--- linux-2.0.29.org/Documentation/Configure.help	Tue Mar 25 23:24:33 1997
+++ /usr/src/linux/Documentation/Configure.help	Tue Mar 25 22:52:13 1997
@@ -1671,6 +1671,15 @@
   available via ftp (user: anonymous) at
   sunsite.unc.edu:/pub/Linux/docs/HOWTO, is for you.
 
+GDT SCSI Disk Array Controller support
+CONFIG_SCSI_GDTH
+  This is a driver for all SCSI Disk Array Controllers (EISA/ISA/PCI) 
+  manufactured by ICP vortex. It is documented in the kernel source in
+  drivers/scsi/gdth.c and drivers/scsi/gdth.h. This driver is also
+  available as a module ( = code which can be inserted in and removed
+  from the running kernel whenever you want). If you want to compile 
+  it as a module, say M here and read Documentation/modules.txt. 	
+
 IOMEGA Parallel Port ZIP drive SCSI support
 CONFIG_SCSI_PPA
   This driver supports the parallel port version of IOMEGA's ZIP drive
@@ -2734,6 +2743,14 @@
   change a setting in the file include/linux/gscd.h before compiling
   the kernel.
 
+MicroSolutions backup CDROM support
+CONFIG_BPCD
+  MicroSolutions' backup CDROM is an external drive that connects to
+  the parallel port.  Say Y if you have one of these, and read the
+  file linux/Documentation/cdrom/bpcd.  If you have several different
+  devices that will share a common parallel port, say M and build them
+  as modules.
+
 Philips/LMS CM206 CDROM support
 CONFIG_CM206
   If you have a Philips/LMS CDROM drive cm206 in combination with a
@@ -3258,6 +3275,7 @@
   module load time.
 
 
+
 Mouse Support (not serial mice)
 CONFIG_MOUSE
   This is for machines with a bus mouse or a PS/2 mouse as opposed to
@@ -3775,6 +3793,90 @@
   Documentation/isdn/README on how to configure it using 16.3, a
   different D-channel protocol, or non-standard irq/port/shmem
   settings.
+
+HiSax SiemensChipSet driver support
+CONFIG_ISDN_DRV_HISAX
+  This is an alternative driver supporting the Siemens chipset on
+  various ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, 
+  Teles S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and 
+  many compatibles).It's a complete rewrite of the original Teles 
+  driver.  So you either say M or Y here and N in the above Teles 
+  section.
+  See Documentation/isdn/README.HiSax for further informations on
+  using this driver.
+
+HiSax Support for Teles 16.0/8.0
+CONFIG_HISAX_16_0
+  This enables HiSax support for the Teles ISDN-cards S0-16.0,
+  S0-8 and many compatibles.
+  See Documentation/isdn/README.HiSax on how to configure it 
+  using the different cards, a different D-channel protocol, or
+  non-standard irq/port/shmem settings.
+
+HiSax Support for Teles 16.3 or PNP or PCMCIA
+CONFIG_HISAX_16_3
+  This enables HiSax support for the Teles ISDN-cards S0-16.3
+  the Teles/Creatix PnP and the Teles PCMCIA.
+  See Documentation/isdn/README.HiSax on how to configure it 
+  using the different cards, a different D-channel protocol, or
+  non-standard irq/port/shmem settings.
+
+HiSax Support for AVM A1 (Fritz)
+CONFIG_HISAX_AVM_A1
+  This enables HiSax support for the AVM A1 (aka "Fritz").
+  See Documentation/isdn/README.HiSax on how to configure it
+  using the different cards, a different D-channel protocol, or
+  non-standard irq/port/shmem settings.
+
+HiSax Support for Elsa ISA cards
+CONFIG_HISAX_ELSA_PCC
+  This enables HiSax support for the Elsa Mircolink cards and
+  for the Elsa Quickstep series cards for the ISA bus.
+  You don't have to select "HiSax Support for Elsa PCMCIA card"
+  at the same time.
+  See Documentation/isdn/README.HiSax on how to configure it 
+  using the different cards, a different D-channel protocol, or
+  non-standard irq/port/shmem settings.
+
+HiSax Support for Elsa PCMCIA card
+CONFIG_HISAX_ELSA_PCMCIA
+  This enables HiSax support for the Elsa PCMCIA card.
+  You don't have to select "HiSax Support for Elsa ISA cards" at
+  the same time.
+  See Documentation/isdn/README.HiSax on how to configure it 
+  using the different cards, a different D-channel protocol, or
+  non-standard irq/port/shmem settings.
+
+HiSax Support for ITK ix1-micro Revision 2
+CONFIG_HISAX_IX1MICROR2
+  This enables HiSax support for the ITK ix1-micro Revision 2 card.
+  See Documentation/isdn/README.HiSax on how to configure it 
+  using the different cards, a different D-channel protocol, or
+  non-standard irq/port/shmem settings.
+
+HiSax Support for EURO/DSS1
+CONFIG_HISAX_EURO
+  You should choose your D-channel protocol your local
+  telephone service provider uses here by saying Y or N.
+  NOTE: This is mutually exclusive with HiSax Support for
+  german 1TR6 and US/NI-1 if you have only one ISDN card
+  installed.
+
+HiSax Support for US/NI-1
+CONFIG_HISAX_NI1
+  You should choose your D-channel protocol your local
+  telephone service provider uses here by saying Y or N.
+  NOTE: This is mutually exclusive with HiSax Support for
+  german 1TR6 and EURO/DSS1 if you have only one ISDN card
+  installed.
+
+HiSax Support for german 1TR6
+CONFIG_HISAX_1TR6
+  You should choose your D-channel protocol your local
+  telephone service provider uses here by saying Y or N.
+  NOTE: This is mutually exclusive with HiSax Support for
+  EURO/DSS1 and US/NI-1 if you have only one ISDN card
+  installed.
 
 PCBIT-D support
 CONFIG_ISDN_DRV_PCBIT