56 lines
2.4 KiB
Plaintext
56 lines
2.4 KiB
Plaintext
misdn-init: init-script to auto-configure and load the mISDN kernel drivers
|
|
===========================================================================
|
|
|
|
This script makes it easy to configure and activate mISDN compatible
|
|
adapter cards. It scans an eyecandy config file named misdn-init.conf
|
|
for your card and port settings, then it loads the driver modules properly.
|
|
The misdn-init.conf can also be autogenerated by the misdn-init script.
|
|
|
|
---------------------------------------------------------------------------
|
|
Usage: /etc/init.d/misdn-init start|stop|restart|config|scan|help
|
|
|
|
--start scan /etc/misdn-init.conf and load the mISDN drivers
|
|
--stop unload the mISDN drivers
|
|
--restart see stop, then start
|
|
--config scan your PCI bus for mISDN compatible hardware and generate
|
|
a /etc/misdn-init.conf
|
|
--scan scan your PCI bus for mISDN compatible hardware and print
|
|
the results to the console
|
|
--help print the usage info
|
|
---------------------------------------------------------------------------
|
|
|
|
|
|
* Here is a quick overview on how to use misdn-init:
|
|
|
|
1) Get and install misdn-init:
|
|
$ wget http://www.beronet.com/downloads/chan_misdn/stable/chan_misdn.tar.gz
|
|
$ tar zxf chan_misdn.tar.gz
|
|
$ (as root) cp chan_misdn/misdn-init /etc/init.d/misdn-init
|
|
|
|
2) Let misdn-init scan your PCI bus for mISDN compatible hardware and write
|
|
the results into /etc/misdn-init.conf:
|
|
$ (as root) /etc/init.d/misdn-init config
|
|
|
|
3) (optional) Edit /etc/misdn-init.conf and set everything the way you want it.
|
|
This file is heavily commented, hence it should be self-explaining.
|
|
|
|
4) (optional, but recommended) Add misdn-init to your run level.
|
|
This is distribution dependend. Here an example for a debian system:
|
|
ATTENTION: If you have services in your runlevels that depend
|
|
on mISDN, make sure that misdn-init starts before, and
|
|
stops after them (this is done by changing the values
|
|
that are set to 60 in this example, more info: read the
|
|
manpage for update-rc.d).
|
|
$ (as root) update-rc.d misdn-init start 60 2 3 4 5 . stop 60 0 1 6 .
|
|
|
|
5) Run the following to start mISDN:
|
|
$ (as root) /etc/init.d/misdn-init start
|
|
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
* Report Bugs:
|
|
If you experience any bugs or have a feature request, please visit:
|
|
www.isdn4linux.de/mantis
|
|
|