2177 lines
60 KiB
C
2177 lines
60 KiB
C
/* $Id$
|
|
*
|
|
* mISDN driver for Colognechip HFC-S USB chip
|
|
*
|
|
* Author : Martin Bachem (info@colognechip.com)
|
|
* - based on the HiSax hfcusb.c driver by Peter Sprenger
|
|
* - based on a mISDN skel driver by Karten Keil
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* TODO
|
|
* - E channel features
|
|
*
|
|
*/
|
|
|
|
// #include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/usb.h>
|
|
#include "channel.h"
|
|
#include "layer1.h"
|
|
#include "debug.h"
|
|
#include "hfcs_usb.h"
|
|
|
|
|
|
#define DRIVER_NAME "mISDN_hfcsusb"
|
|
const char *hfcsusb_rev = "$Revision$";
|
|
|
|
#define MAX_CARDS 8
|
|
static int hfcsusb_cnt;
|
|
static u_int protocol[MAX_CARDS] = {2,2,2,2,2,2,2,2};
|
|
static int layermask[MAX_CARDS];
|
|
|
|
static mISDNobject_t hw_mISDNObj;
|
|
static int debug = 0;
|
|
static int poll = 128;
|
|
|
|
|
|
#ifdef MODULE
|
|
#ifdef MODULE_LICENSE
|
|
MODULE_LICENSE("GPL");
|
|
#endif
|
|
#ifdef OLD_MODULE_PARAM
|
|
MODULE_PARM(debug, "1i");
|
|
MODULE_PARM(poll, "1i");
|
|
#define MODULE_PARM_T "1-4i"
|
|
MODULE_PARM(protocol, MODULE_PARM_T);
|
|
MODULE_PARM(layermask, MODULE_PARM_T);
|
|
#else
|
|
module_param(debug, uint, S_IRUGO | S_IWUSR);
|
|
module_param(poll, uint, S_IRUGO | S_IWUSR);
|
|
|
|
#ifdef OLD_MODULE_PARAM_ARRAY
|
|
static int num_protocol=0, num_layermask=0;
|
|
module_param_array(protocol, uint, num_protocol, S_IRUGO | S_IWUSR);
|
|
module_param_array(layermask, uint, num_layermask, S_IRUGO | S_IWUSR);
|
|
#else
|
|
module_param_array(protocol, uint, NULL, S_IRUGO | S_IWUSR);
|
|
module_param_array(layermask, uint, NULL, S_IRUGO | S_IWUSR);
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
|
|
struct _hfcsusb_t; /* forward definition */
|
|
|
|
/***************************************************************/
|
|
/* structure defining input+output fifos (interrupt/bulk mode) */
|
|
/***************************************************************/
|
|
struct usb_fifo; /* forward definition */
|
|
typedef struct iso_urb_struct {
|
|
struct urb *purb;
|
|
__u8 buffer[ISO_BUFFER_SIZE]; /* buffer incoming/outgoing USB URB data */
|
|
struct usb_fifo *owner_fifo; /* pointer to owner fifo */
|
|
} iso_urb_struct;
|
|
|
|
typedef struct usb_fifo {
|
|
int fifonum; /* fifo index attached to this structure */
|
|
int active; /* fifo is currently active */
|
|
struct _hfcsusb_t *card; /* pointer to main structure */
|
|
int pipe; /* address of endpoint */
|
|
__u8 usb_packet_maxlen; /* maximum length for usb transfer */
|
|
unsigned int max_size; /* maximum size of receive/send packet */
|
|
__u8 intervall; /* interrupt interval */
|
|
struct urb *urb; /* transfer structure for usb routines */
|
|
__u8 buffer[128]; /* buffer USB INT OUT URB data */
|
|
int bit_line; /* how much bits are in the fifo? */
|
|
|
|
volatile __u8 usb_transfer_mode; /* switched between ISO and INT */
|
|
iso_urb_struct iso[2]; /* need two urbs to have one always for pending */
|
|
__u8 ch_idx; /* link BChannel Fifos to chan[ch_idx] */
|
|
int last_urblen; /* remember length of last packet */
|
|
} usb_fifo;
|
|
|
|
typedef struct _hfcsusb_t {
|
|
struct list_head list;
|
|
channel_t chan[4]; // B1,B2,D,(PCM)
|
|
|
|
struct usb_device *dev; /* our device */
|
|
struct usb_interface *intf; /* used interface */
|
|
int if_used; /* used interface number */
|
|
int alt_used; /* used alternate config */
|
|
int cfg_used; /* configuration index used */
|
|
int vend_idx; /* index in hfcsusb_idtab */
|
|
int packet_size;
|
|
int iso_packet_size;
|
|
int disc_flag; /* 1 if device was disonnected to avoid some USB actions */
|
|
usb_fifo fifos[HFCUSB_NUM_FIFOS]; /* structure holding all fifo data */
|
|
|
|
/* control pipe background handling */
|
|
ctrl_buft ctrl_buff[HFC_CTRL_BUFSIZE]; /* buffer holding queued data */
|
|
volatile int ctrl_in_idx, ctrl_out_idx, ctrl_cnt; /* input/output pointer + count */
|
|
struct urb *ctrl_urb; /* transfer structure for control channel */
|
|
struct usb_ctrlrequest ctrl_write; /* buffer for control write request */
|
|
struct usb_ctrlrequest ctrl_read; /* same for read request */
|
|
int ctrl_paksize; /* control pipe packet size */
|
|
int ctrl_in_pipe, ctrl_out_pipe; /* handles for control pipe */
|
|
spinlock_t ctrl_lock; /* queueing ctrl urbs needs to be locked */
|
|
spinlock_t lock;
|
|
|
|
volatile __u8 threshold_mask; /* threshold in fifo flow control */
|
|
__u8 old_led_state, led_state;
|
|
|
|
__u8 portmode; /* TE ?, NT ?, NT Timer runnning? */
|
|
int nt_timer;
|
|
} hfcsusb_t;
|
|
|
|
/* private vendor specific data */
|
|
typedef struct {
|
|
__u8 led_scheme; // led display scheme
|
|
signed short led_bits[8]; // array of 8 possible LED bitmask settings
|
|
char *vend_name; // device name
|
|
} hfcsusb_vdata;
|
|
|
|
/****************************************/
|
|
/* data defining the devices to be used */
|
|
/****************************************/
|
|
static struct usb_device_id hfcsusb_idtab[] = {
|
|
{
|
|
USB_DEVICE(0x0959, 0x2bd0),
|
|
.driver_info = (unsigned long) &((hfcsusb_vdata)
|
|
{LED_OFF, {4, 0, 2, 1},
|
|
"ISDN USB TA (Cologne Chip HFC-S USB based)"}),
|
|
},
|
|
{
|
|
USB_DEVICE(0x0675, 0x1688),
|
|
.driver_info = (unsigned long) &((hfcsusb_vdata)
|
|
{LED_SCHEME1, {1, 2, 0, 0},
|
|
"DrayTek miniVigor 128 USB ISDN TA"}),
|
|
},
|
|
{
|
|
USB_DEVICE(0x07b0, 0x0007),
|
|
.driver_info = (unsigned long) &((hfcsusb_vdata)
|
|
{LED_SCHEME1, {0x80, -64, -32, -16},
|
|
"Billion tiny USB ISDN TA 128"}),
|
|
},
|
|
{
|
|
USB_DEVICE(0x0742, 0x2008),
|
|
.driver_info = (unsigned long) &((hfcsusb_vdata)
|
|
{LED_SCHEME1, {4, 0, 2, 1},
|
|
"Stollmann USB TA"}),
|
|
},
|
|
{
|
|
USB_DEVICE(0x0742, 0x2009),
|
|
.driver_info = (unsigned long) &((hfcsusb_vdata)
|
|
{LED_SCHEME1, {4, 0, 2, 1},
|
|
"Aceex USB ISDN TA"}),
|
|
},
|
|
{
|
|
USB_DEVICE(0x0742, 0x200A),
|
|
.driver_info = (unsigned long) &((hfcsusb_vdata)
|
|
{LED_SCHEME1, {4, 0, 2, 1},
|
|
"OEM USB ISDN TA"}),
|
|
},
|
|
{
|
|
USB_DEVICE(0x08e3, 0x0301),
|
|
.driver_info = (unsigned long) &((hfcsusb_vdata)
|
|
{LED_SCHEME1, {2, 0, 1, 4},
|
|
"Olitec USB RNIS"}),
|
|
},
|
|
{
|
|
USB_DEVICE(0x07fa, 0x0846),
|
|
.driver_info = (unsigned long) &((hfcsusb_vdata)
|
|
{LED_SCHEME1, {0x80, -64, -32, -16},
|
|
"Bewan Modem RNIS USB"}),
|
|
},
|
|
{
|
|
USB_DEVICE(0x07fa, 0x0847),
|
|
.driver_info = (unsigned long) &((hfcsusb_vdata)
|
|
{LED_SCHEME1, {0x80, -64, -32, -16},
|
|
"Djinn Numeris USB"}),
|
|
},
|
|
{
|
|
USB_DEVICE(0x07b0, 0x0006),
|
|
.driver_info = (unsigned long) &((hfcsusb_vdata)
|
|
{LED_SCHEME1, {0x80, -64, -32, -16},
|
|
"Twister ISDN TA"}),
|
|
},
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, hfcsusb_idtab);
|
|
|
|
/* some function prototypes */
|
|
static int hfcsusb_l2l1(mISDNinstance_t *inst, struct sk_buff *skb);
|
|
static int setup_bchannel(channel_t * bch, int protocol);
|
|
static void hfcsusb_ph_command(hfcsusb_t * card, u_char command);
|
|
static void release_card(hfcsusb_t * card);
|
|
|
|
|
|
/******************************************************/
|
|
/* start next background transfer for control channel */
|
|
/******************************************************/
|
|
static void
|
|
ctrl_start_transfer(hfcsusb_t * card)
|
|
{
|
|
if (card->ctrl_cnt) {
|
|
card->ctrl_urb->pipe = card->ctrl_out_pipe;
|
|
card->ctrl_urb->setup_packet =
|
|
(u_char *) & card->ctrl_write;
|
|
card->ctrl_urb->transfer_buffer = NULL;
|
|
card->ctrl_urb->transfer_buffer_length = 0;
|
|
card->ctrl_write.wIndex =
|
|
cpu_to_le16(card->ctrl_buff[card->ctrl_out_idx].hfcs_reg);
|
|
card->ctrl_write.wValue =
|
|
cpu_to_le16(card->ctrl_buff[card->ctrl_out_idx].reg_val);
|
|
|
|
usb_submit_urb(card->ctrl_urb, GFP_ATOMIC); /* start transfer */
|
|
}
|
|
} /* ctrl_start_transfer */
|
|
|
|
/************************************/
|
|
/* queue a control transfer request */
|
|
/* to write HFC-S USB register */
|
|
/* return 0 on success. */
|
|
/************************************/
|
|
static int
|
|
queued_Write_hfc(hfcsusb_t * card, __u8 reg, __u8 val)
|
|
{
|
|
ctrl_buft *buf;
|
|
|
|
spin_lock(&card->ctrl_lock);
|
|
if (card->ctrl_cnt >= HFC_CTRL_BUFSIZE)
|
|
return (1); /* no space left */
|
|
buf = &card->ctrl_buff[card->ctrl_in_idx]; /* pointer to new index */
|
|
buf->hfcs_reg = reg;
|
|
buf->reg_val = val;
|
|
if (++card->ctrl_in_idx >= HFC_CTRL_BUFSIZE)
|
|
card->ctrl_in_idx = 0; /* pointer wrap */
|
|
if (++card->ctrl_cnt == 1)
|
|
ctrl_start_transfer(card);
|
|
spin_unlock(&card->ctrl_lock);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/***************************************************************/
|
|
/* control completion routine handling background control cmds */
|
|
/***************************************************************/
|
|
static void
|
|
ctrl_complete(struct urb *urb, struct pt_regs *regs)
|
|
{
|
|
hfcsusb_t *card = (hfcsusb_t *) urb->context;
|
|
ctrl_buft *buf;
|
|
|
|
urb->dev = card->dev;
|
|
if (card->ctrl_cnt) {
|
|
buf = &card->ctrl_buff[card->ctrl_out_idx];
|
|
card->ctrl_cnt--; /* decrement actual count */
|
|
if (++card->ctrl_out_idx >= HFC_CTRL_BUFSIZE)
|
|
card->ctrl_out_idx = 0; /* pointer wrap */
|
|
|
|
ctrl_start_transfer(card); /* start next transfer */
|
|
}
|
|
}
|
|
|
|
/***************************************************/
|
|
/* write led data to auxport & invert if necessary */
|
|
/***************************************************/
|
|
static void
|
|
write_led(hfcsusb_t * card, __u8 led_state)
|
|
{
|
|
if (led_state != card->old_led_state) {
|
|
card->old_led_state = led_state;
|
|
queued_Write_hfc(card, HFCUSB_P_DATA, led_state);
|
|
}
|
|
}
|
|
|
|
/*********************/
|
|
/* handle LED bits */
|
|
/*********************/
|
|
static void
|
|
set_led_bit(hfcsusb_t * card, signed short led_bits, int unset)
|
|
{
|
|
if (unset) {
|
|
if (led_bits < 0)
|
|
card->led_state |= abs(led_bits);
|
|
else
|
|
card->led_state &= ~led_bits;
|
|
} else {
|
|
if (led_bits < 0)
|
|
card->led_state &= ~abs(led_bits);
|
|
else
|
|
card->led_state |= led_bits;
|
|
}
|
|
}
|
|
|
|
/************************/
|
|
/* handle LED requests */
|
|
/************************/
|
|
static void
|
|
handle_led(hfcsusb_t * card, int event)
|
|
{
|
|
hfcsusb_vdata *driver_info =
|
|
(hfcsusb_vdata *) hfcsusb_idtab[card->vend_idx].driver_info;
|
|
|
|
if (driver_info->led_scheme == LED_OFF) {
|
|
return;
|
|
}
|
|
|
|
switch (event) {
|
|
case LED_POWER_ON:
|
|
set_led_bit(card, driver_info->led_bits[0], 0);
|
|
set_led_bit(card, driver_info->led_bits[1], 1);
|
|
set_led_bit(card, driver_info->led_bits[2], 1);
|
|
set_led_bit(card, driver_info->led_bits[3], 1);
|
|
break;
|
|
case LED_POWER_OFF:
|
|
set_led_bit(card, driver_info->led_bits[0], 1);
|
|
set_led_bit(card, driver_info->led_bits[1], 1);
|
|
set_led_bit(card, driver_info->led_bits[2], 1);
|
|
set_led_bit(card, driver_info->led_bits[3], 1);
|
|
break;
|
|
case LED_S0_ON:
|
|
set_led_bit(card, driver_info->led_bits[1], 0);
|
|
break;
|
|
case LED_S0_OFF:
|
|
set_led_bit(card, driver_info->led_bits[1], 1);
|
|
break;
|
|
case LED_B1_ON:
|
|
set_led_bit(card, driver_info->led_bits[2], 0);
|
|
break;
|
|
case LED_B1_OFF:
|
|
set_led_bit(card, driver_info->led_bits[2], 1);
|
|
break;
|
|
case LED_B2_ON:
|
|
set_led_bit(card, driver_info->led_bits[3], 0);
|
|
break;
|
|
case LED_B2_OFF:
|
|
set_led_bit(card, driver_info->led_bits[3], 1);
|
|
break;
|
|
}
|
|
write_led(card, card->led_state);
|
|
}
|
|
|
|
|
|
/*********************************/
|
|
/* S0 state change event handler */
|
|
/*********************************/
|
|
static void
|
|
S0_new_state(channel_t * dch)
|
|
{
|
|
u_int prim = PH_SIGNAL | INDICATION;
|
|
u_int para = 0;
|
|
hfcsusb_t *card = dch->inst.privat;
|
|
|
|
if (card->portmode & PORT_MODE_TE) {
|
|
if (dch->debug)
|
|
mISDN_debugprint(&card->chan[D].inst,
|
|
"%s: TE %d",
|
|
__FUNCTION__, dch->state);
|
|
|
|
switch (dch->state) {
|
|
case (0):
|
|
prim = PH_CONTROL | INDICATION;
|
|
para = HW_RESET;
|
|
break;
|
|
case (3):
|
|
prim = PH_CONTROL | INDICATION;
|
|
para = HW_DEACTIVATE;
|
|
handle_led(card, LED_S0_OFF);
|
|
break;
|
|
case (5):
|
|
case (8):
|
|
para = ANYSIGNAL;
|
|
break;
|
|
case (6):
|
|
para = INFO2;
|
|
break;
|
|
case (7):
|
|
para = INFO4_P8;
|
|
handle_led(card, LED_S0_ON);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
if (dch->state== 7)
|
|
test_and_set_bit(FLG_ACTIVE, &dch->Flags);
|
|
else
|
|
test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
|
|
|
|
} else {
|
|
if (dch->debug)
|
|
mISDN_debugprint(&card->chan[D].inst,
|
|
"%s: NT %d",
|
|
__FUNCTION__, dch->state);
|
|
|
|
switch (dch->state) {
|
|
case (1):
|
|
test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
|
|
card->nt_timer = 0;
|
|
card->portmode &= ~NT_ACTIVATION_TIMER;
|
|
prim = PH_DEACTIVATE | INDICATION;
|
|
para = 0;
|
|
handle_led(card, LED_S0_OFF);
|
|
break;
|
|
|
|
case (2):
|
|
if (card->nt_timer < 0) {
|
|
card->nt_timer = 0;
|
|
card->portmode &= ~NT_ACTIVATION_TIMER;
|
|
hfcsusb_ph_command(dch->hw, HFC_L1_DEACTIVATE_NT);
|
|
} else {
|
|
card->portmode |= NT_ACTIVATION_TIMER;
|
|
card->nt_timer = NT_T1_COUNT;
|
|
/* allow G2 -> G3 transition */
|
|
queued_Write_hfc(card, HFCUSB_STATES, 2 | HFCUSB_NT_G2_G3);
|
|
}
|
|
return;
|
|
case (3):
|
|
test_and_set_bit(FLG_ACTIVE, &dch->Flags);
|
|
card->nt_timer = 0;
|
|
card->portmode &= ~NT_ACTIVATION_TIMER;
|
|
prim = PH_ACTIVATE | CONFIRM;
|
|
para = 0;
|
|
handle_led(card, LED_S0_ON);
|
|
break;
|
|
case (4):
|
|
card->nt_timer = 0;
|
|
card->portmode &= ~NT_ACTIVATION_TIMER;
|
|
return;
|
|
default:
|
|
break;
|
|
}
|
|
mISDN_queue_data(&dch->inst, dch->inst.id | MSG_BROADCAST,
|
|
MGR_SHORTSTATUS | INDICATION, test_bit(FLG_ACTIVE, &dch->Flags) ?
|
|
SSTATUS_L1_ACTIVATED : SSTATUS_L1_DEACTIVATED,
|
|
0, NULL, 0);
|
|
}
|
|
mISDN_queue_data(&dch->inst, FLG_MSG_UP, prim, para, 0, NULL, 0);
|
|
}
|
|
|
|
/******************************/
|
|
/* trigger S0 state changes */
|
|
/******************************/
|
|
static void
|
|
state_handler(hfcsusb_t * card, __u8 new_l1_state)
|
|
{
|
|
if (new_l1_state == card->chan[D].state
|
|
|| new_l1_state < 1 || new_l1_state > 8)
|
|
return;
|
|
|
|
card->chan[D].state = new_l1_state;
|
|
S0_new_state(&card->chan[D]);
|
|
}
|
|
|
|
/*
|
|
* B-channel setup routine, setup the selected B-channel mode for a given
|
|
* protocol
|
|
* It also maybe change the B-channel timeslot to match the allocated slot
|
|
*
|
|
* basic protocol values
|
|
* -1 used for first time setup during init
|
|
* ISDN_PID_NONE unused channel, idle mode (disconnected)
|
|
* ISDN_PID_L1_B_64TRANS 64 kBit transparent
|
|
* ISDN_PID_L1_B_64HDLC 64 kBit HDLC framing
|
|
*
|
|
* if the hardware supports more protocols, they should be handled too
|
|
*/
|
|
static int
|
|
setup_bchannel(channel_t * bch, int protocol)
|
|
{
|
|
__u8 conhdlc, sctrl, sctrl_r; /* conatainer for new register vals */
|
|
|
|
hfcsusb_t *card = bch->inst.privat;
|
|
|
|
if (bch->debug & L1_DEB_HSCX)
|
|
mISDN_debugprint(&bch->inst,
|
|
"protocol %x-->%x channel(%d)",
|
|
bch->state, protocol,
|
|
bch->channel);
|
|
|
|
/* setup val for CON_HDLC */
|
|
conhdlc = 0;
|
|
if (protocol > ISDN_PID_NONE)
|
|
conhdlc = 8; /* enable FIFO */
|
|
|
|
switch (protocol) {
|
|
case (-1): /* used for init */
|
|
bch->state = -1;
|
|
/* fall trough */
|
|
case (ISDN_PID_NONE):
|
|
if (bch->state == ISDN_PID_NONE)
|
|
return (0); /* already in idle state */
|
|
bch->state = ISDN_PID_NONE;
|
|
test_and_clear_bit(FLG_HDLC, &bch->Flags);
|
|
test_and_clear_bit(FLG_TRANSPARENT, &bch->Flags);
|
|
break;
|
|
case (ISDN_PID_L1_B_64TRANS):
|
|
conhdlc |= 2;
|
|
bch->state = protocol;
|
|
set_bit(FLG_TRANSPARENT, &bch->Flags);
|
|
break;
|
|
case (ISDN_PID_L1_B_64HDLC):
|
|
bch->state = protocol;
|
|
set_bit(FLG_HDLC, &bch->Flags);
|
|
break;
|
|
default:
|
|
mISDN_debugprint(&bch->inst, "prot not known %x",
|
|
protocol);
|
|
return (-ENOPROTOOPT);
|
|
}
|
|
|
|
if (protocol >= ISDN_PID_NONE) {
|
|
/*
|
|
printk ("HFCS-USB: %s: HFCUSB_FIFO(0x%x) HFCUSB_CON_HDLC(0x%x)\n",
|
|
__FUNCTION__, (bch->channel)?2:0, conhdlc);
|
|
*/
|
|
|
|
/* set FIFO to transmit register */
|
|
queued_Write_hfc(card, HFCUSB_FIFO,
|
|
(bch->channel)?2:0);
|
|
queued_Write_hfc(card, HFCUSB_CON_HDLC, conhdlc);
|
|
|
|
/* reset fifo */
|
|
queued_Write_hfc(card, HFCUSB_INC_RES_F, 2);
|
|
|
|
/*
|
|
printk ("HFCS-USB: %s: HFCUSB_FIFO(0x%x) HFCUSB_CON_HDLC(0x%x)\n",
|
|
__FUNCTION__, (bch->channel)?2:0, conhdlc);
|
|
*/
|
|
|
|
/* set FIFO to receive register */
|
|
queued_Write_hfc(card, HFCUSB_FIFO,
|
|
((bch->channel)?3:1));
|
|
queued_Write_hfc(card, HFCUSB_CON_HDLC, conhdlc);
|
|
|
|
/* reset fifo */
|
|
queued_Write_hfc(card, HFCUSB_INC_RES_F, 2);
|
|
|
|
sctrl = 0x40 + ((card->portmode & PORT_MODE_TE)?0x00:0x04);
|
|
sctrl_r = 0x0;
|
|
|
|
if (card->chan[B1].state) {
|
|
sctrl |= ((card->chan[B1].channel)?2:1);
|
|
sctrl_r |= ((card->chan[B1].channel)?2:1);
|
|
}
|
|
|
|
if (card->chan[B2].state) {
|
|
sctrl |= ((card->chan[B2].channel)?2:1);
|
|
sctrl_r |= ((card->chan[B2].channel)?2:1);
|
|
}
|
|
|
|
/*
|
|
printk ("HFCS-USB: %s: HFCUSB_SCTRL(0x%x) HFCUSB_SCTRL_R(0x%x)\n",
|
|
__FUNCTION__, sctrl, sctrl_r);
|
|
*/
|
|
|
|
queued_Write_hfc(card, HFCUSB_SCTRL, sctrl);
|
|
queued_Write_hfc(card, HFCUSB_SCTRL_R, sctrl_r);
|
|
|
|
if (protocol > ISDN_PID_NONE) {
|
|
handle_led(card, ((bch->channel)?LED_B2_ON:LED_B1_ON));
|
|
} else {
|
|
handle_led(card, ((bch->channel)?LED_B2_OFF:LED_B1_OFF));
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
hfcsusb_ph_command(hfcsusb_t * card, u_char command)
|
|
{
|
|
if (card->chan[D].debug & L1_DEB_ISAC)
|
|
mISDN_debugprint(&card->chan[D].inst, "hfcsusb_ph_command %x",
|
|
command);
|
|
|
|
switch (command) {
|
|
case HFC_L1_ACTIVATE_TE:
|
|
/* force sending sending INFO1 */
|
|
queued_Write_hfc(card, HFCUSB_STATES, 0x14);
|
|
/* start l1 activation */
|
|
queued_Write_hfc(card, HFCUSB_STATES, 0x04);
|
|
break;
|
|
|
|
case HFC_L1_FORCE_DEACTIVATE_TE:
|
|
queued_Write_hfc(card, HFCUSB_STATES, 0x10);
|
|
queued_Write_hfc(card, HFCUSB_STATES, 0x03);
|
|
break;
|
|
|
|
case HFC_L1_ACTIVATE_NT:
|
|
if (card->chan[D].state == 3) {
|
|
mISDN_queue_data(&card->chan[D].inst, FLG_MSG_UP, PH_ACTIVATE | INDICATION, 0, 0, NULL, 0);
|
|
} else {
|
|
queued_Write_hfc(card, HFCUSB_STATES,
|
|
HFCUSB_ACTIVATE
|
|
| HFCUSB_DO_ACTION
|
|
| HFCUSB_NT_G2_G3);
|
|
}
|
|
break;
|
|
|
|
case HFC_L1_DEACTIVATE_NT:
|
|
queued_Write_hfc(card, HFCUSB_STATES,
|
|
HFCUSB_DO_ACTION);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*************************************/
|
|
/* Layer 1 D-channel hardware access */
|
|
/*************************************/
|
|
static int
|
|
handle_dmsg(channel_t *dch, struct sk_buff *skb)
|
|
{
|
|
int ret = 0;
|
|
mISDN_head_t *hh = mISDN_HEAD_P(skb);
|
|
hfcsusb_t *hw = dch->hw;
|
|
|
|
if (hh->prim == (PH_SIGNAL | REQUEST)) {
|
|
ret = -EINVAL;
|
|
} else if (hh->prim == (PH_CONTROL | REQUEST)) {
|
|
if (hh->dinfo == HW_RESET) {
|
|
if (dch->state != 0)
|
|
hfcsusb_ph_command(hw, HFC_L1_ACTIVATE_TE);
|
|
skb_trim(skb, 0);
|
|
return(mISDN_queueup_newhead(&dch->inst, 0, PH_CONTROL | INDICATION,HW_POWERUP, skb));
|
|
} else if (hh->dinfo == HW_DEACTIVATE) {
|
|
if (dch->next_skb) {
|
|
dev_kfree_skb(dch->next_skb);
|
|
dch->next_skb = NULL;
|
|
}
|
|
test_and_clear_bit(FLG_TX_NEXT, &dch->Flags);
|
|
test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
|
|
#ifdef FIXME
|
|
if (test_and_clear_bit(FLG_L1_DBUSY, &dch->Flags))
|
|
dchannel_sched_event(dch, D_CLEARBUSY);
|
|
#endif
|
|
} else if (hh->dinfo == HW_POWERUP) {
|
|
hfcsusb_ph_command(hw, HFC_L1_FORCE_DEACTIVATE_TE);
|
|
} else {
|
|
if (dch->debug & L1_DEB_WARN)
|
|
mISDN_debugprint(&dch->inst,
|
|
"hfcsusb_l1hw unknown ctrl %x",
|
|
hh->dinfo);
|
|
ret = -EINVAL;
|
|
}
|
|
} else if (hh->prim == (PH_ACTIVATE | REQUEST)) {
|
|
if (hw->portmode & PORT_MODE_NT) {
|
|
hfcsusb_ph_command(hw, HFC_L1_ACTIVATE_NT);
|
|
} else {
|
|
if (dch->debug & L1_DEB_WARN)
|
|
mISDN_debugprint(&dch->inst,
|
|
"%s: PH_ACTIVATE none NT mode",
|
|
__FUNCTION__);
|
|
ret = -EINVAL;
|
|
}
|
|
} else if (hh->prim == (PH_DEACTIVATE | REQUEST)) {
|
|
if (hw->portmode & PORT_MODE_NT) {
|
|
hfcsusb_ph_command(hw, HFC_L1_DEACTIVATE_NT);
|
|
if (test_and_clear_bit(FLG_TX_NEXT, &dch->Flags)) {
|
|
dev_kfree_skb(dch->next_skb);
|
|
dch->next_skb = NULL;
|
|
}
|
|
if (dch->tx_skb) {
|
|
dev_kfree_skb(dch->tx_skb);
|
|
dch->tx_skb = NULL;
|
|
}
|
|
dch->tx_idx = 0;
|
|
if (dch->rx_skb) {
|
|
dev_kfree_skb(dch->rx_skb);
|
|
dch->rx_skb = NULL;
|
|
}
|
|
test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
|
|
test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
|
|
} else {
|
|
if (dch->debug & L1_DEB_WARN)
|
|
mISDN_debugprint(&dch->inst,
|
|
"%s: PH_DEACTIVATE none NT mode",
|
|
__FUNCTION__);
|
|
ret = -EINVAL;
|
|
}
|
|
} else if ((hh->prim & MISDN_CMD_MASK) == MGR_SHORTSTATUS) {
|
|
u_int temp = hh->dinfo & SSTATUS_ALL; // remove SSTATUS_BROADCAST_BIT
|
|
if ((hw->portmode & PORT_MODE_NT) &&
|
|
(temp == SSTATUS_ALL || temp == SSTATUS_L1)) {
|
|
if (hh->dinfo & SSTATUS_BROADCAST_BIT)
|
|
temp = dch->inst.id | MSG_BROADCAST;
|
|
else
|
|
temp = hh->addr | FLG_MSG_TARGET;
|
|
skb_trim(skb, 0);
|
|
hh->dinfo = test_bit(FLG_ACTIVE, &dch->Flags) ?
|
|
SSTATUS_L1_ACTIVATED : SSTATUS_L1_DEACTIVATED;
|
|
hh->prim = MGR_SHORTSTATUS | CONFIRM;
|
|
return(mISDN_queue_message(&dch->inst, temp, skb));
|
|
}
|
|
ret = -EOPNOTSUPP;
|
|
} else {
|
|
printk(KERN_WARNING "%s %s: unknown prim(%x)\n",
|
|
dch->inst.name, __FUNCTION__, hh->prim);
|
|
ret = -EAGAIN;
|
|
}
|
|
if (!ret)
|
|
dev_kfree_skb(skb);
|
|
return (ret);
|
|
}
|
|
|
|
/*************************************/
|
|
/* Layer 1 B-channel hardware access */
|
|
/*************************************/
|
|
static int
|
|
handle_bmsg(channel_t *bch, struct sk_buff *skb)
|
|
{
|
|
int ret = 0;
|
|
mISDN_head_t *hh = mISDN_HEAD_P(skb);
|
|
hfcsusb_t *hw = bch->hw;
|
|
u_long flags;
|
|
|
|
if ((hh->prim == (PH_ACTIVATE | REQUEST)) ||
|
|
(hh->prim == (DL_ESTABLISH | REQUEST))) {
|
|
spin_lock_irqsave(&hw->lock, flags);
|
|
if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags)) {
|
|
ret = setup_bchannel(bch, bch->inst.pid.protocol[1]);
|
|
if (bch->inst.pid.protocol[2] == ISDN_PID_L2_B_TRANS)
|
|
test_and_set_bit(FLG_L2DATA, &bch->Flags);
|
|
}
|
|
spin_unlock_irqrestore(&hw->lock, flags);
|
|
#ifdef FIXME
|
|
if (bch->inst.pid.protocol[2] == ISDN_PID_L2_B_RAWDEV)
|
|
if (bch->dev)
|
|
if_link(&bch->dev->rport.pif,
|
|
hh->prim | CONFIRM, 0, 0, NULL, 0);
|
|
#endif
|
|
skb_trim(skb, 0);
|
|
return(mISDN_queueup_newhead(&bch->inst, 0, hh->prim | CONFIRM, ret, skb));
|
|
} else if ((hh->prim == (PH_DEACTIVATE | REQUEST)) ||
|
|
(hh->prim == (DL_RELEASE | REQUEST)) ||
|
|
((hh->prim == (PH_CONTROL | REQUEST) && (hh->dinfo == HW_DEACTIVATE)))) {
|
|
|
|
spin_lock_irqsave(&hw->lock, flags);
|
|
if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
|
|
dev_kfree_skb(bch->next_skb);
|
|
bch->next_skb = NULL;
|
|
}
|
|
if (bch->tx_skb) {
|
|
dev_kfree_skb(bch->tx_skb);
|
|
bch->tx_skb = NULL;
|
|
}
|
|
bch->tx_idx = 0;
|
|
if (bch->rx_skb) {
|
|
dev_kfree_skb(bch->rx_skb);
|
|
bch->rx_skb = NULL;
|
|
}
|
|
test_and_clear_bit(FLG_L2DATA, &bch->Flags);
|
|
test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
|
|
setup_bchannel(bch, ISDN_PID_NONE);
|
|
test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
|
|
spin_unlock_irqrestore(&hw->lock, flags);
|
|
skb_trim(skb, 0);
|
|
if (hh->prim != (PH_CONTROL | REQUEST)) {
|
|
#ifdef FIXME
|
|
if (bch->inst.pid.protocol[2] == ISDN_PID_L2_B_RAWDEV)
|
|
if (bch->dev)
|
|
if_link(&bch->dev->rport.pif,
|
|
hh->prim | CONFIRM, 0, 0, NULL, 0);
|
|
#endif
|
|
if (!mISDN_queueup_newhead(&bch->inst, 0, hh->prim | CONFIRM, 0, skb))
|
|
return(0);
|
|
}
|
|
} else if (hh->prim == (PH_CONTROL | REQUEST)) {
|
|
// do not handle PH_CONTROL | REQUEST ??
|
|
} else {
|
|
printk(KERN_WARNING "%s %s: unknown prim(%x)\n",
|
|
bch->inst.name, __FUNCTION__, hh->prim);
|
|
ret = -EAGAIN;
|
|
}
|
|
if (!ret)
|
|
dev_kfree_skb(skb);
|
|
return (ret);
|
|
}
|
|
|
|
/******************************/
|
|
/* Layer2 -> Layer 1 Transfer */
|
|
/******************************/
|
|
static int
|
|
hfcsusb_l2l1(mISDNinstance_t *inst, struct sk_buff *skb)
|
|
{
|
|
channel_t *chan = container_of(inst, channel_t, inst);
|
|
int ret = 0;
|
|
mISDN_head_t *hh = mISDN_HEAD_P(skb);
|
|
u_long flags;
|
|
int i;
|
|
|
|
if ((hh->prim == PH_DATA_REQ) || (hh->prim == DL_DATA_REQ)) {
|
|
spin_lock_irqsave(inst->hwlock, flags);
|
|
ret = channel_senddata(chan, hh->dinfo, skb);
|
|
if (ret > 0) {
|
|
|
|
if (!(chan)) {
|
|
printk (KERN_INFO "HFC-S USB: CRITICAL ERROR! chan is NULL pointer!\n");
|
|
spin_unlock_irqrestore(inst->hwlock, flags);
|
|
return(-EINVAL);
|
|
}
|
|
|
|
if (!(chan->tx_skb)) {
|
|
printk (KERN_INFO "HFC-S USB: CRITICAL ERROR! channel_senddata returned %d without chan->tx_skb\n", ret);
|
|
spin_unlock_irqrestore(inst->hwlock, flags);
|
|
return(-EINVAL);
|
|
}
|
|
|
|
/* channel data debug: */
|
|
if ((chan->debug) && (debug & DEBUG_HFC_FIFO)) {
|
|
mISDN_debugprint(&chan->inst,
|
|
"new TX channel(%i) len(%i): ",
|
|
chan->channel, chan->tx_skb->len);
|
|
i = 0;
|
|
printk(" ");
|
|
while (i < chan->tx_skb->len)
|
|
printk("%02x ", chan->tx_skb->data[i++]);
|
|
printk("\n");
|
|
}
|
|
|
|
/* data gets transmitted later in USB ISO OUT traffic */
|
|
ret = 0;
|
|
}
|
|
spin_unlock_irqrestore(inst->hwlock, flags);
|
|
return(ret);
|
|
}
|
|
if (test_bit(FLG_DCHANNEL, &chan->Flags)) {
|
|
ret = handle_dmsg(chan, skb);
|
|
if (ret != -EAGAIN)
|
|
return(ret);
|
|
ret = -EINVAL;
|
|
}
|
|
if (test_bit(FLG_BCHANNEL, &chan->Flags)) {
|
|
ret = handle_bmsg(chan, skb);
|
|
if (ret != -EAGAIN)
|
|
return(ret);
|
|
ret = -EINVAL;
|
|
}
|
|
if (!ret)
|
|
dev_kfree_skb(skb);
|
|
return(ret);
|
|
}
|
|
|
|
|
|
static int
|
|
hfcsusb_manager(void *data, u_int prim, void *arg)
|
|
{
|
|
hfcsusb_t *hw = NULL;
|
|
mISDNinstance_t *inst = data;
|
|
struct sk_buff *skb;
|
|
int channel = -1;
|
|
int i;
|
|
channel_t *chan = NULL;
|
|
u_long flags;
|
|
|
|
if (!data) {
|
|
MGR_HASPROTOCOL_HANDLER(prim, arg, &hw_mISDNObj)
|
|
printk(KERN_ERR "%s %s: no data prim %x arg %p\n",
|
|
hw->chan[D].inst.name, __FUNCTION__, prim, arg);
|
|
return (-EINVAL);
|
|
}
|
|
|
|
spin_lock_irqsave(&hw_mISDNObj.lock, flags);
|
|
|
|
/* find channel and card */
|
|
list_for_each_entry(hw, &hw_mISDNObj.ilist, list) {
|
|
i = 0;
|
|
while (i < MAX_CHAN) {
|
|
if (hw->chan[i].Flags &&
|
|
&hw->chan[i].inst == inst) {
|
|
channel = i;
|
|
chan = &hw->chan[i];
|
|
break;
|
|
}
|
|
i++;
|
|
}
|
|
if (channel >= 0)
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&hw_mISDNObj.lock, flags);
|
|
|
|
if (channel < 0) {
|
|
printk(KERN_ERR
|
|
"%s: no card/channel found data %p prim %x arg %p\n",
|
|
__FUNCTION__, data, prim, arg);
|
|
return (-EINVAL);
|
|
}
|
|
|
|
switch (prim) {
|
|
case MGR_REGLAYER | CONFIRM:
|
|
mISDN_setpara(chan, &inst->st->para);
|
|
break;
|
|
case MGR_UNREGLAYER | REQUEST:
|
|
if ((skb = create_link_skb(PH_CONTROL | REQUEST,
|
|
HW_DEACTIVATE, 0, NULL, 0))) {
|
|
if (hfcsusb_l2l1(inst, skb))
|
|
dev_kfree_skb(skb);
|
|
} else
|
|
printk(KERN_WARNING "no SKB in %s MGR_UNREGLAYER | REQUEST\n", __FUNCTION__);
|
|
mISDN_ctrl(inst, MGR_UNREGLAYER | REQUEST, NULL);
|
|
break;
|
|
case MGR_CLRSTPARA | INDICATION:
|
|
arg = NULL;
|
|
case MGR_ADDSTPARA | INDICATION:
|
|
mISDN_setpara(chan, arg);
|
|
break;
|
|
case MGR_RELEASE | INDICATION:
|
|
if (channel == 2) {
|
|
release_card(hw);
|
|
} else {
|
|
hw_mISDNObj.refcnt--;
|
|
}
|
|
break;
|
|
case MGR_SETSTACK | INDICATION:
|
|
if ((channel != 2) && (inst->pid.global == 2)) {
|
|
if ((skb = create_link_skb(PH_ACTIVATE | REQUEST,
|
|
0, 0, NULL, 0))) {
|
|
if (hfcsusb_l2l1(inst, skb))
|
|
dev_kfree_skb(skb);
|
|
}
|
|
if (inst->pid.protocol[2] == ISDN_PID_L2_B_TRANS)
|
|
mISDN_queue_data(inst, FLG_MSG_UP, DL_ESTABLISH | INDICATION,
|
|
0, 0, NULL, 0);
|
|
else
|
|
mISDN_queue_data(inst, FLG_MSG_UP, PH_ACTIVATE | INDICATION,
|
|
0, 0, NULL, 0);
|
|
}
|
|
break;
|
|
case MGR_GLOBALOPT | REQUEST:
|
|
if (arg) {
|
|
// FIXME: detect cards with HEADSET
|
|
u_int *gopt = arg;
|
|
*gopt = GLOBALOPT_INTERNAL_CTRL |
|
|
GLOBALOPT_EXTERNAL_EQUIPMENT |
|
|
GLOBALOPT_HANDSET;
|
|
} else
|
|
return (-EINVAL);
|
|
break;
|
|
case MGR_SELCHANNEL | REQUEST:
|
|
// no special procedure
|
|
return (-EINVAL);
|
|
PRIM_NOT_HANDLED(MGR_CTRLREADY | INDICATION);
|
|
default:
|
|
printk(KERN_WARNING "%s %s: prim %x not handled\n",
|
|
hw->chan[D].inst.name, __FUNCTION__, prim);
|
|
return (-EINVAL);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
|
|
/***********************************************/
|
|
/* collect data from interrupt or isochron in */
|
|
/***********************************************/
|
|
static void
|
|
collect_rx_frame(usb_fifo * fifo, __u8 * data, unsigned int len, int finish)
|
|
{
|
|
hfcsusb_t *card = fifo->card;
|
|
channel_t *ch = &card->chan[fifo->ch_idx];
|
|
struct sk_buff *skb; /* data buffer for upper layer */
|
|
int fifon;
|
|
int i;
|
|
|
|
if (!len)
|
|
return;
|
|
|
|
fifon = fifo->fifonum;
|
|
|
|
if (!ch->rx_skb) {
|
|
printk(KERN_INFO "alloc new skb for fifon(%d), len(%d+%d)\n", fifon, ch->maxlen + 3, ch->up_headerlen);
|
|
ch->rx_skb = alloc_stack_skb(ch->maxlen + 3, ch->up_headerlen);
|
|
if (!ch->rx_skb) {
|
|
printk(KERN_DEBUG "%s: No mem for rx_skb\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
skb_trim(ch->rx_skb, 0);
|
|
}
|
|
|
|
if (fifon == HFCUSB_D_RX) {
|
|
/* D-Channel SKK range check */
|
|
if ((ch->rx_skb->len + len) >= MAX_DFRAME_LEN_L1) {
|
|
printk(KERN_DEBUG "%s: sbk mem exceeded for fifo(%d) HFCUSB_D_RX\n",
|
|
__FUNCTION__, fifon);
|
|
skb_trim(ch->rx_skb, 0);
|
|
return;
|
|
}
|
|
} else {
|
|
/* B-Channel SKB range check */
|
|
if ((ch->rx_skb->len + len) >= (MAX_BCH_SIZE + 3)) {
|
|
printk(KERN_DEBUG "%s: sbk mem exceeded for fifo(%d) HFCUSB_B_RX\n",
|
|
__FUNCTION__, fifon);
|
|
skb_trim(ch->rx_skb, 0);
|
|
return;
|
|
}
|
|
}
|
|
|
|
// printk ("skb_put: len(%d) new_len(%d)", ch->rx_skb->len, len);
|
|
memcpy(skb_put(ch->rx_skb, len), data, len);
|
|
|
|
if (test_bit(FLG_HDLC, &ch->Flags)) {
|
|
/* we have a complete hdlc packet */
|
|
if (finish) {
|
|
if ((ch->rx_skb->len > 3) &&
|
|
(!(ch->rx_skb->data[ch->rx_skb->len - 1]))) {
|
|
|
|
if ((ch->debug) && (debug & DEBUG_HFC_FIFO)) {
|
|
mISDN_debugprint(&ch->inst,
|
|
"fifon(%i) new RX len(%i): ",
|
|
fifon, ch->rx_skb->len);
|
|
i = 0;
|
|
printk(" ");
|
|
while (i < ch->rx_skb->len)
|
|
printk("%02x ", ch->rx_skb->data[i++]);
|
|
printk("\n");
|
|
}
|
|
|
|
/* remove CRC & status */
|
|
skb_trim(ch->rx_skb, ch->rx_skb->len - 3);
|
|
|
|
if (ch->rx_skb->len < MISDN_COPY_SIZE) {
|
|
skb = alloc_stack_skb(ch->rx_skb->len, ch->up_headerlen);
|
|
if (skb) {
|
|
memcpy(skb_put(skb, ch->rx_skb->len),
|
|
ch->rx_skb->data, ch->rx_skb->len);
|
|
skb_trim(ch->rx_skb, 0);
|
|
} else {
|
|
skb = ch->rx_skb;
|
|
ch->rx_skb = NULL;
|
|
}
|
|
} else {
|
|
skb = ch->rx_skb;
|
|
ch->rx_skb = NULL;
|
|
}
|
|
queue_ch_frame(ch, INDICATION, MISDN_ID_ANY, skb);
|
|
} else {
|
|
printk ("HFC-S USB: CRC or minlen ERROR fifon(%i) RX len(%i): ",
|
|
fifon, ch->rx_skb->len);
|
|
if (ch->debug) {
|
|
i = 0;
|
|
printk(" ");
|
|
while (i < ch->rx_skb->len)
|
|
printk("%02x ", ch->rx_skb->data[i++]);
|
|
printk("\n");
|
|
}
|
|
skb_trim(ch->rx_skb, 0);
|
|
}
|
|
}
|
|
} else {
|
|
if (finish || ch->rx_skb->len >= poll) {
|
|
printk(KERN_DEBUG "%s: queueing transp data fifon(%i) (%i)\n", __FUNCTION__, fifon, ch->rx_skb->len);
|
|
|
|
/* deliver transparent data to layer2 */
|
|
queue_ch_frame(ch, INDICATION, MISDN_ID_ANY, ch->rx_skb);
|
|
ch->rx_skb = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
void
|
|
fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe,
|
|
void *buf, int num_packets, int packet_size, int interval,
|
|
usb_complete_t complete, void *context)
|
|
{
|
|
int k;
|
|
|
|
spin_lock_init(&urb->lock);
|
|
urb->dev = dev;
|
|
urb->pipe = pipe;
|
|
urb->complete = complete;
|
|
urb->number_of_packets = num_packets;
|
|
urb->transfer_buffer_length = packet_size * num_packets;
|
|
urb->context = context;
|
|
urb->transfer_buffer = buf;
|
|
urb->transfer_flags = URB_ISO_ASAP;
|
|
urb->actual_length = 0;
|
|
urb->interval = interval;
|
|
for (k = 0; k < num_packets; k++) {
|
|
urb->iso_frame_desc[k].offset = packet_size * k;
|
|
urb->iso_frame_desc[k].length = packet_size;
|
|
urb->iso_frame_desc[k].actual_length = 0;
|
|
}
|
|
}
|
|
|
|
/*****************************************************/
|
|
/* receive completion routine for all ISO tx fifos */
|
|
/*****************************************************/
|
|
static void
|
|
rx_iso_complete(struct urb *urb, struct pt_regs *regs)
|
|
{
|
|
iso_urb_struct *context_iso_urb = (iso_urb_struct *) urb->context;
|
|
usb_fifo *fifo = context_iso_urb->owner_fifo;
|
|
hfcsusb_t *card = fifo->card;
|
|
int k, len, errcode, offset, num_isoc_packets, fifon, maxlen,
|
|
status;
|
|
unsigned int iso_status;
|
|
__u8 *buf;
|
|
static __u8 eof[8];
|
|
|
|
fifon = fifo->fifonum;
|
|
status = urb->status;
|
|
|
|
if (fifo->active && !status) {
|
|
num_isoc_packets = iso_packets[fifon];
|
|
maxlen = fifo->usb_packet_maxlen;
|
|
|
|
for (k = 0; k < num_isoc_packets; ++k) {
|
|
|
|
len = urb->iso_frame_desc[k].actual_length;
|
|
offset = urb->iso_frame_desc[k].offset;
|
|
buf = context_iso_urb->buffer + offset;
|
|
iso_status = urb->iso_frame_desc[k].status;
|
|
|
|
if (iso_status && !card->disc_flag)
|
|
printk(KERN_INFO
|
|
"HFC-S USB: ISO packet failure - status:%x",
|
|
iso_status);
|
|
|
|
/*
|
|
USB data log for every ISO in:
|
|
if (fifon == 1) {
|
|
printk ("(%d/%d) len(%d) ", k, num_isoc_packets-1, len);
|
|
for (i=0; i<len; i++) {
|
|
printk ("%x ", buf[i]);
|
|
}
|
|
printk ("\n");
|
|
}
|
|
*/
|
|
|
|
if (fifo->last_urblen != maxlen) {
|
|
/* the threshold mask is in the 2nd status byte */
|
|
card->threshold_mask = buf[1];
|
|
/* care for L1 state only for D-Channel
|
|
to avoid overlapped iso completions */
|
|
|
|
if (fifon == HFCUSB_D_RX) {
|
|
/* the S0 state is in the upper half
|
|
of the 1st status byte */
|
|
state_handler(card, buf[0] >> 4);
|
|
}
|
|
|
|
eof[fifon] = buf[0] & 1;
|
|
if (len > 2)
|
|
collect_rx_frame(fifo, buf + 2,
|
|
len - 2,
|
|
(len < maxlen) ? eof[fifon] : 0);
|
|
} else {
|
|
collect_rx_frame(fifo, buf, len,
|
|
(len <
|
|
maxlen) ? eof[fifon] :
|
|
0);
|
|
}
|
|
fifo->last_urblen = len;
|
|
}
|
|
|
|
fill_isoc_urb(urb, fifo->card->dev, fifo->pipe,
|
|
context_iso_urb->buffer, num_isoc_packets,
|
|
fifo->usb_packet_maxlen, fifo->intervall,
|
|
rx_iso_complete, urb->context);
|
|
errcode = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (errcode < 0) {
|
|
printk(KERN_INFO
|
|
"HFC-S USB: error submitting ISO URB: %d\n",
|
|
errcode);
|
|
}
|
|
} else {
|
|
if (status && !card->disc_flag) {
|
|
printk(KERN_INFO
|
|
"HFC-S USB: rx_iso_complete : "
|
|
"urb->status %d, fifonum %d\n",
|
|
status, fifon);
|
|
}
|
|
}
|
|
} /* rx_iso_complete */
|
|
|
|
|
|
/*********************************************************/
|
|
/* receive completion routine for all interrupt rx fifos */
|
|
/*********************************************************/
|
|
static void
|
|
rx_int_complete(struct urb *urb, struct pt_regs *regs)
|
|
{
|
|
int len;
|
|
int status;
|
|
__u8 *buf, maxlen, fifon;
|
|
usb_fifo *fifo = (usb_fifo *) urb->context;
|
|
hfcsusb_t *card = fifo->card;
|
|
static __u8 eof[8];
|
|
|
|
urb->dev = card->dev; /* security init */
|
|
|
|
fifon = fifo->fifonum;
|
|
if ((!fifo->active) || (urb->status)) {
|
|
printk(KERN_INFO
|
|
"HFC-S USB: RX-Fifo %i is going down (%i)\n", fifon,
|
|
urb->status);
|
|
|
|
fifo->urb->interval = 0; /* cancel automatic rescheduling */
|
|
return;
|
|
}
|
|
len = urb->actual_length;
|
|
buf = fifo->buffer;
|
|
maxlen = fifo->usb_packet_maxlen;
|
|
|
|
/*
|
|
USB data log for every INT in:
|
|
if (fifon == 1) {
|
|
printk ("fifon %d len %d: ", fifon, len);
|
|
for (i=0; i<len; i++) {
|
|
printk ("%x ", buf[i]);
|
|
}
|
|
printk ("\n");
|
|
}
|
|
*/
|
|
|
|
if (fifo->last_urblen != fifo->usb_packet_maxlen) {
|
|
/* the threshold mask is in the 2nd status byte */
|
|
card->threshold_mask = buf[1];
|
|
|
|
/* the S0 state is in the upper half of the 1st status byte */
|
|
state_handler(card, buf[0] >> 4);
|
|
|
|
eof[fifon] = buf[0] & 1;
|
|
/* if we have more than the 2 status bytes -> collect data */
|
|
if (len > 2)
|
|
collect_rx_frame(fifo, buf + 2,
|
|
urb->actual_length - 2,
|
|
(len < maxlen) ? eof[fifon] : 0);
|
|
} else {
|
|
collect_rx_frame(fifo, buf, urb->actual_length,
|
|
(len < maxlen) ? eof[fifon] : 0);
|
|
}
|
|
fifo->last_urblen = urb->actual_length;
|
|
|
|
status = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (status) {
|
|
printk(KERN_INFO
|
|
"HFC-S USB: error resubmitting URN at rx_int_complete...\n");
|
|
}
|
|
} /* rx_int_complete */
|
|
|
|
|
|
/***********************************/
|
|
/* check if new buffer for channel */
|
|
/* is waitinng is transmitt queue */
|
|
/***********************************/
|
|
int
|
|
next_tx_frame(hfcsusb_t * hw, __u8 channel)
|
|
{
|
|
int i;
|
|
channel_t *ch = &hw->chan[channel];
|
|
|
|
if (ch->tx_skb)
|
|
dev_kfree_skb(ch->tx_skb);
|
|
if (test_and_clear_bit(FLG_TX_NEXT, &ch->Flags)) {
|
|
ch->tx_skb = ch->next_skb;
|
|
if (ch->tx_skb) {
|
|
mISDN_head_t *hh = mISDN_HEAD_P(ch->tx_skb);
|
|
ch->next_skb = NULL;
|
|
test_and_clear_bit(FLG_TX_NEXT, &ch->Flags);
|
|
ch->tx_idx = 0;
|
|
|
|
/* channel data debug: */
|
|
if ((ch->debug) && (debug & DEBUG_HFC_FIFO)) {
|
|
mISDN_debugprint(&ch->inst,
|
|
"new TX channel(%i) len(%i): ",
|
|
ch->channel, ch->tx_skb->len);
|
|
i = 0;
|
|
printk(" ");
|
|
while (i < ch->tx_skb->len)
|
|
printk("%02x ", ch->tx_skb->data[i++]);
|
|
printk(" (TX_NEXT)\n");
|
|
}
|
|
|
|
queue_ch_frame(ch, CONFIRM, hh->dinfo, NULL);
|
|
return (1);
|
|
} else {
|
|
printk(KERN_WARNING
|
|
"%s channel(%i) TX_NEXT without skb\n",
|
|
ch->inst.name, channel);
|
|
test_and_clear_bit(FLG_TX_NEXT, &ch->Flags);
|
|
}
|
|
} else
|
|
ch->tx_skb = NULL;
|
|
test_and_clear_bit(FLG_TX_BUSY, &ch->Flags);
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*****************************************************/
|
|
/* transmit completion routine for all ISO tx fifos */
|
|
/*****************************************************/
|
|
static void
|
|
tx_iso_complete(struct urb *urb, struct pt_regs *regs)
|
|
{
|
|
iso_urb_struct *context_iso_urb = (iso_urb_struct *) urb->context;
|
|
usb_fifo *fifo = context_iso_urb->owner_fifo;
|
|
hfcsusb_t *card = fifo->card;
|
|
channel_t *ch = &card->chan[fifo->ch_idx];
|
|
int k, tx_offset, num_isoc_packets, sink, remain, current_len,
|
|
errcode;
|
|
int frame_complete, fifon, status;
|
|
__u8 threshbit;
|
|
__u8 threshtable[8] = { 1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80 };
|
|
|
|
fifon = fifo->fifonum;
|
|
status = urb->status;
|
|
|
|
tx_offset = 0;
|
|
|
|
if (fifo->active && !status) {
|
|
/* is FifoFull-threshold set for our channel? */
|
|
threshbit = threshtable[fifon] & card->threshold_mask;
|
|
num_isoc_packets = iso_packets[fifon];
|
|
|
|
/* predict dataflow to avoid fifo overflow */
|
|
if (fifon >= HFCUSB_D_TX) {
|
|
sink = (threshbit) ? SINK_DMIN : SINK_DMAX;
|
|
} else {
|
|
sink = (threshbit) ? SINK_MIN : SINK_MAX;
|
|
}
|
|
fill_isoc_urb(urb, fifo->card->dev, fifo->pipe,
|
|
context_iso_urb->buffer, num_isoc_packets,
|
|
fifo->usb_packet_maxlen, fifo->intervall,
|
|
tx_iso_complete, urb->context);
|
|
memset(context_iso_urb->buffer, 0,
|
|
sizeof(context_iso_urb->buffer));
|
|
frame_complete = 0;
|
|
|
|
/* Generate next Iso Packets */
|
|
for (k = 0; k < num_isoc_packets; ++k) {
|
|
if (ch->tx_skb) {
|
|
remain = ch->tx_skb->len - ch->tx_idx;
|
|
} else {
|
|
remain = 0;
|
|
}
|
|
if (remain>0) {
|
|
/* we lower data margin every msec */
|
|
fifo->bit_line -= sink;
|
|
current_len = (0 - fifo->bit_line) / 8;
|
|
|
|
/* maximum 15 byte for every ISO packet makes our life easier */
|
|
if (current_len > 14)
|
|
current_len = 14;
|
|
current_len = (remain <= current_len) ? remain : current_len;
|
|
|
|
/* how much bit do we put on the line? */
|
|
fifo->bit_line += current_len * 8;
|
|
|
|
context_iso_urb->buffer[tx_offset] = 0;
|
|
if (current_len == remain) {
|
|
if (test_bit(FLG_HDLC, &ch->Flags)) {
|
|
/* here frame completion */
|
|
context_iso_urb->buffer[tx_offset] = 1;
|
|
/* add 2 byte flags and 16bit CRC at end of ISDN frame */
|
|
fifo->bit_line += 32;
|
|
}
|
|
frame_complete = 1;
|
|
}
|
|
|
|
/* copy tx data to iso-urb buffer */
|
|
memcpy(context_iso_urb->buffer + tx_offset + 1,
|
|
(ch->tx_skb->data + ch->tx_idx), current_len);
|
|
ch->tx_idx += current_len;
|
|
|
|
/* define packet delimeters within the URB buffer */
|
|
urb->iso_frame_desc[k].offset = tx_offset;
|
|
urb->iso_frame_desc[k].length = current_len + 1;
|
|
|
|
tx_offset += (current_len + 1);
|
|
} else {
|
|
urb->iso_frame_desc[k].offset = tx_offset++;
|
|
|
|
urb->iso_frame_desc[k].length = 1;
|
|
fifo->bit_line -= sink; /* we lower data margin every msec */
|
|
|
|
if (fifo->bit_line < BITLINE_INF) {
|
|
fifo->bit_line = BITLINE_INF;
|
|
}
|
|
}
|
|
|
|
if (frame_complete)
|
|
next_tx_frame(card, fifo->ch_idx);
|
|
|
|
}
|
|
errcode = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (errcode < 0) {
|
|
printk(KERN_INFO
|
|
"HFC-S USB: error submitting ISO URB: %d \n",
|
|
errcode);
|
|
}
|
|
|
|
/*
|
|
abuse DChannel tx iso completion to trigger NT mode state changes
|
|
tx_iso_complete is assumed to be called every fifo->intervall ms
|
|
*/
|
|
if ((fifon == HFCUSB_D_TX) && (card->portmode & PORT_MODE_NT)
|
|
&& (card->portmode & NT_ACTIVATION_TIMER)) {
|
|
if ((--card->nt_timer) < 0)
|
|
S0_new_state(&card->chan[D]);
|
|
}
|
|
|
|
} else {
|
|
if (status && !card->disc_flag) {
|
|
printk(KERN_INFO
|
|
"HFC-S USB: tx_iso_complete : urb->status %s (%i), fifonum=%d\n",
|
|
symbolic(urb_errlist, status), status,
|
|
fifon);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* allocs urbs and start isoc transfer with two pending urbs to avoid
|
|
gaps in the transfer chain */
|
|
static int
|
|
start_isoc_chain(usb_fifo * fifo, int num_packets_per_urb,
|
|
usb_complete_t complete, int packet_size)
|
|
{
|
|
int i, k, errcode;
|
|
|
|
printk(KERN_INFO "HFC-S USB: starting ISO-chain for Fifo %i\n",
|
|
fifo->fifonum);
|
|
|
|
/* allocate Memory for Iso out Urbs */
|
|
for (i = 0; i < 2; i++) {
|
|
if (!(fifo->iso[i].purb)) {
|
|
fifo->iso[i].purb =
|
|
usb_alloc_urb(num_packets_per_urb, GFP_KERNEL);
|
|
if (!(fifo->iso[i].purb)) {
|
|
printk(KERN_INFO
|
|
"alloc urb for fifo %i failed!!!",
|
|
fifo->fifonum);
|
|
}
|
|
fifo->iso[i].owner_fifo = (struct usb_fifo *) fifo;
|
|
|
|
/* Init the first iso */
|
|
if (ISO_BUFFER_SIZE >=
|
|
(fifo->usb_packet_maxlen *
|
|
num_packets_per_urb)) {
|
|
fill_isoc_urb(fifo->iso[i].purb,
|
|
fifo->card->dev, fifo->pipe,
|
|
fifo->iso[i].buffer,
|
|
num_packets_per_urb,
|
|
fifo->usb_packet_maxlen,
|
|
fifo->intervall, complete,
|
|
&fifo->iso[i]);
|
|
memset(fifo->iso[i].buffer, 0,
|
|
sizeof(fifo->iso[i].buffer));
|
|
/* defining packet delimeters in fifo->buffer */
|
|
for (k = 0; k < num_packets_per_urb; k++) {
|
|
fifo->iso[i].purb->
|
|
iso_frame_desc[k].offset =
|
|
k * packet_size;
|
|
fifo->iso[i].purb->
|
|
iso_frame_desc[k].length =
|
|
packet_size;
|
|
}
|
|
} else {
|
|
printk(KERN_INFO
|
|
"HFC-S USB: ISO Buffer size to small!\n");
|
|
}
|
|
}
|
|
fifo->bit_line = BITLINE_INF;
|
|
|
|
errcode = usb_submit_urb(fifo->iso[i].purb, GFP_KERNEL);
|
|
fifo->active = (errcode >= 0) ? 1 : 0;
|
|
if (errcode < 0) {
|
|
printk(KERN_INFO "HFC-S USB: %s URB nr:%d\n",
|
|
symbolic(urb_errlist, errcode), i);
|
|
};
|
|
}
|
|
return (fifo->active);
|
|
}
|
|
|
|
/* stops running iso chain and frees their pending urbs */
|
|
static void
|
|
stop_isoc_chain(usb_fifo * fifo)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
if (fifo->iso[i].purb) {
|
|
printk(KERN_INFO
|
|
"HFC-S USB: %s for fifo %i.%i\n",
|
|
__FUNCTION__, fifo->fifonum, i);
|
|
usb_kill_urb(fifo->iso[i].purb);
|
|
usb_free_urb(fifo->iso[i].purb);
|
|
fifo->iso[i].purb = NULL;
|
|
}
|
|
}
|
|
if (fifo->urb) {
|
|
usb_kill_urb(fifo->urb);
|
|
usb_free_urb(fifo->urb);
|
|
fifo->urb = NULL;
|
|
}
|
|
fifo->active = 0;
|
|
}
|
|
|
|
/***************************************************/
|
|
/* start the interrupt transfer for the given fifo */
|
|
/***************************************************/
|
|
static void
|
|
start_int_fifo(usb_fifo * fifo)
|
|
{
|
|
int errcode;
|
|
|
|
printk(KERN_INFO "HFC-S USB: starting intr IN fifo:%d\n",
|
|
fifo->fifonum);
|
|
|
|
if (!fifo->urb) {
|
|
fifo->urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!fifo->urb)
|
|
return;
|
|
}
|
|
usb_fill_int_urb(fifo->urb, fifo->card->dev, fifo->pipe,
|
|
fifo->buffer, fifo->usb_packet_maxlen,
|
|
rx_int_complete, fifo, fifo->intervall);
|
|
fifo->active = 1; /* must be marked active */
|
|
errcode = usb_submit_urb(fifo->urb, GFP_KERNEL);
|
|
if (errcode) {
|
|
printk(KERN_INFO
|
|
"HFC-S USB: submit URB error(start_int_info): status:%i\n",
|
|
errcode);
|
|
fifo->active = 0;
|
|
}
|
|
}
|
|
|
|
/* Hardware Initialization */
|
|
int
|
|
setup_hfcsusb(hfcsusb_t * card)
|
|
{
|
|
usb_fifo *fifo;
|
|
int i, err;
|
|
u_char b;
|
|
|
|
/* check the chip id */
|
|
if (read_usb(card, HFCUSB_CHIP_ID, &b) != 1) {
|
|
printk(KERN_INFO "HFC-USB: cannot read chip id\n");
|
|
return (1);
|
|
}
|
|
if (b != HFCUSB_CHIPID) {
|
|
printk(KERN_INFO "HFC-S USB: Invalid chip id 0x%02x\n", b);
|
|
return (1);
|
|
}
|
|
|
|
/* first set the needed config, interface and alternate */
|
|
err = usb_set_interface(card->dev, card->if_used, card->alt_used);
|
|
|
|
/* do Chip reset */
|
|
write_usb(card, HFCUSB_CIRM, 8);
|
|
/* aux = output, reset off */
|
|
write_usb(card, HFCUSB_CIRM, 0x10);
|
|
|
|
/* set USB_SIZE to match the the wMaxPacketSize for INT or BULK transfers */
|
|
write_usb(card, HFCUSB_USB_SIZE,
|
|
(card->packet_size /
|
|
8) | ((card->packet_size / 8) << 4));
|
|
|
|
/* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
|
|
write_usb(card, HFCUSB_USB_SIZE_I, card->iso_packet_size);
|
|
|
|
/* enable PCM/GCI master mode */
|
|
write_usb(card, HFCUSB_MST_MODE1, 0); /* set default values */
|
|
write_usb(card, HFCUSB_MST_MODE0, 1); /* enable master mode */
|
|
|
|
/* init the fifos */
|
|
write_usb(card, HFCUSB_F_THRES,
|
|
(HFCUSB_TX_THRESHOLD /
|
|
8) | ((HFCUSB_RX_THRESHOLD / 8) << 4));
|
|
|
|
fifo = card->fifos;
|
|
for (i = 0; i < HFCUSB_NUM_FIFOS; i++) {
|
|
write_usb(card, HFCUSB_FIFO, i); /* select the desired fifo */
|
|
fifo[i].max_size =
|
|
(i <= HFCUSB_B2_RX) ? MAX_BCH_SIZE : MAX_DFRAME_LEN;
|
|
fifo[i].last_urblen = 0;
|
|
|
|
/* set 2 bit for D- & E-channel */
|
|
write_usb(card, HFCUSB_HDLC_PAR,
|
|
((i <= HFCUSB_B2_RX) ? 0 : 2));
|
|
|
|
/* enable all fifos */
|
|
if (i == HFCUSB_D_TX) {
|
|
// enable Interframe Fill for DChannel TX in TE Mode
|
|
write_usb(card, HFCUSB_CON_HDLC, (card->portmode & PORT_MODE_NT) ? 0x08 : 0x09);
|
|
// write_usb(card, HFCUSB_CON_HDLC, 0x08);
|
|
} else {
|
|
write_usb(card, HFCUSB_CON_HDLC, 0x08);
|
|
}
|
|
|
|
write_usb(card, HFCUSB_INC_RES_F, 2); /* reset the fifo */
|
|
}
|
|
|
|
if (card->portmode & PORT_MODE_NT) {
|
|
write_usb(card, HFCUSB_SCTRL, 0x44); /* disable B transmitters + capacitive mode, enable NT mode */
|
|
write_usb(card, HFCUSB_SCTRL_E, 0x09);
|
|
write_usb(card, HFCUSB_CLKDEL, CLKDEL_NT); /* clock delay value */
|
|
write_usb(card, HFCUSB_STATES, 1 | 0x10); /* set deactivated mode */
|
|
write_usb(card, HFCUSB_STATES, 1); /* enable state machine */
|
|
} else {
|
|
write_usb(card, HFCUSB_SCTRL, 0x40); /* disable B transmitters + capacitive mode, enable TE mode */
|
|
write_usb(card, HFCUSB_SCTRL_E, 0x00);
|
|
write_usb(card, HFCUSB_CLKDEL, CLKDEL_TE); /* clock delay value */
|
|
write_usb(card, HFCUSB_STATES, 3 | 0x10); /* set deactivated mode */
|
|
write_usb(card, HFCUSB_STATES, 3); /* enable state machine */
|
|
}
|
|
|
|
write_usb(card, HFCUSB_SCTRL_R, 0); /* disable both B receivers */
|
|
|
|
card->disc_flag = 0;
|
|
card->led_state = 0;
|
|
card->old_led_state = 0;
|
|
|
|
/* init the background machinery for control requests */
|
|
card->ctrl_read.bRequestType = 0xc0;
|
|
card->ctrl_read.bRequest = 1;
|
|
card->ctrl_read.wLength = cpu_to_le16(1);
|
|
card->ctrl_write.bRequestType = 0x40;
|
|
card->ctrl_write.bRequest = 0;
|
|
card->ctrl_write.wLength = 0;
|
|
usb_fill_control_urb(card->ctrl_urb,
|
|
card->dev,
|
|
card->ctrl_out_pipe,
|
|
(u_char *) & card->ctrl_write,
|
|
NULL, 0, ctrl_complete, card);
|
|
|
|
/* Init All Fifos */
|
|
for (i = 0; i < HFCUSB_NUM_FIFOS; i++) {
|
|
card->fifos[i].iso[0].purb = NULL;
|
|
card->fifos[i].iso[1].purb = NULL;
|
|
card->fifos[i].active = 0;
|
|
}
|
|
|
|
/* 3 (+1) INT IN + 3 ISO OUT */
|
|
if (card->cfg_used == CNF_3INT3ISO
|
|
|| card->cfg_used == CNF_4INT3ISO) {
|
|
|
|
start_int_fifo(card->fifos + HFCUSB_D_RX);
|
|
/*
|
|
if (card->fifos[HFCUSB_PCM_RX].pipe)
|
|
start_int_fifo(card->fifos + HFCUSB_PCM_RX);
|
|
*/
|
|
|
|
start_int_fifo(card->fifos + HFCUSB_B1_RX);
|
|
start_int_fifo(card->fifos + HFCUSB_B2_RX);
|
|
}
|
|
|
|
/* 3 (+1) ISO IN + 3 ISO OUT */
|
|
if (card->cfg_used == CNF_3ISO3ISO
|
|
|| card->cfg_used == CNF_4ISO3ISO) {
|
|
start_isoc_chain(card->fifos + HFCUSB_D_RX, ISOC_PACKETS_D,
|
|
rx_iso_complete, 16);
|
|
|
|
/*
|
|
if (card->fifos[HFCUSB_PCM_RX].pipe)
|
|
start_isoc_chain(card->fifos + HFCUSB_PCM_RX,
|
|
ISOC_PACKETS_D, rx_iso_complete,
|
|
16);
|
|
*/
|
|
start_isoc_chain(card->fifos + HFCUSB_B1_RX,
|
|
ISOC_PACKETS_B, rx_iso_complete, 16);
|
|
|
|
start_isoc_chain(card->fifos + HFCUSB_B2_RX,
|
|
ISOC_PACKETS_B, rx_iso_complete, 16);
|
|
}
|
|
|
|
|
|
start_isoc_chain(card->fifos + HFCUSB_D_TX, ISOC_PACKETS_D,
|
|
tx_iso_complete, 1);
|
|
start_isoc_chain(card->fifos + HFCUSB_B1_TX, ISOC_PACKETS_B,
|
|
tx_iso_complete, 1);
|
|
start_isoc_chain(card->fifos + HFCUSB_B2_TX, ISOC_PACKETS_B,
|
|
tx_iso_complete, 1);
|
|
|
|
handle_led(card, LED_POWER_ON);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
release_card(hfcsusb_t * card)
|
|
{
|
|
int i;
|
|
u_long flags;
|
|
|
|
if (debug & 0x10000)
|
|
printk(KERN_DEBUG "%s\n", __FUNCTION__);
|
|
|
|
setup_bchannel(&card->chan[B1], ISDN_PID_NONE);
|
|
setup_bchannel(&card->chan[B2], ISDN_PID_NONE);
|
|
mISDN_freechannel(&card->chan[B1]);
|
|
mISDN_freechannel(&card->chan[B2]);
|
|
mISDN_freechannel(&card->chan[D]);
|
|
mISDN_ctrl(&card->chan[D].inst, MGR_UNREGLAYER | REQUEST, NULL);
|
|
|
|
spin_lock_irqsave(&hw_mISDNObj.lock, flags);
|
|
list_del(&card->list);
|
|
spin_unlock_irqrestore(&hw_mISDNObj.lock, flags);
|
|
schedule_timeout((80 * HZ) / 1000); /* Timeout 80ms */
|
|
|
|
/* tell all fifos to terminate */
|
|
for (i = 0; i < HFCUSB_NUM_FIFOS; i++) {
|
|
if (card->fifos[i].usb_transfer_mode == USB_ISOC) {
|
|
if (card->fifos[i].active > 0) {
|
|
stop_isoc_chain(&card->fifos[i]);
|
|
}
|
|
} else {
|
|
if (card->fifos[i].active > 0) {
|
|
card->fifos[i].active = 0;
|
|
}
|
|
if (card->fifos[i].urb) {
|
|
usb_kill_urb(card->fifos[i].urb);
|
|
usb_free_urb(card->fifos[i].urb);
|
|
card->fifos[i].urb = NULL;
|
|
}
|
|
}
|
|
card->fifos[i].active = 0;
|
|
}
|
|
|
|
/* wait for all URBS to terminate */
|
|
if (card->ctrl_urb) {
|
|
usb_kill_urb(card->ctrl_urb);
|
|
usb_free_urb(card->ctrl_urb);
|
|
card->ctrl_urb = NULL;
|
|
}
|
|
hfcsusb_cnt--;
|
|
if (card->intf)
|
|
usb_set_intfdata(card->intf, NULL);
|
|
kfree(card);
|
|
}
|
|
|
|
static int
|
|
setup_instance(hfcsusb_t * card)
|
|
{
|
|
int i, err;
|
|
mISDN_pid_t pid;
|
|
u_long flags;
|
|
|
|
spin_lock_irqsave(&hw_mISDNObj.lock, flags);
|
|
|
|
list_add_tail(&card->list, &hw_mISDNObj.ilist);
|
|
spin_unlock_irqrestore(&hw_mISDNObj.lock, flags);
|
|
card->chan[D].debug = debug;
|
|
|
|
spin_lock_init(&card->ctrl_lock);
|
|
spin_lock_init(&card->lock);
|
|
|
|
/* link card->fifos[] to card->chan[] */
|
|
card->fifos[HFCUSB_D_RX].ch_idx = D;
|
|
card->fifos[HFCUSB_D_TX].ch_idx = D;
|
|
card->fifos[HFCUSB_B1_RX].ch_idx = B1;
|
|
card->fifos[HFCUSB_B1_TX].ch_idx = B1;
|
|
card->fifos[HFCUSB_B2_RX].ch_idx = B2;
|
|
card->fifos[HFCUSB_B2_TX].ch_idx = B2;
|
|
card->fifos[HFCUSB_PCM_RX].ch_idx = PCM;
|
|
card->fifos[HFCUSB_PCM_TX].ch_idx = PCM;
|
|
|
|
card->chan[D].channel = D;
|
|
card->chan[D].state = 0;
|
|
card->chan[D].inst.hwlock = &card->lock;
|
|
card->chan[D].inst.pid.layermask = ISDN_LAYER(0);
|
|
card->chan[D].inst.pid.protocol[0] = ISDN_PID_L0_TE_S0;
|
|
card->chan[D].inst.class_dev.dev = &card->dev->dev;
|
|
mISDN_init_instance(&card->chan[D].inst, &hw_mISDNObj, card, hfcsusb_l2l1);
|
|
sprintf(card->chan[D].inst.name, "hfcsusb_%d", hfcsusb_cnt + 1);
|
|
mISDN_set_dchannel_pid(&pid, protocol[hfcsusb_cnt], layermask[hfcsusb_cnt]);
|
|
mISDN_initchannel(&card->chan[D], MSK_INIT_DCHANNEL, MAX_DFRAME_LEN_L1);
|
|
card->chan[D].hw = card;
|
|
card->portmode = 0;
|
|
|
|
for (i = B1; i <= B2; i++) {
|
|
card->chan[i].channel = i;
|
|
mISDN_init_instance(&card->chan[i].inst, &hw_mISDNObj, card, hfcsusb_l2l1);
|
|
card->chan[i].inst.pid.layermask = ISDN_LAYER(0);
|
|
card->chan[i].inst.hwlock = &card->lock;
|
|
card->chan[i].inst.class_dev.dev = &card->dev->dev;
|
|
card->chan[i].debug = debug;
|
|
sprintf(card->chan[i].inst.name, "%s B%d",
|
|
card->chan[D].inst.name, i + 1);
|
|
mISDN_initchannel(&card->chan[i], MSK_INIT_BCHANNEL, MAX_DATA_MEM);
|
|
card->chan[i].hw = card;
|
|
#ifdef FIXME
|
|
if (card->chan[i].dev) {
|
|
card->chan[i].dev->wport.pif.func = hfcsusb_l2l1;
|
|
card->chan[i].dev->wport.pif.fdata = &card->chan[i];
|
|
}
|
|
#endif
|
|
}
|
|
|
|
card->chan[PCM].channel = PCM;
|
|
|
|
if (protocol[hfcsusb_cnt] & 0x10) {
|
|
// NT Mode
|
|
printk (KERN_INFO "%s wants NT Mode\n", card->chan[D].inst.name);
|
|
card->chan[D].inst.pid.protocol[0] = ISDN_PID_L0_NT_S0;
|
|
card->chan[D].inst.pid.protocol[1] = ISDN_PID_L1_NT_S0;
|
|
pid.protocol[0] = ISDN_PID_L0_NT_S0;
|
|
pid.protocol[1] = ISDN_PID_L1_NT_S0;
|
|
card->chan[D].inst.pid.layermask |= ISDN_LAYER(1);
|
|
pid.layermask |= ISDN_LAYER(1);
|
|
if (layermask[i] & ISDN_LAYER(2))
|
|
pid.protocol[2] = ISDN_PID_L2_LAPD_NET;
|
|
/* select NT mode with activated NT Timer (T1) */
|
|
card->portmode |= (PORT_MODE_NT | NT_ACTIVATION_TIMER);
|
|
} else {
|
|
printk (KERN_INFO "%s wants TE Mode\n", card->chan[D].inst.name);
|
|
// TE Mode
|
|
card->chan[D].inst.pid.protocol[0] = ISDN_PID_L0_TE_S0;
|
|
card->portmode |= PORT_MODE_TE;
|
|
}
|
|
|
|
if (debug)
|
|
printk(KERN_DEBUG
|
|
"hfcsusb card %p dch %p bch1 %p bch2 %p\n", card,
|
|
&card->chan[D], &card->chan[B1], &card->chan[B2]);
|
|
|
|
err = setup_hfcsusb(card);
|
|
if (err) {
|
|
mISDN_freechannel(&card->chan[D]);
|
|
mISDN_freechannel(&card->chan[B2]);
|
|
mISDN_freechannel(&card->chan[B1]);
|
|
spin_lock_irqsave(&hw_mISDNObj.lock, flags);
|
|
list_del(&card->list);
|
|
spin_unlock_irqrestore(&hw_mISDNObj.lock, flags);
|
|
kfree(card);
|
|
return (err);
|
|
}
|
|
hfcsusb_cnt++;
|
|
err = mISDN_ctrl(NULL, MGR_NEWSTACK | REQUEST, &card->chan[D].inst);
|
|
if (err) {
|
|
release_card(card);
|
|
return (err);
|
|
}
|
|
for (i = B1; i <= B2; i++) {
|
|
err = mISDN_ctrl(card->chan[D].inst.st,
|
|
MGR_NEWSTACK | REQUEST, &card->chan[i].inst);
|
|
if (err) {
|
|
printk(KERN_ERR "MGR_ADDSTACK bchan error %d\n", err);
|
|
mISDN_ctrl(card->chan[D].inst.st, MGR_DELSTACK | REQUEST, NULL);
|
|
return (err);
|
|
}
|
|
setup_bchannel(&card->chan[i], -1);
|
|
}
|
|
if (debug)
|
|
printk(KERN_DEBUG "%s lm %x\n", __FUNCTION__, pid.layermask);
|
|
err = mISDN_ctrl(card->chan[D].inst.st, MGR_SETSTACK | REQUEST, &pid);
|
|
if (err) {
|
|
printk(KERN_ERR "MGR_SETSTACK REQUEST dch err(%d)\n", err);
|
|
mISDN_ctrl(card->chan[D].inst.st, MGR_DELSTACK | REQUEST, NULL);
|
|
return (err);
|
|
}
|
|
|
|
mISDN_ctrl(card->chan[D].inst.st, MGR_CTRLREADY | INDICATION, NULL);
|
|
usb_set_intfdata(card->intf, card);
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*************************************************/
|
|
/* function called to probe a new plugged device */
|
|
/*************************************************/
|
|
|
|
static int
|
|
hfcsusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *dev = interface_to_usbdev(intf);
|
|
hfcsusb_t *card;
|
|
struct usb_host_interface *iface = intf->cur_altsetting;
|
|
struct usb_host_interface *iface_used = NULL;
|
|
struct usb_host_endpoint *ep;
|
|
int ifnum = iface->desc.bInterfaceNumber;
|
|
int i, idx, alt_idx, probe_alt_setting, vend_idx, cfg_used, *vcf,
|
|
attr, cfg_found, ep_addr;
|
|
int cmptbl[16], small_match, iso_packet_size, packet_size, alt_used = 0;
|
|
hfcsusb_vdata *driver_info;
|
|
|
|
vend_idx = 0xffff;
|
|
for (i = 0; hfcsusb_idtab[i].idVendor; i++) {
|
|
if ((le16_to_cpu(dev->descriptor.idVendor) == hfcsusb_idtab[i].idVendor)
|
|
&& (le16_to_cpu(dev->descriptor.idProduct) == hfcsusb_idtab[i].idProduct)) {
|
|
vend_idx = i;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
printk(KERN_INFO
|
|
"HFC-S USB: probing interface(%d) actalt(%d) minor(%d) vend_idx(%d)\n",
|
|
ifnum, iface->desc.bAlternateSetting, intf->minor, vend_idx);
|
|
|
|
if (vend_idx == 0xffff) {
|
|
printk(KERN_WARNING
|
|
"HFC-S USB: no valid vendor found in USB descriptor\n");
|
|
return (-EIO);
|
|
}
|
|
/* if vendor and product ID is OK, start probing alternate settings */
|
|
alt_idx = 0;
|
|
small_match = 0xffff;
|
|
|
|
/* default settings */
|
|
iso_packet_size = 16;
|
|
packet_size = 64;
|
|
|
|
while (alt_idx < intf->num_altsetting) {
|
|
iface = intf->altsetting + alt_idx;
|
|
probe_alt_setting = iface->desc.bAlternateSetting;
|
|
cfg_used = 0;
|
|
|
|
/* check for config EOL element */
|
|
while (validconf[cfg_used][0]) {
|
|
cfg_found = 1;
|
|
vcf = validconf[cfg_used];
|
|
/* first endpoint descriptor */
|
|
ep = iface->endpoint;
|
|
memcpy(cmptbl, vcf, 16 * sizeof(int));
|
|
|
|
/* check for all endpoints in this alternate setting */
|
|
for (i = 0; i < iface->desc.bNumEndpoints; i++) {
|
|
ep_addr = ep->desc.bEndpointAddress;
|
|
/* get endpoint base */
|
|
idx = ((ep_addr & 0x7f) - 1) * 2;
|
|
if (ep_addr & 0x80)
|
|
idx++;
|
|
attr = ep->desc.bmAttributes;
|
|
if (cmptbl[idx] == EP_NUL) {
|
|
cfg_found = 0;
|
|
}
|
|
if (attr == USB_ENDPOINT_XFER_INT
|
|
&& cmptbl[idx] == EP_INT)
|
|
cmptbl[idx] = EP_NUL;
|
|
if (attr == USB_ENDPOINT_XFER_BULK
|
|
&& cmptbl[idx] == EP_BLK)
|
|
cmptbl[idx] = EP_NUL;
|
|
if (attr == USB_ENDPOINT_XFER_ISOC
|
|
&& cmptbl[idx] == EP_ISO)
|
|
cmptbl[idx] = EP_NUL;
|
|
|
|
/* check if all INT endpoints match minimum interval */
|
|
if (attr == USB_ENDPOINT_XFER_INT &&
|
|
ep->desc.bInterval < vcf[17]) {
|
|
cfg_found = 0;
|
|
}
|
|
ep++;
|
|
}
|
|
for (i = 0; i < 16; i++) {
|
|
/* all entries must be EP_NOP or EP_NUL for a valid config */
|
|
if (cmptbl[i] != EP_NOP && cmptbl[i] != EP_NUL)
|
|
cfg_found = 0;
|
|
}
|
|
if (cfg_found) {
|
|
if (cfg_used < small_match) {
|
|
small_match = cfg_used;
|
|
alt_used = probe_alt_setting;
|
|
iface_used = iface;
|
|
}
|
|
}
|
|
cfg_used++;
|
|
}
|
|
alt_idx++;
|
|
} /* (alt_idx < intf->num_altsetting) */
|
|
|
|
/* not found a valid USB Ta Endpoint config */
|
|
if (small_match == 0xffff) {
|
|
printk(KERN_WARNING
|
|
"HFC-S USB: no valid endpoint found in USB descriptor\n");
|
|
return (-EIO);
|
|
}
|
|
iface = iface_used;
|
|
card = kmalloc(sizeof(hfcsusb_t), GFP_KERNEL);
|
|
if (!card)
|
|
return (-ENOMEM); /* got no mem */
|
|
memset(card, 0, sizeof(hfcsusb_t));
|
|
|
|
ep = iface->endpoint;
|
|
vcf = validconf[small_match];
|
|
|
|
for (i = 0; i < iface->desc.bNumEndpoints; i++) {
|
|
usb_fifo *f;
|
|
|
|
ep_addr = ep->desc.bEndpointAddress;
|
|
/* get endpoint base */
|
|
idx = ((ep_addr & 0x7f) - 1) * 2;
|
|
if (ep_addr & 0x80)
|
|
idx++;
|
|
f = &card->fifos[idx & 7];
|
|
|
|
/* init Endpoints */
|
|
if (vcf[idx] == EP_NOP || vcf[idx] == EP_NUL) {
|
|
ep++;
|
|
continue;
|
|
}
|
|
switch (ep->desc.bmAttributes) {
|
|
case USB_ENDPOINT_XFER_INT:
|
|
f->pipe = usb_rcvintpipe(dev,
|
|
ep->desc.bEndpointAddress);
|
|
f->usb_transfer_mode = USB_INT;
|
|
packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
|
|
break;
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
if (ep_addr & 0x80)
|
|
f->pipe = usb_rcvbulkpipe(dev,
|
|
ep->desc.bEndpointAddress);
|
|
else
|
|
f->pipe = usb_sndbulkpipe(dev,
|
|
ep->desc.bEndpointAddress);
|
|
f->usb_transfer_mode = USB_BULK;
|
|
packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
|
|
break;
|
|
case USB_ENDPOINT_XFER_ISOC:
|
|
if (ep_addr & 0x80)
|
|
f->pipe = usb_rcvisocpipe(dev,
|
|
ep->desc.bEndpointAddress);
|
|
else
|
|
f->pipe = usb_sndisocpipe(dev,
|
|
ep->desc.bEndpointAddress);
|
|
f->usb_transfer_mode = USB_ISOC;
|
|
iso_packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
|
|
break;
|
|
default:
|
|
f->pipe = 0;
|
|
} /* switch attribute */
|
|
|
|
if (f->pipe) {
|
|
f->fifonum = idx & 7;
|
|
f->card = card;
|
|
f->usb_packet_maxlen = le16_to_cpu(ep->desc.wMaxPacketSize);
|
|
f->intervall = ep->desc.bInterval;
|
|
}
|
|
ep++;
|
|
}
|
|
card->dev = dev; /* save device */
|
|
card->if_used = ifnum; /* save used interface */
|
|
card->alt_used = alt_used; /* and alternate config */
|
|
card->ctrl_paksize = dev->descriptor.bMaxPacketSize0; /* control size */
|
|
card->cfg_used = vcf[16]; /* store used config */
|
|
card->vend_idx = vend_idx; /* store found vendor */
|
|
card->packet_size = packet_size;
|
|
card->iso_packet_size = iso_packet_size;
|
|
|
|
/* create the control pipes needed for register access */
|
|
card->ctrl_in_pipe = usb_rcvctrlpipe(card->dev, 0);
|
|
card->ctrl_out_pipe = usb_sndctrlpipe(card->dev, 0);
|
|
card->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
|
|
driver_info = (hfcsusb_vdata *) hfcsusb_idtab[vend_idx].driver_info;
|
|
printk(KERN_INFO "HFC-S USB: detected \"%s\"\n",
|
|
driver_info->vend_name);
|
|
printk(KERN_INFO "HFC-S USB: Endpoint-Config: %s (if=%d alt=%d)\n",
|
|
conf_str[small_match], ifnum, alt_used);
|
|
|
|
card->intf = intf;
|
|
if (setup_instance(card)) {
|
|
return (-EIO);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/****************************************************/
|
|
/* function called when an active device is removed */
|
|
/****************************************************/
|
|
static void
|
|
hfcsusb_disconnect(struct usb_interface *intf)
|
|
{
|
|
hfcsusb_t *card = usb_get_intfdata(intf);
|
|
|
|
printk(KERN_INFO "HFC-S USB: device disconnect\n");
|
|
if (!card) {
|
|
if (debug & 0x10000)
|
|
printk(KERN_DEBUG "%s : NO CONTEXT!\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
if (debug & 0x10000)
|
|
printk(KERN_DEBUG "%s\n", __FUNCTION__);
|
|
card->disc_flag = 1;
|
|
mISDN_ctrl(card->chan[D].inst.st, MGR_DELSTACK | REQUEST, NULL);
|
|
// release_card(card);
|
|
usb_set_intfdata(intf, NULL);
|
|
} /* hfcsusb_disconnect */
|
|
|
|
|
|
/************************************/
|
|
/* our driver information structure */
|
|
/************************************/
|
|
static struct usb_driver hfcsusb_drv = {
|
|
.name = DRIVER_NAME,
|
|
.id_table = hfcsusb_idtab,
|
|
.probe = hfcsusb_probe,
|
|
.disconnect = hfcsusb_disconnect,
|
|
};
|
|
|
|
|
|
static int __init
|
|
hfcsusb_init(void)
|
|
{
|
|
int err;
|
|
|
|
// debug = 0xFFFF;
|
|
printk(KERN_INFO "hfcsusb driver Rev. %s (debug=%i)\n",
|
|
mISDN_getrev(hfcsusb_rev), debug);
|
|
|
|
#ifdef MODULE
|
|
hw_mISDNObj.owner = THIS_MODULE;
|
|
#endif
|
|
spin_lock_init(&hw_mISDNObj.lock);
|
|
INIT_LIST_HEAD(&hw_mISDNObj.ilist);
|
|
hw_mISDNObj.name = DRIVER_NAME;
|
|
hw_mISDNObj.own_ctrl = hfcsusb_manager;
|
|
|
|
hw_mISDNObj.DPROTO.protocol[0] = ISDN_PID_L0_TE_S0 |
|
|
ISDN_PID_L0_NT_S0;
|
|
hw_mISDNObj.DPROTO.protocol[1] = ISDN_PID_L1_NT_S0;
|
|
hw_mISDNObj.BPROTO.protocol[1] = ISDN_PID_L1_B_64TRANS |
|
|
ISDN_PID_L1_B_64HDLC;
|
|
hw_mISDNObj.BPROTO.protocol[2] = ISDN_PID_L2_B_TRANS |
|
|
ISDN_PID_L2_B_RAWDEV;
|
|
|
|
if ((err = mISDN_register(&hw_mISDNObj))) {
|
|
printk(KERN_ERR "Can't register hfcsusb error(%d)\n", err);
|
|
return (err);
|
|
}
|
|
if (usb_register(&hfcsusb_drv)) {
|
|
printk(KERN_INFO
|
|
"hfcsusb: Unable to register hfcsusb module at usb stack\n");
|
|
goto out;
|
|
}
|
|
return 0;
|
|
|
|
out:
|
|
mISDN_unregister(&hw_mISDNObj);
|
|
return err;
|
|
}
|
|
|
|
static void __exit
|
|
hfcsusb_cleanup(void)
|
|
{
|
|
int err;
|
|
hfcsusb_t *card, *next;
|
|
|
|
if (debug & 0x10000)
|
|
printk(KERN_DEBUG "%s\n", __FUNCTION__);
|
|
|
|
list_for_each_entry_safe(card, next, &hw_mISDNObj.ilist, list) {
|
|
handle_led(card, LED_POWER_OFF);
|
|
}
|
|
if ((err = mISDN_unregister(&hw_mISDNObj))) {
|
|
printk(KERN_ERR "Can't unregister hfcsusb error(%d)\n",
|
|
err);
|
|
}
|
|
/* unregister Hardware */
|
|
usb_deregister(&hfcsusb_drv); /* release our driver */
|
|
}
|
|
|
|
module_init(hfcsusb_init);
|
|
module_exit(hfcsusb_cleanup);
|