Fixed typos.
This commit is contained in:
parent
71e743aa11
commit
81a3c635ef
|
@ -106,6 +106,7 @@ README for the ISDN-subsystem
|
|||
driver may not be selected (see "Automatic
|
||||
Assignment") however the size of outgoing packets
|
||||
will be limited correctly.
|
||||
AT&D0 Ignore DTR
|
||||
AT&D2 DTR-low-edge: Hang up and return to
|
||||
command mode (default).
|
||||
AT&D3 Same as AT&D2 but also resets all registers.
|
||||
|
@ -157,10 +158,10 @@ README for the ISDN-subsystem
|
|||
1 = DCD follows carrier.
|
||||
Bit 4 0 = CTS follows RTS
|
||||
1 = Ignore RTS, CTS always on.
|
||||
Bit 5 0 = Low-edge on DTR: Hang up and
|
||||
return to command mode.
|
||||
Bit 5 0 = return to command mode on DTR low.
|
||||
1 = Same as 0 but also resets all
|
||||
registers.
|
||||
See also register 13, bit 2
|
||||
Bit 6 0 = DSR always on.
|
||||
1 = DSR only on if channel is available.
|
||||
Bit 7 0 = Cisco-PPP-flag-hack off (default).
|
||||
|
@ -170,6 +171,8 @@ README for the ISDN-subsystem
|
|||
1 = Direct tty-send.
|
||||
Bit 1: 0 = T.70 protocol (Only for BTX!) off
|
||||
1 = T.70 protocol (Only for BTX!) on
|
||||
Bit 2: 0 = Don't hangup on DTR low.
|
||||
1 = Hangup on DTR low.
|
||||
14 0 Layer-2 protocol:
|
||||
0 = X75/LAPB with I-frames
|
||||
1 = X75/LAPB with UI-frames
|
||||
|
@ -192,7 +195,7 @@ README for the ISDN-subsystem
|
|||
Layer-2-protocol is automatically
|
||||
changed to 4 regardless of the setting
|
||||
of register 14. On outgoing calls,
|
||||
the most significant 1-bit is choosen to
|
||||
the most significant 1-bit is chosen to
|
||||
select the outgoing service octet.
|
||||
19 0 Service-Octet-2
|
||||
20 0 Bit coded register (readonly)
|
||||
|
|
|
@ -8,7 +8,7 @@ Obere Heerbergstr. 17
|
|||
Tel: +49 931 2877950
|
||||
Fax: +49 931 2877951
|
||||
|
||||
email uhl@think.de
|
||||
email info@think.de
|
||||
WWW http:/www.think.de
|
||||
|
||||
|
||||
|
|
|
@ -6,7 +6,7 @@ Q02: error message "this systems lacks PPP support"
|
|||
Q03: strange information using 'ifconfig'
|
||||
Q04: MPPP?? What's that and how can I use it ...
|
||||
Q05: I tried MPPP but it doesn't work
|
||||
Q06: can I use asynchronous PPP encapuslation with network devices
|
||||
Q06: can I use asynchronous PPP encapsulation with network devices
|
||||
Q07: A SunISDN machine can't connect to my i4l system
|
||||
Q08: I wanna talk to several machines, which need different configs
|
||||
Q09: Starting the ipppd, I get only error messages from i4l
|
||||
|
@ -18,7 +18,7 @@ Q12: How can I reduce login delay?
|
|||
|
||||
Q01: pppd,ipppd, syncPPP , asyncPPP .. what is that ?
|
||||
what should I use?
|
||||
A: The pppd is for asynchronous PPP .. asynchron means
|
||||
A: The pppd is for asynchronous PPP .. asynchronous means
|
||||
here, the framing is character based. (e.g when
|
||||
using ttyI* or tty* devices)
|
||||
|
||||
|
@ -27,7 +27,7 @@ A: The pppd is for asynchronous PPP .. asynchron means
|
|||
in isdn4linux pushes all IP packets direct
|
||||
to the network layer and all PPP protocol
|
||||
frames to the /dev/ippp* device.
|
||||
So, the ipppd is a simple externel network
|
||||
So, the ipppd is a simple external network
|
||||
protocol handler.
|
||||
|
||||
If you login into a remote machine using the
|
||||
|
@ -39,7 +39,7 @@ A: The pppd is for asynchronous PPP .. asynchron means
|
|||
syncPPP machine .. use the network device part
|
||||
of isdn4linux with the 'syncppp' encapsulation
|
||||
and make sure, that the ipppd is running and
|
||||
conneted to at least one /dev/ippp*. Check the
|
||||
connected to at least one /dev/ippp*. Check the
|
||||
isdn4linux manual on how to configure a network device.
|
||||
|
||||
--
|
||||
|
@ -79,12 +79,12 @@ A: MPPP or MP or MPP (Warning: MP is also an
|
|||
every additional channel. (see the i4l manual
|
||||
for more)
|
||||
To use channel bundling you must first activate
|
||||
the 'master' or inital call. Now you can add
|
||||
the 'master' or initial call. Now you can add
|
||||
the slave channels with the command:
|
||||
isdnctrl addlink <device>
|
||||
e.g:
|
||||
isdnctrl addlink ippp0
|
||||
This is different to other encapsualtions of
|
||||
This is different from other encapsulations of
|
||||
isdn4linux! With syncPPP, there is no automatic
|
||||
activation of slave devices.
|
||||
|
||||
|
@ -100,7 +100,7 @@ A: you forgot to compile MPPP/RFC1717 support into the
|
|||
|
||||
--
|
||||
|
||||
Q06: can I use asynchronous PPP encapuslation
|
||||
Q06: can I use asynchronous PPP encapsulation
|
||||
over the network interface of isdn4linux ..
|
||||
|
||||
A: No .. that's not possible .. Use the standard
|
||||
|
@ -131,7 +131,7 @@ Q08: A wanna talk to remote machines, which need
|
|||
|
||||
A: you must bind a network interface explicitly to
|
||||
an ippp device, where you can connect a (for this
|
||||
interface) individualy configured ipppd.
|
||||
interface) individually configured ipppd.
|
||||
|
||||
--
|
||||
|
||||
|
@ -171,7 +171,7 @@ A: You must know, how the ipppd gets the addresses it wanna
|
|||
tries to negotiate the local host address!
|
||||
With the option 'noipdefault' it requests an address
|
||||
from the remote machine. With 'useifip' it gets the
|
||||
addresses from the net interface. Or you set the addresse
|
||||
addresses from the net interface. Or you set the address
|
||||
on the option line with the <a.b.c.d:e.f.g.h> option.
|
||||
Note: the IP address of the remote machine must be configured
|
||||
locally or the remote machine must send it in an IPCP request.
|
||||
|
@ -205,7 +205,7 @@ A: A good help log is the debug output from the ipppd...
|
|||
- there are at least a few RECV messages in the log:
|
||||
-> fine: your card is dialing and your remote machine
|
||||
tries to talk with you. Maybe only a missing
|
||||
authentification. Check your ipppd configuration again.
|
||||
authentication. Check your ipppd configuration again.
|
||||
- the ipppd exits for some reason:
|
||||
-> not good ... check /var/adm/syslog and /var/adm/daemon.
|
||||
Could be a bug in the ipppd.
|
||||
|
|
|
@ -19,9 +19,13 @@
|
|||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*
|
||||
* $Log$
|
||||
* Revision 1.22 1996/05/17 15:46:41 fritz
|
||||
* Removed own queue management.
|
||||
* Changed queue management to use sk_buffs.
|
||||
*
|
||||
* Revision 1.21 1996/05/02 04:01:20 fritz
|
||||
* Bugfix:
|
||||
* - icn_addcard() evalueated wrong driverId.
|
||||
* - icn_addcard() evaluated wrong driverId.
|
||||
*
|
||||
* Revision 1.20 1996/05/02 00:40:27 fritz
|
||||
* Major rewrite to support more than one card
|
||||
|
@ -269,7 +273,7 @@ static inline int icn_trymaplock_channel(icn_card *card, int channel)
|
|||
}
|
||||
|
||||
/*
|
||||
* Release currend card/channel lock,
|
||||
* Release current card/channel lock,
|
||||
* then map same or other channel without locking.
|
||||
*/
|
||||
static inline void icn_maprelease_channel(icn_card *card, int channel)
|
||||
|
|
|
@ -1,6 +1,9 @@
|
|||
/* $Id$
|
||||
*
|
||||
* $Log$
|
||||
* Revision 1.6 1996/05/21 11:33:50 keil
|
||||
* Adding SETUP_ACKNOWLEGDE as answer of a SETUP message.
|
||||
*
|
||||
* Revision 1.5 1996/05/18 01:37:16 fritz
|
||||
* Added spelling corrections and some minor changes
|
||||
* to stay in sync with kernel.
|
||||
|
@ -572,7 +575,7 @@ l3down(struct PStack *st,
|
|||
break;
|
||||
if (i == downsllen) {
|
||||
if (DEBUG_1TR6 > 0) {
|
||||
printk(KERN_INFO "isdnl3down unhandled E-DSS1 state %d primitiv %x\n", st->l3.state, pr);
|
||||
printk(KERN_INFO "isdnl3down unhandled E-DSS1 state %d primitive %x\n", st->l3.state, pr);
|
||||
}
|
||||
} else
|
||||
downstatelist[i].rout(st, pr, ibh);
|
||||
|
|
|
@ -1,11 +1,14 @@
|
|||
/* $Id$
|
||||
*
|
||||
* $Log$
|
||||
* Revision 1.5 1996/05/31 00:58:47 fritz
|
||||
* Errata: Reverted change from rev 1.4.
|
||||
*
|
||||
* Revision 1.4 1996/05/26 14:59:57 fritz
|
||||
* Bugfix: maxbufsize had been set without respect to possible X.75 header.
|
||||
*
|
||||
* Revision 1.3 1996/05/01 14:19:57 fritz
|
||||
* Added ISDN_FEADTURE_L2_TRANS
|
||||
* Added ISDN_FEATURE_L2_TRANS
|
||||
*
|
||||
* Revision 1.2 1996/04/29 23:01:46 fritz
|
||||
* Added driverId and channel to readstatus().
|
||||
|
|
|
@ -14,6 +14,9 @@
|
|||
*
|
||||
*
|
||||
* $Log$
|
||||
* Revision 1.4 1996/05/17 03:46:17 fritz
|
||||
* General cleanup.
|
||||
*
|
||||
* Revision 1.3 1996/04/30 22:06:50 isdn4dev
|
||||
* logging 1TR6 messages correctly Karsten Keil
|
||||
*
|
||||
|
@ -227,7 +230,7 @@ struct MessageType mt_n1[] =
|
|||
{MT_N1_FAC_CAN, "FACility CANcel"},
|
||||
{MT_N1_FAC_REG, "FACility REGister"},
|
||||
{MT_N1_FAC_REJ, "FACility REJect"},
|
||||
{MT_N1_INFO, "INFOmation"},
|
||||
{MT_N1_INFO, "INFOrmation"},
|
||||
{MT_N1_REG_ACK, "REGister ACKnowledge"},
|
||||
{MT_N1_REG_REJ, "REGister REJect"},
|
||||
{MT_N1_STAT, "STATus"}
|
||||
|
|
|
@ -21,6 +21,9 @@
|
|||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*
|
||||
* $Log$
|
||||
* Revision 1.11 1996/05/31 01:37:47 fritz
|
||||
* Minor changes, due to changes in isdn_tty.c
|
||||
*
|
||||
* Revision 1.10 1996/05/18 01:37:18 fritz
|
||||
* Added spelling corrections and some minor changes
|
||||
* to stay in sync with kernel.
|
||||
|
@ -29,7 +32,7 @@
|
|||
* Added flags for DLE handling.
|
||||
*
|
||||
* Revision 1.8 1996/05/11 21:49:55 fritz
|
||||
* Removed queue mamagement variables.
|
||||
* Removed queue management variables.
|
||||
* Changed queue management to use sk_buffs.
|
||||
*
|
||||
* Revision 1.7 1996/05/07 09:10:06 fritz
|
||||
|
|
Loading…
Reference in New Issue