WANPIPE OFFICIAL RELEASE CHANGE LOG
===================================


Author: Nenad Corbic <ncorbic@sangoma.com>


Wanpipe Linux Web Page:
-------------------
For latest docs please visit Sangoma Wiki
Sangoma Wiki: http://wiki.sangoma.com 


MAJOR CHANGES
-------------

	o The 2.3.4 release contains:
	
	  AFT A108 & A108D Drivers.
	  Updated TDMV Channelized Driver for Asterisk
	  with support for hardware echo cancellation.

	  TDM API Drivers.
	  Used to create custom TDM applications over
	  sangoma AFT devices.

	  Sangoma Signal Media Gateway: 
	  SS7 Support for Asterisk
	  
	  LIP Protocol Layer: 
          New protocols: ATM (AAL5), Frame Relay EEK


	o The 2.3.3 release contains:

	  AFT A104 TDMV Channelized Driver for Asterisk
	  The A104 TDMV Driver uses the channelization feature
	  of the A104 Card, to DMA 8byte chunks directly
	  into Zaptel buffers.  

	  AFT A104 TDMV DCHAN Feature
	  The DCHAN PRI has hardware HDLC support.

	o The 2.3.2 release contains:
          
	  Stable TDMV Wanpipe drivers for Asterisk.   
          The TDMV drivers support both A102 and A104 cars.
	  Please read wanpipe/doc/README.asterisk

          Stable TE3 Drivers for AFT A301 TE3 Unchannelized Card. 
          All WAN protocols are supported: Frame Relay, PPP, CHDLC..

	  Stable LIP Network Layer:  Separates Wanpipe hardware from
	  the Network Protocols: Frame Relay, CHDLC, 
                                 PPP, LAPB API, XDLC  API

	o The 2.3.1 contains major structural driver changes.
	  The new Hardware Abstraction layer cleanly separates, the
	  physical layer from the driver/protocol layers.

	  Support for 2.6.X kernel.

	o The 2.3.0 contains major structural driver changes 
	  most notably the ADSL OS abstraction layer. ADLS drivers
	  can now be compiled against any custom kernel.

	o From 2.2.6 release forward the new S514-7 Dual T/E1, 
 	  S514-8 Single TE1 and S518 ADSL cards are supproted.

	o From 2.2.4 release forward the new S514-4 T/E1 and S514-5 56K
          cards are supported.
   
	o From 2.2.3 release forward ALL wanpipe modules
          including API modules, can be recompiled from
           ./Setup installation script! 
           NO KERNEL RE-COMPILATION is necessary.
           
	o From 2.2.3 release forward, wanpipe directory
           architecture has been changed.  New home directory
           for wanpipe is /etc/wanpipe. 
   
	o All old releases are in ../old_releases/wanpipe directory. 

	o Custom RPMs can be build based on current kernel image
	  by using the ./Setup buildrpm command.
	  Read the README.rpmbuild.