79 lines
1.7 KiB
Plaintext
79 lines
1.7 KiB
Plaintext
Channelized WANPIPE TDMV Driver
|
|
===========================
|
|
|
|
ftp.sangoma.com/linux/current_wanpipe directory.
|
|
|
|
Release: wanpipe-beta7-2.3.3.tgz
|
|
|
|
Pleases read README.asterisk for detailed explanation of config options.
|
|
|
|
|
|
To install it follow the recipe below:
|
|
|
|
1) ./Setup install
|
|
|
|
Custom compile:
|
|
choose TDM (DEF will be set by default)
|
|
|
|
If you want DCHAN option select yes for it.
|
|
This will enable Hardware HDLC for DCHAN PRI.
|
|
|
|
This option will also PATCH Zaptel driver.
|
|
Thus, Zaptel driver MUST be recompiled after
|
|
./Setup is finished.
|
|
|
|
2) Once wanpipe is installed go ahead and recompile
|
|
zaptel and install it.
|
|
cd ..zaptel/
|
|
make clean
|
|
make
|
|
make install
|
|
|
|
3) Then make sure wanpipe is unloaded:
|
|
lsmod | grep wanpipe
|
|
|
|
|
|
4) The new TDMV Channelized Driver works for both
|
|
A104 and A102 Cards.
|
|
|
|
The new TDMV A104 drivers will fail to load if
|
|
firmware version is less then V.11.
|
|
|
|
How to check your AFT Firmware Version:
|
|
1) wanrouter hwprobe
|
|
2) grep "HDLC.*rev" /var/log/messages
|
|
Note the (HDLC rev.11) message for each card.
|
|
|
|
If you card has old firmware, proceed to upgrade to
|
|
new AFT 104 firmware:
|
|
|
|
cd wanpipe/utils/wan_aftup
|
|
|
|
Make sure wanpipe modules are NOT loaded
|
|
wanrouter modules
|
|
wanrouter stop
|
|
|
|
|
|
Run ./update_aft_firm.sh
|
|
Specify interface name for A104 card
|
|
Select version 10
|
|
Select Y to restart FLASH firmware.
|
|
(This will not reboot your computer!)
|
|
|
|
5) Create config file:
|
|
|
|
wancfg -> Protocol: TDMV Protocol
|
|
-> Interface:
|
|
Specify SPAN number
|
|
Specify DCHAN PRI Timeslot
|
|
|
|
Please read README.asterisk for more info.
|
|
|
|
Save and Exit
|
|
|
|
|
|
|
|
|
|
|
|
|