Harald Welte
0f58fbe677
migrate to osmo-e1-hardware.git
...
Change-Id: I910fe21c42a169e198cdd9340032920f0628a583
2020-09-04 15:43:12 +02:00
Harald Welte
71768e51c8
Change name of repository in README
...
Change-Id: I8a4cfb55386ea7eb1dbf90587a2ceb7995dc363f
2020-09-04 15:13:55 +02:00
Harald Welte
2aa6d028a8
software/obsloete: Add sockbuf_test.c from my local tree
2020-09-04 14:57:52 +02:00
Harald Welte
a5c8ba48b8
delete sam4s related files as this approach was discontinued
2020-09-04 14:57:10 +02:00
Harald Welte
6719ac2019
move old software snippets and hacks to software/obsolete
2020-09-04 14:56:45 +02:00
Harald Welte
cf3eec249b
e1-xcvr: Add missing gerber output (was uncommitted in my tree)
2020-09-04 14:54:34 +02:00
Harald Welte
0df93a33fe
big hardware directory re-organization in preparation of ice40 merge
2020-09-04 14:54:34 +02:00
Martin Schramm
55d9d07d27
e1-tracer: repair Excellon drill file (and its desc)
2020-08-30 19:14:59 +02:00
Harald Welte
6d4f68d3d0
export e1-tracer eBOM also as csv
2020-08-30 17:48:10 +02:00
Harald Welte
802f095e47
export e1-tracer gerber files
2020-08-30 17:47:04 +02:00
Harald Welte
c652b7cd7c
README: update to reflect we have 3 separate hardware designs here
2020-08-30 17:45:09 +02:00
Harald Welte
1a459b0cbf
e1-tracer: Add PDF renderings of schematics and board
2020-08-30 17:38:48 +02:00
Martin Schramm
471653546e
e1-tracer: denote CC-BY-SA 4.0 in schema (adds to SYS#5052)
2020-08-30 17:12:29 +02:00
Joachim Steiger
3c40deac2d
add flash scripts to flash e1_tracer via https://github.com/dword1511/stm32-vserprog.git and dfu-util
2020-08-27 00:45:20 +02:00
Martin Schramm
8858e127a2
e1-tracer: more eBOM atrributes + commit eBOM
2020-08-15 19:04:39 +02:00
Martin Schramm
49188b5867
e1-tracer: collect more BOM atrributes
2020-08-15 18:11:34 +02:00
Harald Welte
fd79cfa8a3
e1-tracer: Add various BOM attributes
2020-08-15 15:19:35 +02:00
Martin Schramm
ea80688044
e1-tracer: further shrink the GND and 3V3 copper inwards left and right
...
... and run a local DRC
2020-08-14 19:10:02 +02:00
Martin Schramm
c56283aeee
e1-tracer: update again from ice40 lib
...
Another pin was found with 'wrong' direction state. Severity of this
is low as is shows only warnings in ERC, removing it anyways during
verification.
2020-08-14 13:38:33 +02:00
Martin Schramm
0e973a2f1e
e1-tracer: update from ICE40 lib after minor Eagle pin dir change
2020-08-14 13:23:53 +02:00
Martin Schramm
c21ca237df
e1-tracer: start a last renumber (after inserting 4x 0R)
2020-08-14 12:41:57 +02:00
Martin Schramm
a0c864cc30
e1-tracer: annotate jumper JP1 signals in silk screen
2020-08-14 12:23:22 +02:00
Martin Schramm
cad013f3c4
e1-tracer: minor silk screen cosmetics
2020-08-14 12:14:47 +02:00
Martin Schramm
c630d167be
e1-tracer: 4x 0R on R and B LED color selection wires
2020-08-14 12:07:08 +02:00
Martin Schramm
84d93f2518
Merge branch 'master' of ssh://git.osmocom.org/osmo-e1-xcvr
2020-08-14 11:10:27 +02:00
Martin Schramm
51efbb261a
e1-tracer: have more clearance of VBUS trace on PCB edge
2020-08-14 11:09:39 +02:00
Harald Welte
95478a23ef
Makefile: libraries should be in LIBS, not LDFLAGS
2020-08-14 00:07:19 +02:00
Martin Schramm
32a4aa0faf
e1-tracer: add a generic 0603 blue LED type w/ Vf=2.8V
...
designating LTST-C193TBKT-5A for now
2020-08-12 17:25:12 +02:00
Martin Schramm
488520323b
e1-tracer: improve power bypassing on LIU's VDDT and VDDA
...
...by placing 2x 22u per LIU (instead of 68u DNP), shrinking packages
from 1206 to 0805
2020-08-12 17:12:51 +02:00
Martin Schramm
d6c12735b1
e1-tracer: add 2x 33R series resistors in USB wires
...
and
* update improved HC73 package
* move upper third of PCB (LIUs and XOs) left
2020-08-12 16:07:06 +02:00
Martin Schramm
a5fd600135
e1-tracer: reapir missing VDD_3V3 on serial debug out's TVS
2020-08-11 23:36:55 +02:00
Martin Schramm
1460628d81
e1-tracer: 'update' our generic rc lib again to purge '..@1' packages
2020-08-11 22:00:52 +02:00
Martin Schramm
f75f35966a
e1-tracer: finish PCB
2020-08-11 14:35:05 +02:00
Martin Schramm
e4d7fbbe84
e1-tracer: state copyright in sch and brd
2020-08-06 16:24:00 +02:00
Martin Schramm
8c9a55db6e
e1-tracer: PCB almost ready
...
... with some room for improvement: LEDs might go to the right of the
2x RJ45
2020-08-06 16:10:16 +02:00
Martin Schramm
ff394bdbb0
e1-tracer: commit a first schematic
2020-07-27 13:44:20 +02:00
Harald Welte
190cd58ca7
increase clearance of ground planes; pad roundness
2019-12-20 23:55:34 +01:00
Harald Welte
c5a57a2ab5
enlarge board to have proper mounting holes for mechanical mounting
2019-12-20 23:43:50 +01:00
Harald Welte
dfe01d45f4
squash most parts and avoid silk screen overlaps all over the place
2019-12-20 23:35:19 +01:00
Harald Welte
2a8c4c5f33
change font to vector / update to v2
2019-12-20 23:14:49 +01:00
Martin Schramm
15e6f9a81b
e1_xcvr.brd: minor routing improvement on TRING signal
2018-05-29 20:05:48 +02:00
Martin Schramm
00ebf25701
replace old PULSE_T1094NL footprint, repair pin assignment (solves OSM#3269)
2018-05-29 19:52:28 +02:00
Martin Schramm
8ce574846d
laforge.lbr: PULSE_T1094NL: better tPlace and tDocu layer (for OSM#3270)
2018-05-29 19:21:38 +02:00
Martin Schramm
69f96a69ad
connect LIU's pin 44 to GND (solves OSM#3247)
2018-05-29 13:38:51 +02:00
Martin Schramm
ed2b563216
laforge.lbr: repair PULSE_T1094NL footprint and symbol (solves OSM#3270)
...
... and OSM#3271. - The transformer symbol is made of two identical coils
and hence it is not possible to mark the "2:" side (pins 9-11) separately.
But the naming of this coil was changed in a way, that, when invoked, the
"2" of the subpart name "TR1-1:2" shows towards the pins 9-11.
Maybe we should evolve to a device symbol with two coils merged rather than
two identical but separated, then an individual naming could honour the
2:1 side and can not be disturbed by e.g. subsequent mirroring. -
Also repaired the name and value designators' layer association.
2018-05-18 21:26:33 +02:00
Harald Welte
e00749c767
sam4s-e1.gnumeric: Avoid EXT4, add wire colors
2018-05-16 21:14:17 +02:00
Sylvain Munaut
d373558370
src: Add .gitignore for the software
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2018-05-16 20:23:56 +02:00
Sylvain Munaut
2c3c2757a5
osmo_e1f: Fix Makefile to use pkg-config
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2018-05-16 20:22:44 +02:00
Harald Welte
a3ddfb1eff
Merge branch 'laforge/software'
2018-05-16 20:15:09 +02:00
Harald Welte
24531cebef
rename osmo_e1 to osmo_e1f ("f" for "framer")
2018-05-16 20:13:38 +02:00