89 lines
2.4 KiB
Plaintext
89 lines
2.4 KiB
Plaintext
$Id$
|
|
|
|
(c) 1999 Cytronics & Melware
|
|
|
|
This document describes the eicon driver for the
|
|
Eicon.Diehl active ISDN cards.
|
|
|
|
It is meant to be used with isdn4linux, an ISDN link-level module for Linux.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
|
|
|
|
Supported Cards
|
|
---------------
|
|
|
|
- S-Card ISA
|
|
- SX-Card ISA
|
|
- SXn-Card ISA
|
|
- SCOM-Card ISA
|
|
- Quadro-Card ISA
|
|
- S2M-Card ISA
|
|
- DIVA Server BRI/PCI 2M
|
|
- DIVA Server PRI/PCI 2M (9M 23M 30M)
|
|
(Only analog modem functions of the DSPs are currently implemented)
|
|
|
|
ISDN D-Channel Protocols
|
|
------------------------
|
|
|
|
- ETSI (Euro-DSS1)
|
|
- 1TR6 (German ISDN) *not testet*
|
|
|
|
|
|
|
|
You can load the module simply by using the insmod or modprobe function :
|
|
|
|
insmod eicon [id=driverid] [membase=<membase>] [irq=<irq>]
|
|
|
|
|
|
The module will automatically probe the PCI-cards. If the id-options
|
|
is omitted, the driver will assume 'eicon0' for the first pci card and
|
|
increases the digit with each further card. With a given driver-id
|
|
the module appends a number starting with '0'.
|
|
|
|
For ISA-cards you have to specify membase, irq and id. If id or
|
|
membase is missing/invalid, the driver will not be loaded except
|
|
PCI-cards were found. Additional ISA-cards and irq/membase changes
|
|
can be done with the eiconctrl utility.
|
|
|
|
After loading the module, you have to download the protocol and
|
|
dsp-code by using the eiconctrl utility of isdn4k-utils.
|
|
|
|
|
|
Example for loading and starting a BRI card with E-DSS1 Protocol.
|
|
|
|
eiconctrl [-d DriverId] load etsi
|
|
|
|
|
|
Example for loading and starting a PRI card with E-DSS1 Protocol.
|
|
|
|
eiconctrl [-d DriverId] load etsi -s2 -n
|
|
|
|
|
|
Details about using the eiconctrl utility are in 'man eiconctrl'
|
|
or will be printed by starting eiconctrl without any parameters.
|
|
|
|
|
|
|
|
Any reports about bugs, errors and even wishes are welcome.
|
|
|
|
|
|
Have fun !
|
|
|
|
Armin Schindler
|
|
mac@melware.de
|
|
http://www.melware.de
|