctrl
|
|
Used to visually identify a port from software
|
|
wanpipemon -p aft for documentation
|
|
Added this feature in libsangoma as well.
|
|
- Minor updates in wanpipe spec file
|
|
- Bug fixes in wancfg legacy
|
|
- aftpipemon fixed for 24port analog
|
|
- B601 mtu fix for FreeSWITCH
|
|
Causes audio issues
|
|
- Added performance stats
|
|
- Fixed B601 for TDMAPI & FreeSWITCH Dchannel
|
|
- Confirmed that B601 works for Asterisk (dahdi hdlc mode)
|
|
- Fixed rescan feature
|
|
- Libsangoma builds by default now
|
|
wanec utilities now depend on libsangoma
|
|
- Libsangoma contains the full wanec api
|
|
- Libsangoma wanec API for TDM API
|
|
- Added libsangoma hwec functions for Linux
|
|
- Hwec audio_mem_load added to the api.
|
|
|
|
|
|
* Mon Apr 11 2011 Nenad Corbic <ncorbic@sangoma.com> - 3.5.20
|
|
==================================================================
|
|
|
|
- Fixed customer id read
|
|
- Added hwrescan libsangoma command
|
|
- Updated the analog ring debouncing threshold
|
|
so that ring is properly debounced
|
|
- Fixed AIS alarm clear flag bug
|
|
The AIS alarm flag was not being cleared in the driver.
|
|
- New Octasic Image 1.6.2
|
|
Fix for AGC (Automatic Gain Control)
|
|
AGC now meets Microsoft Audio Quality Spec
|
|
- Fixed start script for ubuntu
|
|
|
|
* Fri Mar 1 2011 Nenad Corbic <ncorbic@sangoma.com> - 3.5.19
|
|
==================================================================
|
|
|
|
- Fixed scripts for Ubuntu
|
|
- TDM API updated Tone Event API to include tone type
|
|
DTMF, FAX_1100, FAX_2100, FAX_2100_WSPR
|
|
- Fixes for latest 2.6.36 linux kernel
|
|
- Fixes for TTY Driver for 2.6.32 linux kernel
|
|
- BRI default idle set to 0xFF so it does not interfere
|
|
with multi-port mode.
|
|
- BRI NT & TE activation/deactivation logic update.
|
|
- Dahdi Yellow alarm reporting fix
|
|
Wanpipe driver did not report yellow alarms properly to dahdi
|
|
- T1 Automatic AIS on LOS option now optional
|
|
Previoulsy the T1 code enabled automatic AIS on LOS by default.
|
|
This is now an option TE_AIS_AUTO_ON_LOS=YES|NO
|
|
Default behaviour is to send Yellow alarm on link down.
|
|
- Fixed a TE1 startup race condition bug.
|
|
It was possible for T1/E1 interrupt to occour before
|
|
configuration was completel
|
|
- Fixed wanpipe.spec for dahdi RPM build
|
|
- Added serial clock recovery feature
|
|
|
|
|
|
* Fri Nov 22 2010 Nenad Corbic <ncorbic@sangoma.com> - 3.5.18
|
|
==================================================================
|
|
|
|
- BRI Multi-Point fix idle 0xFF
|
|
- BRI fix for XEN virtualization
|
|
- Fixed front end interrupt issue
|
|
- wancfg_fs (fix the little bugs)
|
|
- update to support the latest dahdi-linux
|
|
- fix dahdi_scan, now reporting the right values instead of showing blank
|
|
- new echo canceler image
|
|
- fix for the echo canceler for A500 for freetdm mode.
|
|
HWEC will turn on when there is a call on the bri line.
|
|
- Added SW HDLC into the core. B
|
|
- B601 is now supported on FreeTDM/FreeSWITCH and TMDAPI
|
|
- Added wan_fxotune utility to utils directory
|
|
Used to tune fxo boards under TDM API or FreeSWITCH mode.
|
|
|
|
|
|
|
|
* Fri Oct 08 2010 Nenad Corbic <ncorbic@sangoma.com> - 3.5.17
|
|
===================================================================
|
|
|
|
- Critical Bug fix in WAN mode. Bug introduced in 3.5.16
|
|
|
|
|
|
* Fri Sep 27 2010 Nenad Corbic <ncorbic@sangoma.com> - 3.5.16
|
|
===================================================================
|
|
|
|
- Dahdi 2.4 Support
|
|
- Fixed BRI B500/B700 hwec enable on call start caused in 3.5.12 release.
|
|
- Bug fix in voice+data mixed mode where dchan could get stuck due to
|
|
dma overruns.
|
|
- Bug fix in tdmapi where excessive memory was allocated on pre-allocation buffers.
|
|
- Bug fix tdmapi defaults to 20ms chunk size instead of 10ms
|
|
- Bug fix broken support for A101/2 legacy EOL boards.
|
|
- New XEN Support
|
|
TDM Voice will now work properly on xen virtualized machines
|
|
- Fix for 64bit 8gig issues
|
|
- New rpmbuld spec files.
|
|
rpmbuild -tb wanpipe-3.5.16.tgz
|
|
rpmbuild -tb wanpipe-3.5.16.tgz --define 'with_dahdi 1' --define 'dahdi_dir /usr/src/dahdi'
|
|
|
|
|
|
* Fri Aug 27 2010 Nenad Corbic <ncorbic@sangoma.com> - 3.5.15
|
|
===================================================================
|
|
|
|
- Fixed B600 and B601 warning messages introduced in 3.5.14
|
|
- New Firmware for A108&A104 V43
|
|
Fixes PCI parity errors on new dell,ibm boxes
|
|
- Libsangoma added rw fe reg, and rx/tx gains
|
|
- Build script does not polute the linux source any more.
|
|
- Bug fix in B800 detect code
|
|
- Fixed wanfcg_fs for freeswitch
|
|
-
|
|
|
|
|
|
* Tue Jun 29 2010 Nenad Corbic <ncorbic@sangoma.com> - 3.5.14
|
|
===================================================================
|
|
|
|
- Fixes stop script for Asterisk 1.6.2
|
|
- Compile fix in legacy api sample code
|
|
- Skipped .13 releaes went straight to 14 :)
|
|
|
|
* Mon Jun 28 2010 Nenad Corbic <ncorbic@sangoma.com> - 3.5.12
|
|
===================================================================
|
|
|
|
- Fixed Dahdi 2.3 Support
|
|
- Fixed FreeSwitch Openzap HardHDLC option for AFT boards
|
|
- Fixed wanpipemon support for non aft boards.
|
|
- Merged USB FXO code from 3.6 release
|
|
- USB FXO bug fix for 2.6.32 kernels
|
|
- Support for B800 Analog board
|
|
- Fixed alarm reporting in DAHDI/ZAPTEL
|
|
|
|
- Added Extra EC DSP Configuration Options
|
|
HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo cancelation enabled with nlp (default)
|
|
# OCT_SPEECH: improves software tone detection by disabling NLP (echo possible)
|
|
# OCT_NO_ECHO:disables echo cancelation but allows VQE/tone functions.
|
|
HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out of incoming media (must have hwdtmf enabled)
|
|
HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on the line - could break fax
|
|
HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables acustic echo cancelation
|
|
HWEC_NLP_DISABLE = NO # NO: default YES: guarantees software tone detection (possible echo)
|
|
HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default)
|
|
HWEC_RX_AUTO_GAIN = 0 # 0: disable -40-0: default rx audio level to be maintained (-20 default)
|
|
HWEC_TX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal
|
|
HWEC_RX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal
|
|
|
|
- Added AIS BLUE Alarm Maintenance Startup option
|
|
Allows a port to be started in BLUE alarm.
|
|
|
|
TE_AIS_MAINTENANCE = NO #NO: defualt YES: Start port in AIS Blue Alarm and keep line down
|
|
#wanpipemon -i w1g1 -c Ttx_ais_off to disable AIS maintenance mode
|
|
#wanpipemon -i w1g1 -c Ttx_ais_on to enable AIS maintenance mode
|
|
|
|
- Fixed Legacy XDLC compile
|
|
- Fixed core edge case scenarios where
|
|
potential race condition could occour.
|
|
|
|
|
|
|
|
* Thu Apr 08 2010 Nenad Corbic <ncorbic@sangoma.com> - 3.5.11
|
|
===================================================================
|
|
|
|
- Fix for 2.6.31 and higher kernels
|
|
- TDM API Analog rx gain feature
|
|
- Disabled default NOISE REDUCTION feature in hwec
|
|
that was enabled in 3.5.9 release.
|
|
- Updates to T1/E1 Loopback and BERT Test
|
|
|
|
|
|
* Wed Jan 11 2010 Nenad Corbic <ncorbic@sangoma.com> - 3.5.10
|
|
===================================================================
|
|
|
|
- Release cleanup script earsed libsangoma.c during release packaging.
|
|
I have update release procedure so this does not happen again.
|
|
This release has no functionl differences aside from the missing
|
|
file from 3.5.9 release.
|
|
|
|
* Wed Dec 30 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.9
|
|
===================================================================
|
|
|
|
- New logger dev feature
|
|
- Bug fix in tx fifo handler
|
|
- Dahdi 2.2 broke wanpipe rbs support.
|
|
- Fixed free run interrupt supported on V38 (A108)
|
|
- Fixed RBS signalling for E1 channel 31
|
|
- Added Front end Reset Detection
|
|
-> Support for new A108 Firmware V40
|
|
- Fixed RTP TAP bug: Caused high system load on RTP TAP usage.
|
|
- Added excessive fifo error sanity check. Fixes random pci dma errors.
|
|
- HWEC: Increased EC VQE Delay: Fixes random fax failure due to hwec.
|
|
- HWEC: Check state before bypass enable.
|
|
- HWEC: Disable bypass on release
|
|
- HWEC: Enabled Noise Reduction by default
|
|
- HWEC: Enabled Auto Gain Control by default
|
|
- HWEC: To disable Noise Reduction and Gain control set
|
|
-> HWEC_NOISE_REDUCTION_DISABLE=NO in [wanpipe] section of wanpipe1.conf
|
|
To check if Noise Reduction or Gain control are set
|
|
-> wan_ec_client wanpipe1 stats 1
|
|
|
|
|
|
* Thu Oct 02 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.8
|
|
===================================================================
|
|
|
|
- Bug fix in sangoma_prid PRI stack for FreeSwitch & Asterisk.
|
|
There was a slow memory leak.
|
|
|
|
|
|
* Thu Sep 04 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.7
|
|
===================================================================
|
|
|
|
- New Telesoft PRI Stack Support for FreeSwitch & Asterisk
|
|
For Asterisk: The new stack uses the existing Sangoma Media Gateway
|
|
architecture currently used by SS7 and BRI.
|
|
-> run: wancfg_dahdi or wancfg_zaptel to configure
|
|
for sangoma prid stack.
|
|
|
|
For FreeSwitch: The new stack binds to openzap directly just like
|
|
current SS7 and BRI.
|
|
-> run: wancfg_fs to configure freeswitch for
|
|
sangoma prid, brid, ss7.
|
|
|
|
- Fixed Tx Tristate
|
|
|
|
- Updated yellow alarm handling for Dallas maxim boards
|
|
(A101/2/4/8)
|
|
|
|
- Autodetect USB support so that driver will compile
|
|
correctly on kernel without USB support
|
|
|
|
- Added DAHDI Red alarm for Analog
|
|
|
|
|
|
* Thu Aug 20 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.6
|
|
===================================================================
|
|
|
|
- Update to T1 Yellow Alarm handling.
|
|
In some cases Yellow alarm did not turn off poperly causing
|
|
line to stay down an board startup.
|
|
- Update configuration utility
|
|
wancfg_fs updated for sangoma_prid configuration. Added wancfg_openzap
|
|
for OpenZap Configuration
|
|
|
|
|
|
* Mon Aug 17 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.5
|
|
===================================================================
|
|
|
|
- Dahdi 2.2 Support
|
|
- BRI Update - Added T1 timer for NT module
|
|
- AFT Core Update - optimized dma ring buffer usage
|
|
- TDM API - refractoring and optimization
|
|
- Updated for 2.6.30 kernel
|
|
|
|
- New firmawre feature for A101/2/5/8: Free Run Timer Interrupt
|
|
The AFT T1/E1 boards will now provide perfect timing to zatpel/dahdi
|
|
even when the ports are not connected. The free run interrupt
|
|
will be enabled when all zaptel/dahdi ports are down, or on
|
|
inital board start. To test this feature just start a wanpipe
|
|
port with zaptel/dahdi and run zttest.
|
|
A108 firmare V38
|
|
A104/2/1/ firmware V36
|
|
|
|
- AFT T1/E1 front end update
|
|
Added OOF alarm treshold, so that line does not go down
|
|
on very first OOF alarm.
|
|
|
|
- Added module inc cound when zaptel/dahdi starts.
|
|
So wanpipe drivers do not crash if one tries to unload
|
|
zaptel/dahdi before stopping wanpipe drivers.
|
|
|
|
|
|
* Thu Jul 07 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.4.8
|
|
===================================================================
|
|
|
|
- Updated for B700 Dchan Critical Timeout
|
|
- Fix for FAX detect on PRI
|
|
- Updated for 2.6.21 kernel TASK QUEUE REMOVAL caused
|
|
unexpected behaviour.
|
|
- Updated wancfg_zaptel for fax detect
|
|
|
|
* Thu Jul 03 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.4.3
|
|
===================================================================
|
|
|
|
- Added DAHDI 2.2 Support
|
|
|
|
|
|
* Thu Jul 02 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.4.2
|
|
===================================================================
|
|
|
|
- AFT 64bit update
|
|
No need for --64bit_4G flag any more.
|
|
The 64bit check is now down in the driver.
|
|
|
|
- TDM API
|
|
Updated the Global TDM Device
|
|
This device can be used to read events an all boards configured in
|
|
TDM API mode.
|
|
|
|
- Libsangoma verion 3.1.0
|
|
Added a function to check if hwec is supported
|
|
|
|
|
|
* Tue Jun 30 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.4.1
|
|
===================================================================
|
|
|
|
- Sangoma MGD update v.1.48
|
|
Disable hwec on data calls
|
|
|
|
|
|
* Mon Jun 29 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.4
|
|
===================================================================
|
|
|
|
- E1 Voice Bug fix introduced in 3.5.3
|
|
|
|
- Removed NOISE REDUCTION enabled by default.
|
|
The noise reduction is disabled by default and should be
|
|
enabled using HWEC_NOISE_REDUCTION = YES
|
|
|
|
- Fixed libsangoma enable dtmf events functionality
|
|
|
|
|
|
|
|
* Tue Jun 25 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.3
|
|
===================================================================
|
|
|
|
- New Makefile build system
|
|
Note this does not replace Setup. Makefile build system can be
|
|
used by power users.
|
|
Asterisk
|
|
make dahdi DAHDI_DIR=<abs path to dahdi>
|
|
make install
|
|
make zaptel ZAPDIR=<abs path to zaptel>
|
|
make install
|
|
|
|
FreeSwitch
|
|
make openzap
|
|
make install
|
|
|
|
TDM API
|
|
make all_src
|
|
make install
|
|
|
|
- Updated libsangoma API
|
|
Redesigned wait object for Linux/Windows integration.
|
|
|
|
- Turned on HWEC Noise Reduction by default
|
|
To disable noise reduction specify
|
|
HWEC_NOISE_REDUCTION_DISABLE=YES in [wanpipe1] section of wanpipe
|
|
config file.
|
|
|
|
- Regression tested for FreeSwitch+OpenZAP
|
|
|
|
- Updated dma buffers in ZAPTEL and TDM API mode.
|
|
- Bug fixes for Mixed Data + Voice Mode
|
|
|
|
- Bug fix on TDM API mode.
|
|
Flush buffers could interfere with tx/rx data.
|
|
|
|
- Added BRI DCHAN monitor in case task is not scheduled by the
|
|
system. Sanity check.
|
|
- Fixed libsangoma stack overflow check that failed on some kernels.
|
|
|
|
|
|
* Fri May 08 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.2
|
|
===================================================================
|
|
|
|
- B700 PCIe boards were being displayed as PCI boards in hwprobe
|
|
- Bug fix in wancfg_zaptel
|
|
|
|
* Thu May 07 2009 Nenad Corbic <ncorbic@sangoma.com> - 3.5.1
|
|
===================================================================
|
|
|
|
- New Hardware Support
|
|
B700 - Mixed BRI & Analog
|
|
B600 - Analog 4FXO/FXS
|
|
USB-FXO - USB Fxo device
|
|
|
|
- New Unified API for Linux & Windows
|
|
API Library - libsangoma
|
|
Unified Voice API for Linux & Windows
|
|
|
|
-More Info
|
|
http://wiki.sangoma.com/wanpipe-api
|
|
|
|
- SPAN mode API
|
|
- CHAN mode API
|
|
|
|
- Unified driver for Linux & Windows
|
|
- Updated BRI Stack and Support
|
|
- New BRI A500 & B700 firmware that fixes PCI parity errors.
|
|
On some systems A500 & B700 boards can generate parity errors.
|
|
|
|
- FreeSwitch Tested
|
|
- Update for 2.6.26 kernel
|
|
|
|
Note this is a major release. It has been fully regression
|
|
tested and stress tested in the lab and in the field.
|
|
|
|
|
|
- - END -
|