WANPIPE XDLC API
================


Author: Nenad Corbic <ncorbic@sangoma.com>



Pre requisites
--------------

1. A Linux kernel source must be available.
   Usually in /usr/src/linux directory.
   
   Furthermore, the linux source version must
   match the currently running image.

   i.e. Output of 'uname -r'
        must match the source version
	number in /usr/src/linux/Makefile.

   Note: The Setup installation script checks
         for this condition and will take
	 appropriate steps to resolve the
	 name mismatch.




Installing WANPIPE with XDLC API
--------------------------------

The XDLC API support is installed by default
during WANPIPE installation process.

Use the CUSTOM driver compilation 
option in 
    ./Setup install

After successful installation proceed to 
configure you XDLC card using /usr/sbin/wancfg 
GUI configurator.


Installation Verification
-------------------------

Run wanpipe hardware probe to
make sure that the kernel modules
are working fine:

Run:	wanrouter hwprobe


	In case of error:
	-----------------

	Please contact Sangoma Tech Support
	Tel. 	905 474 1990 ex118 
	Email:  techdesk@sangoma.com



Configuring XDLC API
------------------------

NOTE: WANCFG DOESN'T CURRENTLY SUPPORT XDLC

Please use sample config file



Start XDLC protocol
---------------------------------- 

Run: wanrouter start


	In case of errors:
	------------------
	Run: 	wanrouter messages
       	
		It will display kernel error
		messages.

	Please contact Sangoma Tech Support
	Tel. 	905 474 1990 ex118 
	Email:  techdesk@sangoma.com


Startup Confirmation
--------------------

Run: wanrouter messages

	Make sure no error messages are displayed.

 	Confirm the state of Front End (T1/E1/V35)
	Confirm the Link state

	Check for any error events.


Custom API Application
======================

A sample API application exists in
/etc/wanpipe/api/xdlc directory.

Please read the README file in /etc/wanpipe/api/xdlc 
directory.