#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec  6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
#       by /usr/local/sbin/setup-sangoma program.
#
#       If you want to edit this file, it is
#       recommended that you use wancfg program
#       to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE_API, Comment

[wanpipe1]
CARD_TYPE 	= AFT
S514CPU 	= A
CommPort 	= PRI
AUTO_PCISLOT 	= YES
PCISLOT = 1
PCIBUS = 3
FE_MEDIA	= E1
FE_LCODE	= HDB3
FE_FRAME	= CRC4
FE_LINE		= 2
TE_CLOCK 	= NORMAL
TE_REF_CLOCK 	= 0
TE_HIGHIMPEDANCE	= NO
LBO 		= 120OH
FE_TXTRISTATE	= NO
MTU 		= 1500
UDPPORT 	= 9000
TTL		= 255
IGNORE_FRONT_END = NO
TDMV_SPAN	= 1
TDMV_DCHAN	= 16

RTP_TAP_IP=192.168.1.1		#Remote IP Address on local network
RTP_TAP_PORT=9000		#Remote UDP Port 
RTP_TAP_MAC=00:04:23:B0:24:CE	#Remote MAC Address on local network

RTP_TAP_SAMPLE=100		#RTP sample in millisec. (Default: 100ms)
				#100ms = 800bytes = 100 * 8 byte/ms (ulaw/alaw) 

RTP_TAP_DEV=eth0		#Ethernet device on your local machine 
				#that is connected to the local network


[w1g1]
ACTIVE_CH	= ALL
TDMV_ECHO_OFF	= NO
TDMV_HWEC = NO