%define WANPIPE_VER wanpipe-modules %define name %{WANPIPE_VER} %define version 3.5.21 %define release 0 %define serial 1 %define MODULES_DIR /lib/modules %define USR_INCLUDE_DIR /usr/include %define KVERSION %{?kern_ver} Summary: Sangoma WANPIPE package for Linux. It contains the WANPIPE kernel drivers. Please install wanpipe-util package for wanpipe utilties and configuration files. Name: %{name}-%{?kern_ver} Version: %{version} Release: %{release} License: GPL Group: Applications/Communications Vendor: Sangoma Technologies Inc. Url: www.sangoma.com Group: Networking/WAN %description Linux Drivers for Sangoma AFT Series of cards and S Series of Cards. Wanpipe supports the following protocols, TDM Voice, Frame Relay, X25(API), PPP,Multi-link PPP, CHDLC and custom API development for WAN and Voice. Install Wanpipe-util package for wanpipe utilities and configuration files. %prep %build %install %clean %postun echo "Uninstalling WANPIPE..." %post #check dependancies for the new modules depmod -ae -F /boot/System.map-%{KVERSION} %{KVERSION} echo "Wanpipe Modules located in %{MODULES_DIR}/%{KVERSION}" %files %{MODULES_DIR} %{USR_INCLUDE_DIR} %changelog * Wed Aug 23 2011 Nenad Corbic - 3.5.21 ================================================================== - T1 AMI fix - Fixed for 2.6.39 and 3.0.1 kernels - Fixed for dahdi 2.5 - Fixed BRI wancfg_dahdi config - Added HW Echo Cancellation Clock failover. If EC is using clock from port 1 and that port goes down. The clock source will be taken from another connected port. - Minor bug fix in hdlc test sample app - Bug fix libsangoma: multilple wait object issue - BRI for DAHDI - B601 receives timing from analog port when T1 is down. - Libsangoma ss7 hw config status - Edge cases bug fixes on multi port restart - Updated v44 for A104 firmware - Analog 64bit 8GIG memory issue dma sync fix - Support for ss7 firmware V44 on A104 only. - Fixed logger - caused slow prints on some kernels due to use of vprintk - Added Global Poll IRQ mode for efficient high density hdlc tx/rx - wanpipemon added led blink option to idetnify port Removed the led on/off wanpipemon -i w1g1 -c dled_blink -timeout 10 #with timeout wanpipemon -i w1g1 -c dled_blink #without timeout - wanpipemon documented performance statatistics wanpipemon -p aft - wanpipemon added led ctrl Used to visually identify a port from software wanpipemon -p aft for documentation Added this feature in libsangoma as well. - Minor updates in wanpipe spec file - Bug fixes in wancfg legacy - aftpipemon fixed for 24port analog - B601 mtu fix for FreeSWITCH Causes audio issues - Added performance stats - Fixed B601 for TDMAPI & FreeSWITCH Dchannel - Confirmed that B601 works for Asterisk (dahdi hdlc mode) - Fixed rescan feature - Libsangoma builds by default now wanec utilities now depend on libsangoma - Libsangoma contains the full wanec api - Libsangoma wanec API for TDM API - Added libsangoma hwec functions for Linux - Hwec audio_mem_load added to the api. * Mon Apr 11 2011 Nenad Corbic - 3.5.20 ================================================================== - Fixed customer id read - Added hwrescan libsangoma command - Updated the analog ring debouncing threshold so that ring is properly debounced - Fixed AIS alarm clear flag bug The AIS alarm flag was not being cleared in the driver. - New Octasic Image 1.6.2 Fix for AGC (Automatic Gain Control) AGC now meets Microsoft Audio Quality Spec - Fixed start script for ubuntu * Fri Mar 1 2011 Nenad Corbic - 3.5.19 ================================================================== - Fixed scripts for Ubuntu - TDM API updated Tone Event API to include tone type DTMF, FAX_1100, FAX_2100, FAX_2100_WSPR - Fixes for latest 2.6.36 linux kernel - Fixes for TTY Driver for 2.6.32 linux kernel - BRI default idle set to 0xFF so it does not interfere with multi-port mode. - BRI NT & TE activation/deactivation logic update. - Dahdi Yellow alarm reporting fix Wanpipe driver did not report yellow alarms properly to dahdi - T1 Automatic AIS on LOS option now optional Previoulsy the T1 code enabled automatic AIS on LOS by default. This is now an option TE_AIS_AUTO_ON_LOS=YES|NO Default behaviour is to send Yellow alarm on link down. - Fixed a TE1 startup race condition bug. It was possible for T1/E1 interrupt to occour before configuration was completel - Fixed wanpipe.spec for dahdi RPM build - Added serial clock recovery feature * Fri Nov 22 2010 Nenad Corbic - 3.5.18 ================================================================== - BRI Multi-Point fix idle 0xFF - BRI fix for XEN virtualization - Fixed front end interrupt issue - wancfg_fs (fix the little bugs) - update to support the latest dahdi-linux - fix dahdi_scan, now reporting the right values instead of showing blank - new echo canceler image - fix for the echo canceler for A500 for freetdm mode. HWEC will turn on when there is a call on the bri line. - Added SW HDLC into the core. B - B601 is now supported on FreeTDM/FreeSWITCH and TMDAPI - Added wan_fxotune utility to utils directory Used to tune fxo cards under TDM API or FreeSWITCH mode. * Fri Oct 08 2010 Nenad Corbic - 3.5.17 =================================================================== - Critical Bug fix in WAN mode. Bug introduced in 3.5.16 * Fri Sep 27 2010 Nenad Corbic - 3.5.16 =================================================================== - Dahdi 2.4 Support - Fixed BRI B500/B700 hwec enable on call start caused in 3.5.12 release. - Bug fix in voice+data mixed mode where dchan could get stuck due to dma overruns. - Bug fix in tdmapi where excessive memory was allocated on pre-allocation buffers. - Bug fix tdmapi defaults to 20ms chunk size instead of 10ms - Bug fix broken support for A101/2 legacy EOL cards. - New XEN Support TDM Voice will now work properly on xen virtualized machines - Fix for 64bit 8gig issues - New rpmbuld spec files. rpmbuild -tb wanpipe-3.5.16.tgz rpmbuild -tb wanpipe-3.5.16.tgz --define 'with_dahdi 1' --define 'dahdi_dir /usr/src/dahdi' * Fri Aug 27 2010 Nenad Corbic - 3.5.15 =================================================================== - Fixed B600 and B601 warning messages introduced in 3.5.14 - New Firmware for A108&A104 V43 Fixes PCI parity errors on new dell,ibm boxes - Libsangoma added rw fe reg, and rx/tx gains - Build script does not polute the linux source any more. - Bug fix in B800 detect code - Fixed wanfcg_fs for freeswitch - * Tue Jun 29 2010 Nenad Corbic - 3.5.14 =================================================================== - Fixes stop script for Asterisk 1.6.2 - Compile fix in legacy api sample code - Skipped .13 releaes went straight to 14 :) * Mon Jun 28 2010 Nenad Corbic - 3.5.12 =================================================================== - Fixed Dahdi 2.3 Support - Fixed FreeSwitch Openzap HardHDLC option for AFT cards - Fixed wanpipemon support for non aft cards. - Merged USB FXO code from 3.6 release - USB FXO bug fix for 2.6.32 kernels - Support for B800 Analog card - Fixed alarm reporting in DAHDI/ZAPTEL - Added Extra EC DSP Configuration Options HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo cancelation enabled with nlp (default) # OCT_SPEECH: improves software tone detection by disabling NLP (echo possible) # OCT_NO_ECHO:disables echo cancelation but allows VQE/tone functions. HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out of incoming media (must have hwdtmf enabled) HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on the line - could break fax HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables acustic echo cancelation HWEC_NLP_DISABLE = NO # NO: default YES: guarantees software tone detection (possible echo) HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default) HWEC_RX_AUTO_GAIN = 0 # 0: disable -40-0: default rx audio level to be maintained (-20 default) HWEC_TX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal HWEC_RX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal - Added AIS BLUE Alarm Maintenance Startup option Allows a port to be started in BLUE alarm. TE_AIS_MAINTENANCE = NO #NO: defualt YES: Start port in AIS Blue Alarm and keep line down #wanpipemon -i w1g1 -c Ttx_ais_off to disable AIS maintenance mode #wanpipemon -i w1g1 -c Ttx_ais_on to enable AIS maintenance mode - Fixed Legacy XDLC compile - Fixed core edge case scenarios where potential race condition could occour. * Thu Apr 08 2010 Nenad Corbic - 3.5.11 =================================================================== - Fix for 2.6.31 and higher kernels - TDM API Analog rx gain feature - Disabled default NOISE REDUCTION feature in hwec that was enabled in 3.5.9 release. - Updates to T1/E1 Loopback and BERT Test * Wed Jan 11 2010 Nenad Corbic - 3.5.10 =================================================================== - Release cleanup script earsed libsangoma.c during release packaging. I have update release procedure so this does not happen again. This release has no functionl differences aside from the missing file from 3.5.9 release. * Wed Dec 30 2009 Nenad Corbic - 3.5.9 =================================================================== - New logger dev feature - Bug fix in tx fifo handler - Dahdi 2.2 broke wanpipe rbs support. - Fixed free run interrupt supported on V38 (A108) - Fixed RBS signalling for E1 channel 31 - Added Front end Reset Detection -> Support for new A108 Firmware V40 - Fixed RTP TAP bug: Caused high system load on RTP TAP usage. - Added excessive fifo error sanity check. Fixes random pci dma errors. - HWEC: Increased EC VQE Delay: Fixes random fax failure due to hwec. - HWEC: Check state before bypass enable. - HWEC: Disable bypass on release - HWEC: Enabled Noise Reduction by default - HWEC: Enabled Auto Gain Control by default - HWEC: To disable Noise Reduction and Gain control set -> HWEC_NOISE_REDUCTION_DISABLE=NO in [wanpipe] section of wanpipe1.conf To check if Noise Reduction or Gain control are set -> wan_ec_client wanpipe1 stats 1 * Thu Oct 02 2009 Nenad Corbic - 3.5.8 =================================================================== - Bug fix in sangoma_prid PRI stack for FreeSwitch & Asterisk. There was a slow memory leak. * Thu Sep 04 2009 Nenad Corbic - 3.5.7 =================================================================== - New Telesoft PRI Stack Support for FreeSwitch & Asterisk For Asterisk: The new stack uses the existing Sangoma Media Gateway architecture currently used by SS7 and BRI. -> run: wancfg_dahdi or wancfg_zaptel to configure for sangoma prid stack. For FreeSwitch: The new stack binds to openzap directly just like current SS7 and BRI. -> run: wancfg_fs to configure freeswitch for sangoma prid, brid, ss7. - Fixed Tx Tristate - Updated yellow alarm handling for Dallas maxim cards (A101/2/4/8) - Autodetect USB support so that driver will compile correctly on kernel without USB support - Added DAHDI Red alarm for Analog * Thu Aug 20 2009 Nenad Corbic - 3.5.6 =================================================================== - Update to T1 Yellow Alarm handling. In some cases Yellow alarm did not turn off poperly causing line to stay down an card startup. - Update configuration utility wancfg_fs updated for sangoma_prid configuration. Added wancfg_openzap for OpenZap Configuration * Mon Aug 17 2009 Nenad Corbic - 3.5.5 =================================================================== - Dahdi 2.2 Support - BRI Update - Added T1 timer for NT module - AFT Core Update - optimized dma ring buffer usage - TDM API - refractoring and optimization - Updated for 2.6.30 kernel - New firmawre feature for A101/2/5/8: Free Run Timer Interrupt The AFT T1/E1 cards will now provide perfect timing to zatpel/dahdi even when the ports are not connected. The free run interrupt will be enabled when all zaptel/dahdi ports are down, or on inital card start. To test this feature just start a wanpipe port with zaptel/dahdi and run zttest. A108 firmare V38 A104/2/1/ firmware V36 - AFT T1/E1 front end update Added OOF alarm treshold, so that line does not go down on very first OOF alarm. - Added module inc cound when zaptel/dahdi starts. So wanpipe drivers do not crash if one tries to unload zaptel/dahdi before stopping wanpipe drivers. * Thu Jul 07 2009 Nenad Corbic - 3.5.4.8 =================================================================== - Updated for B700 Dchan Critical Timeout - Fix for FAX detect on PRI - Updated for 2.6.21 kernel TASK QUEUE REMOVAL caused unexpected behaviour. - Updated wancfg_zaptel for fax detect * Thu Jul 03 2009 Nenad Corbic - 3.5.4.3 =================================================================== - Added DAHDI 2.2 Support * Thu Jul 02 2009 Nenad Corbic - 3.5.4.2 =================================================================== - AFT 64bit update No need for --64bit_4G flag any more. The 64bit check is now down in the driver. - TDM API Updated the Global TDM Device This device can be used to read events an all cards configured in TDM API mode. - Libsangoma verion 3.1.0 Added a function to check if hwec is supported * Tue Jun 30 2009 Nenad Corbic - 3.5.4.1 =================================================================== - Sangoma MGD update v.1.48 Disable hwec on data calls * Mon Jun 29 2009 Nenad Corbic - 3.5.4 =================================================================== - E1 Voice Bug fix introduced in 3.5.3 - Removed NOISE REDUCTION enabled by default. The noise reduction is disabled by default and should be enabled using HWEC_NOISE_REDUCTION = YES - Fixed libsangoma enable dtmf events functionality * Tue Jun 25 2009 Nenad Corbic - 3.5.3 =================================================================== - New Makefile build system Note this does not replace Setup. Makefile build system can be used by power users. Asterisk make dahdi DAHDI_DIR= make install make zaptel ZAPDIR= make install FreeSwitch make openzap make install TDM API make all_src make install - Updated libsangoma API Redesigned wait object for Linux/Windows integration. - Turned on HWEC Noise Reduction by default To disable noise reduction specify HWEC_NOISE_REDUCTION_DISABLE=YES in [wanpipe1] section of wanpipe config file. - Regression tested for FreeSwitch+OpenZAP - Updated dma buffers in ZAPTEL and TDM API mode. - Bug fixes for Mixed Data + Voice Mode - Bug fix on TDM API mode. Flush buffers could interfere with tx/rx data. - Added BRI DCHAN monitor in case task is not scheduled by the system. Sanity check. - Fixed libsangoma stack overflow check that failed on some kernels. * Fri May 08 2009 Nenad Corbic - 3.5.2 =================================================================== - B700 PCIe cards were being displayed as PCI cards in hwprobe - Bug fix in wancfg_zaptel * Thu May 07 2009 Nenad Corbic - 3.5.1 =================================================================== - New Hardware Support B700 - Mixed BRI & Analog B600 - Analog 4FXO/FXS USB-FXO - USB Fxo device - New Unified API for Linux & Windows API Library - libsangoma Unified Voice API for Linux & Windows -More Info http://wiki.sangoma.com/wanpipe-api - SPAN mode API - CHAN mode API - Unified driver for Linux & Windows - Updated BRI Stack and Support - New BRI A500 & B700 firmware that fixes PCI parity errors. On some systems A500 & B700 cards can generate parity errors. - FreeSwitch Tested - Update for 2.6.26 kernel Note this is a major release. It has been fully regression tested and stress tested in the lab and in the field. - - END -