85 lines
2.6 KiB
Groff
85 lines
2.6 KiB
Groff
.TH ICNCTRL 8 "3. September 1995"
|
|
.UC 4
|
|
.SH NAME
|
|
icnctrl \- configure ICN-ISDN-adaptor
|
|
.SH SYNOPSIS
|
|
icnctrl [-d DriverId] action options ...
|
|
.br
|
|
.SH DESCRIPTION
|
|
.I icnctrl
|
|
is used to setup the ICN-ISDN devicedriver and for downloading the
|
|
firmware into the ISDN-card.
|
|
.LP
|
|
The use of
|
|
.I icnctrl
|
|
makes sense, if you are using an ICN-card only.
|
|
.LP
|
|
.SH OPTIONS
|
|
.TP 5
|
|
.B -d DriverId
|
|
is used to identify the driver when using more than one ICN-card. For every
|
|
card, a icn-moudule has to be loaded into the kernel-space. While loading
|
|
the module with
|
|
.I insmod,
|
|
the driverId is set by appending
|
|
.I id=MyId
|
|
to the normal insmod-commandline. For this feature insmod from the package
|
|
.I modules-1.2.8
|
|
or newer should be used as it supports string-initializations.
|
|
.LP
|
|
The following
|
|
.I actions
|
|
may be given to
|
|
.I icnctrl.
|
|
.TP 5
|
|
.B add port [id1 [id2]]
|
|
Enables support for an additional card in the driver. If id1 and id2
|
|
are missing, adds an ICN-2B with an id given by the system. with id2
|
|
missing, adds an ICN-2B with an id given by the user. With both ids
|
|
given, adds an ICN-4B with both ids given by the user. There is
|
|
no checking against port-conflicts. Ports are checked at first activation
|
|
while downloading the firmware and can be changed at runtime. Ids are
|
|
checked against conflicts, and if a conflict happens, replaced by the
|
|
system in the same manner as if no id was given.
|
|
.TP 5
|
|
.B io [baseadress port]
|
|
Sets the adress of the Memory-mapped IO-region and the port-base.
|
|
After loading the icn-module into kernel-space, this command
|
|
should be used as the very first setup, if the hardware settings are
|
|
different from the default settings below.
|
|
If both parameters are omitted, prints out current settings. The
|
|
default memory-adress is 0xD0000, the default port-base is 0x320.
|
|
The ICN-Card uses 4 port-adresses.
|
|
.TP 5
|
|
.B leased <on|off>
|
|
Switches between normal (dialup) and leased-line mode. Leased-line-mode
|
|
is intended for usage with S64K-lines. These lines do not have a D-Channel.
|
|
.TP 5
|
|
.B load <bootcode> <firmware>
|
|
Downloads the firmware into the card and starts operation. Using this
|
|
command, after loading the icn-module into kernel-space the first real
|
|
access to the hardware is done. Therefore the
|
|
.I io
|
|
-command above, should be used before, if the hardware settings are different
|
|
from the default settings.
|
|
Usually the bootcode is called
|
|
.I loadpg.bin.
|
|
The firmware depends on the type of ISDN-line. For german 1TR6-lines, the
|
|
firmware is called
|
|
.I pc_1t_ca.bin.
|
|
For Euro-ISDN-lines, it is called
|
|
.I pc_eu_ca.bin.
|
|
.LP
|
|
.SH AUTHOR
|
|
Fritz Elfert <fritz@wuemaus.franken.de>
|
|
.LP
|
|
.SH SEE ALSO
|
|
.I ttyI\c
|
|
\&(4),
|
|
.I isdnctrl\c
|
|
\&(8),
|
|
.I telesctrl\c
|
|
\&(8),
|
|
.I isdninfo\c
|
|
\&(4).
|