Update and added missing AT&L description.
This commit is contained in:
parent
587438f993
commit
8e9677eecd
|
@ -80,8 +80,7 @@ README for the ISDN-subsystem
|
|||
The functionality is almost the same as that of a serial device
|
||||
(the line-discs are handled by the kernel), which lets you run
|
||||
SLIP, CSLIP and asynchronous PPP through the devices. We have tested
|
||||
Seyon, minicom, CSLIP (uri-dip) PPP and mgetty (compiled with NO_FAX),
|
||||
XCept.
|
||||
Seyon, minicom, CSLIP (uri-dip) PPP, mgetty, XCept and Hylafax.
|
||||
|
||||
The modem-emulation supports the following:
|
||||
1.3.1 Commands:
|
||||
|
@ -124,6 +123,10 @@ README for the ISDN-subsystem
|
|||
AT&D3 Same as AT&D2 but also resets all registers.
|
||||
AT&Ex Set the EAZ/MSN for this channel to x.
|
||||
AT&F Reset all registers and profile to "factory-defaults"
|
||||
AT&Lx Set list of phone numbers to listen on. x is a
|
||||
list of wildcard patterns separated by semicolon.
|
||||
If this is set, it has precedence over the MSN set
|
||||
by AT&E.
|
||||
AT&Rx Select V.110 bitrate adaption.
|
||||
This command enables V.110 protocol with 9600 baud
|
||||
(x=9600), 19200 baud (x=19200) or 38400 baud
|
||||
|
@ -238,7 +241,8 @@ README for the ISDN-subsystem
|
|||
15 0 Layer-3 protocol:
|
||||
0 = transparent
|
||||
1 = transparent with audio features (e.g. DSP)
|
||||
2 = Fax G3 (S14 has to be set to 11)
|
||||
2 = Fax G3 Class 2 commands (S14 has to be set to 11)
|
||||
2 = Fax G3 Class 1 commands (S14 has to be set to 11)
|
||||
16 250 Send-Packet-size/16
|
||||
17 8 Window-size (not yet implemented)
|
||||
18 4 Bit coded register, Service-Octet-1 to accept,
|
||||
|
@ -309,8 +313,6 @@ README for the ISDN-subsystem
|
|||
If an incoming call matches one network interface, it gets connected to it.
|
||||
If another incoming call for the same EAZ arrives, which does not match
|
||||
a network interface, the first tty gets a "RING" and so on.
|
||||
As soon as voice gets supported (with the availability of the Diehl-driver),
|
||||
the service-identifier will be evaluated in addition.
|
||||
|
||||
2 System prerequisites:
|
||||
|
||||
|
|
Loading…
Reference in New Issue