added a define for aggressive echo suppresssion

drivers/isdn/hardware/mISDN/core.c

@@ -85,7 +85,7 @@ mISDNd(void *data)
 #ifdef CONFIG_SMP
 	unlock_kernel();
 #endif
-	printk(KERN_DEBUG "mISDNd: kernel daemon started\n");
+	printk(KERN_DEBUG "mISDNd: kernel daemon started (current:%x)\n",current);
 
 	test_and_set_bit(mISDN_TFLAGS_STARTED, &hkt->Flags);
 
@@ -143,7 +143,7 @@ mISDNd(void *data)
 			printk(KERN_DEBUG "mISDNd: test event done\n");
 	}
 	
-	printk(KERN_DEBUG "mISDNd: daemon exit now\n");
+	printk(KERN_DEBUG "mISDNd: daemon exit now (current:%x)\n",current);
 	test_and_clear_bit(mISDN_TFLAGS_STARTED, &hkt->Flags);
 	test_and_clear_bit(mISDN_TFLAGS_ACTIV, &hkt->Flags);
 	discard_queue(&hkt->workq);

drivers/isdn/hardware/mISDN/dsp.h

@@ -49,6 +49,13 @@
 //#include "dsp_kb1ec.h"
 #include "dsp_mg2ec.h"
 
+
+
+/*
+*  uncomment this one to cancel echo more aggressive
+*/
+//#define AGGRESSIVE_SUPPRESSOR
+
 extern int dsp_options;
 extern int dsp_debug;
 extern int dsp_poll;

drivers/isdn/hardware/mISDN/hfc_multi.c

@@ -202,7 +202,7 @@ static const PCI_ENTRY id_list[] =
 	{0x10B5, CCAG_VID, 0x9030, 0x3136, VENDOR_CCD,
 	 "HFC-4S PCIBridgeEval", 4, 0, 0},      // PLX PCI-Bridge
 	{CCAG_VID, CCAG_VID, HFC4S_ID, 0xB566, VENDOR_CCD,
-	 "HFC-2S Beronet Card", 2, 1, 2},
+	 "HFC-2S Beronet Card", 2, 1, 3},
 	{0, 0, 0, 0, NULL, NULL, 0, 0, 0},
 };
 
@@ -660,6 +660,44 @@ hfcmulti_leds(hfc_multi_t *hc)
 			((led[0]&1)<<0) | ((led[1]&1)<<1) |
 			((led[2]&1)<<2) | ((led[3]&1)<<3));
 		break;
+
+		case 3:
+		/* red blinking = PH_DEACTIVATE
+		   red steady = PH_ACTIVATE
+		   green flashing = fifo activity
+		*/
+		for(i=0;i<2;i++) {
+			state = 0;
+			active = -1;
+			dch = hc->chan[(i<<2)|2].ch;
+			if (dch && test_bit(FLG_DCHANNEL, &dch->Flags)) {
+				state = dch->state;
+				active = test_bit(HFC_CFG_NTMODE, &hc->chan[dch->channel].cfg)?3:7;
+			}
+			if (state) {
+				if (state==active) {
+					if (hc->activity[i]) {
+						led[i] = 1; /* led green */
+						hc->activity[i] = 0;
+					} else
+						led[i] = 2; /* led red */
+				} else if (hc->ledcount>>11)
+					led[i] = 2; /* led red */
+				else
+					led[i] = 0; /* led off */
+			} else
+				led[i] = 0; /* led off */
+		}
+
+	//	printk("leds %d %d\n", led[0], led[1]);
+	//LEDME
+
+		HFC_outb(hc, R_GPIO_EN1,
+			((led[0]>0)<<0) | ((led[1]>0)<<1) );
+		HFC_outb(hc, R_GPIO_OUT1,
+			((led[0]&1)<<0) | ((led[1]&1)<<1) );
+
+		break;
 	}
 }
 /**************************/

drivers/isdn/hardware/mISDN/stack.c

@@ -478,8 +478,8 @@ mISDNStackd(void *data)
 #ifdef CONFIG_SMP
 	unlock_kernel();
 #endif
-	if ( core_debug & DEBUG_THREADS)
-		printk(KERN_DEBUG "mISDNStackd started for id(%08x)\n", st->id);
+//	if ( core_debug & DEBUG_THREADS)
+	printk(KERN_DEBUG "mISDNStackd started for id(%08x)\n", st->id);
 
 	for (;;) {
 		struct sk_buff	*skb, *c_skb;