#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Tue Mar 16 11:37:06 EST 2004
#
# Note: This file was generated automatically
#       by /usr/sbin/wancfg program.
#
#       If you want to edit this file, it is
#       recommended that you use wancfg program
#       to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe1 = WAN_BITSTRM, Comment

[interfaces]
wp1bstrm1 = wanpipe1, , API, Comment

[wanpipe1]
CARD_TYPE 	= S51X
S514CPU 	= A
AUTO_PCISLOT	= NO
PCISLOT 	= 2
PCIBUS		= 2
MEDIA 		= T1
LCODE 		= B8ZS
FRAME 		= ESF
TE_CLOCK 	= MASTER
ACTIVE_CH	= ALL
LBO 		= 0DB
Firmware	= /etc/wanpipe/firmware/bitstrm.sfm
CommPort	= PRI
Interface 	= V35
Clocking 	= External
BaudRate 	= 1540000
MTU 		= 1500
UDPPORT 	= 9000

sync_options 		 = 0x0010
rx_sync_char 		 = 0x00
monosync_tx_time_fill_char = 0x00
max_length_tx_data_block = 1200	#For voice set to 480
rx_complete_length 	 = 1200 #For voice set to 480
rx_complete_timer 	 = 1500
rbs_ch_map		 = 0   #Enable rob bit signalling
                               #on T1 time slots
			       #0=Disabled
			       #1-24 or ALL = Enabled

TTL 		= 255
IGNORE_FRONT_END  = NO

[wp1bstrm1]
ACTIVE_CH	= 24
HDLC_STREAMING	= NO
SEVEN_BIT_HDLC	= NO
MAX_TX_QUEUE	= 10		
MAX_TX_UP_SIZE  = 1000	#For voice set to 200