43 lines
1.7 KiB
Bash
43 lines
1.7 KiB
Bash
#!/bin/bash
|
|
# router.rc WAN router meta-configuration file.
|
|
#
|
|
# This file defines variables used by the router shell scripts
|
|
# and should be located in /etc/wanpipe directory. These are:
|
|
#
|
|
# ROUTER_BOOT = Boot flag (YES/NO).
|
|
# WAN_CONF_DIR = Where to put wanpipe config files.
|
|
# WAN_INTR_DIR = Where to put wanpipe interface files.
|
|
# WAN_LOG = Where to put start-up log file.
|
|
# WAN_LOCK = File used as a lock.
|
|
# WAN_LOCK_DIR =
|
|
# WAN_IP_FORWARD = Enable IP Forwarding on startup.
|
|
# WAN_DEVICES = Name of the wanpipe devices to be
|
|
# loaded on 'wanrouter start'
|
|
# (ex: "wanpipe1 wanpipe2 wanpipe3...")
|
|
#
|
|
# Note: Name of wanpipe devices correspond
|
|
# to the configuration files in
|
|
# WANPIPE_CONF_DIR directory:
|
|
# (ex. /etc/wanpipe/wanpipe1.conf )
|
|
#
|
|
# Note: This file is 'executed' by the shell script, so
|
|
# the usual shell syntax must be observed.
|
|
ROUTER_BOOT=YES
|
|
WAN_CONF_DIR=/etc/wanpipe
|
|
WAN_INTR_DIR=/etc/wanpipe/interfaces
|
|
WAN_BIN_DIR=/usr/sbin
|
|
WAN_LOG=/var/log/wanrouter
|
|
WAN_LOCK=/var/lock/wanrouter
|
|
WAN_LOCK_DIR=/var/lock
|
|
WAN_IP_FORWARD=NO
|
|
NEW_IF_TYPE=NO
|
|
WAN_LIB_DIR=/etc/wanpipe/lib
|
|
WAN_ADSL_LIST=/etc/wanpipe/wan_adsl.list
|
|
WAN_ANNEXG_LOAD=NO
|
|
WAN_LIP_LOAD=YES
|
|
WAN_DYN_WANCONFIG=NO
|
|
WAN_SCRIPTS_DIR=/etc/wanpipe/scripts
|
|
WAN_FIRMWARE_DIR=/etc/wanpipe/firmware
|
|
WAN_DEVICES_REV_STOP_ORDER=YES
|
|
WAN_DEVICES="wanpipe1 "
|