118 lines
3.2 KiB
Groff
118 lines
3.2 KiB
Groff
.TH vboxgetty.conf 5 "March 2003" "ISDN 4 Linux @I4LVERSION@" "Linux System Administration"
|
|
.PD 0
|
|
.SH NAME
|
|
vboxgetty.conf \- config file for vboxgetty
|
|
|
|
.SH Description
|
|
The file
|
|
.B @I4LCONFDIR@/vboxgetty.conf
|
|
is used to configure vboxgetty. Please read the man page vboxgetty(8) for
|
|
a description of how vboxgetty works.
|
|
|
|
Everything after "#" is ignored, as are empty lines. All arguments
|
|
must be separated by whitespace (spaces, tabs). Arguments may not contain
|
|
whitespace.
|
|
|
|
All settings before the first
|
|
.B port
|
|
command are global settings, after a port command they only affect the
|
|
current port.
|
|
|
|
.TP
|
|
.B port <string>
|
|
ISDN device to configure.
|
|
|
|
.TP
|
|
.B modeminit <string>
|
|
Command to initialize the modem. You should set the MSN/EAZ on which
|
|
vboxgetty should listen for incoming calls. Default is "ATZ".
|
|
|
|
.TP
|
|
.B user <string>
|
|
Name of the user that vboxgetty will use. This user must exist in
|
|
/etc/passwd and you must use this parameter.
|
|
|
|
.TP
|
|
.B group <string>
|
|
Name of the group that vboxgetty will use. This group must exist in
|
|
/etc/group and you must use this parameter.
|
|
|
|
.TP
|
|
.B umask <number>
|
|
Vboxgetty will use this umask when creating new files. You must give the
|
|
umask as an octal number. Default is 077.
|
|
|
|
.TP
|
|
.B dropdtrtime <seconds>
|
|
Number of milliseconds to hold the DTR-Line low to reset the modem.
|
|
Default value is 800.
|
|
|
|
.TP
|
|
.B initpause <number>
|
|
Number of milliseconds to wait after initializing the modem. This is used
|
|
to compensate the delay of the "NO CARRIER" response. Default value is
|
|
1500.
|
|
|
|
.TP
|
|
.B badinitsexit <number>
|
|
Maximum failures with modeminit. If this number is reached, vboxgetty
|
|
exits. Default is 0.
|
|
|
|
|
|
.TP
|
|
.B ringtimeout <number>
|
|
Time in seconds to wait for a RING. If no RING is received within this time,
|
|
no call is taken. Default is 5.
|
|
|
|
.TP
|
|
.B echotimeout <number>
|
|
Time in seconds to wait for the echo from the modem. Default is 4.
|
|
|
|
.TP
|
|
.B commandtimeout <number>
|
|
Time in seconds to wait for a response to a modem command. Default is 4.
|
|
|
|
.TP
|
|
.B alivetimeout <number>
|
|
After this time in seconds vboxgetty will check if the modem is still
|
|
responding to modem commands. Default is 1800.
|
|
|
|
.TP
|
|
.B compression <string>
|
|
Audio compression to use to record new messages. Possible values are
|
|
ADPCM-2, ADPCM-3, ADPCM-4 and ULAW. The ALAW compression mode is no
|
|
longer supported. Default is ULAW.
|
|
|
|
.TP
|
|
.B spooldir <string>
|
|
Spool directory to use. This directory must exist. It's used for control
|
|
files of several programs. Default is @SPOOLDIR@/<user>.
|
|
|
|
.TP
|
|
.B vboxconfig <string>
|
|
Full path of the vbox config file. Default value is <spooldir>/vbox.conf.
|
|
|
|
.TP
|
|
.B freespace <number>
|
|
Number of bytes that must be available on the partition with the spool
|
|
directory, so that a call may be taken. Default is 0.
|
|
|
|
.TP
|
|
.B debuglevel <string>
|
|
What messages are be written to @LOGFILEDIR@/vboxgetty-<device>.log.
|
|
The string consists of letters representing the severities of the messages
|
|
to log (F=FATAL, E=ERROR, W=WARNING, I=INFO, D=DEBUG, J=JUNK). Default
|
|
is FEWI.
|
|
|
|
.SH FILES
|
|
.TP
|
|
.B @I4LCONFDIR@/vboxgetty.conf
|
|
this configuration file
|
|
|
|
.SH SEE ALSO
|
|
.B vboxgetty(8), vbox(5), vboxtcl(5)
|
|
|
|
.SH AUTHOR
|
|
This manual page was written by Andreas Jellinghaus <aj@dungeon.inka.de>,
|
|
for Debian GNU/Linux and isdn4linux.
|