From a4133bb51d6b5db810fc1e47cb9b46f66d24b80c Mon Sep 17 00:00:00 2001 From: fritz Date: Fri, 12 Jun 1998 11:11:42 +0000 Subject: [PATCH] First checkin, not complete, for Armin only. --- diehl/Makefile.in | 73 ++ diehl/aclocal.m4 | 41 + diehl/configure | 1809 ++++++++++++++++++++++++++++++++++++++++ diehl/configure.in | 73 ++ diehl/diehlctrl.c | 188 +++++ diehl/diehlctrl.man.in | 154 ++++ diehl/install-sh | 2 + 7 files changed, 2340 insertions(+) create mode 100644 diehl/Makefile.in create mode 100644 diehl/aclocal.m4 create mode 100755 diehl/configure create mode 100644 diehl/configure.in create mode 100644 diehl/diehlctrl.c create mode 100644 diehl/diehlctrl.man.in create mode 100755 diehl/install-sh diff --git a/diehl/Makefile.in b/diehl/Makefile.in new file mode 100644 index 00000000..fcc4922b --- /dev/null +++ b/diehl/Makefile.in @@ -0,0 +1,73 @@ +# $Id: Makefile.in,v 1.1 1998/06/12 11:11:42 fritz Exp $ +# +# Makefile for diehlctrl +# (C) 1997 Fritz Elfert +# +# +SHELL = /bin/sh +CFLAGS = -Wall -O2 +INCLUDES = -I. -I@CONFIG_KERNELDIR@/include -I@CONFIG_KERNELDIR@/drivers/isdn/diehl +DEFS = +LDFLAGS = -L../lib @LIBS@ +PROGRAM = diehlctrl +MODULES = diehlctrl.o +MANPAGE = diehlctrl.8 +INSTALL = @INSTALL@ +SBINDIR = @CONFIG_SBINDIR@ +DATADIR = @CONFIG_DATADIR@ +MANDIR = @CONFIG_MANDIR@ +MAN8DIR = $(MANDIR)/man8 +INSTALL_PROGRAM = $(INSTALL) -o 0 -g 0 -m 0750 +INSTALL_DATA = $(INSTALL) -o 0 -g 0 -m 0644 +INSTALL_MAN = $(INSTALL) -o 0 -g 0 -m 0644 +CC = @CC@ +COPTS = + +ifeq ("@CONFIG_DIEHLCTRL_DEBUG@","y") + COPTS += -D__DEBUGVAR__ +endif + +.SUFFIXES: +.SUFFIXES: .c .o + +%.o: %.c Makefile + $(CC) $(CFLAGS) $(INCLUDES) $(DEFS) $(COPTS) -c -o $@ $< + +all: $(PROGRAM) + +config: + @./configure + +Makefile: Makefile.in config.status + ./config.status + +config.status: configure + ./config.status --recheck + +$(PROGRAM): $(MODULES) + $(CC) $(CFLAGS) $(INCLUDES) $(DEFS) $? $(LDFLAGS) -o $@ + +install-data: + mkdir -p $(DATADIR) + #$(INSTALL_DATA) firmware/loadpg.bin $(DATADIR)/loadpg.bin + #$(INSTALL_DATA) firmware/pc_eu_ca.bin $(DATADIR)/pc_eu_ca.bin + #$(INSTALL_DATA) firmware/pc_1t_ca.bin $(DATADIR)/pc_1t_ca.bin + +install-man: $(PROGRAM).man + mkdir -p $(MAN8DIR) + $(INSTALL_MAN) $< $(MAN8DIR)/$(MANPAGE) + +install: $(PROGRAM) install-man install-data + $(INSTALL_PROGRAM) $(PROGRAM) $(SBINDIR)/$(PROGRAM) + +install-strip: $(PROGRAM) + $(INSTALL_PROGRAM) -s $(PROGRAM) $(SBINDIR)/$(PROGRAM) + +uninstall: + rm -f $(SBINDIR)/$(PROGRAM) $(MAN8DIR)/$(MANPAGE) + +clean: + rm -f *.o *~ $(PROGRAM) + +distclean: clean + rm -f config.status config.cache config.log Makefile diehlctrl.man diff --git a/diehl/aclocal.m4 b/diehl/aclocal.m4 new file mode 100644 index 00000000..eeca1b77 --- /dev/null +++ b/diehl/aclocal.m4 @@ -0,0 +1,41 @@ +dnl +dnl Try finding linux sourcetree +dnl + +AC_DEFUN(AC_FIND_KERNEL, [ + OLD_CPPFLAGS="$CPPFLAGS" + lxdir="no" + eval tst_kerneldir=$CONFIG_KERNELDIR + + AC_ARG_WITH(kernel, + [ --with-kernel=DIR Set kernel source directory [/usr/src/linux]], + DOTEST="y"; tst_kerneldir="${withval}") + + if test "$DOTEST" = "y" || test "$CONFIG_KERNELDIR" != "" ; then + AC_MSG_CHECKING([for linux kernel source in ${tst_kerneldir}]) + CPPFLAGS="-nostdinc -I${tst_kerneldir}/drivers/isdn" + AC_TRY_CPP([#include ], lxdir=${tst_kerneldir}, + AC_MSG_RESULT("no")) + fi + if test "$lxdir" = "no" ; then + AC_MSG_CHECKING([for linux kernel source in /usr/src/linux]) + CPPFLAGS="-nostdinc -I/usr/src/linux/drivers/isdn" + AC_TRY_CPP([#include ], lxdir=/usr/src/linux) + fi + if test "$lxdir" = "no" ; then + AC_MSG_RESULT("$lxdir") + AC_MSG_CHECKING([for linux kernel source in /usr/local/src/linux]) + CPPFLAGS="-nostdinc -I/usr/local/src/linux/drivers/isdn" + AC_TRY_CPP([#include ], lxdir=/usr/local/src/linux) + fi + if test "$lxdir" != "no" ; then + AC_MSG_RESULT("yes") + else + lxdir="" + AC_MSG_ERROR("Kernel source not found. You MUST specify a correct path to the linux source in the configuration.") + fi + CONFIG_KERNELDIR="$lxdir" + CPPFLAGS="$OLD_CPPFLAGS" + AC_DEFINE_UNQUOTED(CONFIG_KERNELDIR,"$lxdir") + AC_SUBST(CONFIG_KERNELDIR) +]) diff --git a/diehl/configure b/diehl/configure new file mode 100755 index 00000000..6454a039 --- /dev/null +++ b/diehl/configure @@ -0,0 +1,1809 @@ +#! /bin/sh + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.12 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: +ac_default_prefix="/usr" +ac_help="$ac_help + --with-kernel=DIR Set kernel source directory [/usr/src/linux]" +ac_help="$ac_help + --with-firmware=DIR Set dir where firmware istalled. [/usr/lib/isdn]" +ac_help="$ac_help + --with-sbin=DIR Set dir where binary is istalled. [/sbin]" +ac_help="$ac_help + --with-man=DIR Set manpage dir. [/usr/man]" +ac_help="$ac_help + --enable-dump Enable dump feature for debugging [no]" + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= +# Maximum number of lines to put in a shell here document. +ac_max_here_lines=12 + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.12" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set these to C if already set. These must not be set unconditionally +# because not all systems understand e.g. LANG=C (notably SCO). +# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +# Non-C LC_CTYPE values break the ctype check. +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=diehlctrl.c + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + + +I4LVERSION=${I4LVERSION:-"?.?"} +CONFIG_DATADIR=${CONFIG_DATADIR:-"/usr/lib/isdn"} +CONFIG_SBINDIR=${CONFIG_SBINDIR:-"/sbin"} +CONFIG_MANDIR=${CONFIG_MANDIR:-"/usr/man"} +CONFIG_DIEHLCTRL_DEBUG=${CONFIG_DIEHLCTRL_DEBUG:-"n"} +CONFIG_KERNELDIR=`eval echo ${CONFIG_KERNELDIR:-"/usr/src/linux"}` +MANDATE=`grep CHECKIN diehlctrl.man.in | awk '{print $4}'` + +ac_aux_dir= +for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:573: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + for ac_prog in ginstall installbsd scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + # OSF/1 installbsd also uses dspmsg, but is usable. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:625: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:654: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + ac_prog_rejected=no + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:702: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then + ac_cv_prog_cc_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cc_cross=no + else + ac_cv_prog_cc_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:736: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:741: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:765: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + elif test $ac_cv_prog_cc_g = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-O2" + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi + + + +echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 +echo "configure:795: checking how to run the C preprocessor" >&5 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then +if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # This must be in double quotes, not single quotes, because CPP may get + # substituted into the Makefile and "${CC-cc}" will confuse make. + CPP="${CC-cc} -E" + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:816: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -E -traditional-cpp" + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP=/lib/cpp +fi +rm -f conftest* +fi +rm -f conftest* + ac_cv_prog_CPP="$CPP" +fi + CPP="$ac_cv_prog_CPP" +else + ac_cv_prog_CPP="$CPP" +fi +echo "$ac_t""$CPP" 1>&6 + +echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 +echo "configure:856: checking for ANSI C header files" >&5 +if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#include +#include +#include +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:869: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + ac_cv_header_stdc=yes +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +cat > conftest.$ac_ext < +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "memchr" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +cat > conftest.$ac_ext < +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "free" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +if test "$cross_compiling" = yes; then + : +else + cat > conftest.$ac_ext < +#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int main () { int i; for (i = 0; i < 256; i++) +if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); +exit (0); } + +EOF +if { (eval echo configure:936: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_header_stdc=no +fi +rm -fr conftest* +fi + +fi +fi + +echo "$ac_t""$ac_cv_header_stdc" 1>&6 +if test $ac_cv_header_stdc = yes; then + cat >> confdefs.h <<\EOF +#define STDC_HEADERS 1 +EOF + +fi + +for ac_hdr in fcntl.h sys/ioctl.h unistd.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:963: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:973: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + + + + OLD_CPPFLAGS="$CPPFLAGS" + lxdir="no" + eval tst_kerneldir=$CONFIG_KERNELDIR + + # Check whether --with-kernel or --without-kernel was given. +if test "${with_kernel+set}" = set; then + withval="$with_kernel" + DOTEST="y"; tst_kerneldir="${withval}" +fi + + + if test "$DOTEST" = "y" || test "$CONFIG_KERNELDIR" != "" ; then + echo $ac_n "checking for linux kernel source in ${tst_kerneldir}""... $ac_c" 1>&6 +echo "configure:1014: checking for linux kernel source in ${tst_kerneldir}" >&5 + CPPFLAGS="-nostdinc -I${tst_kerneldir}/drivers/isdn" + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1022: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + lxdir=${tst_kerneldir} +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + echo "$ac_t"""no"" 1>&6 +fi +rm -f conftest* + fi + if test "$lxdir" = "no" ; then + echo $ac_n "checking for linux kernel source in /usr/src/linux""... $ac_c" 1>&6 +echo "configure:1038: checking for linux kernel source in /usr/src/linux" >&5 + CPPFLAGS="-nostdinc -I/usr/src/linux/drivers/isdn" + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1046: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + lxdir=/usr/src/linux +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* + fi + if test "$lxdir" = "no" ; then + echo "$ac_t"""$lxdir"" 1>&6 + echo $ac_n "checking for linux kernel source in /usr/local/src/linux""... $ac_c" 1>&6 +echo "configure:1061: checking for linux kernel source in /usr/local/src/linux" >&5 + CPPFLAGS="-nostdinc -I/usr/local/src/linux/drivers/isdn" + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1069: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + lxdir=/usr/local/src/linux +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* + fi + if test "$lxdir" != "no" ; then + echo "$ac_t"""yes"" 1>&6 + else + lxdir="" + { echo "configure: error: "Kernel source not found. You MUST specify a correct path to the linux source in the configuration."" 1>&2; exit 1; } + fi + CONFIG_KERNELDIR="$lxdir" + CPPFLAGS="$OLD_CPPFLAGS" + cat >> confdefs.h <&6 +echo "configure:1099: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1109: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +{ echo "configure: error: "$CONFIG_KERNELDIR/include/linux/isdn.h missing. Kernel installed?"" 1>&2; exit 1; } + +fi +done + +for ac_hdr in $CONFIG_KERNELDIR/drivers/isdn/diehl/diehl.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:1141: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1151: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +{ echo "configure: error: "$CONFIG_KERNELDIR/drivers/isdn/diehl/diehl.h missing. Kernel installed?"" 1>&2; exit 1; } + +fi +done + + + +if test $ac_cv_prog_gcc = yes; then + echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6 +echo "configure:1183: checking whether ${CC-cc} needs -traditional" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_pattern="Autoconf.*'x'" + cat > conftest.$ac_ext < +Autoconf TIOCGETP +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "$ac_pattern" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_prog_gcc_traditional=yes +else + rm -rf conftest* + ac_cv_prog_gcc_traditional=no +fi +rm -f conftest* + + + if test $ac_cv_prog_gcc_traditional = no; then + cat > conftest.$ac_ext < +Autoconf TCGETA +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "$ac_pattern" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_prog_gcc_traditional=yes +fi +rm -f conftest* + + fi +fi + +echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6 + if test $ac_cv_prog_gcc_traditional = yes; then + CC="$CC -traditional" + fi +fi + +for ac_hdr in unistd.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:1232: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1242: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + +for ac_func in getpagesize +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:1271: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:1299: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 +fi +done + +echo $ac_n "checking for working mmap""... $ac_c" 1>&6 +echo "configure:1324: checking for working mmap" >&5 +if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_mmap_fixed_mapped=no +else + cat > conftest.$ac_ext < +#include +#include + +/* This mess was copied from the GNU getpagesize.h. */ +#ifndef HAVE_GETPAGESIZE +# ifdef HAVE_UNISTD_H +# include +# endif + +/* Assume that all systems that can run configure have sys/param.h. */ +# ifndef HAVE_SYS_PARAM_H +# define HAVE_SYS_PARAM_H 1 +# endif + +# ifdef _SC_PAGESIZE +# define getpagesize() sysconf(_SC_PAGESIZE) +# else /* no _SC_PAGESIZE */ +# ifdef HAVE_SYS_PARAM_H +# include +# ifdef EXEC_PAGESIZE +# define getpagesize() EXEC_PAGESIZE +# else /* no EXEC_PAGESIZE */ +# ifdef NBPG +# define getpagesize() NBPG * CLSIZE +# ifndef CLSIZE +# define CLSIZE 1 +# endif /* no CLSIZE */ +# else /* no NBPG */ +# ifdef NBPC +# define getpagesize() NBPC +# else /* no NBPC */ +# ifdef PAGESIZE +# define getpagesize() PAGESIZE +# endif /* PAGESIZE */ +# endif /* no NBPC */ +# endif /* no NBPG */ +# endif /* no EXEC_PAGESIZE */ +# else /* no HAVE_SYS_PARAM_H */ +# define getpagesize() 8192 /* punt totally */ +# endif /* no HAVE_SYS_PARAM_H */ +# endif /* no _SC_PAGESIZE */ + +#endif /* no HAVE_GETPAGESIZE */ + +#ifdef __cplusplus +extern "C" { void *malloc(unsigned); } +#else +char *malloc(); +#endif + +int +main() +{ + char *data, *data2, *data3; + int i, pagesize; + int fd; + + pagesize = getpagesize(); + + /* + * First, make a file with some known garbage in it. + */ + data = malloc(pagesize); + if (!data) + exit(1); + for (i = 0; i < pagesize; ++i) + *(data + i) = rand(); + umask(0); + fd = creat("conftestmmap", 0600); + if (fd < 0) + exit(1); + if (write(fd, data, pagesize) != pagesize) + exit(1); + close(fd); + + /* + * Next, try to mmap the file at a fixed address which + * already has something else allocated at it. If we can, + * also make sure that we see the same garbage. + */ + fd = open("conftestmmap", O_RDWR); + if (fd < 0) + exit(1); + data2 = malloc(2 * pagesize); + if (!data2) + exit(1); + data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1); + if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_FIXED, fd, 0L)) + exit(1); + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data2 + i)) + exit(1); + + /* + * Finally, make sure that changes to the mapped area + * do not percolate back to the file as seen by read(). + * (This is a bug on some variants of i386 svr4.0.) + */ + for (i = 0; i < pagesize; ++i) + *(data2 + i) = *(data2 + i) + 1; + data3 = malloc(pagesize); + if (!data3) + exit(1); + if (read(fd, data3, pagesize) != pagesize) + exit(1); + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data3 + i)) + exit(1); + close(fd); + unlink("conftestmmap"); + exit(0); +} + +EOF +if { (eval echo configure:1472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +then + ac_cv_func_mmap_fixed_mapped=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_func_mmap_fixed_mapped=no +fi +rm -fr conftest* +fi + +fi + +echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6 +if test $ac_cv_func_mmap_fixed_mapped = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_MMAP 1 +EOF + +fi + + +# Check whether --with-firmware or --without-firmware was given. +if test "${with_firmware+set}" = set; then + withval="$with_firmware" + CONFIG_DATADIR="${withval}" + cat >> confdefs.h <<\EOF +#define CONFIG_DATADIR "${withval}" +EOF + +fi + + +# Check whether --with-sbin or --without-sbin was given. +if test "${with_sbin+set}" = set; then + withval="$with_sbin" + CONFIG_SBINDIR="${withval}" + cat >> confdefs.h <<\EOF +#define CONFIG_SBINDIR "${withval}" +EOF + +fi + + +# Check whether --with-man or --without-man was given. +if test "${with_man+set}" = set; then + withval="$with_man" + CONFIG_MANDIR="${withval}" + cat >> confdefs.h <<\EOF +#define CONFIG_MANDIR "${withval}" +EOF + +fi + + +# Check whether --enable-dump or --disable-dump was given. +if test "${enable_dump+set}" = set; then + enableval="$enable_dump" + CONFIG_DIEHLCTRL_DEBUG="y" + +fi + + + + + + + + + + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +cat > conftest.defs <<\EOF +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g +s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g +s%\[%\\&%g +s%\]%\\&%g +s%\$%$$%g +EOF +DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` +rm -f conftest.defs + + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS </dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.12" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir +ac_given_INSTALL="$INSTALL" + +trap 'rm -fr `echo "Makefile diehlctrl.man" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g +s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@CC@%$CC%g +s%@CPP@%$CPP%g +s%@CONFIG_KERNELDIR@%$CONFIG_KERNELDIR%g +s%@INSTALL@%$INSTALL%g +s%@MANDATE@%$MANDATE%g +s%@CONFIG_DIEHLCTRL_DEBUG@%$CONFIG_DIEHLCTRL_DEBUG%g +s%@CONFIG_DATADIR@%$CONFIG_DATADIR%g +s%@CONFIG_SBINDIR@%$CONFIG_SBINDIR%g +s%@CONFIG_MANDIR@%$CONFIG_MANDIR%g +s%@I4LVERSION@%$I4LVERSION%g + +CEOF +EOF + +cat >> $CONFIG_STATUS <<\EOF + +# Split the substitutions into bite-sized pieces for seds with +# small command number limits, like on Digital OSF/1 and HP-UX. +ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. +ac_file=1 # Number of current file. +ac_beg=1 # First line for current file. +ac_end=$ac_max_sed_cmds # Line after last line for current file. +ac_more_lines=: +ac_sed_cmds="" +while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file + else + sed "${ac_end}q" conftest.subs > conftest.s$ac_file + fi + if test ! -s conftest.s$ac_file; then + ac_more_lines=false + rm -f conftest.s$ac_file + else + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f conftest.s$ac_file" + else + ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + fi + ac_file=`expr $ac_file + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_cmds` + fi +done +if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat +fi +EOF + +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + case "$ac_given_INSTALL" in + [/$]*) INSTALL="$ac_given_INSTALL" ;; + *) INSTALL="$ac_dots$ac_given_INSTALL" ;; + esac + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +s%@INSTALL@%$INSTALL%g +" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +fi; done +rm -f conftest.s* + +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + diff --git a/diehl/configure.in b/diehl/configure.in new file mode 100644 index 00000000..b9c1be36 --- /dev/null +++ b/diehl/configure.in @@ -0,0 +1,73 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(diehlctrl.c) +AC_PREFIX_DEFAULT("/usr") + +I4LVERSION=${I4LVERSION:-"?.?"} +CONFIG_DATADIR=${CONFIG_DATADIR:-"/usr/lib/isdn"} +CONFIG_SBINDIR=${CONFIG_SBINDIR:-"/sbin"} +CONFIG_MANDIR=${CONFIG_MANDIR:-"/usr/man"} +CONFIG_DIEHLCTRL_DEBUG=${CONFIG_DIEHLCTRL_DEBUG:-"n"} +CONFIG_KERNELDIR=`eval echo ${CONFIG_KERNELDIR:-"/usr/src/linux"}` +MANDATE=`grep CHECKIN diehlctrl.man.in | awk '{print $4}'` + +dnl Checks for programs. +AC_PROG_INSTALL +AC_PROG_CC + +dnl Checks for libraries. + +dnl Checks for header files. +AC_HEADER_STDC +AC_CHECK_HEADERS(fcntl.h sys/ioctl.h unistd.h) + +dnl Find current kernel source +AC_FIND_KERNEL +AC_CHECK_HEADERS($CONFIG_KERNELDIR/include/linux/isdn.h,, + AC_MSG_ERROR("$CONFIG_KERNELDIR/include/linux/isdn.h missing. Kernel installed?") +) +AC_CHECK_HEADERS($CONFIG_KERNELDIR/drivers/isdn/diehl/diehl.h,, + AC_MSG_ERROR("$CONFIG_KERNELDIR/drivers/isdn/diehl/diehl.h missing. Kernel installed?") +) + +dnl Checks for typedefs, structures, and compiler characteristics. + +dnl Checks for library functions. +AC_PROG_GCC_TRADITIONAL +AC_FUNC_MMAP + +dnl Optional firmware directory +AC_ARG_WITH(firmware, + [ --with-firmware=DIR Set dir where firmware istalled. [/usr/lib/isdn]], + CONFIG_DATADIR="${withval}" + AC_DEFINE(CONFIG_DATADIR,"${withval}"), +) + +dnl Optional sbin directory +AC_ARG_WITH(sbin, + [ --with-sbin=DIR Set dir where binary is istalled. [/sbin]], + CONFIG_SBINDIR="${withval}" + AC_DEFINE(CONFIG_SBINDIR,"${withval}"), +) + +dnl Optional man directory +AC_ARG_WITH(man, + [ --with-man=DIR Set manpage dir. [/usr/man]], + CONFIG_MANDIR="${withval}" + AC_DEFINE(CONFIG_MANDIR,"${withval}"), +) + +dnl Check, if user wants dump option for debugging +AC_ARG_ENABLE(dump, + [ --enable-dump Enable dump feature for debugging [no]], + CONFIG_DIEHLCTRL_DEBUG="y" +) + +AC_SUBST(INSTALL) +AC_SUBST(MANDATE) +AC_SUBST(CONFIG_DIEHLCTRL_DEBUG) +AC_SUBST(CONFIG_DATADIR) +AC_SUBST(CONFIG_KERNELDIR) +AC_SUBST(CONFIG_SBINDIR) +AC_SUBST(CONFIG_MANDIR) +AC_SUBST(I4LVERSION) +AC_OUTPUT(Makefile diehlctrl.man) diff --git a/diehl/diehlctrl.c b/diehl/diehlctrl.c new file mode 100644 index 00000000..1f027d93 --- /dev/null +++ b/diehl/diehlctrl.c @@ -0,0 +1,188 @@ +/* $Id: diehlctrl.c,v 1.1 1998/06/12 11:11:45 fritz Exp $ + * + * Diehl-ISDN driver for Linux. (Control-Utility) + * + * Copyright 1998 by Fritz Elfert (fritz@wuemaus.franken.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * $Log: diehlctrl.c,v $ + * Revision 1.1 1998/06/12 11:11:45 fritz + * First checkin, not complete, for Armin only. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +char *cmd; + +void usage() { + fprintf(stderr,"usage: %s shmem [shmem-addr] (get/set memaddr)\n",cmd); + fprintf(stderr," or: %s irq [irq-nr] (get/set irq)\n",cmd); + fprintf(stderr," or: %s load (load firmware)\n",cmd); + exit(-1); +} + +int main(int argc, char **argv) { + int fd; + int tmp; + int ac; + int arg_ofs; + isdn_ioctl_struct ioctl_s; + + cmd = argv[0]; + if (argc > 1) { + if (!strcmp(argv[1], "-d")) { + strcpy(ioctl_s.drvid, argv[2]); + arg_ofs = 3; + } else { + ioctl_s.drvid[0] = '\0'; + arg_ofs = 1; + } + } else + usage(); + ac = argc - (arg_ofs - 1); + if (ac < 2) + usage(); + fd = open("/dev/isdnctrl",O_RDWR); + if (fd < 0) { + perror("/dev/isdnctrl"); + exit(-1); + } + if (!strcmp(argv[arg_ofs], "shmem")) { + if (ac == 3) { + if (sscanf(argv[arg_ofs + 1], "%i", &tmp) !=1 ) + usage(); + ioctl_s.arg = tmp; + if (ioctl(fd, DIEHL_IOCTL_SETMMIO + IIOCDRVCTL, &ioctl_s) < 0) { + perror("ioctl SETMMIO"); + exit(-1); + } + } + if ((tmp = ioctl(fd, DIEHL_IOCTL_GETMMIO + IIOCDRVCTL, &ioctl_s)) < 0) { + perror("ioctl GETMMIO"); + exit(-1); + } + printf("Shared memory at 0x%08lx\n", (unsigned long)tmp); + close(fd); + return 0; + } + if (!strcmp(argv[arg_ofs], "irq")) { + if (ac == 3) { + if (sscanf(argv[arg_ofs + 1], "%i", &tmp) != 1) + usage(); + ioctl_s.arg = tmp; + if (ioctl(fd, DIEHL_IOCTL_SETIRQ + IIOCDRVCTL, &ioctl_s) < 0) { + perror("ioctl SETIRQ"); + exit(-1); + } + } + if ((tmp = ioctl(fd, DIEHL_IOCTL_GETIRQ + IIOCDRVCTL, &ioctl_s)) < 0) { + perror("ioctl GETIRQ"); + exit(-1); + } + printf("Irq is %d\n", tmp); + close(fd); + return 0; + } + if (!strcmp(argv[arg_ofs], "load")) { + FILE *code; + int plen; + char protoname[1024]; + char bootname[1024]; + u_char protobuf[0x100000]; + u_char bootbuf[0x1000]; + diehl_codebuf *cb; + + if (ac == 4) { + strcpy(bootname, argv[arg_ofs + 1]); + strcpy(protoname,argv[arg_ofs + 2]); + if ((tmp = ioctl(fd,DIEHL_IOCTL_GETTYPE + IIOCDRVCTL, &ioctl_s)) < 1) { + perror("ioctl GETTYPE"); + exit(-1); + } + switch (tmp) { + case DIEHL_CTYPE_S: + strcat(bootname,".bin"); + printf("Adapter-type is Diehl-S\n"); + break; + case DIEHL_CTYPE_SX: + strcat(protoname,".sx"); + printf("Adapter-type is Diehl-SX\n"); + break; + case DIEHL_CTYPE_SCOM: + strcat(protoname,".sy"); + printf("Adapter-type is Diehl-SCOM\n"); + break; + case DIEHL_CTYPE_QUADRO: + strcat(protoname,".sq"); + printf("Adapter-type is Diehl-QUADRO\n"); + break; + case DIEHL_CTYPE_PRI: + strcat(protoname,".p"); + printf("Adapter-type is Diehl-PRI\n"); + break; + default: + fprintf(stderr, "Unknown Adapter type %d\n", tmp); + exit(-1); + } + if (!(code = fopen(protoname,"r"))) { + perror(protoname); + exit(-1); + } + if ((plen = fread(protobuf, 1, sizeof(protobuf), code))<1) { + fprintf(stderr, "Read error on %s\n", protoname); + exit(-1); + } + plen = (plen % 256)?((plen/256)+1)*256:plen; + fclose(code); + if (!(code = fopen(bootname,"r"))) { + perror(bootname); + exit(-1); + } + if ((tmp = fread(bootbuf, 1, sizeof(bootbuf), code))<1) { + fprintf(stderr, "Read error on %s\n", bootname); + exit(-1); + } + fclose(code); + cb = malloc(sizeof(diehl_codebuf) + tmp + plen ); + memset(cb, 0, sizeof(diehl_codebuf)); + memcpy(&cb->isa.code, bootbuf, tmp); + memcpy(&cb->isa.code[tmp], protobuf, plen); + cb->isa.bootstrap_len = tmp; + cb->isa.firmware_len = plen; + cb->isa.boot_opt = DIEHL_ISA_BOOT_MEMCHK; + printf("Loading Protocol %s ...\n", &protobuf[4]); + ioctl_s.arg = (ulong)cb; + if (ioctl(fd, DIEHL_IOCTL_LOADBOOT + IIOCDRVCTL, &ioctl_s) < 0) { + perror("ioctl LOADBOOT"); + exit(-1); + } + close(fd); + return 0; + } + usage(); + } + return 0; +} diff --git a/diehl/diehlctrl.man.in b/diehl/diehlctrl.man.in new file mode 100644 index 00000000..37236713 --- /dev/null +++ b/diehl/diehlctrl.man.in @@ -0,0 +1,154 @@ +.\" $Id: diehlctrl.man.in,v 1.1 1998/06/12 11:11:46 fritz Exp $ +.\" +.\" CHECKIN $Date: 1998/06/12 11:11:46 $ +.\" +.\" Process this file with +.\" groff -man -Tascii diehlctrl.1 for ASCII output, or +.\" groff -man -Tps diehlctrl.1 for PostScript output +.\" +.TH DIEHLCTRL 8 "@MANDATE@" isdn4k-utils-@I4LVERSION@ "Linux System Administration" +.SH NAME +diehlctrl \- configure Diehl active ISDN adaptor +.SH SYNOPSIS +.B diehlctrl [-d +.IB Driver-Id ] +.I action options +.B ... +.SH DESCRIPTION +.B diehlctrl +is used to setup the Diehl +.SM ISDN +device driver and for downloading the firmware into the +.SM ISDN +card. +.LP +The use of +.I diehlctrl +makes sense, if you are using an active Diehl ISDN card only. +.LP +.SH OPTIONS +.TP +.BI "-d " Driver-Id +selects the S0 interface named by +.IR Driver-Id . +Driver-Ids are defined during driver initialisation. See +.BR diehl (4) +for a description of the syntax to be used for modularised and +monolithic driver versions. +This option +.B must +be used to identify the S0 interface if more than one S0 interface is +existent. If a single card is used, it may be omitted. +If using more than one card, support for the other cards is enabled +with the +.B add +action of diehlctrl. Ids may +.B not +start with +.B digits +or small +.BR x , +because these values are misinterpreted +as numeric parameters by +.BR insmod . +For loading the module, always the +newest +.B modutils +package should be used to avoid problems during load. +.LP +The following +.I actions +may be given to +.BR diehlctrl . +.TP +.BI "irq [" "interrupt" ] +sets the irq number to use. +After loading the diehl-module into kernel-space, this command +should be used as the very first setup, if the hardware settings are +different from the default settings below. +If both parameters are omitted, prints out current settings. The +default irq number is +.IR 0x320 . +.TP +.B leased on|1|2|off +switches between normal (dialup) and leased-line mode. Leased-line mode +is intended for usage with S64K-lines or - if both channels are used - +for S02. If the second parameter is +.B 1 +, only one channel is enabled. +If the second parameter is +.BR 2 " or " on +both channels are enabled. Leased lines do not have a D-channel. When +leased-line mode is enabled, the driver simulates incoming calls using +special "phone-numbers" for calling and called address which are generated +as follows: +.ie 1 +.RS +Calling number: +.RS +.BI LEASED x +.RS +where +.I x +is the internal slot-number of the S0 interface. This number starts with +.I 0 +for the first S0 interface and is incremented by one for every S0 interface +configured using the +.B add +action. +.RE +.RE +.ie 1 +Called number: +.RS +.I x +.RS +where +.I x +is equal to the channel number of the calling S0 interface starting with +.IR 1 . +.RE +.RE +.RE +.TP +.BI "load " boot-code " " firmware +downloads the firmware into the card and starts operation. The firmware +name +.B must +be given +.B without +extension, since the card-type is determined automatically and according +to this, the appropriate extension is appended by the program. The +following extensions are used for various card-types: +Diehl-S: +.B .bin +Diehl-SX: +.B .sx +Diehl-SCOM: +.B .sy +Diehl-Quadro: +.B .sq +Diehl-PRI +.B .p +Using this command, after loading the diehl-module into kernel-space the +first real access to the hardware is done. Therefore the +.B irq +action above, should be used before, if the hardware settings are different +from the default settings. +Usually the images are located in +.IR @DATADIR@ . +The boot-code is named +.IR prload.bin . +.TP +.B dump +is available if the program is configured using the +.B --enable-dump +option only. The contents of internal driver variables is dumped on stdout. +.LP +.SH BUGS +No bugs so far. +.SH AUTHOR +\(co 1998 by Fritz Elfert +.LP +.SH SEE ALSO +.BR isdnctrl "(8), " diehl "(4), " isdnctrl "(4), " ttyI (4). diff --git a/diehl/install-sh b/diehl/install-sh new file mode 100755 index 00000000..039e4d00 --- /dev/null +++ b/diehl/install-sh @@ -0,0 +1,2 @@ +#!/bin/sh +exit 0