To: isdn4linux@hub-wue.franken.de
Xref: oops de.alt.comm.isdn4linux:856
From: Rainer Birkenmaier <rainer@kirk.mop.uni-ulm.de>
Newsgroups: de.alt.comm.isdn4linux
Subject: Re: MPPP
Date: 17 Jan 1997 01:11:27 GMT
Organization: Die Wischmop-WG
Lines: 90
Message-Id: <5bmjjv$nt@kirk.mop.uni-ulm.de>
References: <199701120958.LAA03553@santra.hut.fi>
Reply-To: rbirkenm@hydra.informatik.uni-ulm.de
Nntp-Posting-Host: freewayport27.extern.uni-ulm.de
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 8bit
Sender: owner-isdn4linux@hub-wue.franken.de
Precedence: bulk
Status:   

Hi !

Also bei mir funktioniert das "isdnctrl addlink ippp0" mit
folgendem Skript prima:

---------- schnipp ----------

#!/bin/sh
#
# don't forget to edit the files
#     /etc/ppp/pap-secrets or 
#     /etc/ppp/chap-secrets 
#

PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin

LOCAL_NUMBER="123345"
REMOTE_NUMBER="9876543"		
LOCAL_IP="134.60.7.70" 
REMOTE_IP="134.60.7.102"
DEVICE="ippp0"
TELES_ID="line0"
USER="userName"

# additional for channel bundling:
DEVICE1="ippp128"

VERSION=`cat /proc/version | awk '{ print $3 }' `

# when setting the environment variable MODPATH you
# can omit the full path.
SYSPATH="/sbin/"

telesctrl $TELES_ID 1 4      # enable verbose '4' mode

isdnctrl addif  $DEVICE			# Create new interface 'DEVICE'
isdnctrl addphone $DEVICE out $REMOTE_NUMBER	# Set outgoung phone-number
isdnctrl eaz $DEVICE $LOCAL_NUMBER	# Set local EAZ .. 
isdnctrl l2_prot $DEVICE hdlc		# for sync PPP: set Level 2 to HDLC
isdnctrl l3_prot $DEVICE trans		# not really necessary, 'trans' is default
isdnctrl encap $DEVICE syncppp		# encap the IP Pakets in PPP frames
isdnctrl huptimeout $DEVICE 300		# Hangup-Timeout is 300 sec. -> 5 min
isdnctrl chargehup $DEVICE off		# Hangup before next Charge-Info
isdnctrl secure $DEVICE on		# Accept only configured phone-number

# additional for channel bundling:
isdnctrl addslave $DEVICE $DEVICE1	# Create new slave interface 'DEVICE1'
isdnctrl addphone $DEVICE1 out $REMOTE_NUMBER	# Set outgoung phone-number
isdnctrl eaz $DEVICE1 $LOCAL_NUMBER	# Set local EAZ ..
isdnctrl l2_prot $DEVICE1 hdlc		# for sync PPP: set Level 2 to HDLC
isdnctrl l3_prot $DEVICE1 trans		# not really necessary, 'trans' is default
isdnctrl encap $DEVICE1 syncppp		# encap the IP Pakets in PPP frames
isdnctrl huptimeout $DEVICE1 300	# Hangup-Timeout is 300 sec. -> 5 min
isdnctrl chargehup $DEVICE1 off		# Hangup before next Charge-Info
isdnctrl secure $DEVICE1 on		# Accept only configured phone-number


ifconfig $DEVICE -arp $LOCAL_IP pointopoint $REMOTE_IP metric 1 
route add default $DEVICE
route add default gw 134.60.7.98

ipppd user $USER  \
        /dev/ippp0 /dev/ippp1 /dev/ippp2

---------- schnapp ----------

Ich hab dabei noch folgendes in /etc/ppp/options stehen:

---------- schnipp ----------
debug
+mp
noipdefault
remotename highway
mru 1524
ipcp-accept-local ipcp-accept-remote
lock
defaultroute
-bsdcomp
-pc
-ac
---------- schnapp ----------

Ich hoffe ich konnte helfen!
Bye ... Rainer!
PS: ich hab hier uebrigens 'ne Teles/S0 16.3
-- 
<< e-mail: rbirkenm@hydra.informatik.uni-ulm.de >>

---------------------------------------------------
To remove yourself from this mailing list send
email to majordomo@hub-wue.franken.de containing
"unsubscribe isdn4linux <your_email_address>" in
the message body [-vg]