retronetworking
/
wanpipe
13
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
wanpipe/rpmspec/wanpipe-mod.spec

542 lines
18 KiB
Python
Raw Blame History

%define WANPIPE_VER wanpipe-modules
%define name %{WANPIPE_VER}
%define version 3.3.12
%define release 0
%define serial 1
%define MODULES_DIR /lib/modules
%define USR_INCLUDE_DIR /usr/include
%define KVERSION %{?kern_ver}
Summary: Sangoma WANPIPE package for Linux. It contains the WANPIPE kernel drivers. Please install wanpipe-util package for wanpipe utilties and configuration files.
Name: %{name}-%{?kern_ver}
Version: %{version}
Release: %{release}
License: GPL
Group: Applications/Communications
Vendor: Sangoma Technologies Inc.
Url: www.sangoma.com
Group: Networking/WAN
%description
Linux Drivers for Sangoma AFT Series of cards and S Series of Cards. Wanpipe supports the following protocols, TDM Voice, Frame Relay, X25(API), PPP,Multi-link PPP, CHDLC and custom API development for WAN and Voice.
Install Wanpipe-util package for wanpipe utilities and configuration files.
%prep
%build
%install
%clean
%postun
echo "Uninstalling WANPIPE..."
%post
#check dependancies for the new modules
depmod -ae -F /boot/System.map-%{KVERSION} %{KVERSION}
echo "Wanpipe Modules located in %{MODULES_DIR}/%{KVERSION}"
%files
%{MODULES_DIR}
%{USR_INCLUDE_DIR}
%changelog
* Fri Aug 1 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.12
=====================================================================
- Compilation fix for 2.6.25 kernel
Introduced in 3.3.11 release
- Setup update
Added bri and zaptel installation modes.
-> ./Setup install #General installation
-> ./Setup zaptel #Zaptel based installation
-> ./Setup bri #SMG BRI installation
Streamlined Setup installation script
Added check for Asterisk directory when installing BRI
Added check for x86 in architecture
- Fixed Makefile build
- Updated README File
* Wed Jul 30 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.11
=====================================================================
- BRI to Analog Faxing Update
Improved faxing over SMG Gateway and Zaptel Analog.
This feature drastically improves faxing performance between
BRI and Analog cards over Asterisk.
- BRI Update
Added overlap dialing support
Added support for BRI with 16 channel Echo Canceler.
Support for test start option, that only verifies configuration
files without applying changes.
Support for non-syslog logging.
- BRI Bug Fix
BRI was configured for answer on accept. This caused a call to
be answered before the remote leg of the call became connected.
- T1/E1 Loopback Update
wanpipemon was update to check loopback status as well as set
T1/E1 loopback commands.
- Removed S508 ISA Support from drivers
- Fixed the BRI chip security handler. Tested that all BRI
ports get properly shut down.
- Updated for New PLX & Tundra PCIe Bridges chips
- Update hwprobe verbose for PMC Shark
- Updated for 2.6.25 kernel
- Fixed 64bit compilation for Octasic EC Image
- TDM API Bug Fix:
Added a check for buffer overflow in write function.
- New Octasic EC Image
Improves faxing over Hardware Echo Canceler.
- BRI Bug fix on startup
The clock measuring function has limited and could fail on some machines.
- AFT T1/E1 - Added missing LBO configuration option WAN_T1_0_110
- Updated for 2.6.25 kernel
- Updated wancfg for interface MTU/MRU
By default do not configure interface MTU/MRU if values have
not changed by default. This way the global mtu can be used
to easily configure the MTU/MRU of all interfaces.
- Updated wancfg_smg to configure XMTP2 API
- Wireshark Tracing for MTP2
http://wiki.sangoma.com/wanpipe-wireshark-pcap-pri-bri-wan-t1-e1-tracing
- T3/E3 Update
Driver level update to improve code.
- MTP2 API Support
http://wiki.sangoma.com/wanpipe-aft-ss7-mtp2-api
* Fri May 15 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.10
======================================================================
- BRI Update
Binary segfaulted on some systems due to gcc incompabilitly.
This is now fixed.
* Fri Apr 30 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.9
======================================================================
- AFT BRI Clock Reference Update
Disabled reference clocking feature on original A500 BRI Cards.
It has been determined that reference clocking feature is not always stable
on original A500 BRI cards. It can cause noise and call drops in some
circumstances where BRI lines go up and down due to power saving mode.
If you have problems with FAX synchronization on an original A500 BRI Card
contact Sangoma Support and we will swap out the card for one with
an updated CPLD that will work with the reference clock and provide
reliable FAXing.
Run wanrouter hwprobe verbose to determine your A500 BRI CPLD Version
-> wanrouter hwprobe verbose
-C00 -> old bri cpld (non reference clock)
-C01 -> new bri cpld (reference clock enabled)
- Manually Disabling BRI Clock Reference
This option is valid from 3.3.6 release and greater.
This option can be used in case of noise and voice quality issues
and call drop issues on BRI card.
In order to disable BRI clock reference manually one can add
RM_BRI_CLOCK=OSC in each BRI wanpipe config file in /etc/wanpipe directory.
1. vi /etc/wanpipe/wanpipe1.conf
2. Under the TDMV_SPAN option add
RM_BRI_CLOCK=OSC
3. Save file
4. Repeat for all BRI wanpipe configuration files
5. Restart all wanpipe devices
Note from 3.3.9 release on, all old CPLD A500 BRI cards
have clock referencing disabled automatically.
- Updated BRI Stack
Fix for RDNIS not cleared
Support for show_spans and show_calls.
Added support for multiple MSNs.
Added support for timer_t3 and timer_t302
http://wiki.sangoma.com/sangoma-wanpipe-smg-asterisk-bri-installation
* Fri Apr 25 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.8
======================================================================
- AFT Update
A bug was introduced in 3.3.7 release that failed to load
AFT cards without HWEC.
- AFT TE1 Code
Defaulted Maxim T1 Rx Level to 36DB
Defaulted Maxim E1 Rx Level to 42DB
This will improve T1/E1 connectivity on noisy or low power lines.
- AFT BRI Update
Minor update on BRI to conform better to TBR3 Certification
* Wed Apr 23 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.7
======================================================================
- BRI HWEC MAJOR Bug Fix
BRI hwec was not configured properly on startup.
Every second channel on each span was not being configured for hwec.
This would result in random echo problems.
- Support for 2.6.24 kernels and up
This release will now compile properly on 2.6.24 kernels and up.
- AFT Analog Update
Added TBR21 operation mode
Used for most european countries.
-> this option must be added manually in wanpipe#.conf
-> TDMV_OPERMODE=TBR21
- AFT A144 Update
Added MPAPI X25 support to AFT A144/A142 cards
Use: wancfg_legacy to configure MPAPI over AFT cards.
http://wiki.sangoma.com/wanpipe-linux-mpapi-x25
- BRI Updated
BRI driver updated for new 512hz clock used to improve
hardware echo canceler with clock recovery mechanism.
This featue will solve any random hwec warning messages
one might see in /var/log/messages. Note these random
warning messages did not cause any abnormal behaviour
in extensive lab testings.
To check your BRI hardware version run:
-> wanrouter hwprobe verbose
-C00 -> old bri cpld
-C01 -> new bri cpld
- Wanpipemon PRI/BRI PCAP Tracing for Wireshark
Using wanpipemon dchan trace one can now capture
pcap files that can be opened by Wireshark.
http://wiki.sangoma.com/wanpipe-wireshark-pcap-pri-bri-wan-t1-e1-tracing
- S514 Secondary port bug fix
The secondary port was not working.
- Updated wanrouter hwprobe
New wanrouter hwprobe device summary line will only contain
found devices. For backward compatibility we created "wanrouter hwprobe legacy"
that can be used to revert hwprobe output to the original format.
- Add pci parity check to wanrouter
wanrouter parity -> displays current system pci parity
wanrouter parity off -> disables system pci parity
wanrouter parity on -> enables system pci parity
/etc/wanpipe/wanrouter.rc
WAN_PCI_PARITY=OFF -> on wanrouter start disable pci parity
-> event logged in /var/log/wanrouter
On some servers pci parity can cause NMI interrupts that
can lead to reboots. Parity can be caused by unsuported
or buggy pci/bridge chipsets. The above commands can be used
to combat pci parity reboots.
Another option is to disable PCI parity in BIOS :)
* Wed Apr 4 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.6
======================================================================
- BRI Driver bug fixes
Secured the bri restart logic to prevent possible
race conditions.
- BRI Stack update
Bug Fix: bri stack update fixes reconnect on etsi lines
Feature: group outbound calls skip disconnected lines
- T3 update
Fixed dma issues on some machines when tx/rx mixed
voip and data traffic.
- Hardware Probe Verbose Update
Analog and BRI cards now display PCI/PCIe info on
wanrouter hwrobe verbose.
* Wed Mar 27 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.5
======================================================================
- Removed debugging out of firmware update utility
- Updated firmware bin files
- Updated firmware update script.
- No Functional Changes from 3.3.4
* Wed Mar 26 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.4
======================================================================
- BRI TE auto clocking feature - Bug fix
This feature failed on on some machines with multiple TE BRI modules.
This bug would cause modules to loose sync. Bug introduced in 3.3.3
release.
* Tue Mar 25 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.3
======================================================================
- BRI TE auto clocking feature.
Where a connected TE port is elected
as the telco clock recovery port for the whole card. If that TE
port goes down, another connected TE port is found to provide
telco recovery clock to the card. If no connected TE ports are found
then internal oscillator is used.
-> This option is fully automatic no configuration options needed.
- BRI Zaptel Clock Source
Since BRI does not interface to zaptel, it acts as ZT DUMMY to
provide zaptel reliable timing. One has to configure
TDMV_DUMMY_REF=YES in [wanpipe1] section of wanpipe1.conf
- A200/A400 Remora Relax CFG
If one module fails during operation the wanpipe driver by default
fails to load. With this option wanpipe driver
will allow the card to come up with a broken module so that
customer will be able to continue working until the module is replaced.
RM_RELAX_CFG=YES in [wanpipe1] section of wanpipe1.conf
* Fri Feb 14 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.2.1
======================================================================
- Added DTR API for Serial S514X Card
Ability to read and set the DTR/RTS on serial cards throught the API.
Sample code in wanpipe-3.3.2.1/api/chdlc/chdlc_modem_cmd.c
* Wed Feb 12 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.2
======================================================================
- Support for A500 hardware support with NetBricks BRI Stack
- Major A500 driver updates and fixes
- Serial A142/A144 hardware support
- AFT A056 56K hardware support
- Support for HW DTMF
- Updates for AFT PMC and MAXIM framers
PMC - lowered LOS sensitivity
Fixes fake up/down state changes on
started inactive lines.
MAXIM - lowered sensistivy
Fixes cable cross talk on 8 port cards.
- Enabled Unframed E1
- Enabled Tri-State Mode
- Fixed loopback commands
- Updated loopback commands for AFT Maxim cards
- Updated for AstLinux
The make file can now build all WAN and Voice Protocols
- Updated legacy protocols for new front end architecture
-
* Fri Feb 01 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.2.p8
======================================================================
- wancfg_zaptel now asks for the default_tei value for
- BRI cards in TE mode
- Fix for HWEC not being enabled when non-consecutive modules are using
- in BRI cards
* Fri Feb 01 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.2.p4
======================================================================
- Fixed AFT memory leak
Memory leak introduced in 3.3 release
- Fixed AFT 56K bug
Bug introduced in 3.3 releae
* Fri Feb 01 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.2.p3
======================================================================
- Fix bug in BRI protocol for fast local hangups.
* Mon Jan 18 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.2.p1
======================================================================
- Bug fix in Hardware EC code for E1.
Bug introduced in 3.3 release.
* Mon Jan 18 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.1
====================================================================
* Mon Jan 16 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.22
====================================================================
- BRI protocol:Increased internal timer that could cause issue in systems with
- more than 8 BRI spans
* Mon Jan 15 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.21
====================================================================
- BRI protocol:Fix for smg_brid daemon crashing on race condition
- BRI protocol:default_tei parameter is not ignored when using point to
- multipoint anymore
* Mon Jan 14 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.20
====================================================================
- BRI protocol: Additional prefix options.
- BRI protocol: Check is caller ID number is all digits on incoming calls
- Sangoma MGD: Removed dynamic user period causing skb panics
- chan_woomera: Fixed issue with rxgain and txgain values set to 0 if
- coding not set in woomera.conf
- wancfg_zaptel: Support for fractional T1/E1 spans.
- wancfg_zaptel: fix issue BRI always being configured as bri_net introduced in v3.3.0.19
* Mon Jan 07 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.19
====================================================================
- Support for national/international prefix in BRI stack
* Mon Jan 07 2008 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.18
====================================================================
- Changed Makefile in wanpipe/api/fr causing compilation errors
* Thu Dec 20 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.17
====================================================================
- Fix for smg_ctrl boot script starting before network services on some systems
- Support for language parameter in chan_woomera
* Thu Dec 20 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.16
====================================================================
- Fix for Sangoma BRI Daemon crashing on incoming call if chan_woomera is not installed on that system
* Tue Dec 18 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.15
====================================================================
- Fix for caller ID value being corrupted sometimes
- Support for call confirmation in chan_woomera
* Tue Dec 18 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.14
====================================================================
- Fix in smg_brid not releasing some b-channels properly
- Fix in wancfg_smg not setting MTU to 80 when configuring cards for SS7
* Fri Dec 14 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.13
====================================================================
- Fix for Kernel panic on 64-bit systems when enabling hardware echo canceller
* Thu Dec 5 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.11
====================================================================
- Support for AFT Serial Cards
- Updates for AFT PMC and MAXIM framers
PMC - lowered LOS sensitivity
Fixes fake up/down state changes on
started inactive lines.
MAXIM - lowered sensistivy
Fixes cable cross talk on 8 port cards.
- Enabled Unframed E1
- Enabled Tri-State Mode
- Fixed loopback commands
- Fixed HWEC_PERSIST_DISABLE
This option was broken in previous release
This option lets Asterisk control HWEC
on each call start/stop.
By default all hwec channels are enabled on
device startup.
- Updated SMG/SS7
- Updated loopback commands for AFT Maxim cards
- Updated for AstLinux
The make file can now build all WAN and Voice Protocols
- Fixed add_timer warnings for ALL AFT cards
Caused when a port is left in unconnected state.
- Updated legacy protocols for new front end architecture
- Updated Setup script
* Thu Nov 8 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.4
====================================================================
- Fixed A101/2 (Old) bug introduced in previous releaes
* Mon Oct 31 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.4
====================================================================
- Updated BRI caller name
- Updaged Setup
* Mon Oct 15 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.1
====================================================================
- Major Updates
- New BRI architecture/support
SMG with Netbricks BRI Stack
- Support for Hardware DTMF
* Thu Aug 22 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.p3
======================================================================
- Updated wancfg_zaptel to support HW DTMF
* Thu Aug 21 2007 Nenad Corbic <ncorbic@sangoma.com> - Beta - 3.3.0.p2
======================================================================
- Major Updates
- Hardware DTMF for Asterisk and TDM API
- - END -
Reference in New Issue View Git Blame Copy Permalink