* fixed minor debugging issue in dsp_cancel.c (too much output over serial
line creates Kernel Oops..) * driver/isdn/hardware/mISDN/Makefile is now the 2.6 one (i don't know if mISDN works with 2.4 anymore ..) * added misdn-init and README.misdn-init: make install will install misdn-init in /etc/init.d/ This will load all the necessary drivers and pass useful options to them. It is very easy to configure the Modes for a port now, just by editing: /etc/misdn-init.conf now. There are 6 Modes at the moment: te_ptp,te_ptmp,te_capi_ptp,te_capi_ptmp,nt_ptp,nt_ptmp Also the possible extra options like timing and hw-dtmf detection are now easily settable without calculating the protocol/layermask anymore. When its later possible to use the sysfs interface to set/change the port parameters, this script can easily be adapted.
This commit is contained in:
parent
c1b1125207
commit
ce26b92218
1
Makefile
1
Makefile
|
@ -38,6 +38,7 @@ all:
|
|||
install: all
|
||||
cd $(LINUX) ; make SUBDIRS=$(MISDN_SRC) modules_install
|
||||
cp $(MISDNDIR)/include/linux/*.h $(INSTALL_PREFIX)/usr/include/linux/
|
||||
install -m755 misdn-init /etc/init.d/
|
||||
depmod
|
||||
|
||||
.PHONY: install all clean
|
||||
|
|
|
@ -0,0 +1,55 @@
|
|||
misdn-init: init-script to auto-configure and load the mISDN kernel drivers
|
||||
===========================================================================
|
||||
|
||||
This script makes it easy to configure and activate mISDN compatible
|
||||
adapter cards. It scans an eyecandy config file named misdn-init.conf
|
||||
for your card and port settings, then it loads the driver modules properly.
|
||||
The misdn-init.conf can also be autogenerated by the misdn-init script.
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
Usage: /etc/init.d/misdn-init start|stop|restart|config|scan|help
|
||||
|
||||
--start scan /etc/misdn-init.conf and load the mISDN drivers
|
||||
--stop unload the mISDN drivers
|
||||
--restart see stop, then start
|
||||
--config scan your PCI bus for mISDN compatible hardware and generate
|
||||
a /etc/misdn-init.conf
|
||||
--scan scan your PCI bus for mISDN compatible hardware and print
|
||||
the results to the console
|
||||
--help print the usage info
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
|
||||
* Here is a quick overview on how to use misdn-init:
|
||||
|
||||
1) Get and install misdn-init:
|
||||
$ wget http://www.beronet.com/downloads/chan_misdn/stable/chan_misdn.tar.gz
|
||||
$ tar zxf chan_misdn.tar.gz
|
||||
$ (as root) cp chan_misdn/misdn-init /etc/init.d/misdn-init
|
||||
|
||||
2) Let misdn-init scan your PCI bus for mISDN compatible hardware and write
|
||||
the results into /etc/misdn-init.conf:
|
||||
$ (as root) /etc/init.d/misdn-init config
|
||||
|
||||
3) (optional) Edit /etc/misdn-init.conf and set everything the way you want it.
|
||||
This file is heavily commented, hence it should be self-explaining.
|
||||
|
||||
4) (optional, but recommended) Add misdn-init to your run level.
|
||||
This is distribution dependend. Here an example for a debian system:
|
||||
ATTENTION: If you have services in your runlevels that depend
|
||||
on mISDN, make sure that misdn-init starts before, and
|
||||
stops after them (this is done by changing the values
|
||||
that are set to 60 in this example, more info: read the
|
||||
manpage for update-rc.d).
|
||||
$ (as root) update-rc.d misdn-init start 60 2 3 4 5 . stop 60 0 1 6 .
|
||||
|
||||
5) Run the following to start mISDN:
|
||||
$ (as root) /etc/init.d/misdn-init start
|
||||
|
||||
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
* Report Bugs:
|
||||
If you experience any bugs or have a feature request, please visit:
|
||||
www.isdn4linux.de/mantis
|
||||
|
|
@ -13,6 +13,7 @@
|
|||
#include "helper.h"
|
||||
#include "debug.h"
|
||||
#include "dsp.h"
|
||||
#include <asm/i387.h>
|
||||
|
||||
|
||||
/*
|
||||
|
@ -36,7 +37,13 @@ dsp_cancel_tx(dsp_t *dsp, u8 *data, int len)
|
|||
memcpy(&dsp->txbuf[dsp->txbuflen],data,len);
|
||||
dsp->txbuflen+=len;
|
||||
} else {
|
||||
printk("ECHOCAN: TXBUF Overflow len:%d newlen:%d\n",dsp->txbuflen,len);
|
||||
static int i=0;
|
||||
if(i==4000) {
|
||||
printk("ECHOCAN: i:%d TXBUF Overflow txbuflen:%d txcancellen:%d\n", i, dsp->txbuflen,len);
|
||||
i=0;
|
||||
}
|
||||
i+=len;
|
||||
|
||||
dsp->txbuflen=0;
|
||||
}
|
||||
|
||||
|
@ -54,8 +61,10 @@ dsp_cancel_rx(dsp_t *dsp, u8 *data, int len)
|
|||
int delta=dsp->txbuflen-len;
|
||||
|
||||
memcpy(tmp,&dsp->txbuf[len],delta);
|
||||
|
||||
|
||||
kernel_fpu_begin();
|
||||
bchdev_echocancel_chunk(dsp, data, dsp->txbuf, len);
|
||||
kernel_fpu_end();
|
||||
|
||||
memcpy(dsp->txbuf,tmp,delta);
|
||||
dsp->txbuflen=delta;
|
||||
|
@ -63,7 +72,12 @@ dsp_cancel_rx(dsp_t *dsp, u8 *data, int len)
|
|||
|
||||
//bchdev_echocancel_chunk(dsp, dsp->txbuf, data, len);
|
||||
} else {
|
||||
printk("ECHOCAN: TXBUF Underrun len:%d newlen:%d\n",dsp->txbuflen,len);
|
||||
static int i=0;
|
||||
if(i==4000) {
|
||||
printk("ECHOCAN: i:%d TXBUF Underrun txbuflen:%d rxcancellen:%d\n",i,dsp->txbuflen,len);
|
||||
i=0;
|
||||
}
|
||||
i+=len;
|
||||
}
|
||||
|
||||
}
|
||||
|
|
|
@ -0,0 +1,525 @@
|
|||
#!/bin/bash
|
||||
|
||||
################################################################################
|
||||
#
|
||||
# misdn-init init script
|
||||
#
|
||||
# Copyright (C) 2005, Nadi Sarrar
|
||||
#
|
||||
# Nadi Sarrar <nadi@beronet.com>
|
||||
#
|
||||
# This program is free software, distributed under the terms of
|
||||
# the GNU General Public License
|
||||
#
|
||||
|
||||
#
|
||||
# USAGE:
|
||||
#
|
||||
# /etc/init.d/misdn-init start|stop|restart|config|scan|help
|
||||
#
|
||||
|
||||
#
|
||||
# CONFIGURATION:
|
||||
#
|
||||
# Path to your misdn-init.conf:
|
||||
#
|
||||
misdn_init_conf="/etc/misdn-init.conf"
|
||||
#
|
||||
################################################################################
|
||||
|
||||
|
||||
MODPROBE=modprobe
|
||||
RMMOD=rmmod
|
||||
INSMOD=insmod
|
||||
LSPCI=lspci
|
||||
MKNOD=mknod
|
||||
|
||||
# HFC 8/4 (S0) Options
|
||||
master_clock=16
|
||||
|
||||
# HFC-E1 Options
|
||||
optical=16
|
||||
los=18
|
||||
ais=19
|
||||
slip=20
|
||||
|
||||
# Card Settings
|
||||
ulaw=8
|
||||
dtmf=9
|
||||
pcm_slave=11
|
||||
|
||||
function load_card_modules {
|
||||
|
||||
IFS=$'\n'
|
||||
|
||||
for line in $(sed -n -e '/^[^#]/p' ${misdn_init_conf});
|
||||
do
|
||||
var=`echo "${line}" | sed -e "s/^\(.*\)=.*/\1/"`
|
||||
val=`echo "${line}" | sed -e "s/^.*=\(.*\)/\1/"`
|
||||
|
||||
case "${var}" in
|
||||
card)
|
||||
nr=`echo "${val}" | sed -e "s/^\([0-9]*\),.*/\1/"`
|
||||
mod=`echo "${val}" | sed -e "s/^[^,]*,\([^,]*\).*/\1/"`
|
||||
if [ ${#val} -gt $(echo "obase=10;${#nr}+${#mod}+1" | bc) ]; then
|
||||
opns=`echo "${val}" | sed -e "s/^[^,]*,[^,]*,\(.*\)/\1/"`
|
||||
else
|
||||
opns=""
|
||||
fi
|
||||
case "${mod}" in
|
||||
0x*)
|
||||
hfcmulti[${nr}]=$(echo ${mod} | sed -e "s/^0x\([0-9]*\)/\1/")
|
||||
let "hfcports = ${hfcports} + ${hfcmulti[${nr}]}"
|
||||
IFS=$','
|
||||
for li in ${opns}; do
|
||||
hfcmulti[${nr}]=$(echo "obase=10;2^(${!li}-1)+${hfcmulti[${nr}]}" | bc)
|
||||
done
|
||||
IFS=$'\n'
|
||||
;;
|
||||
*)
|
||||
other_card[${nr}]=${mod}
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
te_ptp)
|
||||
IFS=$','
|
||||
for li in ${val}; do
|
||||
layermask[${li}]="0xf"
|
||||
protocol[${li}]=34 # 0x22 == 34
|
||||
done
|
||||
IFS=$'\n'
|
||||
;;
|
||||
te_ptmp)
|
||||
IFS=$','
|
||||
for li in ${val}; do
|
||||
layermask[${li}]="0xf"
|
||||
protocol[${li}]=2 # 0x2 == 2
|
||||
done
|
||||
IFS=$'\n'
|
||||
;;
|
||||
nt_*)
|
||||
IFS=$','
|
||||
for li in ${val}; do
|
||||
layermask[${li}]="0x3"
|
||||
protocol[${li}]=18 # 0x12 == 18
|
||||
done
|
||||
IFS=$'\n'
|
||||
;;
|
||||
te_capi_ptp)
|
||||
IFS=$','
|
||||
for li in ${val}; do
|
||||
layermask[${li}]="0x0"
|
||||
protocol[${li}]=34 # 0x22 == 34
|
||||
done
|
||||
IFS=$'\n'
|
||||
|
||||
addcapi=1
|
||||
;;
|
||||
te_capi_ptmp)
|
||||
IFS=$','
|
||||
for li in ${val}; do
|
||||
layermask[${li}]="0x0"
|
||||
protocol[${li}]=2 # 0x2 == 2
|
||||
done
|
||||
IFS=$'\n'
|
||||
addcapi=1
|
||||
;;
|
||||
|
||||
option)
|
||||
port=`echo "${val}" | sed -e "s/^\([0-9]*\),.*/\1/"`
|
||||
opt=`echo "${val}" | sed -e "s/^[0-9]*,\(.*\)/\1/"`
|
||||
|
||||
if [ -z ${protocol[${port}]} ]; then
|
||||
protocol[${port}]="0"
|
||||
fi
|
||||
|
||||
IFS=$','
|
||||
for li in ${opt}; do
|
||||
protocol[${port}]=$(echo "obase=10;2^(${!li}-1)+${protocol[${port}]}" | bc)
|
||||
done
|
||||
IFS=$'\n'
|
||||
;;
|
||||
poll)
|
||||
poll=${val}
|
||||
;;
|
||||
pcm)
|
||||
pcm=${val}
|
||||
;;
|
||||
debug)
|
||||
debug=${val}
|
||||
;;
|
||||
*)
|
||||
echo "unknown variable: ${var}"
|
||||
;;
|
||||
esac
|
||||
|
||||
done
|
||||
|
||||
echo "-----------------------------------------"
|
||||
echo " Loading module(s) for your misdn-cards:"
|
||||
echo "-----------------------------------------"
|
||||
|
||||
card_index=1
|
||||
port_index=1
|
||||
while [ ! -z ${hfcmulti[${card_index}]} ] || [ ! -z ${other_card[${card_index}]} ];
|
||||
do
|
||||
if [ ! -z ${hfcmulti[${card_index}]} ]; then
|
||||
# MODPROBE COMMAND FOR hfcmulti CARD
|
||||
hfcmulti_type="type="
|
||||
hfcmulti_prot="protocol="
|
||||
hfcmulti_layer="layermask="
|
||||
while [ ! -z ${hfcmulti[${card_index}]} ];
|
||||
do
|
||||
hfcmulti_type="${hfcmulti_type}$(echo "obase=16;\"0x\";${hfcmulti[${card_index}]}" | bc ),"
|
||||
let "card_index = ${card_index} + 1"
|
||||
done
|
||||
while [ ${hfcports} -gt 0 ];
|
||||
do
|
||||
if [ ! -z ${protocol[${port_index}]} ]; then
|
||||
hfcmulti_prot="${hfcmulti_prot}$(echo "obase=16;\"0x\";${protocol[${port_index}]}" | bc),"
|
||||
else
|
||||
hfcmulti_prot="${hfcmulti_prot}0x2,"
|
||||
fi
|
||||
if [ ! -z ${layermask[${port_index}]} ]; then
|
||||
hfcmulti_layer="${hfcmulti_layer}${layermask[${port_index}]},"
|
||||
else
|
||||
hfcmulti_layer="${hfcmulti_layer}0xf,"
|
||||
fi
|
||||
let "port_index = ${port_index} + 1"
|
||||
let "hfcports = ${hfcports} - 1"
|
||||
done
|
||||
hfcmulti_type="$(echo ${hfcmulti_type} | sed -e 's/^\(.*\),$/\1/')"
|
||||
hfcmulti_prot="$(echo ${hfcmulti_prot} | sed -e 's/^\(.*\),$/\1/')"
|
||||
hfcmulti_layer="$(echo ${hfcmulti_layer} | sed -e 's/^\(.*\),$/\1/')"
|
||||
hfcmulti_cmd="modprobe hfcmulti ${hfcmulti_type} ${hfcmulti_prot} ${hfcmulti_layer}"
|
||||
if [ ! -z ${poll} ]; then
|
||||
hfcmulti_cmd="${hfcmulti_cmd} poll=${poll}"
|
||||
fi
|
||||
if [ ! -z ${pcm} ]; then
|
||||
hfcmulti_cmd="${hfcmulti_cmd} pcm=${pcm}"
|
||||
fi
|
||||
if [ ! -z ${debug} ]; then
|
||||
hfcmulti_cmd="${hfcmulti_cmd} debug=${debug}"
|
||||
fi
|
||||
|
||||
echo ${hfcmulti_cmd}
|
||||
eval ${hfcmulti_cmd}
|
||||
else
|
||||
# MODPROBE COMMAND FOR _NON_ hfcmulti CARD
|
||||
other_cmd="modprobe ${other_card[${card_index}]}"
|
||||
if [ ! -z ${protocol[${port_index}]} ]; then
|
||||
other_prot="protocol=$(echo "obase=16;\"0x\";${protocol[${port_index}]}" | bc),"
|
||||
else
|
||||
other_prot="protocol=0x2,"
|
||||
fi
|
||||
if [ ! -z ${layermask[${port_index}]} ]; then
|
||||
other_layer="layermask=${layermask[${port_index}]},"
|
||||
else
|
||||
other_layer="layermask=0xf,"
|
||||
fi
|
||||
|
||||
let "prev = ${card_index}"
|
||||
let "card_index = ${card_index} + 1"
|
||||
let "port_index = ${port_index} + 1"
|
||||
while [ "${other_card[${card_index}]}" == "${other_card[${prev}]}" ];
|
||||
do
|
||||
if [ ! -z ${protocol[${port_index}]} ]; then
|
||||
other_prot="${other_prot}$(echo "obase=16;\"0x\";${protocol[${port_index}]}" | bc),"
|
||||
else
|
||||
other_prot="${other_prot}0x2,"
|
||||
fi
|
||||
if [ ! -z ${layermask[${port_index}]} ]; then
|
||||
other_layer="${other_layer}${layermask[${port_index}]},"
|
||||
else
|
||||
other_layer="${other_layer}0xf,"
|
||||
fi
|
||||
let "prev = ${card_index}"
|
||||
let "card_index = ${card_index} + 1"
|
||||
let "port_index = ${port_index} + 1"
|
||||
done
|
||||
|
||||
other_prot="$(echo ${other_prot} | sed -e 's/^\(.*\),$/\1/')"
|
||||
other_layer="$(echo ${other_layer} | sed -e 's/^\(.*\),$/\1/')"
|
||||
other_cmd="${other_cmd} ${other_prot} ${other_layer}"
|
||||
echo "${other_cmd}"
|
||||
eval ${other_cmd}
|
||||
fi
|
||||
done
|
||||
}
|
||||
|
||||
function unload_card_modules {
|
||||
|
||||
IFS=$'\n'
|
||||
|
||||
for line in $(sed -ne '/^[^#]/p' ${misdn_init_conf});
|
||||
do
|
||||
var=`echo "${line}" | sed -e "s/^\(.*\)=.*/\1/"`
|
||||
val=`echo "${line}" | sed -e "s/^.*=\(.*\)/\1/"`
|
||||
|
||||
case "${var}" in
|
||||
card)
|
||||
nr=`echo "${val}" | sed -e "s/^\([0-9]*\),.*/\1/"`
|
||||
mod=`echo "${val}" | sed -e "s/^[^,]*,\([^,]*\).*/\1/"`
|
||||
case "${mod}" in
|
||||
0x*)
|
||||
modulelist[${nr}]=hfcmulti
|
||||
;;
|
||||
*)
|
||||
modulelist[${nr}]=${mod}
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
|
||||
done
|
||||
|
||||
echo "-------------------------------------------"
|
||||
echo " Unloading module(s) for your misdn-cards:"
|
||||
echo "-------------------------------------------"
|
||||
|
||||
rmmod_cmd="${RMMOD} ${modulelist[1]}"
|
||||
echo "${rmmod_cmd}"
|
||||
eval ${rmmod_cmd}
|
||||
|
||||
index=2
|
||||
prev=1
|
||||
while [ ! -z ${modulelist[${index}]} ];
|
||||
do
|
||||
if [ ${modulelist[${index}]} != ${modulelist[${prev}]} ]; then
|
||||
rmmod_cmd="${RMMOD} ${modulelist[${index}]}"
|
||||
echo "${rmmod_cmd}"
|
||||
eval ${rmmod_cmd}
|
||||
fi
|
||||
let "prev = ${index}"
|
||||
let "index = ${index} + 1"
|
||||
done
|
||||
}
|
||||
|
||||
function create_misdn_init_conf {
|
||||
|
||||
cardcount=1
|
||||
cardconf=""
|
||||
IFS=$'\n'
|
||||
NL="
|
||||
"
|
||||
|
||||
function die {
|
||||
echo "[!!] ${1}"
|
||||
exit 1
|
||||
}
|
||||
|
||||
function addcard {
|
||||
cardline="${cardline}card=${cardcount},${1}${NL}"
|
||||
let "cardcount = ${cardcount} + 1"
|
||||
}
|
||||
|
||||
function addport {
|
||||
let "portcount = ${portcount} + ${1}"
|
||||
}
|
||||
|
||||
portcount=0
|
||||
|
||||
for line in $(${LSPCI} -n -d 1397:30b1); do
|
||||
addcard "0x1"
|
||||
addport 1
|
||||
done
|
||||
for line in $(${LSPCI} -n -d 1397:08b4); do
|
||||
addcard "0x4"
|
||||
addport 4
|
||||
done
|
||||
for line in $(${LSPCI} -n -d 1397:16b8); do
|
||||
addcard "0x8"
|
||||
addport 8
|
||||
done
|
||||
for line in $(${LSPCI} -n | grep "1397:\(2bd\(0\|6\|7\|8\|9\|a\|b\|c\)\|b100\)\|1043:0675\|0871:ffa\(1\|2\)\|1051:0100\|15b0:2bd0\|114f:007\(0\|1\|2\|3\)\|13d1:2bd1\|182d:3069"); do
|
||||
addcard "hfcpci"
|
||||
addport 1
|
||||
done
|
||||
for line in $(${LSPCI} -n -d 1244:0xa00); do
|
||||
addcard "avmfritz"
|
||||
addport 1
|
||||
done
|
||||
|
||||
if [ "${1}" == "scan" ]; then
|
||||
echo "[OK] found the following devices:"
|
||||
echo "${cardline}[ii] run \"/etc/init.d/misdn-init config\" to store this information to ${misdn_init_conf}"
|
||||
else
|
||||
|
||||
index=1
|
||||
portline="te_ptmp="
|
||||
while [ ${index} -le ${portcount} ]; do
|
||||
portline="${portline}${index},"
|
||||
let "index = ${index} + 1"
|
||||
done
|
||||
portline="$(echo ${portline} | sed -e 's/^\(.*\),$/\1/')"
|
||||
|
||||
misdn_cfg_pt1="#
|
||||
# Configuration file for your misdn hardware
|
||||
#
|
||||
# Usage: /etc/init.d/misdn-init start|stop|restart|config|scan|help
|
||||
#
|
||||
|
||||
#
|
||||
# Card Settings
|
||||
#
|
||||
# Syntax: card=<number>,<type>[,<option>...]
|
||||
#
|
||||
# <number> count your cards beginning with 1
|
||||
# <type> either 0x1,0x4 or 0x8 for your hfcmulti hardware,
|
||||
# or the name of your card driver module.
|
||||
# <option> ulaw - uLaw (instead of aLaw)
|
||||
# dtmf - enable DTMF detection on all B-channels
|
||||
# pcm_slave - set PCM bus into slave mode
|
||||
#"
|
||||
misdn_cfg_pt2="#
|
||||
# Port settings
|
||||
#
|
||||
# Syntax: <port_type>=<port_number>[,<port_number>...]
|
||||
#
|
||||
# <port_type> te_ptp - TE-Mode, PTP
|
||||
# te_ptmp - TE-Mode, PTMP
|
||||
# te_capi_ptp - TE-Mode (capi), PTP
|
||||
# te_capi_ptmp - TE-Mode (capi), PTMP
|
||||
# nt_ptp - NT-Mode, PTP
|
||||
# nt_ptmp - NT-Mode, PTMP
|
||||
# <port_number> port that should be considered
|
||||
#"
|
||||
misdn_cfg_pt3="#
|
||||
# Port Options
|
||||
#
|
||||
# Syntax: option=<port_number>,<option>[,<option>...]
|
||||
#
|
||||
# <option> master_clock - use master clock for this S/T interface
|
||||
# (only once per chip, only for HFC 8/4)
|
||||
# optical - optical (only HFC-E1)
|
||||
# los - report LOS (only HFC-E1)
|
||||
# ais - report AIS (only HFC-E1)
|
||||
# slip - report SLIP (only HFC-E1)
|
||||
#
|
||||
#option=1,master_clock
|
||||
#option=2,ais
|
||||
#option=3,optical,los,ais,slip
|
||||
|
||||
#
|
||||
# General Options for your hfcmulti hardware
|
||||
#
|
||||
# poll=<number>
|
||||
#
|
||||
# Only one poll value must be given for all cards.
|
||||
# Give the number of samples for each fifo process.
|
||||
# By default 128 is used. Decrease to reduce delay, increase to
|
||||
# reduce cpu load. If unsure, don't mess with it!!!
|
||||
# Valid is 32, 64, 128, 256.
|
||||
#
|
||||
# pcm=<number>
|
||||
#
|
||||
# Give the id of the PCM bus. All PCM busses with the same ID
|
||||
# are expected to be connected and have equal slots.
|
||||
# Only one chip of the PCM bus must be master, the others slave.
|
||||
# -1 means no support of PCM bus.
|
||||
#
|
||||
# debug=<number>
|
||||
#
|
||||
# Enable debugging (see hfc_multi.h for debug options).
|
||||
#
|
||||
poll=64
|
||||
#pcm=1
|
||||
debug=0"
|
||||
|
||||
if [ -f ${misdn_init_conf} ]; then
|
||||
cp "${misdn_init_conf}" "${misdn_init_conf}.save" || die "could not backup your existing ${misdn_init_conf}!"
|
||||
echo "[OK] ${misdn_init_conf} already present. backing it up to ${misdn_init_conf}.save"
|
||||
fi
|
||||
echo "${misdn_cfg_pt1}${NL}${cardline}${NL}${misdn_cfg_pt2}${NL}${portline}${NL}${NL}${misdn_cfg_pt3}" > ${misdn_init_conf} || die "could not write to /etc/misdn-init.conf!"
|
||||
#echo "${misdn_cfg_pt1}${NL}${cardline}${NL}${misdn_cfg_pt2}${NL}${portline}${NL}${NL}${misdn_cfg_pt3}" > testconf || die "could not write to /etc/misdn-init.conf!"
|
||||
|
||||
echo "[OK] ${misdn_init_conf} created. It's now safe to run \"/etc/init.d/misdn-init start\""
|
||||
if [ ${portcount} -gt 1 ]; then
|
||||
echo "[ii] make your ports (1-${portcount}) available in asterisk by editing \"/etc/asterisk/misdn.conf\""
|
||||
elif [ ${portcount} -eq 1 ]; then
|
||||
echo "[ii] make your port (1) available in asterisk by editing \"/etc/asterisk/misdn.conf\""
|
||||
fi
|
||||
fi
|
||||
}
|
||||
|
||||
function check_cfg_file {
|
||||
if [ ! -f ${misdn_init_conf} ]; then
|
||||
echo "[!!] failed to load: ${misdn_init_conf}"
|
||||
echo "run \"/etc/init.d/misdn-init config\" to scan your devices and generate a basic config file."
|
||||
exit 1
|
||||
fi
|
||||
}
|
||||
|
||||
# MAIN #############
|
||||
|
||||
case "$1" in
|
||||
start|--start)
|
||||
|
||||
check_cfg_file
|
||||
|
||||
$MODPROBE mISDN_core debug=0
|
||||
$MODPROBE mISDN_l1 debug=0
|
||||
$MODPROBE mISDN_l2 debug=0
|
||||
$MODPROBE l3udss1 debug=0
|
||||
$MODPROBE mISDN_dsp debug=0xf options=0x0
|
||||
$MODPROBE mISDN_capi
|
||||
|
||||
load_card_modules
|
||||
|
||||
sleep 1
|
||||
|
||||
if [ ! -e /dev/mISDN ]; then
|
||||
$MKNOD /dev/mISDN c 46 0
|
||||
echo "[i] creating device node: /dev/mISDN"
|
||||
fi
|
||||
;;
|
||||
|
||||
stop|--stop)
|
||||
|
||||
check_cfg_file
|
||||
|
||||
unload_card_modules
|
||||
|
||||
for mod in $(lsmod | sed -ne '/Module/!{s/\([^ ]*\).*/\1/;p}');
|
||||
do
|
||||
case "${mod}" in
|
||||
mISDN_capi | mISDN_dsp | l3udss1 | mISDN_l2 | mISDN_l1 | mISDN_isac | mISDN_core)
|
||||
eval "${RMMOD} ${mod}"
|
||||
;;
|
||||
esac
|
||||
done
|
||||
;;
|
||||
|
||||
restart|--restart)
|
||||
|
||||
check_cfg_file
|
||||
|
||||
sh $0 stop
|
||||
sleep 2 # some phones will release tei when layer 1 is down
|
||||
sh $0 start
|
||||
;;
|
||||
|
||||
config|--config)
|
||||
|
||||
create_misdn_init_conf
|
||||
|
||||
;;
|
||||
|
||||
scan|--scan)
|
||||
|
||||
create_misdn_init_conf scan
|
||||
|
||||
;;
|
||||
|
||||
help|--help)
|
||||
echo "Usage: $0 {start|stop|restart|config|scan|help}"
|
||||
exit 0
|
||||
;;
|
||||
|
||||
*)
|
||||
echo "Usage: $0 {start|stop|restart|config|scan|help}"
|
||||
exit 2
|
||||
;;
|
||||
|
||||
esac
|
||||
|
Loading…
Reference in New Issue