665 lines
26 KiB
C
665 lines
26 KiB
C
/* $Id$
|
|
*
|
|
* Linux ISDN subsystem
|
|
*
|
|
* Definition of the interface between the subsystem and its low-level drivers.
|
|
*
|
|
* Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
|
|
* Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* $Log$
|
|
* Revision 1.32 1999/10/11 22:03:00 keil
|
|
* COMPAT_NEED_UACCESS (no include in isdn_compat.h)
|
|
*
|
|
* Revision 1.31 1999/09/06 07:29:36 fritz
|
|
* Changed my mail-address.
|
|
*
|
|
* Revision 1.30 1999/08/23 15:54:29 keil
|
|
* more backported changes from kernel 2.3.14
|
|
*
|
|
* Revision 1.29 1999/07/31 13:00:02 armin
|
|
* Added tty fax capabilities.
|
|
*
|
|
* Revision 1.28 1999/07/13 20:57:48 werner
|
|
* added callback ISDN_STAT_DISCH for limiting b-channel resources.
|
|
*
|
|
* Revision 1.27 1999/07/11 17:07:39 armin
|
|
* Added tty modem register S23.
|
|
* Added new layer 2 and 3 protocols for Fax and DSP functions.
|
|
*
|
|
* Revision 1.26 1999/07/01 08:35:44 keil
|
|
* compatibility to 2.3
|
|
*
|
|
* Revision 1.25 1998/06/17 19:51:55 he
|
|
* merged with 2.1.10[34] (cosmetics and udelay() -> mdelay())
|
|
* brute force fix to avoid Ugh's in isdn_tty_write()
|
|
* cleaned up some dead code
|
|
*
|
|
* Revision 1.24 1998/03/19 13:18:57 keil
|
|
* Start of a CAPI like interface for supplementary Service
|
|
* first service: SUSPEND
|
|
*
|
|
* Revision 1.23 1998/02/20 17:36:52 fritz
|
|
* Added L2-protocols for V.110, changed FEATURE-Flag-constants.
|
|
*
|
|
* Revision 1.22 1998/01/31 22:14:12 keil
|
|
* changes for 2.1.82
|
|
*
|
|
* Revision 1.21 1997/10/09 21:28:13 fritz
|
|
* New HL<->LL interface:
|
|
* New BSENT callback with nr. of bytes included.
|
|
* Sending without ACK.
|
|
* New L1 error status (not yet in use).
|
|
* Cleaned up obsolete structures.
|
|
* Implemented Cisco-SLARP.
|
|
* Changed local net-interface data to be dynamically allocated.
|
|
* Removed old 2.0 compatibility stuff.
|
|
*
|
|
* Revision 1.20 1997/05/27 15:18:06 fritz
|
|
* Added changes for recent 2.1.x kernels:
|
|
* changed return type of isdn_close
|
|
* queue_task_* -> queue_task
|
|
* clear/set_bit -> test_and_... where apropriate.
|
|
* changed type of hard_header_cache parameter.
|
|
*
|
|
* Revision 1.19 1997/03/25 23:13:56 keil
|
|
* NI-1 US protocol
|
|
*
|
|
* Revision 1.18 1997/03/04 22:09:18 calle
|
|
* Change macros copy_from_user and copy_to_user in inline function.
|
|
* These are now correct replacements of the functions for 2.1.xx
|
|
*
|
|
* Revision 1.17 1997/02/10 21:12:53 fritz
|
|
* More setup-interface changes.
|
|
*
|
|
* Revision 1.16 1997/02/10 19:42:57 fritz
|
|
* New interface for reporting incoming calls.
|
|
*
|
|
* Revision 1.15 1997/02/09 00:18:42 keil
|
|
* leased line support
|
|
*
|
|
* Revision 1.14 1997/02/03 23:43:00 fritz
|
|
* Misc changes for Kernel 2.1.X compatibility.
|
|
*
|
|
* Revision 1.13 1996/11/13 02:39:59 fritz
|
|
* More compatibility changes.
|
|
*
|
|
* Revision 1.12 1996/11/06 17:38:48 keil
|
|
* more changes for 2.1.X
|
|
*
|
|
* Revision 1.11 1996/10/23 11:59:42 fritz
|
|
* More compatibility changes.
|
|
*
|
|
* Revision 1.10 1996/10/22 23:14:19 fritz
|
|
* Changes for compatibility to 2.0.X and 2.1.X kernels.
|
|
*
|
|
* Revision 1.9 1996/06/06 21:24:24 fritz
|
|
* Started adding support for suspend/resume.
|
|
*
|
|
* Revision 1.8 1996/05/18 01:45:37 fritz
|
|
* More spelling corrections.
|
|
*
|
|
* Revision 1.7 1996/05/18 01:37:19 fritz
|
|
* Added spelling corrections and some minor changes
|
|
* to stay in sync with kernel.
|
|
*
|
|
* Revision 1.6 1996/05/17 03:59:28 fritz
|
|
* Marked rcvcallb and writebuf obsolete.
|
|
*
|
|
* Revision 1.5 1996/05/01 11:43:54 fritz
|
|
* Removed STANDALONE
|
|
*
|
|
* Revision 1.4 1996/05/01 11:38:40 fritz
|
|
* Added ISDN_FEATURE_L2_TRANS
|
|
*
|
|
* Revision 1.3 1996/04/29 22:57:54 fritz
|
|
* Added driverId and channel parameters to
|
|
* writecmd() and readstat().
|
|
* Added constant for voice-support.
|
|
*
|
|
* Revision 1.2 1996/04/20 17:02:40 fritz
|
|
* Changes to support skbuffs for Lowlevel-Drivers.
|
|
* Misc. typos
|
|
*
|
|
* Revision 1.1 1996/01/09 05:50:51 fritz
|
|
* Initial revision
|
|
*
|
|
*/
|
|
|
|
#ifndef isdnif_h
|
|
#define isdnif_h
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/isdn_compat.h>
|
|
|
|
/*
|
|
* Values for general protocol-selection
|
|
*/
|
|
#define ISDN_PTYPE_UNKNOWN 0 /* Protocol undefined */
|
|
#define ISDN_PTYPE_1TR6 1 /* german 1TR6-protocol */
|
|
#define ISDN_PTYPE_EURO 2 /* EDSS1-protocol */
|
|
#define ISDN_PTYPE_LEASED 3 /* for leased lines */
|
|
#define ISDN_PTYPE_NI1 4 /* US NI-1 protocol */
|
|
#define ISDN_PTYPE_MAX 7 /* Max. 8 Protocols */
|
|
|
|
/*
|
|
* Values for Layer-2-protocol-selection
|
|
*/
|
|
#define ISDN_PROTO_L2_X75I 0 /* X75/LAPB with I-Frames */
|
|
#define ISDN_PROTO_L2_X75UI 1 /* X75/LAPB with UI-Frames */
|
|
#define ISDN_PROTO_L2_X75BUI 2 /* X75/LAPB with UI-Frames */
|
|
#define ISDN_PROTO_L2_HDLC 3 /* HDLC */
|
|
#define ISDN_PROTO_L2_TRANS 4 /* Transparent (Voice) */
|
|
#define ISDN_PROTO_L2_X25DTE 5 /* X25/LAPB DTE mode */
|
|
#define ISDN_PROTO_L2_X25DCE 6 /* X25/LAPB DCE mode */
|
|
#define ISDN_PROTO_L2_V11096 7 /* V.110 bitrate adaption 9600 Baud */
|
|
#define ISDN_PROTO_L2_V11019 8 /* V.110 bitrate adaption 19200 Baud */
|
|
#define ISDN_PROTO_L2_V11038 9 /* V.110 bitrate adaption 38400 Baud */
|
|
#define ISDN_PROTO_L2_MODEM 10 /* Analog Modem on Board */
|
|
#define ISDN_PROTO_L2_FAX 11 /* Fax Group 2/3 */
|
|
#define ISDN_PROTO_L2_MAX 15 /* Max. 16 Protocols */
|
|
|
|
/*
|
|
* Values for Layer-3-protocol-selection
|
|
*/
|
|
#define ISDN_PROTO_L3_TRANS 0 /* Transparent */
|
|
#define ISDN_PROTO_L3_TRANSDSP 1 /* Transparent with DSP */
|
|
#define ISDN_PROTO_L3_FCLASS2 2 /* Fax Group 2/3 CLASS 2 */
|
|
#define ISDN_PROTO_L3_FCLASS1 3 /* Fax Group 2/3 CLASS 1 */
|
|
#define ISDN_PROTO_L3_MAX 7 /* Max. 8 Protocols */
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
#include <linux/skbuff.h>
|
|
|
|
/***************************************************************************/
|
|
/* Extensions made by Werner Cornelius (werner@ikt.de) */
|
|
/* */
|
|
/* The proceed command holds a incoming call in a state to leave processes */
|
|
/* enough time to check whether ist should be accepted. */
|
|
/* The PROT_IO Command extends the interface to make protocol dependant */
|
|
/* features available (call diversion, call waiting...). */
|
|
/* */
|
|
/* The PROT_IO Command is executed with the desired driver id and the arg */
|
|
/* parameter coded as follows: */
|
|
/* The lower 8 bits of arg contain the desired protocol from ISDN_PTYPE */
|
|
/* definitions. The upper 24 bits represent the protocol specific cmd/stat.*/
|
|
/* Any additional data is protocol and command specific. */
|
|
/* This mechanism also applies to the statcallb callback STAT_PROT. */
|
|
/* */
|
|
/* This suggested extension permits an easy expansion of protocol specific */
|
|
/* handling. Extensions may be added at any time without changing the HL */
|
|
/* driver code and not getting conflicts without certifications. */
|
|
/* The well known CAPI 2.0 interface handles such extensions in a similar */
|
|
/* way. Perhaps a protocol specific module may be added and separately */
|
|
/* loaded and linked to the basic isdn module for handling. */
|
|
/***************************************************************************/
|
|
|
|
/*****************/
|
|
/* DSS1 commands */
|
|
/*****************/
|
|
#define DSS1_CMD_INVOKE ((0x00 << 8) | ISDN_PTYPE_EURO) /* invoke a supplementary service */
|
|
#define DSS1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_EURO) /* abort a invoke cmd */
|
|
|
|
/*******************************/
|
|
/* DSS1 Status callback values */
|
|
/*******************************/
|
|
#define DSS1_STAT_INVOKE_RES ((0x80 << 8) | ISDN_PTYPE_EURO) /* Result for invocation */
|
|
#define DSS1_STAT_INVOKE_ERR ((0x81 << 8) | ISDN_PTYPE_EURO) /* Error Return for invocation */
|
|
#define DSS1_STAT_INVOKE_BRD ((0x82 << 8) | ISDN_PTYPE_EURO) /* Deliver invoke broadcast info */
|
|
|
|
|
|
/*********************************************************************/
|
|
/* structures for DSS1 commands and callback */
|
|
/* */
|
|
/* An action is invoked by sending a DSS1_CMD_INVOKE. The ll_id, proc*/
|
|
/* timeout, datalen and data fields must be set before calling. */
|
|
/* */
|
|
/* The return value is a positive hl_id value also delivered in the */
|
|
/* hl_id field. A value of zero signals no more left hl_id capacitys.*/
|
|
/* A negative return value signals errors in LL. So if the return */
|
|
/* value is <= 0 no action in LL will be taken -> request ignored */
|
|
/* */
|
|
/* The timeout field must be filled with a positive value specifying */
|
|
/* the amount of time the INVOKED process waits for a reaction from */
|
|
/* the network. */
|
|
/* If a response (either error or result) is received during this */
|
|
/* intervall, a reporting callback is initiated and the process will */
|
|
/* be deleted, the hl identifier will be freed. */
|
|
/* If no response is received during the specified intervall, a error*/
|
|
/* callback is initiated with timeout set to -1 and a datalen set */
|
|
/* to 0. */
|
|
/* If timeout is set to a value <= 0 during INVOCATION the process is*/
|
|
/* immediately deleted after sending the data. No callback occurs ! */
|
|
/* */
|
|
/* A currently waiting process may be aborted with INVOKE_ABORT. No */
|
|
/* callback will occur when a process has been aborted. */
|
|
/* */
|
|
/* Broadcast invoke frames from the network are reported via the */
|
|
/* STAT_INVOKE_BRD callback. The ll_id is set to 0, the other fields */
|
|
/* are supplied by the network and not by the HL. */
|
|
/*********************************************************************/
|
|
typedef struct
|
|
{ ulong ll_id; /* ID supplied by LL when executing */
|
|
/* a command and returned by HL for */
|
|
/* INVOKE_RES and INVOKE_ERR */
|
|
int hl_id; /* ID supplied by HL when called */
|
|
/* for executing a cmd and delivered */
|
|
/* for results and errors */
|
|
/* must be supplied by LL when aborting*/
|
|
int proc; /* invoke procedure used by CMD_INVOKE */
|
|
/* returned by callback and broadcast */
|
|
int timeout; /* timeout for INVOKE CMD in ms */
|
|
/* -1 in stat callback when timed out */
|
|
/* error value when error callback */
|
|
int datalen; /* length of cmd or stat data */
|
|
u_char *data;/* pointer to data delivered or send */
|
|
} dss1_cmd_stat;
|
|
|
|
/*
|
|
* Commands from linklevel to lowlevel
|
|
*
|
|
*/
|
|
#define ISDN_CMD_IOCTL 0 /* Perform ioctl */
|
|
#define ISDN_CMD_DIAL 1 /* Dial out */
|
|
#define ISDN_CMD_ACCEPTD 2 /* Accept an incoming call on D-Chan. */
|
|
#define ISDN_CMD_ACCEPTB 3 /* Request B-Channel connect. */
|
|
#define ISDN_CMD_HANGUP 4 /* Hangup */
|
|
#define ISDN_CMD_CLREAZ 5 /* Clear EAZ(s) of channel */
|
|
#define ISDN_CMD_SETEAZ 6 /* Set EAZ(s) of channel */
|
|
#define ISDN_CMD_GETEAZ 7 /* Get EAZ(s) of channel */
|
|
#define ISDN_CMD_SETSIL 8 /* Set Service-Indicator-List of channel */
|
|
#define ISDN_CMD_GETSIL 9 /* Get Service-Indicator-List of channel */
|
|
#define ISDN_CMD_SETL2 10 /* Set B-Chan. Layer2-Parameter */
|
|
#define ISDN_CMD_GETL2 11 /* Get B-Chan. Layer2-Parameter */
|
|
#define ISDN_CMD_SETL3 12 /* Set B-Chan. Layer3-Parameter */
|
|
#define ISDN_CMD_GETL3 13 /* Get B-Chan. Layer3-Parameter */
|
|
#define ISDN_CMD_LOCK 14 /* Signal usage by upper levels */
|
|
#define ISDN_CMD_UNLOCK 15 /* Release usage-lock */
|
|
#define ISDN_CMD_SUSPEND 16 /* Suspend connection */
|
|
#define ISDN_CMD_RESUME 17 /* Resume connection */
|
|
#define ISDN_CMD_PROCEED 18 /* Proceed with call establishment */
|
|
#define ISDN_CMD_ALERT 19 /* Alert after Proceeding */
|
|
#define ISDN_CMD_REDIR 20 /* Redir a incoming call */
|
|
#define ISDN_CMD_PROT_IO 21 /* Protocol specific commands */
|
|
#define CAPI_PUT_MESSAGE 22 /* CAPI message send down or up */
|
|
#define ISDN_CMD_FAXCMD 23 /* FAX commands to HL-driver */
|
|
#define ISDN_CMD_AUDIO 24 /* DSP, DTMF, ... settings */
|
|
|
|
/*
|
|
* Status-Values delivered from lowlevel to linklevel via
|
|
* statcallb().
|
|
*
|
|
*/
|
|
#define ISDN_STAT_STAVAIL 256 /* Raw status-data available */
|
|
#define ISDN_STAT_ICALL 257 /* Incoming call detected */
|
|
#define ISDN_STAT_RUN 258 /* Signal protocol-code is running */
|
|
#define ISDN_STAT_STOP 259 /* Signal halt of protocol-code */
|
|
#define ISDN_STAT_DCONN 260 /* Signal D-Channel connect */
|
|
#define ISDN_STAT_BCONN 261 /* Signal B-Channel connect */
|
|
#define ISDN_STAT_DHUP 262 /* Signal D-Channel disconnect */
|
|
#define ISDN_STAT_BHUP 263 /* Signal B-Channel disconnect */
|
|
#define ISDN_STAT_CINF 264 /* Charge-Info */
|
|
#define ISDN_STAT_LOAD 265 /* Signal new lowlevel-driver is loaded */
|
|
#define ISDN_STAT_UNLOAD 266 /* Signal unload of lowlevel-driver */
|
|
#define ISDN_STAT_BSENT 267 /* Signal packet sent */
|
|
#define ISDN_STAT_NODCH 268 /* Signal no D-Channel */
|
|
#define ISDN_STAT_ADDCH 269 /* Add more Channels */
|
|
#define ISDN_STAT_CAUSE 270 /* Cause-Message */
|
|
#define ISDN_STAT_ICALLW 271 /* Incoming call without B-chan waiting */
|
|
#define ISDN_STAT_REDIR 272 /* Redir result */
|
|
#define ISDN_STAT_PROT 273 /* protocol IO specific callback */
|
|
#define ISDN_STAT_DISPLAY 274 /* deliver a received display message */
|
|
#define ISDN_STAT_L1ERR 275 /* Signal Layer-1 Error */
|
|
#define ISDN_STAT_FAXIND 276 /* FAX indications from HL-driver */
|
|
#define ISDN_STAT_AUDIO 277 /* DTMF, DSP indications */
|
|
#define ISDN_STAT_DISCH 278 /* Disable/Enable channel usage */
|
|
|
|
/*
|
|
* Audio commands
|
|
*/
|
|
#define ISDN_AUDIO_SETDD 0 /* Set DTMF detection */
|
|
#define ISDN_AUDIO_DTMF 1 /* Rx/Tx DTMF */
|
|
|
|
/*
|
|
* Values for errcode field
|
|
*/
|
|
#define ISDN_STAT_L1ERR_SEND 1
|
|
#define ISDN_STAT_L1ERR_RECV 2
|
|
|
|
/*
|
|
* Values for feature-field of interface-struct.
|
|
*/
|
|
/* Layer 2 */
|
|
#define ISDN_FEATURE_L2_X75I (0x0001 << ISDN_PROTO_L2_X75I)
|
|
#define ISDN_FEATURE_L2_X75UI (0x0001 << ISDN_PROTO_L2_X75UI)
|
|
#define ISDN_FEATURE_L2_X75BUI (0x0001 << ISDN_PROTO_L2_X75BUI)
|
|
#define ISDN_FEATURE_L2_HDLC (0x0001 << ISDN_PROTO_L2_HDLC)
|
|
#define ISDN_FEATURE_L2_TRANS (0x0001 << ISDN_PROTO_L2_TRANS)
|
|
#define ISDN_FEATURE_L2_X25DTE (0x0001 << ISDN_PROTO_L2_X25DTE)
|
|
#define ISDN_FEATURE_L2_X25DCE (0x0001 << ISDN_PROTO_L2_X25DCE)
|
|
#define ISDN_FEATURE_L2_V11096 (0x0001 << ISDN_PROTO_L2_V11096)
|
|
#define ISDN_FEATURE_L2_V11019 (0x0001 << ISDN_PROTO_L2_V11019)
|
|
#define ISDN_FEATURE_L2_V11038 (0x0001 << ISDN_PROTO_L2_V11038)
|
|
#define ISDN_FEATURE_L2_MODEM (0x0001 << ISDN_PROTO_L2_MODEM)
|
|
#define ISDN_FEATURE_L2_FAX (0x0001 << ISDN_PROTO_L2_FAX)
|
|
|
|
#define ISDN_FEATURE_L2_MASK (0x0FFFF) /* Max. 16 protocols */
|
|
#define ISDN_FEATURE_L2_SHIFT (0)
|
|
|
|
/* Layer 3 */
|
|
#define ISDN_FEATURE_L3_TRANS (0x10000 << ISDN_PROTO_L3_TRANS)
|
|
#define ISDN_FEATURE_L3_TRANSDSP (0x10000 << ISDN_PROTO_L3_TRANSDSP)
|
|
#define ISDN_FEATURE_L3_FCLASS2 (0x10000 << ISDN_PROTO_L3_FCLASS2)
|
|
#define ISDN_FEATURE_L3_FCLASS1 (0x10000 << ISDN_PROTO_L3_FCLASS1)
|
|
|
|
#define ISDN_FEATURE_L3_MASK (0x0FF0000) /* Max. 8 Protocols */
|
|
#define ISDN_FEATURE_L3_SHIFT (16)
|
|
|
|
/* Signaling */
|
|
#define ISDN_FEATURE_P_UNKNOWN (0x1000000 << ISDN_PTYPE_UNKNOWN)
|
|
#define ISDN_FEATURE_P_1TR6 (0x1000000 << ISDN_PTYPE_1TR6)
|
|
#define ISDN_FEATURE_P_EURO (0x1000000 << ISDN_PTYPE_EURO)
|
|
#define ISDN_FEATURE_P_NI1 (0x1000000 << ISDN_PTYPE_NI1)
|
|
|
|
#define ISDN_FEATURE_P_MASK (0x0FF000000) /* Max. 8 Protocols */
|
|
#define ISDN_FEATURE_P_SHIFT (24)
|
|
|
|
typedef struct setup_parm {
|
|
unsigned char phone[32]; /* Remote Phone-Number */
|
|
unsigned char eazmsn[32]; /* Local EAZ or MSN */
|
|
unsigned char si1; /* Service Indicator 1 */
|
|
unsigned char si2; /* Service Indicator 2 */
|
|
unsigned char plan; /* Numbering plan */
|
|
unsigned char screen; /* Screening info */
|
|
} setup_parm;
|
|
|
|
|
|
#ifdef CONFIG_ISDN_TTY_FAX
|
|
/* T.30 Fax G3 */
|
|
|
|
#define FAXIDLEN 21
|
|
|
|
typedef struct T30_s {
|
|
/* session parameters */
|
|
__u8 resolution __attribute__ ((packed));
|
|
__u8 rate __attribute__ ((packed));
|
|
__u8 width __attribute__ ((packed));
|
|
__u8 length __attribute__ ((packed));
|
|
__u8 compression __attribute__ ((packed));
|
|
__u8 ecm __attribute__ ((packed));
|
|
__u8 binary __attribute__ ((packed));
|
|
__u8 scantime __attribute__ ((packed));
|
|
__u8 id[FAXIDLEN] __attribute__ ((packed));
|
|
/* additional parameters */
|
|
__u8 phase __attribute__ ((packed));
|
|
__u8 direction __attribute__ ((packed));
|
|
__u8 code __attribute__ ((packed));
|
|
__u8 badlin __attribute__ ((packed));
|
|
__u8 badmul __attribute__ ((packed));
|
|
__u8 bor __attribute__ ((packed));
|
|
__u8 fet __attribute__ ((packed));
|
|
__u8 pollid[FAXIDLEN] __attribute__ ((packed));
|
|
__u8 cq __attribute__ ((packed));
|
|
__u8 cr __attribute__ ((packed));
|
|
__u8 ctcrty __attribute__ ((packed));
|
|
__u8 minsp __attribute__ ((packed));
|
|
__u8 phcto __attribute__ ((packed));
|
|
__u8 rel __attribute__ ((packed));
|
|
__u8 nbc __attribute__ ((packed));
|
|
/* remote station parameters */
|
|
__u8 r_resolution __attribute__ ((packed));
|
|
__u8 r_rate __attribute__ ((packed));
|
|
__u8 r_width __attribute__ ((packed));
|
|
__u8 r_length __attribute__ ((packed));
|
|
__u8 r_compression __attribute__ ((packed));
|
|
__u8 r_ecm __attribute__ ((packed));
|
|
__u8 r_binary __attribute__ ((packed));
|
|
__u8 r_scantime __attribute__ ((packed));
|
|
__u8 r_id[FAXIDLEN] __attribute__ ((packed));
|
|
__u8 r_code __attribute__ ((packed));
|
|
} T30_s;
|
|
|
|
#define ISDN_TTY_FAX_CONN_IN 0
|
|
#define ISDN_TTY_FAX_CONN_OUT 1
|
|
|
|
#define ISDN_TTY_FAX_FCON 0
|
|
#define ISDN_TTY_FAX_DIS 1
|
|
#define ISDN_TTY_FAX_FTT 2
|
|
#define ISDN_TTY_FAX_MCF 3
|
|
#define ISDN_TTY_FAX_DCS 4
|
|
#define ISDN_TTY_FAX_TRAIN_OK 5
|
|
#define ISDN_TTY_FAX_EOP 6
|
|
#define ISDN_TTY_FAX_EOM 7
|
|
#define ISDN_TTY_FAX_MPS 8
|
|
#define ISDN_TTY_FAX_DTC 9
|
|
#define ISDN_TTY_FAX_RID 10
|
|
#define ISDN_TTY_FAX_HNG 11
|
|
#define ISDN_TTY_FAX_DT 12
|
|
#define ISDN_TTY_FAX_FCON_I 13
|
|
#define ISDN_TTY_FAX_DR 14
|
|
#define ISDN_TTY_FAX_ET 15
|
|
#define ISDN_TTY_FAX_CFR 16
|
|
#define ISDN_TTY_FAX_PTS 17
|
|
#define ISDN_TTY_FAX_SENT 18
|
|
|
|
#define ISDN_FAX_PHASE_IDLE 0
|
|
#define ISDN_FAX_PHASE_A 1
|
|
#define ISDN_FAX_PHASE_B 2
|
|
#define ISDN_FAX_PHASE_C 3
|
|
#define ISDN_FAX_PHASE_D 4
|
|
#define ISDN_FAX_PHASE_E 5
|
|
|
|
#endif /* TTY_FAX */
|
|
|
|
#define ISDN_FAX_CLASS1_FAE 0
|
|
#define ISDN_FAX_CLASS1_FTS 1
|
|
#define ISDN_FAX_CLASS1_FRS 2
|
|
#define ISDN_FAX_CLASS1_FTM 3
|
|
#define ISDN_FAX_CLASS1_FRM 4
|
|
#define ISDN_FAX_CLASS1_FTH 5
|
|
#define ISDN_FAX_CLASS1_FRH 6
|
|
#define ISDN_FAX_CLASS1_CTRL 7
|
|
|
|
#define ISDN_FAX_CLASS1_OK 0
|
|
#define ISDN_FAX_CLASS1_CONNECT 1
|
|
#define ISDN_FAX_CLASS1_NOCARR 2
|
|
#define ISDN_FAX_CLASS1_ERROR 3
|
|
#define ISDN_FAX_CLASS1_FCERROR 4
|
|
#define ISDN_FAX_CLASS1_QUERY 5
|
|
|
|
typedef struct {
|
|
__u8 cmd;
|
|
__u8 subcmd;
|
|
__u8 para[50];
|
|
} aux_s;
|
|
|
|
#define AT_COMMAND 0
|
|
#define AT_EQ_VALUE 1
|
|
#define AT_QUERY 2
|
|
#define AT_EQ_QUERY 3
|
|
|
|
/* CAPI structs */
|
|
|
|
/* this is compatible to the old union size */
|
|
#define MAX_CAPI_PARA_LEN 50
|
|
|
|
typedef struct {
|
|
/* Header */
|
|
__u16 Length;
|
|
__u16 ApplId;
|
|
__u8 Command;
|
|
__u8 Subcommand;
|
|
__u16 Messagenumber;
|
|
|
|
/* Parameter */
|
|
union {
|
|
__u32 Controller;
|
|
__u32 PLCI;
|
|
__u32 NCCI;
|
|
} adr;
|
|
__u8 para[MAX_CAPI_PARA_LEN];
|
|
} capi_msg;
|
|
|
|
/*
|
|
* Structure for exchanging above infos
|
|
*
|
|
*/
|
|
typedef struct {
|
|
int driver; /* Lowlevel-Driver-ID */
|
|
int command; /* Command or Status (see above) */
|
|
ulong arg; /* Additional Data */
|
|
union {
|
|
ulong errcode; /* Type of error with STAT_L1ERR */
|
|
int length; /* Amount of bytes sent with STAT_BSENT */
|
|
u_char num[50]; /* Additional Data */
|
|
setup_parm setup;/* For SETUP msg */
|
|
capi_msg cmsg; /* For CAPI like messages */
|
|
char display[85];/* display message data */
|
|
dss1_cmd_stat dss1_io; /* DSS1 IO-parameter/result */
|
|
aux_s aux; /* for modem commands/indications */
|
|
#ifdef CONFIG_ISDN_TTY_FAX
|
|
T30_s *fax; /* Pointer to ttys fax struct */
|
|
#endif
|
|
} parm;
|
|
} isdn_ctrl;
|
|
|
|
/*
|
|
* The interface-struct itself (initialized at load-time of lowlevel-driver)
|
|
*
|
|
* See Documentation/isdn/INTERFACE for a description, how the communication
|
|
* between the ISDN subsystem and its drivers is done.
|
|
*
|
|
*/
|
|
typedef struct {
|
|
/* Number of channels supported by this driver
|
|
*/
|
|
int channels;
|
|
|
|
/*
|
|
* Maximum Size of transmit/receive-buffer this driver supports.
|
|
*/
|
|
int maxbufsize;
|
|
|
|
/* Feature-Flags for this driver.
|
|
* See defines ISDN_FEATURE_... for Values
|
|
*/
|
|
unsigned long features;
|
|
|
|
/*
|
|
* Needed for calculating
|
|
* dev->hard_header_len = linklayer header + hl_hdrlen;
|
|
* Drivers, not supporting sk_buff's should set this to 0.
|
|
*/
|
|
unsigned short hl_hdrlen;
|
|
|
|
/*
|
|
* Receive-Callback using sk_buff's
|
|
* Parameters:
|
|
* int Driver-ID
|
|
* int local channel-number (0 ...)
|
|
* struct sk_buff *skb received Data
|
|
*/
|
|
void (*rcvcallb_skb)(int, int, struct sk_buff *);
|
|
|
|
/* Status-Callback
|
|
* Parameters:
|
|
* isdn_ctrl*
|
|
* driver = Driver ID.
|
|
* command = One of above ISDN_STAT_... constants.
|
|
* arg = depending on status-type.
|
|
* num = depending on status-type.
|
|
*/
|
|
int (*statcallb)(isdn_ctrl*);
|
|
|
|
/* Send command
|
|
* Parameters:
|
|
* isdn_ctrl*
|
|
* driver = Driver ID.
|
|
* command = One of above ISDN_CMD_... constants.
|
|
* arg = depending on command.
|
|
* num = depending on command.
|
|
*/
|
|
int (*command)(isdn_ctrl*);
|
|
|
|
/*
|
|
* Send data using sk_buff's
|
|
* Parameters:
|
|
* int driverId
|
|
* int local channel-number (0...)
|
|
* int Flag: Need ACK for this packet.
|
|
* struct sk_buff *skb Data to send
|
|
*/
|
|
int (*writebuf_skb) (int, int, int, struct sk_buff *);
|
|
|
|
/* Send raw D-Channel-Commands
|
|
* Parameters:
|
|
* u_char pointer data
|
|
* int length of data
|
|
* int Flag: 0 = Call form Kernel-Space (use memcpy,
|
|
* no schedule allowed)
|
|
* 1 = Data is in User-Space (use memcpy_fromfs,
|
|
* may schedule)
|
|
* int driverId
|
|
* int local channel-number (0 ...)
|
|
*/
|
|
int (*writecmd)(const u_char*, int, int, int, int);
|
|
|
|
/* Read raw Status replies
|
|
* u_char pointer data (volatile)
|
|
* int length of buffer
|
|
* int Flag: 0 = Call form Kernel-Space (use memcpy,
|
|
* no schedule allowed)
|
|
* 1 = Data is in User-Space (use memcpy_fromfs,
|
|
* may schedule)
|
|
* int driverId
|
|
* int local channel-number (0 ...)
|
|
*/
|
|
int (*readstat)(u_char*, int, int, int, int);
|
|
|
|
char id[20];
|
|
} isdn_if;
|
|
|
|
/*
|
|
* Function which must be called by lowlevel-driver at loadtime with
|
|
* the following fields of above struct set:
|
|
*
|
|
* channels Number of channels that will be supported.
|
|
* hl_hdrlen Space to preserve in sk_buff's when sending. Drivers, not
|
|
* supporting sk_buff's should set this to 0.
|
|
* command Address of Command-Handler.
|
|
* features Bitwise coded Features of this driver. (use ISDN_FEATURE_...)
|
|
* writebuf_skb Address of Skbuff-Send-Handler.
|
|
* writecmd " " D-Channel " which accepts raw D-Ch-Commands.
|
|
* readstat " " D-Channel " which delivers raw Status-Data.
|
|
*
|
|
* The linklevel-driver fills the following fields:
|
|
*
|
|
* channels Driver-ID assigned to this driver. (Must be used on all
|
|
* subsequent callbacks.
|
|
* rcvcallb_skb Address of handler for received Skbuff's.
|
|
* statcallb " " " for status-changes.
|
|
*
|
|
*/
|
|
extern int register_isdn(isdn_if*);
|
|
#ifdef COMPAT_NEED_UACCESS
|
|
#include <asm/uaccess.h>
|
|
#endif
|
|
|
|
#endif /* __KERNEL__ */
|
|
#endif /* isdnif_h */
|