#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Jul 21 17:45:31 EDT 2004
#
# Note: This file was generated automatically
#       by /usr/sbin/wancfg program.
#
#       If you want to edit this file, it is
#       recommended that you use wancfg program
#       to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe1 = WAN_AFT, Comment

[interfaces]
wp1aft = wanpipe1, auto, WANPIPE, Comment

[wanpipe1]
CARD_TYPE 	= AFT
S514CPU 	= B
AUTO_PCISLOT	= NO
PCISLOT 	= 1
PCIBUS		= 2
MEDIA 		= T1
LCODE 		= B8ZS
FRAME 		= ESF
TE_CLOCK 	= NORMAL
ACTIVE_CH	= ALL
LBO 		= 0DB
Firmware	= /etc/wanpipe/firmware/cdual514.sfm
Interface 	= V35
Clocking 	= External
BaudRate 	= 1540000
MTU 		= 1500
UDPPORT 	= 9000
TTL 		= 255
IGNORE_FRONT_END  = NO

[wp1aft]
ACTIVE_CH	= ALL		#Bind to all T1/E1 channels

PROTOCOL	= MP_CHDLC	#Specify WAN Protocol
				#MP_FR: Frame Relay
				#MP_CHDLC
				#MP_PPP
#Frame Relay Only
#STATION	= CPE		
#SIGNALLING	= ANSI

IGNORE_DCD	= NO
IGNORE_CTS	= NO
HDLC_STREAMING	= YES		#Enable HDLC Engine
DYN_INTR_CFG	= NO