isdn4linux/drivers/isdn/isdn_tty.c

3336 lines
80 KiB
C
Raw Normal View History

1996-01-09 04:13:18 +00:00
/* $Id$
1996-01-09 04:13:18 +00:00
* Linux ISDN subsystem, tty functions and AT-command emulator (linklevel).
*
1996-01-22 05:12:25 +00:00
* Copyright 1994,95,96 by Fritz Elfert (fritz@wuemaus.franken.de)
* Copyright 1995,96 by Thinking Objects Software GmbH Wuerzburg
*
1996-01-09 04:13:18 +00:00
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
1996-01-09 04:13:18 +00:00
*
* $Log$
* Revision 1.36 1997/03/04 21:41:55 fritz
* Fix: Excessive stack usage of isdn_tty_senddown()
* and isdn_tty_end_vrx() could lead to problems.
*
* Revision 1.35 1997/03/02 19:05:52 fritz
* Bugfix: Avoid recursion.
*
1997-03-02 19:05:52 +00:00
* Revision 1.34 1997/03/02 14:29:22 fritz
* More ttyI related cleanup.
*
1997-03-02 14:29:26 +00:00
* Revision 1.33 1997/02/28 02:32:45 fritz
* Cleanup: Moved some tty related stuff from isdn_common.c
* to isdn_tty.c
* Bugfix: Bisync protocol did not behave like documented.
*
* Revision 1.32 1997/02/23 15:43:03 fritz
* Small change in handling of incoming calls
* documented in newest version of ttyI.4
*
* Revision 1.31 1997/02/21 13:05:57 fritz
* Bugfix: Remote hangup did not set location-info on ttyI's
*
* Revision 1.30 1997/02/18 09:41:05 fritz
* Added support for bitwise access to modem registers (ATSx.y=n, ATSx.y?).
* Beautified output of AT&V.
*
* Revision 1.29 1997/02/16 12:11:51 fritz
* Added S13,Bit4 option.
*
1997-02-16 12:11:59 +00:00
* Revision 1.28 1997/02/10 22:07:08 fritz
* Added 2 modem registers for numbering plan and screening info.
*
* Revision 1.27 1997/02/10 21:31:14 fritz
* Changed setup-interface (incoming and outgoing).
*
* Revision 1.26 1997/02/10 20:12:48 fritz
* Changed interface for reporting incoming calls.
*
* Revision 1.25 1997/02/03 23:04:30 fritz
* Reformatted according CodingStyle.
* skb->free stuff replaced by macro.
* Finished full-duplex audio.
*
* Revision 1.24 1997/01/14 01:32:42 fritz
* Changed audio receive not to rely on skb->users and skb->lock.
* Added ATI2 and related variables.
* Started adding full-duplex audio capability.
*
* Revision 1.23 1996/10/22 23:14:02 fritz
* Changes for compatibility to 2.0.X and 2.1.X kernels.
*
* Revision 1.22 1996/10/19 18:56:43 fritz
* ATZ did not change the xmitbuf size.
*
1996-10-19 18:56:43 +00:00
* Revision 1.21 1996/06/24 17:40:28 fritz
* Bugfix: Did not compile without CONFIG_ISDN_AUDIO
*
* Revision 1.20 1996/06/15 14:59:39 fritz
* Fixed isdn_tty_tint() to handle partially sent
* sk_buffs.
*
* Revision 1.19 1996/06/12 15:53:56 fritz
* Bugfix: AT+VTX and AT+VRX could be executed without
* having a connection.
* Missing check for NULL tty in isdn_tty_flush_buffer().
*
* Revision 1.18 1996/06/07 11:17:33 tsbogend
* added missing #ifdef CONFIG_ISDN_AUDIO to make compiling without
* audio support possible
*
* Revision 1.17 1996/06/06 14:55:47 fritz
* Changed to support DTMF decoding on audio playback also.
* Bugfix: Added check for invalid info->isdn_driver in
* isdn_tty_senddown().
* Clear ncarrier flag on last close() of a tty.
*
* Revision 1.16 1996/06/05 02:24:12 fritz
* Added DTMF decoder for audio mode.
*
1996-06-05 02:24:12 +00:00
* Revision 1.15 1996/06/03 20:35:01 fritz
* Fixed typos.
*
1996-06-03 20:35:04 +00:00
* Revision 1.14 1996/06/03 20:12:19 fritz
* Fixed typos.
* Added call to write_wakeup via isdn_tty_flush_buffer()
* in isdn_tty_modem_hup().
*
* Revision 1.13 1996/05/31 01:33:29 fritz
* Changed buffering due to bad performance with mgetty.
* Now sk_buff is delayed allocated in isdn_tty_senddown
* using xmit_buff like in standard serial driver.
* Fixed module locking.
* Added DLE-DC4 handling in voice mode.
*
* Revision 1.12 1996/05/19 01:34:40 fritz
* Bugfix: ATS returned error.
* Register 20 made readonly.
*
* Revision 1.11 1996/05/18 01:37:03 fritz
* Added spelling corrections and some minor changes
* to stay in sync with kernel.
*
* Revision 1.10 1996/05/17 03:51:49 fritz
* Changed DLE handling for audio receive.
*
* Revision 1.9 1996/05/11 21:52:07 fritz
* Changed queue management to use sk_buffs.
*
* Revision 1.8 1996/05/10 08:49:43 fritz
* Checkin before major changes of tty-code.
*
* Revision 1.7 1996/05/07 09:15:09 fritz
* Reorganized and general cleanup.
* Bugfixes:
* - Audio-transmit working now.
* - "NO CARRIER" now reported, when hanging up with DTR low.
* - Corrected CTS handling.
*
* Revision 1.6 1996/05/02 03:59:25 fritz
* Bugfixes:
* - On dialout, layer-2 setup had been incomplete
* when using new auto-layer2 feature.
* - On hangup, "NO CARRIER" message sometimes missing.
*
* Revision 1.5 1996/04/30 21:05:25 fritz
* Test commit
*
1996-04-30 21:05:27 +00:00
* Revision 1.4 1996/04/20 16:39:54 fritz
* Changed all io to go through generic routines in isdn_common.c
* Fixed a real ugly bug in modem-emulator: 'ATA' had been accepted
* even when a call has been cancelled from the remote machine.
*
* Revision 1.3 1996/02/11 02:12:32 fritz
* Bugfixes according to similar fixes in standard serial.c of kernel.
*
* Revision 1.2 1996/01/22 05:12:25 fritz
* replaced my_atoi by simple_strtoul
*
1996-01-22 05:12:25 +00:00
* Revision 1.1 1996/01/09 04:13:18 fritz
* Initial revision
*
1996-01-09 04:13:18 +00:00
*/
1996-01-22 05:12:25 +00:00
#define __NO_VERSION__
#include <linux/config.h>
1996-01-22 05:12:25 +00:00
#include <linux/module.h>
1996-01-09 04:13:18 +00:00
#include <linux/isdn.h>
#include "isdn_common.h"
1996-01-22 05:12:25 +00:00
#include "isdn_tty.h"
1996-04-30 21:05:27 +00:00
#ifdef CONFIG_ISDN_AUDIO
#include "isdn_audio.h"
#define VBUF 0x3e0
#define VBUFX (VBUF/16)
1996-04-30 21:05:27 +00:00
#endif
1996-01-09 04:13:18 +00:00
/* Prototypes */
static int isdn_tty_edit_at(const char *, int, modem_info *, int);
1996-01-09 04:13:18 +00:00
static void isdn_tty_check_esc(const u_char *, u_char, int, int *, int *, int);
1996-10-19 18:56:43 +00:00
static void isdn_tty_modem_reset_regs(modem_info *, int);
static void isdn_tty_cmd_ATA(modem_info *);
1996-04-30 21:05:27 +00:00
static void isdn_tty_at_cout(char *, modem_info *);
1996-06-05 02:24:12 +00:00
static void isdn_tty_flush_buffer(struct tty_struct *);
static void isdn_tty_modem_result(int, modem_info *);
1997-03-02 14:29:26 +00:00
#ifdef CONFIG_ISDN_AUDIO
static int isdn_tty_countDLE(unsigned char *, int);
#endif
1996-01-09 04:13:18 +00:00
/* Leave this unchanged unless you know what you do! */
#define MODEM_PARANOIA_CHECK
#define MODEM_DO_RESTART
static char *isdn_ttyname_ttyI = "ttyI";
static char *isdn_ttyname_cui = "cui";
static int bit2si[8] =
{1, 5, 7, 7, 7, 7, 7, 7};
static int si2bit[8] =
{4, 1, 4, 4, 4, 4, 4, 4};
char *isdn_tty_revision = "$Revision$";
1996-01-09 04:13:18 +00:00
#define DLE 0x10
#define ETX 0x03
#define DC4 0x14
1997-03-02 14:29:26 +00:00
/* isdn_tty_try_read() is called from within isdn_tty_rcv_skb()
* to stuff incoming data directly into a tty's flip-buffer. This
* is done to speed up tty-receiving if the receive-queue is empty.
* This routine MUST be called with interrupts off.
* Return:
* 1 = Success
* 0 = Failure, data has to be buffered and later processed by
* isdn_tty_readmodem().
*/
1997-03-02 14:29:26 +00:00
static int
isdn_tty_try_read(modem_info * info, struct sk_buff *skb)
1996-01-09 04:13:18 +00:00
{
int c;
int len;
struct tty_struct *tty;
1996-01-09 04:13:18 +00:00
if (info->online) {
if ((tty = info->tty)) {
if (info->mcr & UART_MCR_RTS) {
c = TTY_FLIPBUF_SIZE - tty->flip.count;
len = skb->len
#ifdef CONFIG_ISDN_AUDIO
+ ISDN_AUDIO_SKB_DLECOUNT(skb)
#endif
;
if (c >= len) {
#ifdef CONFIG_ISDN_AUDIO
if (ISDN_AUDIO_SKB_DLECOUNT(skb))
while (skb->len--) {
if (*skb->data == DLE)
tty_insert_flip_char(tty, DLE, 0);
tty_insert_flip_char(tty, *skb->data++, 0);
} else {
#endif
memcpy(tty->flip.char_buf_ptr,
skb->data, len);
tty->flip.count += len;
tty->flip.char_buf_ptr += len;
memset(tty->flip.flag_buf_ptr, 0, len);
tty->flip.flag_buf_ptr += len;
#ifdef CONFIG_ISDN_AUDIO
}
#endif
if (info->emu.mdmreg[12] & 128)
tty->flip.flag_buf_ptr[len - 1] = 0xff;
1996-01-09 04:13:18 +00:00
queue_task_irq_off(&tty->flip.tqueue, &tq_timer);
SET_SKB_FREE(skb);
kfree_skb(skb, FREE_READ);
1996-01-09 04:13:18 +00:00
return 1;
}
}
}
}
return 0;
}
/* isdn_tty_readmodem() is called periodically from within timer-interrupt.
* It tries getting received data from the receive queue an stuff it into
* the tty's flip-buffer.
*/
void
isdn_tty_readmodem(void)
1996-01-09 04:13:18 +00:00
{
int resched = 0;
int midx;
int i;
int c;
int r;
ulong flags;
struct tty_struct *tty;
modem_info *info;
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
if ((midx = dev->m_idx[i]) >= 0) {
info = &dev->mdm.info[midx];
if (info->online) {
1996-01-09 04:13:18 +00:00
r = 0;
#ifdef CONFIG_ISDN_AUDIO
1996-06-05 02:24:12 +00:00
isdn_audio_eval_dtmf(info);
#endif
1996-01-09 04:13:18 +00:00
if ((tty = info->tty)) {
if (info->mcr & UART_MCR_RTS) {
c = TTY_FLIPBUF_SIZE - tty->flip.count;
1996-01-09 04:13:18 +00:00
if (c > 0) {
save_flags(flags);
cli();
1996-01-09 04:13:18 +00:00
r = isdn_readbchan(info->isdn_driver, info->isdn_channel,
tty->flip.char_buf_ptr,
tty->flip.flag_buf_ptr, c, 0);
/* CISCO AsyncPPP Hack */
if (!(info->emu.mdmreg[12] & 128))
1996-01-09 04:13:18 +00:00
memset(tty->flip.flag_buf_ptr, 0, r);
tty->flip.count += r;
tty->flip.flag_buf_ptr += r;
tty->flip.char_buf_ptr += r;
if (r)
queue_task_irq_off(&tty->flip.tqueue, &tq_timer);
restore_flags(flags);
1996-01-09 04:13:18 +00:00
}
} else
r = 1;
} else
r = 1;
if (r) {
info->rcvsched = 0;
1996-01-09 04:13:18 +00:00
resched = 1;
} else
info->rcvsched = 1;
1996-01-09 04:13:18 +00:00
}
}
1996-01-09 04:13:18 +00:00
}
if (!resched)
isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 0);
}
1997-03-02 14:29:26 +00:00
int
isdn_tty_rcv_skb(int i, int di, int channel, struct sk_buff *skb)
{
ulong flags;
int midx;
#ifdef CONFIG_ISDN_AUDIO
int ifmt;
#endif
modem_info *info;
if ((midx = dev->m_idx[i]) < 0) {
/* if midx is invalid, packet is not for tty */
return 0;
}
info = &dev->mdm.info[midx];
#ifdef CONFIG_ISDN_AUDIO
ifmt = 1;
if (info->vonline)
isdn_audio_calc_dtmf(info, skb->data, skb->len, ifmt);
#endif
if ((info->online < 2)
#ifdef CONFIG_ISDN_AUDIO
&& (!(info->vonline & 1))
#endif
) {
1997-03-02 14:29:26 +00:00
/* If Modem not listening, drop data */
SET_SKB_FREE(skb);
kfree_skb(skb, FREE_READ);
1997-03-02 14:29:26 +00:00
return 1;
}
if (info->emu.mdmreg[13] & 2)
/* T.70 decoding: Simply throw away the T.70 header (4 bytes) */
if ((skb->data[0] == 1) && ((skb->data[1] == 0) || (skb->data[1] == 1)))
skb_pull(skb, 4);
#ifdef CONFIG_ISDN_AUDIO
1997-03-02 14:29:26 +00:00
if (skb_headroom(skb) < sizeof(isdn_audio_skb)) {
printk(KERN_WARNING
"isdn_audio: insufficient skb_headroom, dropping\n");
SET_SKB_FREE(skb);
kfree_skb(skb, FREE_READ);
1997-03-02 14:29:26 +00:00
return 1;
}
ISDN_AUDIO_SKB_DLECOUNT(skb) = 0;
ISDN_AUDIO_SKB_LOCK(skb) = 0;
if (info->vonline & 1) {
/* voice conversion/compression */
switch (info->emu.vpar[3]) {
case 2:
case 3:
case 4:
/* adpcm
* Since compressed data takes less
* space, we can overwrite the buffer.
*/
skb_trim(skb, isdn_audio_xlaw2adpcm(info->adpcmr,
ifmt,
skb->data,
skb->data,
skb->len));
break;
case 5:
/* a-law */
if (!ifmt)
isdn_audio_ulaw2alaw(skb->data, skb->len);
break;
case 6:
/* u-law */
if (ifmt)
isdn_audio_alaw2ulaw(skb->data, skb->len);
break;
}
ISDN_AUDIO_SKB_DLECOUNT(skb) =
isdn_tty_countDLE(skb->data, skb->len);
}
#endif
/* Try to deliver directly via tty-flip-buf if queue is empty */
save_flags(flags);
cli();
if (skb_queue_empty(&dev->drv[di]->rpqueue[channel]))
if (isdn_tty_try_read(info, skb)) {
restore_flags(flags);
return 1;
}
/* Direct deliver failed or queue wasn't empty.
* Queue up for later dequeueing via timer-irq.
*/
__skb_queue_tail(&dev->drv[di]->rpqueue[channel], skb);
dev->drv[di]->rcvcount[channel] +=
(skb->len
#ifdef CONFIG_ISDN_AUDIO
+ ISDN_AUDIO_SKB_DLECOUNT(skb)
#endif
);
1997-03-02 14:29:26 +00:00
restore_flags(flags);
/* Schedule dequeuing */
if ((dev->modempoll) && (info->rcvsched))
isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1);
return 1;
}
void
isdn_tty_cleanup_xmit(modem_info * info)
{
struct sk_buff *skb;
unsigned long flags;
save_flags(flags);
cli();
if (skb_queue_len(&info->xmit_queue))
while ((skb = skb_dequeue(&info->xmit_queue))) {
SET_SKB_FREE(skb);
kfree_skb(skb, FREE_WRITE);
}
#ifdef CONFIG_ISDN_AUDIO
if (skb_queue_len(&info->dtmf_queue))
while ((skb = skb_dequeue(&info->dtmf_queue))) {
SET_SKB_FREE(skb);
kfree_skb(skb, FREE_WRITE);
}
#endif
restore_flags(flags);
}
static void
isdn_tty_tint(modem_info * info)
1996-04-30 21:05:27 +00:00
{
struct sk_buff *skb = skb_dequeue(&info->xmit_queue);
int len,
slen;
if (!skb)
return;
len = skb->len;
if ((slen = isdn_writebuf_skb_stub(info->isdn_driver,
info->isdn_channel, skb)) == len) {
struct tty_struct *tty = info->tty;
info->send_outstanding++;
info->msr |= UART_MSR_CTS;
info->lsr |= UART_LSR_TEMT;
if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
tty->ldisc.write_wakeup)
(tty->ldisc.write_wakeup) (tty);
wake_up_interruptible(&tty->write_wait);
return;
}
if (slen < 0) {
/* Error: no channel, already shutdown, or wrong parameter */
SET_SKB_FREE(skb);
dev_kfree_skb(skb, FREE_WRITE);
return;
}
if (slen)
skb_pull(skb, slen);
skb_queue_head(&info->xmit_queue, skb);
}
1996-04-30 21:05:27 +00:00
#ifdef CONFIG_ISDN_AUDIO
1997-03-02 14:29:26 +00:00
static int
isdn_tty_countDLE(unsigned char *buf, int len)
{
int count = 0;
while (len--)
if (*buf++ == DLE)
count++;
return count;
}
/* This routine is called from within isdn_tty_write() to perform
* DLE-decoding when sending audio-data.
*/
static int
isdn_tty_handleDLEdown(modem_info * info, atemu * m, int len)
{
unsigned char *p = &info->xmit_buf[info->xmit_count];
int count = 0;
while (len > 0) {
if (m->lastDLE) {
m->lastDLE = 0;
switch (*p) {
case DLE:
/* Escape code */
if (len > 1)
memmove(p, p + 1, len - 1);
p--;
count++;
break;
case ETX:
/* End of data */
info->vonline |= 4;
return count;
case DC4:
/* Abort RX */
info->vonline &= ~1;
#ifdef ISDN_DEBUG_MODEM_VOICE
printk(KERN_DEBUG
"DLEdown: got DLE-DC4, send DLE-ETX on ttyI%d\n",
info->line);
#endif
isdn_tty_at_cout("\020\003", info);
if (!info->vonline) {
#ifdef ISDN_DEBUG_MODEM_VOICE
printk(KERN_DEBUG
"DLEdown: send VCON on ttyI%d\n",
info->line);
#endif
isdn_tty_at_cout("\r\nVCON\r\n", info);
}
/* Fall through */
case 'q':
case 's':
/* Silence */
if (len > 1)
memmove(p, p + 1, len - 1);
p--;
break;
}
} else {
if (*p == DLE)
m->lastDLE = 1;
else
count++;
}
p++;
len--;
}
if (len < 0) {
printk(KERN_WARNING "isdn_tty: len<0 in DLEdown\n");
return 0;
}
return count;
}
/* This routine is called from within isdn_tty_write() when receiving
* audio-data. It interrupts receiving, if an character other than
* ^S or ^Q is sent.
*/
static int
isdn_tty_end_vrx(const char *buf, int c, int from_user)
{
char ch;
while (c--) {
if (from_user)
GET_USER(ch, buf);
else
ch = *buf;
if ((ch != 0x11) && (ch != 0x13))
return 1;
buf++;
}
return 0;
}
static int voice_cf[7] =
{0, 0, 4, 3, 2, 0, 0};
#endif /* CONFIG_ISDN_AUDIO */
/* isdn_tty_senddown() is called either directly from within isdn_tty_write()
* or via timer-interrupt from within isdn_tty_modem_xmit(). It pulls
* outgoing data from the tty's xmit-buffer, handles voice-decompression or
* T.70 if necessary, and finally queues it up for sending via isdn_tty_tint.
*/
static void
isdn_tty_senddown(modem_info * info)
{
int buflen;
int skb_res;
#ifdef CONFIG_ISDN_AUDIO
int audio_len;
#endif
struct sk_buff *skb;
unsigned long flags;
#ifdef CONFIG_ISDN_AUDIO
if (info->vonline & 4) {
info->vonline &= ~6;
if (!info->vonline) {
#ifdef ISDN_DEBUG_MODEM_VOICE
printk(KERN_DEBUG
"senddown: send VCON on ttyI%d\n",
info->line);
#endif
isdn_tty_at_cout("\r\nVCON\r\n", info);
}
}
#endif
save_flags(flags);
cli();
if (!(buflen = info->xmit_count)) {
restore_flags(flags);
return;
}
if (info->isdn_driver < 0) {
info->xmit_count = 0;
restore_flags(flags);
return;
}
skb_res = dev->drv[info->isdn_driver]->interface->hl_hdrlen + 4;
#ifdef CONFIG_ISDN_AUDIO
if (info->vonline & 2)
audio_len = buflen * voice_cf[info->emu.vpar[3]];
else
audio_len = 0;
skb = dev_alloc_skb(skb_res + buflen + audio_len);
#else
skb = dev_alloc_skb(skb_res + buflen);
#endif
if (!skb) {
restore_flags(flags);
printk(KERN_WARNING
"isdn_tty: Out of memory in ttyI%d senddown\n",
info->line);
return;
}
skb_reserve(skb, skb_res);
memcpy(skb_put(skb, buflen), info->xmit_buf, buflen);
info->xmit_count = 0;
restore_flags(flags);
#ifdef CONFIG_ISDN_AUDIO
if (info->vonline & 2) {
/* For now, ifmt is fixed to 1 (alaw), since this
* is used with ISDN everywhere in the world, except
* US, Canada and Japan.
* Later, when US-ISDN protocols are implemented,
* this setting will depend on the D-channel protocol.
*/
int ifmt = 1;
/* voice conversion/decompression */
switch (info->emu.vpar[3]) {
case 2:
case 3:
case 4:
/* adpcm, compatible to ZyXel 1496 modem
* with ROM revision 6.01
*/
skb_trim(skb,
isdn_audio_adpcm2xlaw(info->adpcms,
ifmt,
skb->data,
skb_put(skb, audio_len),
buflen));
skb_pull(skb, buflen);
break;
case 5:
/* a-law */
if (!ifmt)
isdn_audio_alaw2ulaw(skb->data,
buflen);
break;
case 6:
/* u-law */
if (ifmt)
isdn_audio_ulaw2alaw(skb->data,
buflen);
break;
}
}
#endif /* CONFIG_ISDN_AUDIO */
SET_SKB_FREE(skb);
if (info->emu.mdmreg[13] & 2)
/* Add T.70 simplified header */
memcpy(skb_push(skb, 4), "\1\0\1\0", 4);
skb_queue_tail(&info->xmit_queue, skb);
if ((info->emu.mdmreg[12] & 0x10) != 0)
info->msr &= UART_MSR_CTS;
info->lsr &= UART_LSR_TEMT;
1996-04-30 21:05:27 +00:00
}
1996-01-09 04:13:18 +00:00
/************************************************************
*
* Modem-functions
*
* mostly "stolen" from original Linux-serial.c and friends.
*
************************************************************/
/* The next routine is called once from within timer-interrupt
* triggered within isdn_tty_modem_ncarrier(). It calls
* isdn_tty_modem_result() to stuff a "NO CARRIER" Message
* into the tty's flip-buffer.
*/
static void
isdn_tty_modem_do_ncarrier(unsigned long data)
{
modem_info *info = (modem_info *) data;
isdn_tty_modem_result(3, info);
}
/* Next routine is called, whenever the DTR-signal is raised.
* It checks the ncarrier-flag, and triggers the above routine
* when necessary. The ncarrier-flag is set, whenever DTR goes
* low.
*/
static void
isdn_tty_modem_ncarrier(modem_info * info)
{
if (info->ncarrier) {
info->nc_timer.expires = jiffies + HZ;
info->nc_timer.function = isdn_tty_modem_do_ncarrier;
info->nc_timer.data = (unsigned long) info;
add_timer(&info->nc_timer);
}
}
/* isdn_tty_dial() performs dialing of a tty an the necessary
* setup of the lower levels before that.
*/
static void
isdn_tty_dial(char *n, modem_info * info, atemu * m)
1996-01-09 04:13:18 +00:00
{
int usg = ISDN_USAGE_MODEM;
int si = 7;
int l2 = m->mdmreg[14];
1996-01-09 04:13:18 +00:00
isdn_ctrl cmd;
ulong flags;
int i;
int j;
1996-01-09 04:13:18 +00:00
for (j = 7; j >= 0; j--)
if (m->mdmreg[18] & (1 << j)) {
si = bit2si[j];
break;
}
#ifdef CONFIG_ISDN_AUDIO
if (si == 1) {
l2 = 4;
usg = ISDN_USAGE_VOICE;
}
#endif
m->mdmreg[20] = si2bit[si];
1996-01-09 04:13:18 +00:00
save_flags(flags);
cli();
i = isdn_get_free_channel(usg, l2, m->mdmreg[15], -1, -1);
1996-01-09 04:13:18 +00:00
if (i < 0) {
restore_flags(flags);
isdn_tty_modem_result(6, info);
} else {
info->isdn_driver = dev->drvmap[i];
info->isdn_channel = dev->chanmap[i];
info->drv_index = i;
dev->m_idx[i] = info->line;
dev->usage[i] |= ISDN_USAGE_OUTGOING;
info->last_dir = 1;
strcpy(info->last_num, n);
isdn_info_update();
restore_flags(flags);
cmd.driver = info->isdn_driver;
cmd.arg = info->isdn_channel;
cmd.command = ISDN_CMD_CLREAZ;
dev->drv[info->isdn_driver]->interface->command(&cmd);
strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver));
cmd.driver = info->isdn_driver;
cmd.command = ISDN_CMD_SETEAZ;
dev->drv[info->isdn_driver]->interface->command(&cmd);
cmd.driver = info->isdn_driver;
cmd.command = ISDN_CMD_SETL2;
info->last_l2 = l2;
cmd.arg = info->isdn_channel + (l2 << 8);
dev->drv[info->isdn_driver]->interface->command(&cmd);
cmd.driver = info->isdn_driver;
cmd.command = ISDN_CMD_SETL3;
cmd.arg = info->isdn_channel + (m->mdmreg[15] << 8);
dev->drv[info->isdn_driver]->interface->command(&cmd);
cmd.driver = info->isdn_driver;
cmd.arg = info->isdn_channel;
sprintf(cmd.parm.setup.phone, "%s", n);
sprintf(cmd.parm.setup.eazmsn, "%s",
isdn_map_eaz2msn(m->msn, info->isdn_driver));
cmd.parm.setup.si1 = si;
cmd.parm.setup.si2 = m->mdmreg[19];
cmd.command = ISDN_CMD_DIAL;
info->dialing = 1;
strcpy(dev->num[i], n);
isdn_info_update();
dev->drv[info->isdn_driver]->interface->command(&cmd);
1996-01-09 04:13:18 +00:00
}
}
/* isdn_tty_hangup() disassociates a tty from the real
* ISDN-line (hangup). The usage-status is cleared
* and some cleanup is done also.
*/
static void
isdn_tty_modem_hup(modem_info * info, int local)
1996-01-09 04:13:18 +00:00
{
isdn_ctrl cmd;
int usage;
1996-01-09 04:13:18 +00:00
if (!info)
return;
#ifdef ISDN_DEBUG_MODEM_HUP
printk(KERN_DEBUG "Mhup ttyI%d\n", info->line);
#endif
info->rcvsched = 0;
isdn_tty_flush_buffer(info->tty);
if (info->online) {
info->last_lhup = local;
1997-03-02 19:05:52 +00:00
info->online = 0;
/* NO CARRIER message */
isdn_tty_modem_result(3, info);
}
#ifdef CONFIG_ISDN_AUDIO
info->vonline = 0;
if (info->dtmf_state) {
kfree(info->dtmf_state);
info->dtmf_state = NULL;
}
if (info->adpcms) {
kfree(info->adpcms);
info->adpcms = NULL;
}
if (info->adpcmr) {
kfree(info->adpcmr);
info->adpcmr = NULL;
}
#endif
info->msr &= ~(UART_MSR_DCD | UART_MSR_RI);
info->lsr |= UART_LSR_TEMT;
1996-01-09 04:13:18 +00:00
if (info->isdn_driver >= 0) {
if (local) {
cmd.driver = info->isdn_driver;
cmd.command = ISDN_CMD_HANGUP;
cmd.arg = info->isdn_channel;
dev->drv[info->isdn_driver]->interface->command(&cmd);
}
1996-01-09 04:13:18 +00:00
isdn_all_eaz(info->isdn_driver, info->isdn_channel);
1997-02-16 12:11:59 +00:00
info->emu.mdmreg[1] = 0;
usage = (info->emu.mdmreg[20] == 1) ?
ISDN_USAGE_VOICE : ISDN_USAGE_MODEM;
isdn_free_channel(info->isdn_driver, info->isdn_channel,
usage);
1996-01-09 04:13:18 +00:00
}
info->isdn_driver = -1;
info->isdn_channel = -1;
if (info->drv_index >= 0) {
dev->m_idx[info->drv_index] = -1;
info->drv_index = -1;
}
1996-01-09 04:13:18 +00:00
}
static inline int
isdn_tty_paranoia_check(modem_info * info, kdev_t device, const char *routine)
1996-01-09 04:13:18 +00:00
{
#ifdef MODEM_PARANOIA_CHECK
if (!info) {
printk(KERN_WARNING "isdn_tty: null info_struct for (%d, %d) in %s\n",
1996-01-09 04:13:18 +00:00
MAJOR(device), MINOR(device), routine);
return 1;
}
if (info->magic != ISDN_ASYNC_MAGIC) {
printk(KERN_WARNING "isdn_tty: bad magic for modem struct (%d, %d) in %s\n",
1996-01-09 04:13:18 +00:00
MAJOR(device), MINOR(device), routine);
return 1;
}
#endif
return 0;
}
/*
* This routine is called to set the UART divisor registers to match
* the specified baud rate for a serial port.
*/
static void
isdn_tty_change_speed(modem_info * info)
1996-01-09 04:13:18 +00:00
{
uint cflag,
cval,
fcr,
quot;
1996-01-09 04:13:18 +00:00
int i;
if (!info->tty || !info->tty->termios)
return;
cflag = info->tty->termios->c_cflag;
quot = i = cflag & CBAUD;
if (i & CBAUDEX) {
i &= ~CBAUDEX;
if (i < 1 || i > 2)
info->tty->termios->c_cflag &= ~CBAUDEX;
else
i += 15;
}
if (quot) {
info->mcr |= UART_MCR_DTR;
isdn_tty_modem_ncarrier(info);
1996-01-09 04:13:18 +00:00
} else {
info->mcr &= ~UART_MCR_DTR;
if (info->emu.mdmreg[13] & 4) {
1996-01-09 04:13:18 +00:00
#ifdef ISDN_DEBUG_MODEM_HUP
printk(KERN_DEBUG "Mhup in changespeed\n");
1996-01-09 04:13:18 +00:00
#endif
if (info->online)
info->ncarrier = 1;
isdn_tty_modem_reset_regs(info, 0);
isdn_tty_modem_hup(info, 1);
}
return;
1996-01-09 04:13:18 +00:00
}
/* byte size and parity */
cval = cflag & (CSIZE | CSTOPB);
cval >>= 4;
if (cflag & PARENB)
cval |= UART_LCR_PARITY;
if (!(cflag & PARODD))
cval |= UART_LCR_EPAR;
fcr = 0;
/* CTS flow control flag and modem status interrupts */
if (cflag & CRTSCTS) {
info->flags |= ISDN_ASYNC_CTS_FLOW;
} else
info->flags &= ~ISDN_ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
info->flags &= ~ISDN_ASYNC_CHECK_CD;
else {
info->flags |= ISDN_ASYNC_CHECK_CD;
}
}
static int
isdn_tty_startup(modem_info * info)
1996-01-09 04:13:18 +00:00
{
ulong flags;
if (info->flags & ISDN_ASYNC_INITIALIZED)
return 0;
save_flags(flags);
cli();
isdn_MOD_INC_USE_COUNT();
1996-01-09 04:13:18 +00:00
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "starting up ttyi%d ...\n", info->line);
#endif
/*
* Now, initialize the UART
1996-01-09 04:13:18 +00:00
*/
info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
1996-01-09 04:13:18 +00:00
if (info->tty)
clear_bit(TTY_IO_ERROR, &info->tty->flags);
/*
* and set the speed of the serial port
*/
isdn_tty_change_speed(info);
info->flags |= ISDN_ASYNC_INITIALIZED;
info->msr |= (UART_MSR_DSR | UART_MSR_CTS);
1996-01-09 04:13:18 +00:00
info->send_outstanding = 0;
restore_flags(flags);
return 0;
}
/*
* This routine will shutdown a serial port; interrupts are disabled, and
* DTR is dropped if the hangup on close termio flag is on.
*/
static void
isdn_tty_shutdown(modem_info * info)
1996-01-09 04:13:18 +00:00
{
ulong flags;
if (!(info->flags & ISDN_ASYNC_INITIALIZED))
return;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line);
#endif
save_flags(flags);
cli(); /* Disable interrupts */
isdn_MOD_DEC_USE_COUNT();
info->msr &= ~UART_MSR_RI;
1996-01-09 04:13:18 +00:00
if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
if (info->emu.mdmreg[13] & 4) {
isdn_tty_modem_reset_regs(info, 0);
1996-01-09 04:13:18 +00:00
#ifdef ISDN_DEBUG_MODEM_HUP
printk(KERN_DEBUG "Mhup in isdn_tty_shutdown\n");
1996-01-09 04:13:18 +00:00
#endif
isdn_tty_modem_hup(info, 1);
}
1996-01-09 04:13:18 +00:00
}
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
info->flags &= ~ISDN_ASYNC_INITIALIZED;
restore_flags(flags);
}
/* isdn_tty_write() is the main send-routine. It is called from the upper
* levels within the kernel to perform sending data. Depending on the
* online-flag it either directs output to the at-command-interpreter or
* to the lower level. Additional tasks done here:
* - If online, check for escape-sequence (+++)
* - If sending audio-data, call isdn_tty_DLEdown() to parse DLE-codes.
* - If receiving audio-data, call isdn_tty_end_vrx() to abort if needed.
* - If dialing, abort dial.
*/
static int
isdn_tty_write(struct tty_struct *tty, int from_user, const u_char * buf, int count)
1996-01-09 04:13:18 +00:00
{
int c,
total = 0;
1996-01-09 04:13:18 +00:00
ulong flags;
modem_info *info = (modem_info *) tty->driver_data;
1996-01-09 04:13:18 +00:00
if (isdn_tty_paranoia_check(info, tty->device, "isdn_tty_write"))
return 0;
if (!tty)
return 0;
save_flags(flags);
cli();
1996-01-09 04:13:18 +00:00
while (1) {
c = MIN(count, info->xmit_size - info->xmit_count);
if (info->isdn_driver >= 0)
c = MIN(c, dev->drv[info->isdn_driver]->maxbufsize);
1996-01-09 04:13:18 +00:00
if (c <= 0)
break;
if ((info->online > 1)
#ifdef CONFIG_ISDN_AUDIO
|| (info->vonline & 3)
#endif
) {
atemu *m = &info->emu;
#ifdef CONFIG_ISDN_AUDIO
if (!info->vonline)
#endif
isdn_tty_check_esc(buf, m->mdmreg[2], c,
&(m->pluscount),
&(m->lastplus),
from_user);
if (from_user)
copy_from_user(&(info->xmit_buf[info->xmit_count]), buf, c);
else
memcpy(&(info->xmit_buf[info->xmit_count]), buf, c);
1996-04-30 21:05:27 +00:00
#ifdef CONFIG_ISDN_AUDIO
if (info->vonline) {
int cc = isdn_tty_handleDLEdown(info, m, c);
if (info->vonline & 2) {
if (!cc) {
/* If DLE decoding results in zero-transmit, but
* c originally was non-zero, do a wakeup.
*/
if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
tty->ldisc.write_wakeup)
(tty->ldisc.write_wakeup) (tty);
wake_up_interruptible(&tty->write_wait);
info->msr |= UART_MSR_CTS;
info->lsr |= UART_LSR_TEMT;
}
info->xmit_count += cc;
}
if ((info->vonline & 3) == 1) {
/* Do NOT handle Ctrl-Q or Ctrl-S
* when in full-duplex audio mode.
*/
if (isdn_tty_end_vrx(buf, c, from_user)) {
info->vonline &= ~1;
#ifdef ISDN_DEBUG_MODEM_VOICE
printk(KERN_DEBUG
"got !^Q/^S, send DLE-ETX,VCON on ttyI%d\n",
info->line);
#endif
isdn_tty_at_cout("\020\003\r\nVCON\r\n", info);
}
}
} else
1996-01-09 04:13:18 +00:00
#endif
info->xmit_count += c;
if (m->mdmreg[13] & 1) {
isdn_tty_senddown(info);
isdn_tty_tint(info);
}
1996-01-09 04:13:18 +00:00
} else {
info->msr |= UART_MSR_CTS;
info->lsr |= UART_LSR_TEMT;
if (info->dialing) {
info->dialing = 0;
1996-01-09 04:13:18 +00:00
#ifdef ISDN_DEBUG_MODEM_HUP
printk(KERN_DEBUG "Mhup in isdn_tty_write\n");
1996-01-09 04:13:18 +00:00
#endif
isdn_tty_modem_result(3, info);
isdn_tty_modem_hup(info, 1);
} else
c = isdn_tty_edit_at(buf, c, info, from_user);
1996-01-09 04:13:18 +00:00
}
buf += c;
count -= c;
total += c;
}
if ((info->xmit_count) || (skb_queue_len(&info->xmit_queue)))
1996-01-09 04:13:18 +00:00
isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1);
restore_flags(flags);
1996-01-09 04:13:18 +00:00
return total;
}
static int
isdn_tty_write_room(struct tty_struct *tty)
1996-01-09 04:13:18 +00:00
{
modem_info *info = (modem_info *) tty->driver_data;
int ret;
if (isdn_tty_paranoia_check(info, tty->device, "isdn_tty_write_room"))
return 0;
if (!info->online)
return info->xmit_size;
ret = info->xmit_size - info->xmit_count;
1996-01-09 04:13:18 +00:00
return (ret < 0) ? 0 : ret;
}
static int
isdn_tty_chars_in_buffer(struct tty_struct *tty)
1996-01-09 04:13:18 +00:00
{
modem_info *info = (modem_info *) tty->driver_data;
if (isdn_tty_paranoia_check(info, tty->device, "isdn_tty_chars_in_buffer"))
return 0;
if (!info->online)
1996-01-09 04:13:18 +00:00
return 0;
return (info->xmit_count);
}
static void
isdn_tty_flush_buffer(struct tty_struct *tty)
1996-01-09 04:13:18 +00:00
{
modem_info *info;
unsigned long flags;
save_flags(flags);
cli();
if (!tty) {
restore_flags(flags);
return;
}
info = (modem_info *) tty->driver_data;
if (isdn_tty_paranoia_check(info, tty->device, "isdn_tty_flush_buffer")) {
restore_flags(flags);
return;
}
isdn_tty_cleanup_xmit(info);
info->xmit_count = 0;
restore_flags(flags);
1996-01-09 04:13:18 +00:00
wake_up_interruptible(&tty->write_wait);
if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
tty->ldisc.write_wakeup)
(tty->ldisc.write_wakeup) (tty);
}
static void
isdn_tty_flush_chars(struct tty_struct *tty)
1996-01-09 04:13:18 +00:00
{
modem_info *info = (modem_info *) tty->driver_data;
if (isdn_tty_paranoia_check(info, tty->device, "isdn_tty_flush_chars"))
return;
if ((info->xmit_count) || (skb_queue_len(&info->xmit_queue)))
1996-01-09 04:13:18 +00:00
isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1);
}
/*
* ------------------------------------------------------------
* isdn_tty_throttle()
*
1996-01-09 04:13:18 +00:00
* This routine is called by the upper-layer tty layer to signal that
* incoming characters should be throttled.
* ------------------------------------------------------------
*/
static void
isdn_tty_throttle(struct tty_struct *tty)
1996-01-09 04:13:18 +00:00
{
modem_info *info = (modem_info *) tty->driver_data;
if (isdn_tty_paranoia_check(info, tty->device, "isdn_tty_throttle"))
return;
if (I_IXOFF(tty))
info->x_char = STOP_CHAR(tty);
info->mcr &= ~UART_MCR_RTS;
1996-01-09 04:13:18 +00:00
}
static void
isdn_tty_unthrottle(struct tty_struct *tty)
1996-01-09 04:13:18 +00:00
{
modem_info *info = (modem_info *) tty->driver_data;
if (isdn_tty_paranoia_check(info, tty->device, "isdn_tty_unthrottle"))
return;
if (I_IXOFF(tty)) {
if (info->x_char)
info->x_char = 0;
else
info->x_char = START_CHAR(tty);
}
info->mcr |= UART_MCR_RTS;
1996-01-09 04:13:18 +00:00
}
/*
* ------------------------------------------------------------
* isdn_tty_ioctl() and friends
* ------------------------------------------------------------
*/
/*
* isdn_tty_get_lsr_info - get line status register info
*
* Purpose: Let user call ioctl() to get info when the UART physically
* is emptied. On bus types like RS485, the transmitter must
* release the bus after transmitting. This must be done when
* the transmit shift register is empty, not be done when the
* transmit holding register is empty. This functionality
* allows RS485 driver to be written in user space.
1996-01-09 04:13:18 +00:00
*/
static int
isdn_tty_get_lsr_info(modem_info * info, uint * value)
1996-01-09 04:13:18 +00:00
{
u_char status;
uint result;
ulong flags;
save_flags(flags);
cli();
status = info->lsr;
1996-01-09 04:13:18 +00:00
restore_flags(flags);
result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
put_user(result, (ulong *) value);
1996-01-09 04:13:18 +00:00
return 0;
}
static int
isdn_tty_get_modem_info(modem_info * info, uint * value)
1996-01-09 04:13:18 +00:00
{
u_char control,
status;
1996-01-09 04:13:18 +00:00
uint result;
ulong flags;
control = info->mcr;
1996-01-09 04:13:18 +00:00
save_flags(flags);
cli();
status = info->msr;
1996-01-09 04:13:18 +00:00
restore_flags(flags);
result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
| ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
| ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
| ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
| ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
| ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
put_user(result, (ulong *) value);
1996-01-09 04:13:18 +00:00
return 0;
}
static int
isdn_tty_set_modem_info(modem_info * info, uint cmd, uint * value)
1996-01-09 04:13:18 +00:00
{
uint arg;
int pre_dtr;
1996-01-09 04:13:18 +00:00
GET_USER(arg, (uint *) value);
1996-01-09 04:13:18 +00:00
switch (cmd) {
case TIOCMBIS:
#ifdef ISDN_DEBUG_MODEM_IOCTL
printk(KERN_DEBUG "ttyI%d ioctl TIOCMBIS\n", info->line);
#endif
if (arg & TIOCM_RTS) {
info->mcr |= UART_MCR_RTS;
}
if (arg & TIOCM_DTR) {
info->mcr |= UART_MCR_DTR;
isdn_tty_modem_ncarrier(info);
}
break;
case TIOCMBIC:
#ifdef ISDN_DEBUG_MODEM_IOCTL
printk(KERN_DEBUG "ttyI%d ioctl TIOCMBIC\n", info->line);
#endif
if (arg & TIOCM_RTS) {
info->mcr &= ~UART_MCR_RTS;
}
if (arg & TIOCM_DTR) {
info->mcr &= ~UART_MCR_DTR;
if (info->emu.mdmreg[13] & 4) {
isdn_tty_modem_reset_regs(info, 0);
1996-01-09 04:13:18 +00:00
#ifdef ISDN_DEBUG_MODEM_HUP
printk(KERN_DEBUG "Mhup in TIOCMBIC\n");
1996-01-09 04:13:18 +00:00
#endif
if (info->online)
info->ncarrier = 1;
isdn_tty_modem_hup(info, 1);
}
}
break;
case TIOCMSET:
#ifdef ISDN_DEBUG_MODEM_IOCTL
printk(KERN_DEBUG "ttyI%d ioctl TIOCMSET\n", info->line);
#endif
pre_dtr = (info->mcr & UART_MCR_DTR);
info->mcr = ((info->mcr & ~(UART_MCR_RTS | UART_MCR_DTR))
| ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0)
| ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0));
if (pre_dtr |= (info->mcr & UART_MCR_DTR)) {
if (!(info->mcr & UART_MCR_DTR)) {
if (info->emu.mdmreg[13] & 4) {
isdn_tty_modem_reset_regs(info, 0);
1996-01-09 04:13:18 +00:00
#ifdef ISDN_DEBUG_MODEM_HUP
printk(KERN_DEBUG "Mhup in TIOCMSET\n");
1996-01-09 04:13:18 +00:00
#endif
if (info->online)
info->ncarrier = 1;
isdn_tty_modem_hup(info, 1);
}
} else
isdn_tty_modem_ncarrier(info);
}
break;
default:
return -EINVAL;
1996-01-09 04:13:18 +00:00
}
return 0;
}
static int
isdn_tty_ioctl(struct tty_struct *tty, struct file *file,
uint cmd, ulong arg)
1996-01-09 04:13:18 +00:00
{
modem_info *info = (modem_info *) tty->driver_data;
int error;
int retval;
if (isdn_tty_paranoia_check(info, tty->device, "isdn_tty_ioctl"))
return -ENODEV;
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
1996-01-09 04:13:18 +00:00
switch (cmd) {
case TCSBRK: /* SVID version: non-zero arg --> no break */
#ifdef ISDN_DEBUG_MODEM_IOCTL
printk(KERN_DEBUG "ttyI%d ioctl TCSBRK\n", info->line);
1996-01-09 04:13:18 +00:00
#endif
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
return 0;
case TCSBRKP: /* support for POSIX tcsendbreak() */
#ifdef ISDN_DEBUG_MODEM_IOCTL
printk(KERN_DEBUG "ttyI%d ioctl TCSBRKP\n", info->line);
1996-01-09 04:13:18 +00:00
#endif
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
return 0;
case TIOCGSOFTCAR:
#ifdef ISDN_DEBUG_MODEM_IOCTL
printk(KERN_DEBUG "ttyI%d ioctl TIOCGSOFTCAR\n", info->line);
1996-01-09 04:13:18 +00:00
#endif
error = verify_area(VERIFY_WRITE, (void *) arg, sizeof(long));
if (error)
return error;
put_user(C_CLOCAL(tty) ? 1 : 0, (ulong *) arg);
return 0;
case TIOCSSOFTCAR:
#ifdef ISDN_DEBUG_MODEM_IOCTL
printk(KERN_DEBUG "ttyI%d ioctl TIOCSSOFTCAR\n", info->line);
1996-01-09 04:13:18 +00:00
#endif
error = verify_area(VERIFY_READ, (void *) arg, sizeof(long));
if (error)
return error;
GET_USER(arg, (ulong *) arg);
tty->termios->c_cflag =
((tty->termios->c_cflag & ~CLOCAL) |
(arg ? CLOCAL : 0));
return 0;
case TIOCMGET:
#ifdef ISDN_DEBUG_MODEM_IOCTL
printk(KERN_DEBUG "ttyI%d ioctl TIOCMGET\n", info->line);
1996-01-09 04:13:18 +00:00
#endif
error = verify_area(VERIFY_WRITE, (void *) arg, sizeof(uint));
if (error)
return error;
return isdn_tty_get_modem_info(info, (uint *) arg);
case TIOCMBIS:
case TIOCMBIC:
case TIOCMSET:
error = verify_area(VERIFY_READ, (void *) arg, sizeof(uint));
if (error)
return error;
return isdn_tty_set_modem_info(info, cmd, (uint *) arg);
case TIOCSERGETLSR: /* Get line status register */
#ifdef ISDN_DEBUG_MODEM_IOCTL
printk(KERN_DEBUG "ttyI%d ioctl TIOCSERGETLSR\n", info->line);
1996-01-09 04:13:18 +00:00
#endif
error = verify_area(VERIFY_WRITE, (void *) arg, sizeof(uint));
if (error)
return error;
else
return isdn_tty_get_lsr_info(info, (uint *) arg);
default:
1996-01-09 04:13:18 +00:00
#ifdef ISDN_DEBUG_MODEM_IOCTL
printk(KERN_DEBUG "UNKNOWN ioctl 0x%08x on ttyi%d\n", cmd, info->line);
1996-01-09 04:13:18 +00:00
#endif
return -ENOIOCTLCMD;
1996-01-09 04:13:18 +00:00
}
return 0;
}
static void
isdn_tty_set_termios(struct tty_struct *tty, struct termios *old_termios)
1996-01-09 04:13:18 +00:00
{
modem_info *info = (modem_info *) tty->driver_data;
if (!old_termios)
isdn_tty_change_speed(info);
else {
if (tty->termios->c_cflag == old_termios->c_cflag)
return;
isdn_tty_change_speed(info);
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
}
}
1996-01-09 04:13:18 +00:00
}
/*
* ------------------------------------------------------------
* isdn_tty_open() and friends
* ------------------------------------------------------------
*/
static int
isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info * info)
1996-01-09 04:13:18 +00:00
{
struct wait_queue wait =
{current, NULL};
1996-01-09 04:13:18 +00:00
int do_clocal = 0;
unsigned long flags;
1996-01-09 04:13:18 +00:00
int retval;
/*
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
if (tty_hung_up_p(filp) ||
(info->flags & ISDN_ASYNC_CLOSING)) {
if (info->flags & ISDN_ASYNC_CLOSING)
interruptible_sleep_on(&info->close_wait);
1996-01-09 04:13:18 +00:00
#ifdef MODEM_DO_RESTART
if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
#else
return -EAGAIN;
#endif
}
/*
* If this is a callout device, then just make sure the normal
* device isn't being used.
*/
if (tty->driver.subtype == ISDN_SERIAL_TYPE_CALLOUT) {
if (info->flags & ISDN_ASYNC_NORMAL_ACTIVE)
return -EBUSY;
if ((info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
(info->flags & ISDN_ASYNC_SESSION_LOCKOUT) &&
(info->session != current->session))
return -EBUSY;
if ((info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
(info->flags & ISDN_ASYNC_PGRP_LOCKOUT) &&
(info->pgrp != current->pgrp))
return -EBUSY;
info->flags |= ISDN_ASYNC_CALLOUT_ACTIVE;
return 0;
}
/*
* If non-blocking mode is set, then make the check up front
* and then exit.
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
1996-01-09 04:13:18 +00:00
if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
return -EBUSY;
info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
return 0;
}
if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) {
if (info->normal_termios.c_cflag & CLOCAL)
do_clocal = 1;
} else {
if (tty->termios->c_cflag & CLOCAL)
do_clocal = 1;
}
/*
* Block waiting for the carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
* this loop, info->count is dropped by one, so that
* isdn_tty_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
add_wait_queue(&info->open_wait, &wait);
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_block_til_ready before block: ttyi%d, count = %d\n",
info->line, info->count);
#endif
save_flags(flags);
cli();
if (!(tty_hung_up_p(filp)))
info->count--;
restore_flags(flags);
1996-01-09 04:13:18 +00:00
info->blocked_open++;
while (1) {
current->state = TASK_INTERRUPTIBLE;
if (tty_hung_up_p(filp) ||
!(info->flags & ISDN_ASYNC_INITIALIZED)) {
#ifdef MODEM_DO_RESTART
if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
#else
retval = -EAGAIN;
#endif
break;
}
if (!(info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
!(info->flags & ISDN_ASYNC_CLOSING) &&
(do_clocal || (info->msr & UART_MSR_DCD))) {
1996-01-09 04:13:18 +00:00
break;
}
if (current->signal & ~current->blocked) {
retval = -ERESTARTSYS;
break;
}
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_block_til_ready blocking: ttyi%d, count = %d\n",
info->line, info->count);
#endif
schedule();
}
current->state = TASK_RUNNING;
remove_wait_queue(&info->open_wait, &wait);
if (!tty_hung_up_p(filp))
info->count++;
info->blocked_open--;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_block_til_ready after blocking: ttyi%d, count = %d\n",
info->line, info->count);
#endif
if (retval)
return retval;
info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
return 0;
}
/*
* This routine is called whenever a serial port is opened. It
* enables interrupts for a serial port, linking in its async structure into
* the IRQ chain. It also performs the serial-specific
* initialization for the tty structure.
*/
static int
isdn_tty_open(struct tty_struct *tty, struct file *filp)
1996-01-09 04:13:18 +00:00
{
modem_info *info;
int retval,
line;
1996-01-09 04:13:18 +00:00
line = MINOR(tty->device) - tty->driver.minor_start;
if (line < 0 || line > ISDN_MAX_CHANNELS)
return -ENODEV;
info = &dev->mdm.info[line];
if (isdn_tty_paranoia_check(info, tty->device, "isdn_tty_open"))
return -ENODEV;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_open %s%d, count = %d\n", tty->driver.name,
info->line, info->count);
#endif
info->count++;
tty->driver_data = info;
info->tty = tty;
/*
* Start up serial port
*/
retval = isdn_tty_startup(info);
if (retval) {
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_open return after startup\n");
#endif
return retval;
}
retval = isdn_tty_block_til_ready(tty, filp, info);
if (retval) {
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_open return after isdn_tty_block_til_ready \n");
#endif
return retval;
}
if ((info->count == 1) && (info->flags & ISDN_ASYNC_SPLIT_TERMIOS)) {
if (tty->driver.subtype == ISDN_SERIAL_TYPE_NORMAL)
*tty->termios = info->normal_termios;
else
*tty->termios = info->callout_termios;
isdn_tty_change_speed(info);
}
info->session = current->session;
info->pgrp = current->pgrp;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_open ttyi%d successful...\n", info->line);
#endif
dev->modempoll++;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_open normal exit\n");
#endif
return 0;
}
static void
isdn_tty_close(struct tty_struct *tty, struct file *filp)
1996-01-09 04:13:18 +00:00
{
modem_info *info = (modem_info *) tty->driver_data;
ulong flags;
ulong timeout;
if (!info || isdn_tty_paranoia_check(info, tty->device, "isdn_tty_close"))
return;
save_flags(flags);
cli();
if (tty_hung_up_p(filp)) {
restore_flags(flags);
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_close return after tty_hung_up_p\n");
#endif
return;
}
if ((tty->count == 1) && (info->count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. Info->count should always
* be one in these conditions. If it's greater than
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
printk(KERN_ERR "isdn_tty_close: bad port count; tty->count is 1, "
"info->count is %d\n", info->count);
info->count = 1;
}
if (--info->count < 0) {
printk(KERN_ERR "isdn_tty_close: bad port count for ttyi%d: %d\n",
info->line, info->count);
info->count = 0;
}
if (info->count) {
restore_flags(flags);
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
#endif
return;
}
info->flags |= ISDN_ASYNC_CLOSING;
/*
* Save the termios structure, since this port may have
* separate termios for callout and dialin.
*/
if (info->flags & ISDN_ASYNC_NORMAL_ACTIVE)
info->normal_termios = *tty->termios;
if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
info->callout_termios = *tty->termios;
tty->closing = 1;
1996-01-09 04:13:18 +00:00
/*
* At this point we stop accepting input. To do this, we
* disable the receive line status interrupts, and tell the
* interrupt driver to stop checking the data ready bit in the
* line status register.
*/
if (info->flags & ISDN_ASYNC_INITIALIZED) {
tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
1996-01-09 04:13:18 +00:00
/*
* Before we drop DTR, make sure the UART transmitter
* has completely drained; this is especially
* important if there is a transmit FIFO!
*/
timeout = jiffies + HZ;
while (!(info->lsr & UART_LSR_TEMT)) {
1996-01-09 04:13:18 +00:00
current->state = TASK_INTERRUPTIBLE;
current->timeout = jiffies + 20;
schedule();
if (jiffies > timeout)
break;
}
}
dev->modempoll--;
1996-01-09 04:13:18 +00:00
isdn_tty_shutdown(info);
if (tty->driver.flush_buffer)
tty->driver.flush_buffer(tty);
if (tty->ldisc.flush_buffer)
tty->ldisc.flush_buffer(tty);
info->tty = 0;
info->ncarrier = 0;
1996-01-09 04:13:18 +00:00
tty->closing = 0;
if (info->blocked_open) {
current->state = TASK_INTERRUPTIBLE;
current->timeout = jiffies + 50;
schedule();
1996-01-09 04:13:18 +00:00
wake_up_interruptible(&info->open_wait);
}
info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE |
ISDN_ASYNC_CLOSING);
wake_up_interruptible(&info->close_wait);
restore_flags(flags);
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_close normal exit\n");
#endif
}
/*
* isdn_tty_hangup() --- called by tty_hangup() when a hangup is signaled.
*/
static void
isdn_tty_hangup(struct tty_struct *tty)
1996-01-09 04:13:18 +00:00
{
modem_info *info = (modem_info *) tty->driver_data;
if (isdn_tty_paranoia_check(info, tty->device, "isdn_tty_hangup"))
return;
isdn_tty_shutdown(info);
info->count = 0;
info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE);
info->tty = 0;
wake_up_interruptible(&info->open_wait);
}
/* This routine initializes all emulator-data.
*/
static void
isdn_tty_reset_profile(atemu * m)
1996-01-09 04:13:18 +00:00
{
m->profile[0] = 0;
m->profile[1] = 0;
m->profile[2] = 43;
m->profile[3] = 13;
m->profile[4] = 10;
m->profile[5] = 8;
m->profile[6] = 3;
m->profile[7] = 60;
m->profile[8] = 2;
m->profile[9] = 6;
m->profile[10] = 7;
m->profile[11] = 70;
m->profile[12] = 0x45;
m->profile[13] = 4;
1996-01-09 04:13:18 +00:00
m->profile[14] = ISDN_PROTO_L2_X75I;
m->profile[15] = ISDN_PROTO_L3_TRANS;
m->profile[16] = ISDN_SERIAL_XMIT_SIZE / 16;
m->profile[17] = ISDN_MODEM_WINSIZE;
1996-04-30 21:05:27 +00:00
m->profile[18] = 4;
1996-01-09 04:13:18 +00:00
m->profile[19] = 0;
1996-04-30 21:05:27 +00:00
m->profile[20] = 0;
1996-01-09 04:13:18 +00:00
m->pmsn[0] = '\0';
}
#ifdef CONFIG_ISDN_AUDIO
static void
isdn_tty_modem_reset_vpar(atemu * m)
1996-04-30 21:05:27 +00:00
{
m->vpar[0] = 2; /* Voice-device (2 = phone line) */
m->vpar[1] = 0; /* Silence detection level (0 = none ) */
m->vpar[2] = 70; /* Silence interval (7 sec. ) */
m->vpar[3] = 2; /* Compression type (1 = ADPCM-2 ) */
1996-04-30 21:05:27 +00:00
}
#endif
1996-04-30 21:05:27 +00:00
static void
isdn_tty_modem_reset_regs(modem_info * info, int force)
1996-01-09 04:13:18 +00:00
{
atemu *m = &info->emu;
1996-01-09 04:13:18 +00:00
if ((m->mdmreg[12] & 32) || force) {
memcpy(m->mdmreg, m->profile, ISDN_MODEM_ANZREG);
memcpy(m->msn, m->pmsn, ISDN_MSNLEN);
info->xmit_size = m->mdmreg[16] * 16;
1996-01-09 04:13:18 +00:00
}
#ifdef CONFIG_ISDN_AUDIO
isdn_tty_modem_reset_vpar(m);
#endif
1996-01-09 04:13:18 +00:00
m->mdmcmdl = 0;
}
static void
modem_write_profile(atemu * m)
1996-01-09 04:13:18 +00:00
{
memcpy(m->profile, m->mdmreg, ISDN_MODEM_ANZREG);
memcpy(m->pmsn, m->msn, ISDN_MSNLEN);
if (dev->profd)
send_sig(SIGIO, dev->profd, 1);
}
int
isdn_tty_modem_init(void)
1996-01-09 04:13:18 +00:00
{
modem *m;
int i;
modem_info *info;
m = &dev->mdm;
memset(&m->tty_modem, 0, sizeof(struct tty_driver));
m->tty_modem.magic = TTY_DRIVER_MAGIC;
m->tty_modem.name = isdn_ttyname_ttyI;
m->tty_modem.major = ISDN_TTY_MAJOR;
m->tty_modem.minor_start = 0;
m->tty_modem.num = ISDN_MAX_CHANNELS;
m->tty_modem.type = TTY_DRIVER_TYPE_SERIAL;
m->tty_modem.subtype = ISDN_SERIAL_TYPE_NORMAL;
m->tty_modem.init_termios = tty_std_termios;
m->tty_modem.init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
m->tty_modem.flags = TTY_DRIVER_REAL_RAW;
m->tty_modem.refcount = &m->refcount;
m->tty_modem.table = m->modem_table;
m->tty_modem.termios = m->modem_termios;
m->tty_modem.termios_locked = m->modem_termios_locked;
1996-01-09 04:13:18 +00:00
m->tty_modem.open = isdn_tty_open;
m->tty_modem.close = isdn_tty_close;
m->tty_modem.write = isdn_tty_write;
m->tty_modem.put_char = NULL;
m->tty_modem.flush_chars = isdn_tty_flush_chars;
m->tty_modem.write_room = isdn_tty_write_room;
m->tty_modem.chars_in_buffer = isdn_tty_chars_in_buffer;
m->tty_modem.flush_buffer = isdn_tty_flush_buffer;
m->tty_modem.ioctl = isdn_tty_ioctl;
m->tty_modem.throttle = isdn_tty_throttle;
m->tty_modem.unthrottle = isdn_tty_unthrottle;
m->tty_modem.set_termios = isdn_tty_set_termios;
m->tty_modem.stop = NULL;
m->tty_modem.start = NULL;
m->tty_modem.hangup = isdn_tty_hangup;
/*
* The callout device is just like normal device except for
* major number and the subtype code.
*/
m->cua_modem = m->tty_modem;
m->cua_modem.name = isdn_ttyname_cui;
m->cua_modem.major = ISDN_TTYAUX_MAJOR;
m->tty_modem.minor_start = 0;
m->cua_modem.subtype = ISDN_SERIAL_TYPE_CALLOUT;
if (tty_register_driver(&m->tty_modem)) {
printk(KERN_WARNING "isdn_tty: Couldn't register modem-device\n");
1996-01-09 04:13:18 +00:00
return -1;
}
if (tty_register_driver(&m->cua_modem)) {
printk(KERN_WARNING "isdn_tty: Couldn't register modem-callout-device\n");
1996-01-09 04:13:18 +00:00
return -2;
}
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
info = &m->info[i];
sprintf(info->last_cause, "0000");
sprintf(info->last_num, "none");
info->last_dir = 0;
info->last_lhup = 1;
info->last_l2 = 0;
info->last_si = 0;
isdn_tty_reset_profile(&info->emu);
1996-10-19 18:56:43 +00:00
isdn_tty_modem_reset_regs(info, 1);
1996-01-09 04:13:18 +00:00
info->magic = ISDN_ASYNC_MAGIC;
info->line = i;
info->tty = 0;
info->x_char = 0;
info->count = 0;
info->blocked_open = 0;
info->callout_termios = m->cua_modem.init_termios;
info->normal_termios = m->tty_modem.init_termios;
info->open_wait = 0;
info->close_wait = 0;
info->isdn_driver = -1;
info->isdn_channel = -1;
info->drv_index = -1;
info->xmit_size = ISDN_SERIAL_XMIT_SIZE;
skb_queue_head_init(&info->xmit_queue);
#ifdef CONFIG_ISDN_AUDIO
skb_queue_head_init(&info->dtmf_queue);
#endif
if (!(info->xmit_buf = kmalloc(ISDN_SERIAL_XMIT_SIZE + 5, GFP_KERNEL))) {
printk(KERN_ERR "Could not allocate modem xmit-buffer\n");
return -3;
}
/* Make room for T.70 header */
info->xmit_buf += 4;
1996-01-09 04:13:18 +00:00
}
return 0;
}
/*
* An incoming call-request has arrived.
* Search the tty-devices for an appropriate device and bind
1996-01-09 04:13:18 +00:00
* it to the ISDN-Channel.
* Return Index to dev->mdm or -1 if none found.
*/
int
isdn_tty_find_icall(int di, int ch, setup_parm setup)
1996-01-09 04:13:18 +00:00
{
char *eaz;
int i;
int idx;
int si1;
int si2;
char nr[32];
1996-01-09 04:13:18 +00:00
ulong flags;
save_flags(flags);
cli();
if (!setup.phone[0]) {
1996-01-09 04:13:18 +00:00
nr[0] = '0';
nr[1] = '\0';
printk(KERN_INFO "isdn_tty: Incoming call without OAD, assuming '0'\n");
1996-01-09 04:13:18 +00:00
} else
strcpy(nr, setup.phone);
si1 = (int) setup.si1;
si2 = (int) setup.si2;
if (!setup.eazmsn[0]) {
printk(KERN_WARNING "isdn_tty: Incoming call without CPN, assuming '0'\n");
1996-01-09 04:13:18 +00:00
eaz = "0";
} else
eaz = setup.eazmsn;
1996-01-09 04:13:18 +00:00
#ifdef ISDN_DEBUG_MODEM_ICALL
printk(KERN_DEBUG "m_fi: eaz=%s si1=%d si2=%d\n", eaz, si1, si2);
#endif
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
modem_info *info = &dev->mdm.info[i];
1996-01-09 04:13:18 +00:00
#ifdef ISDN_DEBUG_MODEM_ICALL
printk(KERN_DEBUG "m_fi: i=%d msn=%s mmsn=%s mreg18=%d mreg19=%d\n", i,
info->emu.msn, isdn_map_eaz2msn(info->emu.msn, di),
info->emu.mdmreg[18], info->emu.mdmreg[19]);
1996-01-09 04:13:18 +00:00
#endif
if ((!strcmp(isdn_map_eaz2msn(info->emu.msn, di),
eaz)) && /* EAZ is matching */
(info->emu.mdmreg[18] & si2bit[si1]) && /* SI1 is matching */
((info->emu.mdmreg[19] == si2) || !si2)) { /* SI2 is matching or 0 */
1996-01-09 04:13:18 +00:00
idx = isdn_dc2minor(di, ch);
#ifdef ISDN_DEBUG_MODEM_ICALL
printk(KERN_DEBUG "m_fi: match1\n");
printk(KERN_DEBUG "m_fi: idx=%d flags=%08lx drv=%d ch=%d usg=%d\n", idx,
info->flags, info->isdn_driver, info->isdn_channel,
dev->usage[idx]);
#endif
if ((info->flags & ISDN_ASYNC_NORMAL_ACTIVE) &&
(info->isdn_driver == -1) &&
(info->isdn_channel == -1) &&
(USG_NONE(dev->usage[idx]))) {
info->isdn_driver = di;
info->isdn_channel = ch;
info->drv_index = idx;
dev->m_idx[idx] = info->line;
dev->usage[idx] &= ISDN_USAGE_EXCLUSIVE;
dev->usage[idx] |= (si1 == 1) ? ISDN_USAGE_VOICE : ISDN_USAGE_MODEM;
1996-01-09 04:13:18 +00:00
strcpy(dev->num[idx], nr);
info->emu.mdmreg[20] = si2bit[si1];
info->emu.mdmreg[21] = setup.plan;
info->emu.mdmreg[22] = setup.screen;
1996-01-09 04:13:18 +00:00
isdn_info_update();
restore_flags(flags);
printk(KERN_INFO "isdn_tty: call from %s, -> RING on ttyI%d\n", nr,
info->line);
info->msr |= UART_MSR_RI;
isdn_tty_modem_result(2, info);
isdn_timer_ctrl(ISDN_TIMER_MODEMRING, 1);
1996-01-09 04:13:18 +00:00
return info->line;
}
}
}
printk(KERN_INFO "isdn_tty: call from %s -> %s %s\n", nr, eaz,
dev->drv[di]->reject_bus ? "rejected" : "ignored");
restore_flags(flags);
return -1;
}
#define TTY_IS_ACTIVE(info) \
(info->flags & (ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE))
int
isdn_tty_stat_callback(int i, isdn_ctrl * c)
{
int mi;
modem_info *info;
if (i < 0)
return 0;
if ((mi = dev->m_idx[i]) >= 0) {
info = &dev->mdm.info[mi];
switch (c->command) {
case ISDN_STAT_BSENT:
if ((info->isdn_driver == c->driver) &&
(info->isdn_channel == c->arg)) {
info->msr |= UART_MSR_CTS;
if (info->send_outstanding)
if (!(--info->send_outstanding))
info->lsr |= UART_LSR_TEMT;
isdn_tty_tint(info);
return 1;
}
break;
case ISDN_STAT_CAUSE:
/* Signal cause to tty-device */
strncpy(info->last_cause, c->parm.num, 5);
return 1;
case ISDN_STAT_DCONN:
if (TTY_IS_ACTIVE(info)) {
if (info->dialing == 1) {
info->dialing = 2;
return 1;
}
}
break;
case ISDN_STAT_DHUP:
if (TTY_IS_ACTIVE(info)) {
if (info->dialing == 1) {
info->dialing = 0;
isdn_tty_modem_result(7, info);
}
#ifdef ISDN_DEBUG_MODEM_HUP
printk(KERN_DEBUG "Mhup in ISDN_STAT_DHUP\n");
#endif
isdn_tty_modem_hup(info, 0);
return 1;
}
break;
case ISDN_STAT_BCONN:
/* Schedule CONNECT-Message to any tty
* waiting for it and
* set DCD-bit of its modem-status.
*/
if (TTY_IS_ACTIVE(info)) {
info->msr |= UART_MSR_DCD;
if (info->dialing) {
info->dialing = 0;
info->last_dir = 1;
} else
info->last_dir = 0;
info->rcvsched = 1;
if (USG_MODEM(dev->usage[i]))
isdn_tty_modem_result(5, info);
if (USG_VOICE(dev->usage[i]))
isdn_tty_modem_result(11, info);
return 1;
}
break;
case ISDN_STAT_BHUP:
if (TTY_IS_ACTIVE(info)) {
#ifdef ISDN_DEBUG_MODEM_HUP
printk(KERN_DEBUG "Mhup in ISDN_STAT_BHUP\n");
#endif
isdn_tty_modem_hup(info, 0);
return 1;
}
break;
case ISDN_STAT_NODCH:
if (TTY_IS_ACTIVE(info)) {
if (info->dialing) {
info->dialing = 0;
info->last_l2 = -1;
info->last_si = 0;
sprintf(info->last_cause, "0000");
isdn_tty_modem_result(6, info);
}
info->msr &= ~UART_MSR_DCD;
if (info->online) {
isdn_tty_modem_result(3, info);
info->online = 0;
}
return 1;
}
break;
case ISDN_STAT_UNLOAD:
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
info = &dev->mdm.info[i];
if (info->isdn_driver == c->driver) {
if (info->online)
isdn_tty_modem_hup(info, 1);
}
}
return 1;
}
}
return 0;
}
1996-01-09 04:13:18 +00:00
/*********************************************************************
Modem-Emulator-Routines
*********************************************************************/
#define cmdchar(c) ((c>' ')&&(c<=0x7f))
/*
* Put a message from the AT-emulator into receive-buffer of tty,
* convert CR, LF, and BS to values in modem-registers 3, 4 and 5.
*/
static void
isdn_tty_at_cout(char *msg, modem_info * info)
1996-01-09 04:13:18 +00:00
{
struct tty_struct *tty;
atemu *m = &info->emu;
1996-01-09 04:13:18 +00:00
char *p;
char c;
ulong flags;
if (!msg) {
printk(KERN_WARNING "isdn_tty: Null-Message in isdn_tty_at_cout\n");
1996-01-09 04:13:18 +00:00
return;
}
save_flags(flags);
cli();
tty = info->tty;
for (p = msg; *p; p++) {
switch (*p) {
case '\r':
c = m->mdmreg[3];
break;
case '\n':
c = m->mdmreg[4];
break;
case '\b':
c = m->mdmreg[5];
break;
default:
c = *p;
1996-01-09 04:13:18 +00:00
}
if ((info->flags & ISDN_ASYNC_CLOSING) || (!tty)) {
restore_flags(flags);
return;
}
if (tty->flip.count >= TTY_FLIPBUF_SIZE)
break;
tty_insert_flip_char(tty, c, 0);
}
restore_flags(flags);
queue_task(&tty->flip.tqueue, &tq_timer);
1996-01-09 04:13:18 +00:00
}
/*
* Perform ATH Hangup
*/
static void
isdn_tty_on_hook(modem_info * info)
1996-01-09 04:13:18 +00:00
{
if (info->isdn_channel >= 0) {
#ifdef ISDN_DEBUG_MODEM_HUP
printk(KERN_DEBUG "Mhup in isdn_tty_on_hook\n");
#endif
isdn_tty_modem_hup(info, 1);
1996-01-09 04:13:18 +00:00
}
}
static void
isdn_tty_off_hook(void)
1996-01-09 04:13:18 +00:00
{
printk(KERN_DEBUG "isdn_tty_off_hook\n");
}
#define PLUSWAIT1 (HZ/2) /* 0.5 sec. */
#define PLUSWAIT2 (HZ*3/2) /* 1.5 sec */
1996-01-09 04:13:18 +00:00
/*
* Check Buffer for Modem-escape-sequence, activate timer-callback to
* isdn_tty_modem_escape() if sequence found.
*
* Parameters:
* p pointer to databuffer
* plus escape-character
* count length of buffer
* pluscount count of valid escape-characters so far
* lastplus timestamp of last character
*/
static void
isdn_tty_check_esc(const u_char * p, u_char plus, int count, int *pluscount,
int *lastplus, int from_user)
1996-01-09 04:13:18 +00:00
{
char cbuf[3];
if (plus > 127)
return;
if (count > 3) {
p += count - 3;
count = 3;
*pluscount = 0;
}
if (from_user) {
copy_from_user(cbuf, p, count);
1996-01-09 04:13:18 +00:00
p = cbuf;
}
while (count > 0) {
if (*(p++) == plus) {
if ((*pluscount)++) {
/* Time since last '+' > 0.5 sec. ? */
if ((jiffies - *lastplus) > PLUSWAIT1)
*pluscount = 1;
} else {
/* Time since last non-'+' < 1.5 sec. ? */
if ((jiffies - *lastplus) < PLUSWAIT2)
*pluscount = 0;
}
if ((*pluscount == 3) && (count = 1))
isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, 1);
if (*pluscount > 3)
*pluscount = 1;
} else
*pluscount = 0;
*lastplus = jiffies;
count--;
}
}
/*
* Return result of AT-emulator to tty-receive-buffer, depending on
* modem-register 12, bit 0 and 1.
* For CONNECT-messages also switch to online-mode.
* For RING-message handle auto-ATA if register 0 != 0
*/
static void
isdn_tty_modem_result(int code, modem_info * info)
1996-01-09 04:13:18 +00:00
{
atemu *m = &info->emu;
1996-01-09 04:13:18 +00:00
static char *msg[] =
{"OK", "CONNECT", "RING", "NO CARRIER", "ERROR",
"CONNECT 64000", "NO DIALTONE", "BUSY", "NO ANSWER",
1996-04-30 21:05:27 +00:00
"RINGING", "NO MSN/EAZ", "VCON"};
1996-01-09 04:13:18 +00:00
ulong flags;
char s[10];
1996-01-09 04:13:18 +00:00
switch (code) {
case 2:
m->mdmreg[1]++; /* RING */
if (m->mdmreg[1] == m->mdmreg[0])
/* Automatically accept incoming call */
isdn_tty_cmd_ATA(info);
break;
case 3:
/* NO CARRIER */
#ifdef ISDN_DEBUG_MODEM_HUP
printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
(info->flags & ISDN_ASYNC_CLOSING),
(!info->tty));
#endif
save_flags(flags);
cli();
m->mdmreg[1] = 0;
del_timer(&info->nc_timer);
info->ncarrier = 0;
if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
restore_flags(flags);
return;
}
restore_flags(flags);
#ifdef CONFIG_ISDN_AUDIO
if (info->vonline & 1) {
#ifdef ISDN_DEBUG_MODEM_VOICE
printk(KERN_DEBUG "res3: send DLE-ETX on ttyI%d\n",
info->line);
#endif
/* voice-recording, add DLE-ETX */
isdn_tty_at_cout("\020\003", info);
}
if (info->vonline & 2) {
#ifdef ISDN_DEBUG_MODEM_VOICE
printk(KERN_DEBUG "res3: send DLE-DC4 on ttyI%d\n",
info->line);
#endif
/* voice-playing, add DLE-DC4 */
isdn_tty_at_cout("\020\024", info);
}
#endif
break;
case 1:
case 5:
sprintf(info->last_cause, "0000");
if (!info->online)
info->online = 2;
break;
case 11:
#ifdef ISDN_DEBUG_MODEM_VOICE
printk(KERN_DEBUG "res3: send VCON on ttyI%d\n",
info->line);
#endif
sprintf(info->last_cause, "0000");
if (!info->online)
info->online = 1;
break;
1996-01-09 04:13:18 +00:00
}
if (m->mdmreg[12] & 1) {
/* Show results */
isdn_tty_at_cout("\r\n", info);
if (m->mdmreg[12] & 2) {
/* Show numeric results */
sprintf(s, "%d", code);
isdn_tty_at_cout(s, info);
} else {
1997-02-16 12:11:59 +00:00
if ((code == 2) && (!(m->mdmreg[13] & 16))) {
1996-01-09 04:13:18 +00:00
isdn_tty_at_cout("CALLER NUMBER: ", info);
isdn_tty_at_cout(dev->num[info->drv_index], info);
isdn_tty_at_cout("\r\n", info);
}
isdn_tty_at_cout(msg[code], info);
switch (code) {
1997-02-16 12:11:59 +00:00
case 2:
/* Print CID only once, _after_ 1.st RING */
if ((m->mdmreg[13] & 16) && (m->mdmreg[1] == 1)) {
isdn_tty_at_cout("\r\n", info);
isdn_tty_at_cout("CALLER NUMBER: ", info);
isdn_tty_at_cout(dev->num[info->drv_index], info);
}
break;
case 3:
case 6:
case 7:
case 8:
1997-02-16 12:11:59 +00:00
m->mdmreg[1] = 0;
/* Append Cause-Message if enabled */
if (m->mdmreg[13] & 8) {
sprintf(s, "/%s", info->last_cause);
isdn_tty_at_cout(s, info);
}
break;
case 5:
/* Append Protocol to CONNECT message */
isdn_tty_at_cout((m->mdmreg[14] != 3) ? "/X.75" : "/HDLC", info);
if (m->mdmreg[13] & 2)
isdn_tty_at_cout("/T.70", info);
break;
1996-01-09 04:13:18 +00:00
}
}
isdn_tty_at_cout("\r\n", info);
}
if (code == 3) {
save_flags(flags);
cli();
if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
restore_flags(flags);
return;
}
if (info->tty->ldisc.flush_buffer)
info->tty->ldisc.flush_buffer(info->tty);
1996-01-09 04:13:18 +00:00
if ((info->flags & ISDN_ASYNC_CHECK_CD) &&
(!((info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
(info->flags & ISDN_ASYNC_CALLOUT_NOHUP)))) {
1996-01-09 04:13:18 +00:00
tty_hangup(info->tty);
}
1996-01-09 04:13:18 +00:00
restore_flags(flags);
}
}
/*
* Display a modem-register-value.
*/
static void
isdn_tty_show_profile(int ridx, modem_info * info)
1996-01-09 04:13:18 +00:00
{
char v[6];
sprintf(v, "\r\n%d", info->emu.mdmreg[ridx]);
1996-01-09 04:13:18 +00:00
isdn_tty_at_cout(v, info);
}
/*
* Get MSN-string from char-pointer, set pointer to end of number
*/
static void
isdn_tty_get_msnstr(char *n, char **p)
1996-01-09 04:13:18 +00:00
{
while ((*p[0] >= '0' && *p[0] <= '9') || (*p[0] == ','))
*n++ = *p[0]++;
*n = '\0';
}
/*
* Get phone-number from modem-commandbuffer
*/
static void
isdn_tty_getdial(char *p, char *q)
1996-01-09 04:13:18 +00:00
{
int first = 1;
while (strchr("0123456789,#.*WPTS-", *p) && *p) {
if ((*p >= '0' && *p <= '9') || ((*p == 'S') && first))
*q++ = *p;
p++;
first = 0;
}
*q = 0;
}
1996-04-30 21:05:27 +00:00
#define PARSE_ERROR { isdn_tty_modem_result(4, info); return; }
#define PARSE_ERROR1 { isdn_tty_modem_result(4, info); return 1; }
static void
isdn_tty_report(modem_info * info)
{
atemu *m = &info->emu;
char s[80];
isdn_tty_at_cout("\r\nStatistics of last connection:\r\n\r\n", info);
sprintf(s, " Remote Number: %s\r\n", info->last_num);
isdn_tty_at_cout(s, info);
sprintf(s, " Direction: %s\r\n", info->last_dir ? "outgoing" : "incoming");
isdn_tty_at_cout(s, info);
isdn_tty_at_cout(" Layer-2 Protocol: ", info);
switch (info->last_l2) {
case ISDN_PROTO_L2_X75I:
isdn_tty_at_cout("x75i", info);
break;
case ISDN_PROTO_L2_X75UI:
isdn_tty_at_cout("x75ui", info);
break;
case ISDN_PROTO_L2_X75BUI:
isdn_tty_at_cout("x75bui", info);
break;
case ISDN_PROTO_L2_HDLC:
isdn_tty_at_cout("hdlc", info);
break;
case ISDN_PROTO_L2_TRANS:
isdn_tty_at_cout("transparent", info);
break;
default:
isdn_tty_at_cout("unknown", info);
break;
}
isdn_tty_at_cout((m->mdmreg[13] & 2) ? "/t.70\r\n" : "\r\n", info);
isdn_tty_at_cout(" Service: ", info);
switch (info->last_si) {
case 1:
isdn_tty_at_cout("audio\r\n", info);
break;
case 5:
isdn_tty_at_cout("btx\r\n", info);
break;
case 7:
isdn_tty_at_cout("data\r\n", info);
break;
default:
sprintf(s, "%d\r\n", info->last_si);
isdn_tty_at_cout(s, info);
break;
}
sprintf(s, " Hangup location: %s\r\n", info->last_lhup ? "local" : "remote");
isdn_tty_at_cout(s, info);
sprintf(s, " Last cause: %s\r\n", info->last_cause);
isdn_tty_at_cout(s, info);
}
/*
* Parse AT&.. commands.
*/
static int
isdn_tty_cmd_ATand(char **p, modem_info * info)
1996-04-30 21:05:27 +00:00
{
atemu *m = &info->emu;
int i;
char rb[100];
switch (*p[0]) {
case 'B':
/* &B - Set Buffersize */
p[0]++;
i = isdn_getnum(p);
if ((i < 0) || (i > ISDN_SERIAL_XMIT_SIZE))
PARSE_ERROR1;
1996-04-30 21:05:27 +00:00
#ifdef CONFIG_ISDN_AUDIO
if ((m->mdmreg[18] & 1) && (i > VBUF))
PARSE_ERROR1;
1996-04-30 21:05:27 +00:00
#endif
m->mdmreg[16] = i / 16;
info->xmit_size = m->mdmreg[16] * 16;
break;
case 'D':
/* &D - Set DCD-Low-behavior */
p[0]++;
switch (isdn_getnum(p)) {
case 0:
m->mdmreg[13] &= ~4;
m->mdmreg[12] &= ~32;
break;
case 2:
m->mdmreg[13] |= 4;
m->mdmreg[12] &= ~32;
break;
case 3:
m->mdmreg[13] |= 4;
m->mdmreg[12] |= 32;
break;
default:
PARSE_ERROR1
}
break;
case 'E':
/* &E -Set EAZ/MSN */
p[0]++;
isdn_tty_get_msnstr(m->msn, p);
break;
case 'F':
/* &F -Set Factory-Defaults */
p[0]++;
isdn_tty_reset_profile(m);
isdn_tty_modem_reset_regs(info, 1);
break;
case 'S':
/* &S - Set Windowsize */
p[0]++;
i = isdn_getnum(p);
if ((i > 0) && (i < 9))
m->mdmreg[17] = i;
else
PARSE_ERROR1;
break;
case 'V':
/* &V - Show registers */
p[0]++;
isdn_tty_at_cout("\r\n", info);
for (i = 0; i < ISDN_MODEM_ANZREG; i++) {
sprintf(rb, "S%02d=%03d%s", i,
m->mdmreg[i], ((i + 1) % 10) ? " " : "\r\n");
isdn_tty_at_cout(rb, info);
}
sprintf(rb, "\r\nEAZ/MSN: %s\r\n",
strlen(m->msn) ? m->msn : "None");
isdn_tty_at_cout(rb, info);
break;
case 'W':
/* &W - Write Profile */
p[0]++;
switch (*p[0]) {
case '0':
p[0]++;
modem_write_profile(m);
break;
default:
PARSE_ERROR1;
}
break;
case 'X':
/* &X - Switch to BTX-Mode */
p[0]++;
switch (isdn_getnum(p)) {
case 0:
m->mdmreg[13] &= ~2;
info->xmit_size = m->mdmreg[16] * 16;
break;
case 1:
m->mdmreg[13] |= 2;
m->mdmreg[14] = 0;
info->xmit_size = 112;
m->mdmreg[18] = 4;
m->mdmreg[19] = 0;
break;
default:
PARSE_ERROR1;
}
break;
default:
PARSE_ERROR1;
}
return 0;
1996-04-30 21:05:27 +00:00
}
static int
isdn_tty_check_ats(int mreg, int mval, modem_info * info, atemu * m)
{
/* Some plausibility checks */
switch (mreg) {
case 14:
if (mval > ISDN_PROTO_L2_TRANS)
return 1;
break;
case 16:
if ((mval * 16) > ISDN_SERIAL_XMIT_SIZE)
return 1;
#ifdef CONFIG_ISDN_AUDIO
if ((m->mdmreg[18] & 1) && (mval > VBUFX))
return 1;
#endif
info->xmit_size = mval * 16;
break;
case 20:
case 21:
case 22:
/* readonly registers */
return 1;
}
return 0;
}
/*
* Perform ATS command
*/
static int
isdn_tty_cmd_ATS(char **p, modem_info * info)
1996-04-30 21:05:27 +00:00
{
atemu *m = &info->emu;
int bitpos;
int mreg;
int mval;
int bval;
mreg = isdn_getnum(p);
if (mreg < 0 || mreg > ISDN_MODEM_ANZREG)
PARSE_ERROR1;
switch (*p[0]) {
case '=':
p[0]++;
mval = isdn_getnum(p);
if (mval < 0 || mval > 255)
PARSE_ERROR1;
if (isdn_tty_check_ats(mreg, mval, info, m))
PARSE_ERROR1;
m->mdmreg[mreg] = mval;
break;
case '.':
/* Set/Clear a single bit */
p[0]++;
bitpos = isdn_getnum(p);
if ((bitpos < 0) || (bitpos > 7))
PARSE_ERROR1;
switch (*p[0]) {
case '=':
p[0]++;
bval = isdn_getnum(p);
if (bval < 0 || bval > 1)
PARSE_ERROR1;
if (bval)
mval = m->mdmreg[mreg] | (1 << bitpos);
else
mval = m->mdmreg[mreg] & ~(1 << bitpos);
if (isdn_tty_check_ats(mreg, mval, info, m))
PARSE_ERROR1;
m->mdmreg[mreg] = mval;
break;
case '?':
p[0]++;
isdn_tty_at_cout("\r\n", info);
isdn_tty_at_cout((m->mdmreg[mreg] & (1 << bitpos)) ? "1" : "0",
info);
break;
default:
PARSE_ERROR1;
}
break;
case '?':
p[0]++;
isdn_tty_show_profile(mreg, info);
break;
default:
PARSE_ERROR1;
break;
}
return 0;
1996-04-30 21:05:27 +00:00
}
/*
* Perform ATA command
*/
static void
isdn_tty_cmd_ATA(modem_info * info)
1996-04-30 21:05:27 +00:00
{
atemu *m = &info->emu;
isdn_ctrl cmd;
int l2;
1996-04-30 21:05:27 +00:00
if (info->msr & UART_MSR_RI) {
/* Accept incoming call */
info->last_dir = 0;
strcpy(info->last_num, dev->num[info->drv_index]);
m->mdmreg[1] = 0;
info->msr &= ~UART_MSR_RI;
l2 = m->mdmreg[14];
1996-04-30 21:05:27 +00:00
#ifdef CONFIG_ISDN_AUDIO
/* If more than one bit set in reg18, autoselect Layer2 */
if ((m->mdmreg[18] & m->mdmreg[20]) != m->mdmreg[18]) {
if (m->mdmreg[20] == 1)
l2 = 4;
else
l2 = 0;
}
1996-04-30 21:05:27 +00:00
#endif
cmd.driver = info->isdn_driver;
cmd.command = ISDN_CMD_SETL2;
cmd.arg = info->isdn_channel + (l2 << 8);
info->last_l2 = l2;
dev->drv[info->isdn_driver]->interface->command(&cmd);
cmd.driver = info->isdn_driver;
cmd.command = ISDN_CMD_SETL3;
cmd.arg = info->isdn_channel + (m->mdmreg[15] << 8);
dev->drv[info->isdn_driver]->interface->command(&cmd);
cmd.driver = info->isdn_driver;
cmd.arg = info->isdn_channel;
cmd.command = ISDN_CMD_ACCEPTD;
dev->drv[info->isdn_driver]->interface->command(&cmd);
} else
isdn_tty_modem_result(8, info);
1996-04-30 21:05:27 +00:00
}
#ifdef CONFIG_ISDN_AUDIO
/*
* Parse AT+F.. commands
*/
static int
isdn_tty_cmd_PLUSF(char **p, modem_info * info)
{
atemu *m = &info->emu;
int par;
char rs[20];
if (!strncmp(p[0], "CLASS", 5)) {
p[0] += 5;
switch (*p[0]) {
case '?':
p[0]++;
sprintf(rs, "\r\n%d",
(m->mdmreg[18] & 1) ? 8 : 0);
isdn_tty_at_cout(rs, info);
break;
case '=':
p[0]++;
switch (*p[0]) {
case '0':
p[0]++;
m->mdmreg[18] = 4;
info->xmit_size =
m->mdmreg[16] * 16;
break;
case '8':
p[0]++;
m->mdmreg[18] = 5;
info->xmit_size = VBUF;
break;
case '?':
p[0]++;
isdn_tty_at_cout("\r\n0,8",
info);
break;
default:
PARSE_ERROR1;
}
break;
default:
PARSE_ERROR1;
}
return 0;
}
if (!strncmp(p[0], "AA", 2)) {
p[0] += 2;
switch (*p[0]) {
case '?':
p[0]++;
sprintf(rs, "\r\n%d",
m->mdmreg[0]);
isdn_tty_at_cout(rs, info);
break;
case '=':
p[0]++;
par = isdn_getnum(p);
if ((par < 0) || (par > 255))
PARSE_ERROR1;
m->mdmreg[0] = par;
break;
default:
PARSE_ERROR1;
}
return 0;
}
PARSE_ERROR1;
}
/*
* Parse AT+V.. commands
*/
static int
isdn_tty_cmd_PLUSV(char **p, modem_info * info)
1996-04-30 21:05:27 +00:00
{
atemu *m = &info->emu;
static char *vcmd[] =
{"NH", "IP", "LS", "RX", "SD", "SM", "TX", NULL};
int i;
1996-04-30 21:05:27 +00:00
int par1;
int par2;
char rs[20];
i = 0;
while (vcmd[i]) {
if (!strncmp(vcmd[i], p[0], 2)) {
p[0] += 2;
break;
}
i++;
}
switch (i) {
case 0:
/* AT+VNH - Auto hangup feature */
switch (*p[0]) {
case '?':
p[0]++;
isdn_tty_at_cout("\r\n1", info);
break;
case '=':
p[0]++;
switch (*p[0]) {
case '1':
p[0]++;
break;
case '?':
p[0]++;
isdn_tty_at_cout("\r\n1", info);
break;
default:
PARSE_ERROR1;
}
break;
default:
PARSE_ERROR1;
}
break;
case 1:
/* AT+VIP - Reset all voice parameters */
isdn_tty_modem_reset_vpar(m);
break;
case 2:
/* AT+VLS - Select device, accept incoming call */
switch (*p[0]) {
case '?':
p[0]++;
sprintf(rs, "\r\n%d", m->vpar[0]);
isdn_tty_at_cout(rs, info);
break;
case '=':
p[0]++;
switch (*p[0]) {
case '0':
p[0]++;
m->vpar[0] = 0;
break;
case '2':
p[0]++;
m->vpar[0] = 2;
break;
case '?':
p[0]++;
isdn_tty_at_cout("\r\n0,2", info);
break;
default:
PARSE_ERROR1;
}
break;
default:
PARSE_ERROR1;
}
break;
case 3:
/* AT+VRX - Start recording */
if (!m->vpar[0])
PARSE_ERROR1;
if (info->online != 1) {
isdn_tty_modem_result(8, info);
return 1;
}
info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
if (!info->dtmf_state) {
printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
PARSE_ERROR1;
}
if (m->vpar[3] < 5) {
info->adpcmr = isdn_audio_adpcm_init(info->adpcmr, m->vpar[3]);
if (!info->adpcmr) {
printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
PARSE_ERROR1;
}
}
#ifdef ISDN_DEBUG_AT
printk(KERN_DEBUG "AT: +VRX\n");
#endif
info->vonline |= 1;
isdn_tty_modem_result(1, info);
return 0;
break;
case 4:
/* AT+VSD - Silence detection */
switch (*p[0]) {
case '?':
p[0]++;
sprintf(rs, "\r\n<%d>,<%d>",
m->vpar[1],
m->vpar[2]);
isdn_tty_at_cout(rs, info);
break;
case '=':
p[0]++;
switch (*p[0]) {
case '0':
case '1':
case '2':
case '3':
par1 = isdn_getnum(p);
if ((par1 < 0) || (par1 > 31))
PARSE_ERROR1;
if (*p[0] != ',')
PARSE_ERROR1;
p[0]++;
par2 = isdn_getnum(p);
if ((par2 < 0) || (par2 > 255))
PARSE_ERROR1;
m->vpar[1] = par1;
m->vpar[2] = par2;
break;
case '?':
p[0]++;
isdn_tty_at_cout("\r\n<0-31>,<0-255>",
info);
break;
default:
PARSE_ERROR1;
}
break;
default:
PARSE_ERROR1;
}
break;
case 5:
/* AT+VSM - Select compression */
switch (*p[0]) {
case '?':
p[0]++;
sprintf(rs, "\r\n<%d>,<%d><8000>",
m->vpar[3],
m->vpar[1]);
isdn_tty_at_cout(rs, info);
break;
case '=':
p[0]++;
switch (*p[0]) {
case '2':
case '3':
case '4':
case '5':
case '6':
par1 = isdn_getnum(p);
if ((par1 < 2) || (par1 > 6))
PARSE_ERROR1;
m->vpar[3] = par1;
break;
case '?':
p[0]++;
isdn_tty_at_cout("\r\n2;ADPCM;2;0;(8000)\r\n",
info);
isdn_tty_at_cout("3;ADPCM;3;0;(8000)\r\n",
info);
isdn_tty_at_cout("4;ADPCM;4;0;(8000)\r\n",
info);
isdn_tty_at_cout("5;ALAW;8;0;(8000)",
info);
isdn_tty_at_cout("6;ULAW;8;0;(8000)",
info);
break;
default:
PARSE_ERROR1;
}
break;
default:
PARSE_ERROR1;
}
break;
case 6:
/* AT+VTX - Start sending */
if (!m->vpar[0])
PARSE_ERROR1;
if (info->online != 1) {
isdn_tty_modem_result(8, info);
return 1;
}
info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state);
if (!info->dtmf_state) {
printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n");
PARSE_ERROR1;
}
if (m->vpar[3] < 5) {
info->adpcms = isdn_audio_adpcm_init(info->adpcms, m->vpar[3]);
if (!info->adpcms) {
printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n");
PARSE_ERROR1;
}
}
#ifdef ISDN_DEBUG_AT
printk(KERN_DEBUG "AT: +VTX\n");
#endif
m->lastDLE = 0;
info->vonline |= 2;
isdn_tty_modem_result(1, info);
return 0;
break;
default:
PARSE_ERROR1;
}
return 0;
1996-04-30 21:05:27 +00:00
}
#endif /* CONFIG_ISDN_AUDIO */
1996-04-30 21:05:27 +00:00
1996-01-09 04:13:18 +00:00
/*
* Parse and perform an AT-command-line.
*/
static void
isdn_tty_parse_at(modem_info * info)
1996-01-09 04:13:18 +00:00
{
atemu *m = &info->emu;
char *p;
char ds[40];
1996-01-09 04:13:18 +00:00
#ifdef ISDN_DEBUG_AT
printk(KERN_DEBUG "AT: '%s'\n", m->mdmcmd);
1996-01-09 04:13:18 +00:00
#endif
for (p = &m->mdmcmd[2]; *p;) {
switch (*p) {
case 'A':
/* A - Accept incoming call */
p++;
isdn_tty_cmd_ATA(info);
return;
break;
case 'D':
/* D - Dial */
isdn_tty_getdial(++p, ds);
p += strlen(p);
if (!strlen(m->msn))
isdn_tty_modem_result(10, info);
else if (strlen(ds))
isdn_tty_dial(ds, info, m);
else
PARSE_ERROR;
return;
case 'E':
/* E - Turn Echo on/off */
p++;
switch (isdn_getnum(&p)) {
case 0:
m->mdmreg[12] &= ~4;
break;
case 1:
m->mdmreg[12] |= 4;
break;
default:
PARSE_ERROR;
}
break;
case 'H':
/* H - On/Off-hook */
p++;
switch (*p) {
case '0':
p++;
isdn_tty_on_hook(info);
break;
case '1':
p++;
isdn_tty_off_hook();
break;
default:
isdn_tty_on_hook(info);
break;
}
break;
case 'I':
/* I - Information */
p++;
isdn_tty_at_cout("\r\nLinux ISDN", info);
switch (*p) {
case '0':
case '1':
p++;
break;
case '2':
p++;
isdn_tty_report(info);
break;
default:
}
break;
case 'O':
/* O - Go online */
p++;
if (info->msr & UART_MSR_DCD)
/* if B-Channel is up */
isdn_tty_modem_result(5, info);
else
isdn_tty_modem_result(3, info);
return;
case 'Q':
/* Q - Turn Emulator messages on/off */
p++;
switch (isdn_getnum(&p)) {
case 0:
m->mdmreg[12] |= 1;
break;
case 1:
m->mdmreg[12] &= ~1;
break;
default:
PARSE_ERROR;
}
break;
case 'S':
/* S - Set/Get Register */
p++;
if (isdn_tty_cmd_ATS(&p, info))
return;
break;
case 'V':
/* V - Numeric or ASCII Emulator-messages */
p++;
switch (isdn_getnum(&p)) {
case 0:
m->mdmreg[12] |= 2;
break;
case 1:
m->mdmreg[12] &= ~2;
break;
default:
PARSE_ERROR;
}
break;
case 'Z':
/* Z - Load Registers from Profile */
p++;
isdn_tty_modem_reset_regs(info, 1);
break;
1996-04-30 21:05:27 +00:00
#ifdef CONFIG_ISDN_AUDIO
case '+':
p++;
switch (*p) {
case 'F':
p++;
if (isdn_tty_cmd_PLUSF(&p, info))
return;
break;
case 'V':
if (!(m->mdmreg[18] & 1))
PARSE_ERROR;
p++;
if (isdn_tty_cmd_PLUSV(&p, info))
return;
break;
default:
PARSE_ERROR;
}
break;
#endif /* CONFIG_ISDN_AUDIO */
case '&':
p++;
if (isdn_tty_cmd_ATand(&p, info))
return;
break;
default:
PARSE_ERROR;
}
}
#ifdef CONFIG_ISDN_AUDIO
if (!info->vonline)
#endif
isdn_tty_modem_result(0, info);
1996-01-09 04:13:18 +00:00
}
/* Need own toupper() because standard-toupper is not available
* within modules.
*/
#define my_toupper(c) (((c>='a')&&(c<='z'))?(c&0xdf):c)
/*
* Perform line-editing of AT-commands
*
* Parameters:
* p inputbuffer
* count length of buffer
* channel index to line (minor-device)
* user flag: buffer is in userspace
*/
static int
isdn_tty_edit_at(const char *p, int count, modem_info * info, int user)
1996-01-09 04:13:18 +00:00
{
atemu *m = &info->emu;
1996-01-09 04:13:18 +00:00
int total = 0;
u_char c;
char eb[2];
int cnt;
for (cnt = count; cnt > 0; p++, cnt--) {
if (user)
GET_USER(c, p);
1996-01-09 04:13:18 +00:00
else
c = *p;
total++;
if (c == m->mdmreg[3] || c == m->mdmreg[4]) {
/* Separator (CR oder LF) */
m->mdmcmd[m->mdmcmdl] = 0;
if (m->mdmreg[12] & 4) {
eb[0] = c;
eb[1] = 0;
isdn_tty_at_cout(eb, info);
}
if (m->mdmcmdl >= 2)
isdn_tty_parse_at(info);
m->mdmcmdl = 0;
continue;
}
if (c == m->mdmreg[5] && m->mdmreg[5] < 128) {
/* Backspace-Funktion */
if ((m->mdmcmdl > 2) || (!m->mdmcmdl)) {
if (m->mdmcmdl)
m->mdmcmdl--;
if (m->mdmreg[12] & 4)
isdn_tty_at_cout("\b", info);
}
continue;
}
if (cmdchar(c)) {
if (m->mdmreg[12] & 4) {
eb[0] = c;
eb[1] = 0;
isdn_tty_at_cout(eb, info);
}
if (m->mdmcmdl < 255) {
c = my_toupper(c);
switch (m->mdmcmdl) {
case 0:
if (c == 'A')
m->mdmcmd[m->mdmcmdl++] = c;
break;
case 1:
if (c == 'T')
m->mdmcmd[m->mdmcmdl++] = c;
break;
default:
m->mdmcmd[m->mdmcmdl++] = c;
1996-01-09 04:13:18 +00:00
}
}
}
}
return total;
}
/*
* Switch all modem-channels who are online and got a valid
* escape-sequence 1.5 seconds ago, to command-mode.
* This function is called every second via timer-interrupt from within
1996-01-09 04:13:18 +00:00
* timer-dispatcher isdn_timer_function()
*/
void
isdn_tty_modem_escape(void)
1996-01-09 04:13:18 +00:00
{
int ton = 0;
int i;
int midx;
for (i = 0; i < ISDN_MAX_CHANNELS; i++)
if (USG_MODEM(dev->usage[i]))
if ((midx = dev->m_idx[i]) >= 0) {
modem_info *info = &dev->mdm.info[midx];
if (info->online) {
1996-01-09 04:13:18 +00:00
ton = 1;
if ((info->emu.pluscount == 3) &&
((jiffies - info->emu.lastplus) > PLUSWAIT2)) {
info->emu.pluscount = 0;
info->online = 0;
isdn_tty_modem_result(0, info);
1996-01-09 04:13:18 +00:00
}
}
}
1996-01-09 04:13:18 +00:00
isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, ton);
}
/*
* Put a RING-message to all modem-channels who have the RI-bit set.
* This function is called every second via timer-interrupt from within
1996-01-09 04:13:18 +00:00
* timer-dispatcher isdn_timer_function()
*/
void
isdn_tty_modem_ring(void)
1996-01-09 04:13:18 +00:00
{
int ton = 0;
int i;
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
modem_info *info = &dev->mdm.info[i];
if (info->msr & UART_MSR_RI) {
ton = 1;
isdn_tty_modem_result(2, info);
}
}
1996-01-09 04:13:18 +00:00
isdn_timer_ctrl(ISDN_TIMER_MODEMRING, ton);
}
/*
* For all online tty's, try sending data to
* the lower levels.
*/
void
isdn_tty_modem_xmit(void)
1996-01-09 04:13:18 +00:00
{
int ton = 1;
1996-01-09 04:13:18 +00:00
int i;
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
modem_info *info = &dev->mdm.info[i];
if (info->online) {
ton = 1;
isdn_tty_senddown(info);
isdn_tty_tint(info);
}
}
1996-01-09 04:13:18 +00:00
isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, ton);
}