62 lines
1.5 KiB
Groff
62 lines
1.5 KiB
Groff
.TH TELESCTRL 8 "3. December 1995"
|
|
.UC 4
|
|
.SH NAME
|
|
telesctrl \- configure Teles-Module-logging
|
|
.SH SYNOPSIS
|
|
telesctrl [-d DriverId] 1 <LogFlags>
|
|
.br
|
|
.SH DESCRIPTION
|
|
.I telesctrl
|
|
is used to setup the logging-level of the Teles-ISDN devicedriver. All
|
|
logging-output is sent to the device /dev/isdnctrl. So you can show it
|
|
by executing "cat /dev/isdnctrl".
|
|
.LP
|
|
The use of
|
|
.I telesctrl
|
|
makes sense, if you are using an Teles-card only.
|
|
.LP
|
|
.SH OPTIONS
|
|
.TP 5
|
|
.B -d DriverId
|
|
is used to identify the driver when using more than one Teles-card. While
|
|
loading the module with
|
|
.I insmod,
|
|
the driverId is set by appending
|
|
.I id=MyId
|
|
to the normal insmod-commandline. For this feature insmod from the package
|
|
.I modules-1.2.8
|
|
or newer should be used as it supports string-initializations.
|
|
.LP
|
|
The
|
|
.I LogFlags
|
|
are given as a bit-coded integer with the following values:
|
|
.TP 5
|
|
.B 1 Link-level <--> Hardware-level communication.
|
|
If this bit is set all communication between the isdn-module and the
|
|
teles-module is logged.
|
|
.TP 5
|
|
.B 2 Top statemachine
|
|
If this bit is set, all state-changes of the top statemachine are logged.
|
|
.TP 5
|
|
.B 4 D-channel Q.931
|
|
If this bit is set, all Q.931-messages (call-control) are logged.
|
|
.TP 5
|
|
.B 8 D-channel Q.921
|
|
If this bit is set, all Q.921-messages are logged.
|
|
.TP 5
|
|
.B 16 B-channel X.75
|
|
If this bit is set, all B-channel X.75 events are logged.
|
|
.LP
|
|
.SH AUTHOR
|
|
Fritz Elfert <fritz@wuemaus.franken.de>
|
|
.LP
|
|
.SH SEE ALSO
|
|
.I ttyI\c
|
|
\&(4),
|
|
.I isdnctrl\c
|
|
\&(8),
|
|
.I telesctrl\c
|
|
\&(8),
|
|
.I isdninfo\c
|
|
\&(4).
|