963 lines
39 KiB
C
963 lines
39 KiB
C
#ifndef __CAPI20_H
|
|
#define __CAPI20_H
|
|
|
|
#include <sys/time.h>
|
|
#include <time.h>
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*----- basic-type definitions -----*/
|
|
|
|
typedef unsigned char *CAPI_MESSAGE;
|
|
typedef unsigned char _cbyte;
|
|
typedef unsigned short _cword;
|
|
typedef unsigned long _cdword;
|
|
typedef CAPI_MESSAGE _cstruct;
|
|
typedef enum { CAPI_COMPOSE = 0, CAPI_DEFAULT = 1 } _cmstruct;
|
|
|
|
/*----- errornumbers -----*/
|
|
|
|
typedef enum {
|
|
CapiToManyAppls =0x1001,
|
|
CapiLogBlkSizeToSmall =0x1002,
|
|
CapiBuffExeceeds64k =0x1003,
|
|
CapiMsgBufSizeToSmall =0x1004,
|
|
CapiAnzLogConnNotSupported =0x1005,
|
|
CapiRegReserved =0x1006,
|
|
CapiRegBusy =0x1007,
|
|
CapiRegOSResourceErr =0x1008,
|
|
CapiRegNotInstalled =0x1009,
|
|
CapiRegCtrlerNotSupportExtEquip =0x100a,
|
|
CapiRegCtrlerOnlySupportExtEquip =0x100b
|
|
} CAPI_REGISTER_ERROR;
|
|
|
|
typedef enum {
|
|
CapiNoError =0x0000,
|
|
CapiIllAppNr =0x1101,
|
|
CapiIllCmdOrSubcmdOrMsgToSmall =0x1102,
|
|
CapiSendQueueFull =0x1103,
|
|
CapiReceiveQueueEmpty =0x1104,
|
|
CapiReceiveOverflow =0x1105,
|
|
CapiUnknownNotPar =0x1106,
|
|
CapiMsgBusy =0x1107,
|
|
CapiMsgOSResourceErr =0x1108,
|
|
CapiMsgNotInstalled =0x1109,
|
|
CapiMsgCtrlerNotSupportExtEquip =0x110a,
|
|
CapiMsgCtrlerOnlySupportExtEquip =0x110b
|
|
} MESSAGE_EXCHANGE_ERROR;
|
|
|
|
/*----- CAPI commands -----*/
|
|
|
|
#define CAPI_ALERT 0x01
|
|
#define CAPI_CONNECT 0x02
|
|
#define CAPI_CONNECT_ACTIVE 0x03
|
|
#define CAPI_CONNECT_B3_ACTIVE 0x83
|
|
#define CAPI_CONNECT_B3 0x82
|
|
#define CAPI_CONNECT_B3_T90_ACTIVE 0x88
|
|
#define CAPI_DATA_B3 0x86
|
|
#define CAPI_DISCONNECT_B3 0x84
|
|
#define CAPI_DISCONNECT 0x04
|
|
#define CAPI_FACILITY 0x80
|
|
#define CAPI_INFO 0x08
|
|
#define CAPI_LISTEN 0x05
|
|
#define CAPI_MANUFACTURER 0xff
|
|
#define CAPI_RESET_B3 0x87
|
|
#define CAPI_SELECT_B_PROTOCOL 0x41
|
|
|
|
/*----- CAPI subcommands -----*/
|
|
|
|
#define CAPI_REQ 0x80
|
|
#define CAPI_CONF 0x81
|
|
#define CAPI_IND 0x82
|
|
#define CAPI_RESP 0x83
|
|
|
|
/* standard CAPI2.0 functions */
|
|
|
|
unsigned capi20_isinstalled (void);
|
|
|
|
_cword capi20_register (unsigned MaxB3Connection,
|
|
unsigned MaxB3Blks,
|
|
unsigned MaxSizeB3,
|
|
CAPI_REGISTER_ERROR *ErrorCode);
|
|
|
|
MESSAGE_EXCHANGE_ERROR capi20_release (unsigned Appl_Id);
|
|
|
|
MESSAGE_EXCHANGE_ERROR capi20_put_message (CAPI_MESSAGE Msg, unsigned Appl_Id);
|
|
|
|
MESSAGE_EXCHANGE_ERROR capi20_get_message (unsigned Appl_Id, CAPI_MESSAGE *ReturnMessage);
|
|
|
|
CAPI_MESSAGE capi20_get_manufacturer (unsigned contr, CAPI_MESSAGE LpBuffer);
|
|
|
|
CAPI_MESSAGE capi20_get_version (unsigned contr, CAPI_MESSAGE version);
|
|
|
|
CAPI_MESSAGE capi20_get_serial_number (unsigned contr, CAPI_MESSAGE LpBuffer);
|
|
|
|
MESSAGE_EXCHANGE_ERROR capi20_get_profile (unsigned Controller, CAPI_MESSAGE LpBuffer);
|
|
|
|
/* CAPI2.0 Spec names */
|
|
#define CAPI20_REGISTER capi20_register
|
|
#define CAPI20_RELEASE capi20_release
|
|
#define CAPI20_PUT_MESSAGE capi20_put_message
|
|
#define CAPI20_GET_MESSAGE capi20_get_message
|
|
#define CAPI20_GET_MANUFACTURER capi20_get_manufacturer
|
|
#define CAPI20_GET_VERSION capi20_get_version
|
|
#define CAPI20_GET_SERIAL_NUMBER capi20_get_serial_number
|
|
#define CAPI20_GET_PROFILE capi20_get_profile
|
|
#define CAPI20_ISINSTALLED capi20_isinstalled
|
|
#define CAPI_CMSG_HEADER capi_cmsg_header
|
|
#define CAPI_GET_CMSG capi_get_cmsg
|
|
#define CAPI_PUT_CMSG capi_put_cmsg
|
|
|
|
/* extra functions */
|
|
#define CAPI20_WaitforMessage capi20_waitformessage
|
|
MESSAGE_EXCHANGE_ERROR capi20_waitformessage(_cword Appl_Id, struct timeval *tvp);
|
|
|
|
int capi20_fileno(_cword applid);
|
|
|
|
/*
|
|
* The _cmsg structure contains all possible CAPI 2.0 parameter.
|
|
* All parameters are stored here first. The function capi_cmsg2message()
|
|
* assembles the parameter and builds CAPI2.0 conform messages.
|
|
* capi_message2cmsg disassembles CAPI 2.0 messages and stores the
|
|
* parameter in the _cmsg structure
|
|
*/
|
|
|
|
typedef struct {
|
|
/* Header */
|
|
_cword ApplId;
|
|
_cbyte Command;
|
|
_cbyte Subcommand;
|
|
_cword Messagenumber;
|
|
|
|
/* Parameter */
|
|
union {
|
|
_cdword adrController;
|
|
_cdword adrPLCI;
|
|
_cdword adrNCCI;
|
|
} adr;
|
|
|
|
_cmstruct AdditionalInfo;
|
|
_cstruct B1configuration;
|
|
_cword B1protocol;
|
|
_cstruct B2configuration;
|
|
_cword B2protocol;
|
|
_cstruct B3configuration;
|
|
_cword B3protocol;
|
|
_cstruct BC;
|
|
_cstruct BChannelinformation;
|
|
_cmstruct BProtocol;
|
|
_cstruct CalledPartyNumber;
|
|
_cstruct CalledPartySubaddress;
|
|
_cstruct CallingPartyNumber;
|
|
_cstruct CallingPartySubaddress;
|
|
_cdword CIPmask;
|
|
_cdword CIPmask2;
|
|
_cword CIPValue;
|
|
_cdword Class;
|
|
_cstruct ConnectedNumber;
|
|
_cstruct ConnectedSubaddress;
|
|
_cdword Data;
|
|
_cword DataHandle;
|
|
_cword DataLength;
|
|
_cstruct FacilityConfirmationParameter;
|
|
_cstruct Facilitydataarray;
|
|
_cstruct FacilityIndicationParameter;
|
|
_cstruct FacilityRequestParameter;
|
|
_cstruct FacilityResponseParameters;
|
|
_cword FacilitySelector;
|
|
_cword Flags;
|
|
_cdword Function;
|
|
_cstruct HLC;
|
|
_cword Info;
|
|
_cstruct InfoElement;
|
|
_cdword InfoMask;
|
|
_cword InfoNumber;
|
|
_cstruct Keypadfacility;
|
|
_cstruct LLC;
|
|
_cstruct ManuData;
|
|
_cdword ManuID;
|
|
_cstruct NCPI;
|
|
_cword Reason;
|
|
_cword Reason_B3;
|
|
_cword Reject;
|
|
_cstruct Useruserdata;
|
|
|
|
/* intern */
|
|
unsigned l,p;
|
|
unsigned char *par;
|
|
CAPI_MESSAGE m;
|
|
} _cmsg;
|
|
|
|
unsigned capi_cmsg2message(_cmsg *cmsg, CAPI_MESSAGE msg);
|
|
|
|
unsigned capi_message2cmsg (_cmsg *cmsg, CAPI_MESSAGE msg);
|
|
|
|
/*
|
|
* capi_put_cmsg() works like capi_put_message() but it converts the _cmsg
|
|
* first with capi_cmsg2message(). Possible errors from capi_put_message()
|
|
* will be returned.
|
|
*/
|
|
|
|
unsigned capi_put_cmsg(_cmsg *cmsg);
|
|
|
|
/*
|
|
* capi_get_cmsg() works like capi_get_message() and converts the CAPI message
|
|
* to a _cmsg with capi_message2cmsg(). Possible errors from capi_get_message()
|
|
* will be returned.
|
|
*/
|
|
unsigned capi_get_cmsg(_cmsg *cmsg, unsigned applid);
|
|
|
|
/*
|
|
* capi_cmsg_header() fills the _cmsg structure with default values, so only
|
|
* parameter with non default values must be changed before sending the
|
|
* message.
|
|
*/
|
|
unsigned capi_cmsg_header (_cmsg *cmsg, _cword _ApplId, _cbyte _Command, _cbyte _Subcommand, _cword _Messagenumber, _cdword _Controller);
|
|
|
|
/*
|
|
* capi_cmsg_answer() is used to answer indications. It changes the header
|
|
* of an indication to a response, and leaves all other parameters the same
|
|
*/
|
|
unsigned capi_cmsg_answer (_cmsg *cmsg);
|
|
|
|
/*----- defines to access specific parameter -----*/
|
|
|
|
#define ALERT_REQ_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define ALERT_REQ_ADDITIONALINFO(x) ((x)->AdditionalInfo)
|
|
/* Additional info elements */
|
|
#define ALERT_REQ_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
|
|
#define ALERT_REQ_KEYPADFACILITY(x) ((x)->Keypadfacility)
|
|
/* coded according to ETS 300 102-1 / Q.931 */
|
|
#define ALERT_REQ_USERUSERDATA(x) ((x)->Useruserdata)
|
|
/* coded according to ETS 300 102-1 / Q.931 */
|
|
#define ALERT_REQ_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
|
|
/* which is used to transfer additional parameters coded */
|
|
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
|
|
/* This field is used to transport one or more complete facility */
|
|
/* data information elements. */
|
|
#define ALERT_CONF_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define ALERT_CONF_INFO(x) ((x)->Info)
|
|
/* 0: alert initiated */
|
|
/* 0x0003: alert already sent by another application */
|
|
/* 0x2001: message not supported in current state */
|
|
/* 0x2002: illegal PLCI */
|
|
/* 0x2007: illegal message parameter coding */
|
|
#define CONNECT_REQ_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define CONNECT_REQ_CIPVALUE(x) ((x)->CIPValue)
|
|
/* Compatibility Information Profile */
|
|
#define CONNECT_REQ_CALLEDPARTYNUMBER(x) ((x)->CalledPartyNumber)
|
|
/* Called party number */
|
|
#define CONNECT_REQ_CALLINGPARTYNUMBER(x) ((x)->CallingPartyNumber)
|
|
/* Calling party number */
|
|
#define CONNECT_REQ_CALLEDPARTYSUBADDRESS(x) ((x)->CalledPartySubaddress)
|
|
/* Called party subaddress */
|
|
#define CONNECT_REQ_CALLINGPARTYSUBADDRESS(x) ((x)->CallingPartySubaddress)
|
|
/* Calling party subaddress */
|
|
#define CONNECT_REQ_BPROTOCOL(x) ((x)->BProtocol)
|
|
/* B protocol to be used */
|
|
#define CONNECT_REQ_B1PROTOCOL(x) ((x)->B1protocol)
|
|
/* Physical layer and framing */
|
|
#define CONNECT_REQ_B2PROTOCOL(x) ((x)->B2protocol)
|
|
/* Data link layer */
|
|
#define CONNECT_REQ_B3PROTOCOL(x) ((x)->B3protocol)
|
|
/* Network layer */
|
|
#define CONNECT_REQ_B1CONFIGURATION(x) ((x)->B1configuration)
|
|
/* Physical layer and framing parameter */
|
|
#define CONNECT_REQ_B2CONFIGURATION(x) ((x)->B2configuration)
|
|
/* Data link layer parameter */
|
|
#define CONNECT_REQ_B3CONFIGURATION(x) ((x)->B3configuration)
|
|
/* Network layer parameter */
|
|
#define CONNECT_REQ_BC(x) ((x)->BC)
|
|
/* Bearer Capability */
|
|
#define CONNECT_REQ_LLC(x) ((x)->LLC)
|
|
/* Low Layer Compatibility */
|
|
#define CONNECT_REQ_HLC(x) ((x)->HLC)
|
|
/* High Layer Compatibility */
|
|
#define CONNECT_REQ_ADDITIONALINFO(x) ((x)->AdditionalInfo)
|
|
/* Additional information elements */
|
|
#define CONNECT_REQ_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
|
|
#define CONNECT_REQ_KEYPADFACILITY(x) ((x)->Keypadfacility)
|
|
/* coded according to ETS 300 102-1 / Q.931 */
|
|
#define CONNECT_REQ_USERUSERDATA(x) ((x)->Useruserdata)
|
|
/* coded according to ETS 300 102-1 / Q.931 */
|
|
#define CONNECT_REQ_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
|
|
/* which is used to transfer additional parameters coded */
|
|
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
|
|
/* This field is used to transport one or more complete facility */
|
|
/* data information elements. */
|
|
#define CONNECT_CONF_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define CONNECT_CONF_INFO(x) ((x)->Info)
|
|
/* 0: connect initiated */
|
|
/* 0x2002: illegal controller */
|
|
/* 0x2003: out of PLCI */
|
|
/* 0x2007: illegal message parameter coding */
|
|
/* 0x3001: B1 protocol not supported */
|
|
/* 0x3002: B2 protocol not supported */
|
|
/* 0x3003: B3 protocol not supported */
|
|
/* 0x3004: B1 protocol parameter not supported */
|
|
/* 0x3005: B2 protocol parameter not supported */
|
|
/* 0x3006: B3 protocol parameter not supported */
|
|
/* 0x3007: B protocol combination not supported */
|
|
/* 0x300A: CIP Value unknown */
|
|
#define CONNECT_IND_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define CONNECT_IND_CIPVALUE(x) ((x)->CIPValue)
|
|
/* Compatibility Information Profile */
|
|
#define CONNECT_IND_CALLEDPARTYNUMBER(x) ((x)->CalledPartyNumber)
|
|
/* Called party number */
|
|
#define CONNECT_IND_CALLINGPARTYNUMBER(x) ((x)->CallingPartyNumber)
|
|
/* Calling party number */
|
|
#define CONNECT_IND_CALLEDPARTYSUBADDRESS(x) ((x)->CalledPartySubaddress)
|
|
/* Called party subaddress */
|
|
#define CONNECT_IND_CALLINGPARTYSUBADDRESS(x) ((x)->CallingPartySubaddress)
|
|
/* Calling party subaddress */
|
|
#define CONNECT_IND_BC(x) ((x)->BC)
|
|
/* Bearer compatibility */
|
|
#define CONNECT_IND_LLC(x) ((x)->LLC)
|
|
/* Low Layer Compatibility */
|
|
#define CONNECT_IND_HLC(x) ((x)->HLC)
|
|
/* High Layer Compatibility */
|
|
#define CONNECT_IND_ADDITIONALINFO(x) ((x)->AdditionalInfo)
|
|
/* Additional information elements */
|
|
#define CONNECT_IND_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
|
|
#define CONNECT_IND_KEYPADFACILITY(x) ((x)->Keypadfacility)
|
|
/* coded according to ETS 300 102-1 / Q.931 */
|
|
#define CONNECT_IND_USERUSERDATA(x) ((x)->Useruserdata)
|
|
/* coded according to ETS 300 102-1 / Q.931 */
|
|
#define CONNECT_IND_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
|
|
/* which is used to transfer additional parameters coded */
|
|
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
|
|
/* This field is used to transport one or more complete facility */
|
|
/* data information elements. */
|
|
#define CONNECT_RESP_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define CONNECT_RESP_REJECT(x) ((x)->Reject)
|
|
/* 0: accept call */
|
|
/* 1: ignore call */
|
|
/* 2: reject call, normal call clearing */
|
|
/* 3: reject call, user busy */
|
|
/* 4: reject call, requestet circuit/channel not available */
|
|
/* 5: reject call, facility rejected */
|
|
/* 6: reject call, channel unacceptable */
|
|
/* 7: reject call, incompatible destination */
|
|
/* 8: reject call, destination out of order */
|
|
#define CONNECT_RESP_BPROTOCOL(x) ((x)->BProtocol)
|
|
/* B protocol to be used */
|
|
#define CONNECT_RESP_B1PROTOCOL(x) ((x)->B1protocol)
|
|
/* Physical layer and framing */
|
|
#define CONNECT_RESP_B2PROTOCOL(x) ((x)->B2protocol)
|
|
/* Data link layer */
|
|
#define CONNECT_RESP_B3PROTOCOL(x) ((x)->B3protocol)
|
|
/* Network layer */
|
|
#define CONNECT_RESP_B1CONFIGURATION(x) ((x)->B1configuration)
|
|
/* Physical layer and framing parameter */
|
|
#define CONNECT_RESP_B2CONFIGURATION(x) ((x)->B2configuration)
|
|
/* Data link layer parameter */
|
|
#define CONNECT_RESP_B3CONFIGURATION(x) ((x)->B3configuration)
|
|
/* Network layer parameter */
|
|
#define CONNECT_RESP_CONNECTEDNUMBER(x) ((x)->ConnectedNumber)
|
|
/* Connected number */
|
|
#define CONNECT_RESP_CONNECTEDSUBADDRESS(x) ((x)->ConnectedSubaddress)
|
|
/* Connected subaddress */
|
|
#define CONNECT_RESP_LLC(x) ((x)->LLC)
|
|
/* Low Layer Compatibility */
|
|
#define CONNECT_RESP_ADDITIONALINFO(x) ((x)->AdditionalInfo)
|
|
/* Additional information elements */
|
|
#define CONNECT_RESP_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
|
|
#define CONNECT_RESP_KEYPADFACILITY(x) ((x)->Keypadfacility)
|
|
/* coded according to ETS 300 102-1 / Q.931 */
|
|
#define CONNECT_RESP_USERUSERDATA(x) ((x)->Useruserdata)
|
|
/* coded according to ETS 300 102-1 / Q.931 */
|
|
#define CONNECT_RESP_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
|
|
/* which is used to transfer additional parameters coded */
|
|
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
|
|
/* This field is used to transport one or more complete facility */
|
|
/* data information elements. */
|
|
#define CONNECT_ACTIVE_IND_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define CONNECT_ACTIVE_IND_CONNECTEDNUMBER(x) ((x)->ConnectedNumber)
|
|
/* Connected number */
|
|
#define CONNECT_ACTIVE_IND_CONNECTEDSUBADDRESS(x) ((x)->ConnectedSubaddress)
|
|
/* Connected subaddress */
|
|
#define CONNECT_ACTIVE_IND_LLC(x) ((x)->LLC)
|
|
/* Low Layer Compatibility */
|
|
#define CONNECT_ACTIVE_RESP_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define CONNECT_B3_ACTIVE_IND_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define CONNECT_B3_ACTIVE_IND_NCPI(x) ((x)->NCPI)
|
|
/* Network Control Protocol Information */
|
|
#define CONNECT_B3_ACTIVE_RESP_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define CONNECT_B3_REQ_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define CONNECT_B3_REQ_NCPI(x) ((x)->NCPI)
|
|
/* Network Control Protocol Information */
|
|
#define CONNECT_B3_CONF_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define CONNECT_B3_CONF_INFO(x) ((x)->Info)
|
|
/* 0: connect initiated */
|
|
/* 0x0001: NCPI not supported by current protocol, NCPI ignored */
|
|
/* 0x2001: message not supported in current state */
|
|
/* 0x2002: illegal PLCI */
|
|
/* 0x2004: out of NCCI */
|
|
/* 0x3008: NCPI not supported */
|
|
#define CONNECT_B3_IND_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define CONNECT_B3_IND_NCPI(x) ((x)->NCPI)
|
|
/* Network Control Protocol Information */
|
|
#define CONNECT_B3_RESP_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define CONNECT_B3_RESP_REJECT(x) ((x)->Reject)
|
|
/* 0: accept call */
|
|
/* 2: reject call, normal call clearing */
|
|
#define CONNECT_B3_RESP_NCPI(x) ((x)->NCPI)
|
|
/* Network Control Protocol Information */
|
|
#define CONNECT_B3_T90_ACTIVE_IND_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define CONNECT_B3_T90_ACTIVE_IND_NCPI(x) ((x)->NCPI)
|
|
/* Network Control Protocol Information */
|
|
#define CONNECT_B3_T90_ACTIVE_RESP_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define DATA_B3_REQ_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define DATA_B3_REQ_DATA(x) ((x)->Data)
|
|
/* Pointer to the data to be sent */
|
|
#define DATA_B3_REQ_DATALENGTH(x) ((x)->DataLength)
|
|
/* Size of data area to be sent */
|
|
#define DATA_B3_REQ_DATAHANDLE(x) ((x)->DataHandle)
|
|
/* Referenced in DATA_B3_CONF */
|
|
#define DATA_B3_REQ_FLAGS(x) ((x)->Flags)
|
|
/* [0]: qualifier bit */
|
|
/* [1]: more data bit */
|
|
/* [2]: delivery confirmation bit */
|
|
/* [3]: expedited data */
|
|
/* [4] to [15]: reserved */
|
|
#define DATA_B3_CONF_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define DATA_B3_CONF_DATAHANDLE(x) ((x)->DataHandle)
|
|
/* Identifies the data area of corresponding DATA_B3_REQ */
|
|
#define DATA_B3_CONF_INFO(x) ((x)->Info)
|
|
/* 0: data transmission initiated */
|
|
/* 0x0002: flags not supported by current protocol, flags ignored */
|
|
/* 0x2001: message not supported in current state */
|
|
/* 0x2002: illegal NCCI */
|
|
/* 0x2007: illegal message parameter coding */
|
|
/* 0x300A: flags not supported (reserved bits) */
|
|
/* 0x300C: data length not supported by current protocol */
|
|
#define DATA_B3_IND_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define DATA_B3_IND_DATA(x) ((x)->Data)
|
|
/* Pointer to data received */
|
|
#define DATA_B3_IND_DATALENGTH(x) ((x)->DataLength)
|
|
/* Size of data area received */
|
|
#define DATA_B3_IND_DATAHANDLE(x) ((x)->DataHandle)
|
|
/* handle to data area, referenced in DATA_B3_RESP */
|
|
#define DATA_B3_IND_FLAGS(x) ((x)->Flags)
|
|
/* 0: qualifier bit */
|
|
/* 1: more-data bit */
|
|
/* 2: delivery confirmation bit */
|
|
/* 3: expedited data */
|
|
/* 4 to 14: reserved */
|
|
/* [15]: framing error bit, data may be invalid (only with corresponding B2 protocol) */
|
|
#define DATA_B3_RESP_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define DATA_B3_RESP_DATAHANDLE(x) ((x)->DataHandle)
|
|
/* Data area reference in corresponding DATA_B3_IND */
|
|
#define DISCONNECT_B3_REQ_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define DISCONNECT_B3_REQ_NCPI(x) ((x)->NCPI)
|
|
/* Network Control Protocol Information */
|
|
#define DISCONNECT_B3_CONF_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define DISCONNECT_B3_CONF_INFO(x) ((x)->Info)
|
|
/* 0: disconnect initiated */
|
|
/* 0x0001: NCPI not supported by current protocol, NCPI ignored */
|
|
/* 0x2001: message not supported in current state */
|
|
/* 0x2002: illegal NCCI */
|
|
/* 0x2007: illegal message parameter coding */
|
|
/* 0x3008: NCPI not supported */
|
|
#define DISCONNECT_B3_IND_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define DISCONNECT_B3_IND_REASON_B3(x) ((x)->Reason_B3)
|
|
/* 0: clearing according to protocol */
|
|
/* 0x3301: protocol error layer 1 */
|
|
/* 0x3302: protocol error layer 2 */
|
|
/* 0x3303: protocol error layer 3 */
|
|
/* protocol dependent values are described in chapter 6 */
|
|
#define DISCONNECT_B3_IND_NCPI(x) ((x)->NCPI)
|
|
/* Network Control Protocol Information */
|
|
#define DISCONNECT_B3_RESP_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define DISCONNECT_REQ_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define DISCONNECT_REQ_ADDITIONALINFO(x) ((x)->AdditionalInfo)
|
|
/* Additional information elements */
|
|
#define DISCONNECT_REQ_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
|
|
#define DISCONNECT_REQ_KEYPADFACILITY(x) ((x)->Keypadfacility)
|
|
/* coded according to ETS 300 102-1 / Q.931 */
|
|
#define DISCONNECT_REQ_USERUSERDATA(x) ((x)->Useruserdata)
|
|
/* coded according to ETS 300 102-1 / Q.931 */
|
|
#define DISCONNECT_REQ_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
|
|
/* which is used to transfer additional parameters coded */
|
|
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
|
|
/* This field is used to transport one or more complete facility */
|
|
/* data information elements. */
|
|
#define DISCONNECT_CONF_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define DISCONNECT_CONF_INFO(x) ((x)->Info)
|
|
/* 0: disconnect initiated */
|
|
/* 0x2001: message not supported in current state */
|
|
/* 0x2002: illegal PLCI */
|
|
/* 0x2007: illegal message parameter coding */
|
|
#define DISCONNECT_IND_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define DISCONNECT_IND_REASON(x) ((x)->Reason)
|
|
/* 0: no cause available */
|
|
/* 0x3301: protocol error layer 1 */
|
|
/* 0x3302: protocol error layer 2 */
|
|
/* 0x3303: protocol error layer 3 */
|
|
/* 0x3304: another application got that call */
|
|
/* 0x34xx: disconnect cause from the network according to Q.931/ETS 300 102-1. In the field 'xx' the cause value received within a cause information element (octet 4) from the network is indicated. */
|
|
#define DISCONNECT_RESP_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define FACILITY_REQ_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define FACILITY_REQ_PLCI(x) ((x)->adr.adrPLCI)
|
|
#define FACILITY_REQ_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Depending on the facility selector */
|
|
#define FACILITY_REQ_FACILITYSELECTOR(x) ((x)->FacilitySelector)
|
|
/* 0: Handset Support */
|
|
/* 1: DTMF */
|
|
/* 2 to n: reserved */
|
|
#define FACILITY_REQ_FACILITYREQUESTPARAMETER(x) ((x)->FacilityRequestParameter)
|
|
/* Facility depending parameters */
|
|
#define FACILITY_CONF_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define FACILITY_CONF_PLCI(x) ((x)->adr.adrPLCI)
|
|
#define FACILITY_CONF_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Depending on the facility selector */
|
|
#define FACILITY_CONF_INFO(x) ((x)->Info)
|
|
/* 0: request accepted */
|
|
/* 0x2001: message not supported in current state */
|
|
/* 0x2002: incorrect Controller/PLCI/NCCI */
|
|
/* 0x2007: illegal message parameter coding */
|
|
/* 0x300B: facility not supported */
|
|
#define FACILITY_CONF_FACILITYSELECTOR(x) ((x)->FacilitySelector)
|
|
/* 0: Handset Support */
|
|
/* 1: DTMF */
|
|
/* 2 to n: reserved */
|
|
#define FACILITY_CONF_FACILITYCONFIRMATIONPARAMETER(x) ((x)->FacilityConfirmationParameter)
|
|
/* Facility-depending parameters */
|
|
#define FACILITY_IND_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define FACILITY_IND_PLCI(x) ((x)->adr.adrPLCI)
|
|
#define FACILITY_IND_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Depending on the facility selector */
|
|
#define FACILITY_IND_FACILITYSELECTOR(x) ((x)->FacilitySelector)
|
|
/* 0: Handset Support */
|
|
/* 1: DTMF */
|
|
/* 2 to n: reserved */
|
|
#define FACILITY_IND_FACILITYINDICATIONPARAMETER(x) ((x)->FacilityIndicationParameter)
|
|
/* Facility-depending parameters */
|
|
#define FACILITY_RESP_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define FACILITY_RESP_PLCI(x) ((x)->adr.adrPLCI)
|
|
#define FACILITY_RESP_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Depending on the facility selector */
|
|
#define FACILITY_RESP_FACILITYSELECTOR(x) ((x)->FacilitySelector)
|
|
/* 0: Handset Support */
|
|
/* 1: DTMF */
|
|
/* 2 to n: reserved */
|
|
/* Facility response parameters */
|
|
/* struct */
|
|
/* Facility-depending parameters */
|
|
#define INFO_REQ_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define INFO_REQ_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* See note */
|
|
#define INFO_REQ_CALLEDPARTYNUMBER(x) ((x)->CalledPartyNumber)
|
|
/* Called party number */
|
|
#define INFO_REQ_ADDITIONALINFO(x) ((x)->AdditionalInfo)
|
|
/* Additional information elements */
|
|
#define INFO_REQ_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
|
|
#define INFO_REQ_KEYPADFACILITY(x) ((x)->Keypadfacility)
|
|
/* coded according to ETS 300 102-1 / Q.931 */
|
|
#define INFO_REQ_USERUSERDATA(x) ((x)->Useruserdata)
|
|
/* coded according to ETS 300 102-1 / Q.931 */
|
|
#define INFO_REQ_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
|
|
/* which is used to transfer additional parameters coded */
|
|
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
|
|
/* This field is used to transport one or more complete facility */
|
|
/* data information elements. */
|
|
#define INFO_CONF_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define INFO_CONF_INFO(x) ((x)->Info)
|
|
/* 0: transmission of information initiated */
|
|
/* 0x2001: message not supported in current state */
|
|
/* 0x2002: illegal Controller/PLCI */
|
|
/* 0x2003: out of PLCI */
|
|
/* 0x2007: illegal message parameter coding */
|
|
#define INFO_IND_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define INFO_IND_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define INFO_IND_INFONUMBER(x) ((x)->InfoNumber)
|
|
/* Information element identifier */
|
|
#define INFO_IND_INFOELEMENT(x) ((x)->InfoElement)
|
|
/* Information element dependent structure */
|
|
#define INFO_RESP_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define INFO_RESP_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* As in INFO_IND */
|
|
#define LISTEN_REQ_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define LISTEN_REQ_INFOMASK(x) ((x)->InfoMask)
|
|
/* Bit field, coding as follows: */
|
|
/* 0: cause */
|
|
/* 1: date/Time */
|
|
/* 2: display */
|
|
/* 3: user-user information */
|
|
/* 4: call progression */
|
|
/* 5: facility */
|
|
/* 6: charging */
|
|
/* 7 to 31: reserved */
|
|
#define LISTEN_REQ_CIPMASK(x) ((x)->CIPmask)
|
|
/* Bit field, coding as follows: */
|
|
/* 0: any match */
|
|
/* 1: speech */
|
|
/* 2: unrestricted digital information */
|
|
/* 3: restricted digital information */
|
|
/* 4: 3.1 kHz audio */
|
|
/* 5: 7.0 kHz audio */
|
|
/* 6: video */
|
|
/* 7: packet mode */
|
|
/* 8: 56 kBit/s rate adaptation */
|
|
/* 9: unrestricted digital information with tones/announcements */
|
|
/* 10..15: reserved */
|
|
/* 16: telephony */
|
|
/* 17: fax group 2/3 */
|
|
/* 18: fax group 4 class 1 */
|
|
/* 19: Teletex service (basic and mixed), fax group 4 class 2 */
|
|
/* 20: Teletex service (basic and processable) */
|
|
/* 21: Teletex service (basic) */
|
|
/* 22: Videotex */
|
|
/* 23: Telex */
|
|
/* reserved for additional services */
|
|
/* 25: OSI applications according X.200 */
|
|
/* 26: 7 kHz Telephony */
|
|
/* 27: Video Telephony F.721, first connection */
|
|
/* 28: Video Telephony F.721, second connection */
|
|
/* 29 to 31: reserved */
|
|
#define LISTEN_REQ_CIPMASK2(x) ((x)->CIPmask2)
|
|
/* reserved for additional services */
|
|
#define LISTEN_REQ_CALLINGPARTYNUMBER(x) ((x)->CallingPartyNumber)
|
|
/* Calling party number */
|
|
#define LISTEN_REQ_CALLINGPARTYSUBADDRESS(x) ((x)->CallingPartySubaddress)
|
|
/* Calling party subaddress */
|
|
#define LISTEN_CONF_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define LISTEN_CONF_INFO(x) ((x)->Info)
|
|
/* 0: listen is active */
|
|
/* 0x2002: illegal controller */
|
|
/* 0x2005: out of LISTEN-Resources */
|
|
/* 0x2007: illegal message parameter coding */
|
|
#define MANUFACTURER_REQ_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define MANUFACTURER_REQ_MANUID(x) ((x)->ManuID)
|
|
/* Manufacturer specific ID (should be unique) */
|
|
/* Manufacturer specific */
|
|
#define MANUFACTURER_REQ_CLASS(x) ((x)->Class)
|
|
#define MANUFACTURER_REQ_FUNCTION(x) ((x)->Function)
|
|
#define MANUFACTURER_REQ_MANUDATA(x) ((x)->ManuData)
|
|
/* Manufacturer specific data */
|
|
#define MANUFACTURER_CONF_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define MANUFACTURER_CONF_MANUID(x) ((x)->ManuID)
|
|
/* Manufacturer specific ID (should be unique) */
|
|
/* Manufacturer specific */
|
|
#define MANUFACTURER_CONF_CLASS(x) ((x)->Class)
|
|
#define MANUFACTURER_CONF_FUNCTION(x) ((x)->Function)
|
|
#define MANUFACTURER_CONF_MANUDATA(x) ((x)->ManuData)
|
|
/* Manufacturer specific data */
|
|
#define MANUFACTURER_IND_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define MANUFACTURER_IND_MANUID(x) ((x)->ManuID)
|
|
/* Manufacturer specific ID (should be unique) */
|
|
/* Manufacturer specific */
|
|
#define MANUFACTURER_IND_CLASS(x) ((x)->Class)
|
|
#define MANUFACTURER_IND_FUNCTION(x) ((x)->Function)
|
|
#define MANUFACTURER_IND_MANUDATA(x) ((x)->ManuData)
|
|
/* Manufacturer specific data */
|
|
#define MANUFACTURER_RESP_CONTROLLER(x) ((x)->adr.adrController)
|
|
#define MANUFACTURER_RESP_MANUID(x) ((x)->ManuID)
|
|
/* Manufacturer specific ID (should be unique) */
|
|
/* Manufacturer specific */
|
|
#define MANUFACTURER_RESP_CLASS(x) ((x)->Class)
|
|
#define MANUFACTURER_RESP_FUNCTION(x) ((x)->Function)
|
|
#define MANUFACTURER_RESP_MANUDATA(x) ((x)->ManuData)
|
|
/* Manufacturer specific data */
|
|
#define RESET_B3_REQ_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define RESET_B3_REQ_NCPI(x) ((x)->NCPI)
|
|
/* Network Control Protocol Information */
|
|
#define RESET_B3_CONF_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define RESET_B3_CONF_INFO(x) ((x)->Info)
|
|
/* 0: reset initiated */
|
|
/* 0x0001: NCPI not supported by current protocol, NCPI ignored */
|
|
/* 0x2001: message not supported in current state */
|
|
/* 0x2002: illegal NCCI */
|
|
/* 0x2007: illegal message parameter coding */
|
|
/* 0x3008: NCPI not supported */
|
|
/* 0x300D: reset procedure not supported by current protocol */
|
|
#define RESET_B3_IND_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define RESET_B3_IND_NCPI(x) ((x)->NCPI)
|
|
/* Network Control Protocol Information */
|
|
#define RESET_B3_RESP_NCCI(x) ((x)->adr.adrNCCI)
|
|
/* Network Control Connection Identifier */
|
|
#define SELECT_B_PROTOCOL_REQ_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define SELECT_B_PROTOCOL_REQ_BPROTOCOL(x) ((x)->BProtocol)
|
|
/* Protocol definition */
|
|
#define SELECT_B_PROTOCOL_REQ_B1PROTOCOL(x) ((x)->B1protocol)
|
|
/* Physical layer and framing */
|
|
#define SELECT_B_PROTOCOL_REQ_B2PROTOCOL(x) ((x)->B2protocol)
|
|
/* Data link layer */
|
|
#define SELECT_B_PROTOCOL_REQ_B3PROTOCOL(x) ((x)->B3protocol)
|
|
/* Network layer */
|
|
#define SELECT_B_PROTOCOL_REQ_B1CONFIGURATION(x) ((x)->B1configuration)
|
|
/* Physical layer and framing parameter */
|
|
#define SELECT_B_PROTOCOL_REQ_B2CONFIGURATION(x) ((x)->B2configuration)
|
|
/* Data link layer parameter */
|
|
#define SELECT_B_PROTOCOL_REQ_B3CONFIGURATION(x) ((x)->B3configuration)
|
|
/* Network layer parameter */
|
|
#define SELECT_B_PROTOCOL_CONF_PLCI(x) ((x)->adr.adrPLCI)
|
|
/* Physical Link Connection Identifier */
|
|
#define SELECT_B_PROTOCOL_CONF_INFO(x) ((x)->Info)
|
|
/* 0: protocol switch successful */
|
|
/* 0x2001: message not supported in current state */
|
|
/* 0x2002: illegal PLCI */
|
|
/* 0x2007: illegal message parameter coding */
|
|
/* 0x3001: B1 protocol not supported */
|
|
/* 0x3002: B2 protocol not supported */
|
|
/* 0x3003: B3 protocol not supported */
|
|
/* 0x3004: B1 protocol parameter not supported */
|
|
/* 0x3005: B2 protocol parameter not supported */
|
|
/* 0x3006: B3 protocol parameter not supported */
|
|
/* 0x3007: B protocol combination not supported */
|
|
|
|
/*----- tests for specific commands -----*/
|
|
|
|
#define IS_CONNECT_IND(m) ((m)->Command==0x02 && (m)->Subcommand==0x82)
|
|
#define IS_CONNECT_ACTIVE_IND(m) ((m)->Command==0x03 && (m)->Subcommand==0x82)
|
|
#define IS_CONNECT_B3_ACTIVE_IND(m) ((m)->Command==0x83 && (m)->Subcommand==0x82)
|
|
#define IS_CONNECT_B3_IND(m) ((m)->Command==0x82 && (m)->Subcommand==0x82)
|
|
#define IS_CONNECT_B3_T90_ACTIVE_IND(m) ((m)->Command==0x88 && (m)->Subcommand==0x82)
|
|
#define IS_DATA_B3_IND(m) ((m)->Command==0x86 && (m)->Subcommand==0x82)
|
|
#define IS_DISCONNECT_B3_IND(m) ((m)->Command==0x84 && (m)->Subcommand==0x82)
|
|
#define IS_DISCONNECT_IND(m) ((m)->Command==0x04 && (m)->Subcommand==0x82)
|
|
#define IS_FACILITY_IND(m) ((m)->Command==0x80 && (m)->Subcommand==0x82)
|
|
#define IS_INFO_IND(m) ((m)->Command==0x08 && (m)->Subcommand==0x82)
|
|
#define IS_MANUFACTURER_IND(m) ((m)->Command==0xff && (m)->Subcommand==0x82)
|
|
#define IS_RESET_B3_IND(m) ((m)->Command==0x87 && (m)->Subcommand==0x82)
|
|
#define IS_ALERT_CONF(m) ((m)->Command==0x01 && (m)->Subcommand==0x81)
|
|
#define IS_CONNECT_CONF(m) ((m)->Command==0x02 && (m)->Subcommand==0x81)
|
|
#define IS_CONNECT_B3_CONF(m) ((m)->Command==0x82 && (m)->Subcommand==0x81)
|
|
#define IS_DATA_B3_CONF(m) ((m)->Command==0x86 && (m)->Subcommand==0x81)
|
|
#define IS_DISCONNECT_B3_CONF(m) ((m)->Command==0x84 && (m)->Subcommand==0x81)
|
|
#define IS_DISCONNECT_CONF(m) ((m)->Command==0x04 && (m)->Subcommand==0x81)
|
|
#define IS_FACILITY_CONF(m) ((m)->Command==0x80 && (m)->Subcommand==0x81)
|
|
#define IS_INFO_CONF(m) ((m)->Command==0x08 && (m)->Subcommand==0x81)
|
|
#define IS_LISTEN_CONF(m) ((m)->Command==0x05 && (m)->Subcommand==0x81)
|
|
#define IS_MANUFACTURER_CONF(m) ((m)->Command==0xff && (m)->Subcommand==0x81)
|
|
#define IS_RESET_B3_CONF(m) ((m)->Command==0x87 && (m)->Subcommand==0x81)
|
|
#define IS_SELECT_B_PROTOCOL_CONF(m) ((m)->Command==0x41 && (m)->Subcommand==0x81)
|
|
|
|
/*----- header functions that fill the _cmsg structure with default -----*/
|
|
/*----- values. Only nonstandard parameter need to be changed -----*/
|
|
|
|
#define ALERT_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x01,0x80,Messagenumber,adr)
|
|
#define CONNECT_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x02,0x80,Messagenumber,adr)
|
|
#define CONNECT_B3_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x82,0x80,Messagenumber,adr)
|
|
#define DATA_B3_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x86,0x80,Messagenumber,adr)
|
|
#define DISCONNECT_B3_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x84,0x80,Messagenumber,adr)
|
|
#define DISCONNECT_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x04,0x80,Messagenumber,adr)
|
|
#define FACILITY_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x80,0x80,Messagenumber,adr)
|
|
#define INFO_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x08,0x80,Messagenumber,adr)
|
|
#define LISTEN_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x05,0x80,Messagenumber,adr)
|
|
#define MANUFACTURER_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0xff,0x80,Messagenumber,adr)
|
|
#define RESET_B3_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x87,0x80,Messagenumber,adr)
|
|
#define SELECT_B_PROTOCOL_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x41,0x80,Messagenumber,adr)
|
|
#define CONNECT_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x02,0x83,Messagenumber,adr)
|
|
#define CONNECT_ACTIVE_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x03,0x83,Messagenumber,adr)
|
|
#define CONNECT_B3_ACTIVE_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x83,0x83,Messagenumber,adr)
|
|
#define CONNECT_B3_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x82,0x83,Messagenumber,adr)
|
|
#define CONNECT_B3_T90_ACTIVE_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x88,0x83,Messagenumber,adr)
|
|
#define DATA_B3_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x86,0x83,Messagenumber,adr)
|
|
#define DISCONNECT_B3_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x84,0x83,Messagenumber,adr)
|
|
#define DISCONNECT_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x04,0x83,Messagenumber,adr)
|
|
#define FACILITY_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x80,0x83,Messagenumber,adr)
|
|
#define INFO_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x08,0x83,Messagenumber,adr)
|
|
#define MANUFACTURER_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0xff,0x83,Messagenumber,adr)
|
|
#define RESET_B3_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
|
|
CAPI_CMSG_HEADER(cmsg,ApplId,0x87,0x83,Messagenumber,adr)
|
|
|
|
/*
|
|
* CAPI-functions that correspond to the CAPI messages specified in the
|
|
* CAPI 2.0 specification. All possible parameter have to be specified.
|
|
* The CAPI message is sent immediately when calling these functions,
|
|
* return values are the same as in capi_put_message()
|
|
*/
|
|
|
|
unsigned ALERT_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cstruct BChannelinformation
|
|
,_cstruct Keypadfacility
|
|
,_cstruct Useruserdata
|
|
,_cstruct Facilitydataarray);
|
|
unsigned CONNECT_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cword CIPValue
|
|
,_cstruct CalledPartyNumber
|
|
,_cstruct CallingPartyNumber
|
|
,_cstruct CalledPartySubaddress
|
|
,_cstruct CallingPartySubaddress
|
|
,_cword B1protocol
|
|
,_cword B2protocol
|
|
,_cword B3protocol
|
|
,_cstruct B1configuration
|
|
,_cstruct B2configuration
|
|
,_cstruct B3configuration
|
|
,_cstruct BC
|
|
,_cstruct LLC
|
|
,_cstruct HLC
|
|
,_cstruct BChannelinformation
|
|
,_cstruct Keypadfacility
|
|
,_cstruct Useruserdata
|
|
,_cstruct Facilitydataarray);
|
|
unsigned CONNECT_B3_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cstruct NCPI);
|
|
unsigned DATA_B3_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cdword Data
|
|
,_cword DataLength
|
|
,_cword DataHandle
|
|
,_cword Flags);
|
|
unsigned DISCONNECT_B3_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cstruct NCPI);
|
|
unsigned DISCONNECT_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cstruct BChannelinformation
|
|
,_cstruct Keypadfacility
|
|
,_cstruct Useruserdata
|
|
,_cstruct Facilitydataarray);
|
|
unsigned FACILITY_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cword FacilitySelector
|
|
,_cstruct FacilityRequestParameter);
|
|
unsigned INFO_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cstruct CalledPartyNumber
|
|
,_cstruct BChannelinformation
|
|
,_cstruct Keypadfacility
|
|
,_cstruct Useruserdata
|
|
,_cstruct Facilitydataarray);
|
|
unsigned LISTEN_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cdword InfoMask
|
|
,_cdword CIPmask
|
|
,_cdword CIPmask2
|
|
,_cstruct CallingPartyNumber
|
|
,_cstruct CallingPartySubaddress);
|
|
unsigned MANUFACTURER_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cdword ManuID
|
|
,_cdword Class
|
|
,_cdword Function
|
|
,_cstruct ManuData);
|
|
unsigned RESET_B3_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cstruct NCPI);
|
|
unsigned SELECT_B_PROTOCOL_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cword B1protocol
|
|
,_cword B2protocol
|
|
,_cword B3protocol
|
|
,_cstruct B1configuration
|
|
,_cstruct B2configuration
|
|
,_cstruct B3configuration);
|
|
unsigned CONNECT_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cword Reject
|
|
,_cword B1protocol
|
|
,_cword B2protocol
|
|
,_cword B3protocol
|
|
,_cstruct B1configuration
|
|
,_cstruct B2configuration
|
|
,_cstruct B3configuration
|
|
,_cstruct ConnectedNumber
|
|
,_cstruct ConnectedSubaddress
|
|
,_cstruct LLC
|
|
,_cstruct BChannelinformation
|
|
,_cstruct Keypadfacility
|
|
,_cstruct Useruserdata
|
|
,_cstruct Facilitydataarray);
|
|
unsigned CONNECT_ACTIVE_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr);
|
|
unsigned CONNECT_B3_ACTIVE_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr);
|
|
unsigned CONNECT_B3_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cword Reject
|
|
,_cstruct NCPI);
|
|
unsigned CONNECT_B3_T90_ACTIVE_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr);
|
|
unsigned DATA_B3_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cword DataHandle);
|
|
unsigned DISCONNECT_B3_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr);
|
|
unsigned DISCONNECT_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr);
|
|
unsigned FACILITY_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cword FacilitySelector
|
|
,_cstruct FacilityResponseParameters);
|
|
unsigned INFO_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr);
|
|
unsigned MANUFACTURER_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr
|
|
,_cdword ManuID
|
|
,_cdword Class
|
|
,_cdword Function
|
|
,_cstruct ManuData);
|
|
unsigned RESET_B3_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
|
|
,_cdword adr);
|
|
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __CAPI20_H */
|