Taken under CVS-control.

drivers/isdn/icn/Makefile.kernel

@@ -0,0 +1,11 @@
+L_OBJS :=
+M_OBJS :=
+
+ifeq ($(CONFIG_ISDN_DRV_ICN),y)
+  L_OBJS += icn.o
+else
+  M_OBJS += icn.o
+endif
+
+include $(TOPDIR)/Rules.make
+

drivers/isdn/kdebug.h

@@ -0,0 +1,142 @@
+/* $Id$
+ *
+ * Debugging utilities for Linux
+ *
+ * For debugging, include this file. If included more than once
+ * in a multi-module driver, exactly one include-statement should
+ * be preceeded by a #define KDBUG_DEF.
+ *
+ * What does this?:
+ *   Main purpose is to realize a way of logging, even if interrupts
+ *   are disabled. To work on virtual-screens with a screen-width other
+ *   than 80, change the LINEWIDTH below.#
+ *
+ * Functionality:
+ *
+ *  -cli(), sti() and restore_flags() are redefined. Every time, cli()
+ *   is called, the filename and linenumber of the caller is printed
+ *   on the console, preceeded by a "!". Once interrupts are enabled
+ *   again, - either with sti() or restore_flags() - the exclamation
+ *   mark is replaced by a blank.
+ *
+ *  -Wrapper-Macro for function calls. CTR(myfunc(a,b,c)) prints
+ *   "Enter myfunc(...)", then executes the call, then prints
+ *   "Leave myfunc(...)". Screenposition is 40,0.
+ *
+ *  -Generic counter macros. DBGCNTDEF(n,x,y); Defines counter nr. n
+ *   to be shown at screen-position x,y. DBGCNTINC(n); increments
+ *   counter n.
+ *
+ *  -An "i-am-alive" rotating bar. wheel(x,y) rotates a bar at
+ *   position x,y.
+ *
+ * $Log$
+ *
+ */
+
+#ifndef _kdebug_h_
+#define _kdebug_h_
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+#define LINEWIDTH 80
+
+extern unsigned short *screen_pos(int, int, int);
+extern int fg_console;
+
+#ifdef KDEBUG_DEF
+unsigned short *scrpos;
+int dbg_cnt_v[10];
+int dbg_cnt_x[10];
+int dbg_cnt_y[10];
+char clibuf[256] = "\0";
+#else
+extern unsigned short *scrpos;
+extern int dbg_cnt_v[10];
+extern int dbg_cnt_x[10];
+extern int dbg_cnt_y[10];
+extern char clibuf[256];
+#endif
+
+static __inline__ void put_ch(const char c) {
+  *scrpos++ = 0x0700+c;
+}
+
+static __inline__ void put_str(char *s) {
+  for (;*s;put_ch(*s++)) ;
+}
+
+static __inline__ void gotovid(int x, int y) {
+  scrpos = screen_pos(fg_console,(y*LINEWIDTH)+x,1);
+}
+
+static __inline__ void gput_str(char *s, int x, int y) {
+  gotovid(x,y);
+  put_str(s);
+}
+
+static __inline__ void gput_ch(char c, int x, int y) {
+  gotovid(x,y);
+  put_ch(c);
+}
+
+static __inline__ void wheel(int x, int y) {
+  gotovid(x,y);
+  switch ((char)(*scrpos & 0xff)) {
+    case '/':
+      *scrpos = 0x700+'-';
+      break;
+    case '-':
+      *scrpos = 0x700+'\\';
+      break;
+    case '\\':
+      *scrpos = 0x700+'|';
+      break;
+    default:
+      *scrpos = 0x700+'/';
+  }
+}
+
+#undef cli
+#define cli() { \
+  __asm__ __volatile__ ("cli": : :"memory"); \
+  sprintf(clibuf,"!%-20s %04d !",__BASE_FILE__,__LINE__); \
+  gput_str(clibuf,0,0); \
+}
+
+#undef restore_flags
+#define restore_flags(x) { \
+  if (x & 0x200) gput_ch(' ',0,0); \
+  __asm__ __volatile__("pushl %0 ; popfl": /* no output */ :"r" (x):"memory"); \
+}
+
+#undef sti
+#define sti() { \
+  gput_ch(' ',0,0); \
+  __asm__ __volatile__ ("sti": : :"memory"); \
+}
+
+#define CTR(x) { \
+  gput_str("Enter " #x " ", 40, 0); \
+  x; \
+  gput_str("Leave " #x " ", 40, 0); \
+}
+
+#define DBGCNTDEF(n,x,y) { \
+  char tmp[10]; \
+  dbg_cnt_v[n] = 0; \
+  dbg_cnt_x[n] = x; \
+  dbg_cnt_y[n] = y; \
+  sprintf(tmp,"%02d",0); \
+  gput_str(tmp,x,y); \
+}
+
+#define DBGCNTINC(i) { \
+  char tmp[10]; \
+  dbg_cnt_v[i]++; \
+  sprintf(tmp,"%02d",dbg_cnt_v[i]); \
+  gput_str(tmp,dbg_cnt_x[i],dbg_cnt_y[i]); \
+}
+
+#endif

drivers/isdn/pcbit/Makefile.kernel

@@ -0,0 +1,15 @@
+L_OBJS :=
+M_OBJS :=
+O_OBJS := module.o edss1.o drv.o layer2.o capi.o callbacks.o 
+
+O_TARGET :=
+ifeq ($(CONFIG_ISDN_DRV_PCBIT),y)
+  O_TARGET += pcbit.o
+else
+  ifeq ($(CONFIG_ISDN_DRV_PCBIT),m)
+    O_TARGET += pcbit.o
+    M_OBJS += pcbit.o
+  endif
+endif
+
+include $(TOPDIR)/Rules.make