retronetworking
/
isdn4k-utils
13
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

fix some spelling mistakes in avmcapictrl man page 

http://bugs.debian.org/309557
This commit is contained in:
Peter Marschall 2012-03-29 21:51:07 +02:00 committed by Rolf Leggewie
parent b9903cf51c
commit f2ff0ee705
1 changed files with 15 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
avmb1/avmcapictrl.man.in
View File

@ -22,20 +22,20 @@ avmcapictrl trace [contrnr] [off|short|on|full|shortnodata|nodata]
avmcapictrl addcard <driver> <portbase> <irq> [ <membase> [ <cardnr> ] ]
.SH DESCRIPTION
.I avmcapictrl
is used to register active AVM ISA cards kernelcapi system and
therewith to the isdn system. You need it also to upload the
firmware to any active AVM card. If an error occure please also
check the kernel error messages by using the command dmesg(8).
is used to register active AVM ISA cards to the kernelcapi system and
therewith to the ISDN system. You need it also to upload the
firmware to any active AVM card. If an error occurs please also
check the kernel error messages using the command dmesg(8).
.LP
.SH COMMANDS
.TP 5
.B add <portbase> <irq> <type>
is used to add a ISA card to the kernel-capi2.0 system.
is used to add an ISA card to the kernel-capi2.0 system.
The
.I portbase
can have the values 0x150, 0x250, 0x300 and 0x340 for
the B1 ISA cards, look at the jumper on the card.
For a T1-ISA (HEMA) card you can select an wide range
For a T1-ISA (HEMA) card you can select a wide range
of ports.
.br
.I irq
@ -52,10 +52,10 @@ can be B1 or T1.
is used to load the firmware to a card
.I bootcode
is a t4-file. The actual versions of the t4-files for the different
d-channel protocols can be found at
D channel protocols can be found at
ftp://ftp.avm.de/cardware/b1/linux/firmware.
.br
You need different t4-files for different d channel protocols:
You need different t4-files for different D channel protocols:
b1-1tr6.t4 for 1TR6, b1.t4 for DSS1 and
.br
b1-usa.t4 for 5ESS and NI1 (DSS1 is also supported).
@ -78,15 +78,15 @@ is for the american protocols 5ESS and NI1.
.TP 5
.B reset [contrnr]
is used to reset a card if loading has failed.
This function only make sence if card is not successfully loaded.
This function only makes sense if a card is not successfully loaded.
.br
.I contrnr
is the number of the controller (card) starting from 1.
.LP
.TP 5
.B remove [contrnr]
is used to remove a card previous added. You can also remove
automatic added cards (for example a B1-PCI card).
is used to remove a card previously added. You can also remove
cards added automatically (for example a B1-PCI card).
.br
.I contrnr
is the number of the controller (card) starting from 1.
@ -100,16 +100,16 @@ as kernel messages, see dmesg(8).
is the number of the controller (card) starting from 1.
.br
.I off
switch traceing off
switch off tracing
.br
.I short
switch one line per CAPI2.0 message tracing on
switch on "one line per CAPI2.0 message" tracing
.br
.I on | full
switch on full decode tracing
switch on "full decode" tracing
.br
.I shortnodata
switch on line per CAPI2.0 message tracing on, but exclude
switch on "one line per CAPI2.0 message" tracing, but exclude
DATA_B3_IND and DATA_B3_REQ messages.
.br
.I on | full