diff --git a/FAQ/_howto/386-40.txt b/FAQ/_howto/386-40.txt new file mode 100644 index 00000000..07a9131e --- /dev/null +++ b/FAQ/_howto/386-40.txt @@ -0,0 +1,99 @@ +Return-Path: owner-isdn4linux@hub-wue.franken.de +Received: from hsun6.wi-inf.uni-essen.de by aixrs1.hrz.uni-essen.de (AIX 4.1/UCB 5.64/4.03) + id AA50180; Sat, 15 Mar 1997 01:13:08 +0100 +Received: from rachael.franken.de by hsun6.wi-inf.uni-essen.de (SMI-8.6/SMI-SVR4) + id BAA17710; Sat, 15 Mar 1997 01:14:40 +0100 +Received: from oops.franken.de by rachael.franken.de with smtp + (Smail3.1.29.1 #8) id m0w5dUP-000oRUa; Fri, 14 Mar 97 21:22 MET +Received: by oops.franken.de (Linux Smail3.1.29.1 #1) + id m0w5dSE-001Iada; Fri, 14 Mar 97 21:19 MET +Received: from hub-wue.franken.de by oops.franken.de with smtp + (Linux Smail3.1.29.1 #1) id m0w5dSA-001IacE; Fri, 14 Mar 97 21:19 MET +Received: from goofy.chess.langenfeld.de by hub-wue.franken.de with smtp + (Smail3.1.29.1 #1) id m0w5dSd-000BltC; Fri, 14 Mar 97 21:20 MET +Received: (from tom@localhost) by goofy.chess.langenfeld.de (8.7.5/8.7.3) id VAA00934 for isdn4linux@hub-wue.franken.de; Fri, 14 Mar 1997 21:19:37 +0100 +From: Thomas Heiling +Message-Id: <199703142019.VAA00934@goofy.chess.langenfeld.de> +Subject: MASQ: TCP/UDP checksum errors SOLVED! +To: isdn4linux@hub-wue.franken.de +Date: Fri, 14 Mar 1997 21:19:35 +0100 (MET) +X-Mailer: ELM [version 2.4 PL25 PGP2] +Mime-Version: 1.0 +Content-Type: text/plain; charset=US-ASCII +Content-Transfer-Encoding: 7bit +Sender: owner-isdn4linux@hub-wue.franken.de +Precedence: bulk + +Hello! +after some tweaking and testing I have solved the problem with +the checksum errors. ( Apparently and hopefully, up to now no +more error messages) +Because of the slowness of my computer (thanks Fritz!) I have done +two things: +a) changed the IRQ from 15 to 5 for the Teles card -> the Teles is now +on the Master controller +b) got irqtune and changed the priority for the teles card to maximum +in favour of disk. ( irqtune 5 ) +With this two changes I was able to cure my errors from HiSax: +MASQ: failed TCP/UDP checksum from xx.xx.xx.xx! +for the Teles-driver the following error messages: +Teles: HSCX RDO mode=2 + HSCX B EXIR 40 +Possibly the first solution would be sufficient, but what the heck, +don't touch a running system. + +The original message is included below and yes I know my reply address +is wrong and should be heiling@online-club.de. I will fix +this really soon now, if my new Debian CD has arrived. +Thanks +Dr. Thomas Heiling +> +> Newsgroups: comp.os.linux.networking +> Subject: MASQ:failed TCP/UDP checksum ? +> Reply-To: heiling@mail.online-club.de +> Followup-To: +> Keywords: +> Summary: +> +> Hello! +> I am running Linux 2.0.29 with the isdnlinux-patches and +> with the hisax driver. I have configured this system as a router, +> that means with IP_FIREWALL and IP_MASQUERADING enabled. +> The connectivity from the Linux computer is o.k. and the first time +> the private net "behind " the firewall had access to the internet. +> If I start the Windows Microsoft Explorer from another machine and +> do some surfing everything went fine. +> But after some time I get something like this: +> Mar 8 20:42:24 goofy kernel: MASQ: failed TCP/UDP checksum from +> 194.77.170.27! +> and the Windows computer hungs up. +> The first thought was, that the "Optimize as router not as host" config +> is not 100% error proven, so I compiled a new kernel without this option +> and tried again. But the same error message comes up again. +> Thanks for any pointers and help +> +> My System: +> 386/40 Mhz + CoPro, 20 MB RAM, 2 * 520 MB harddisk +> Teles 16.3 Isdn card ( with HiSax 2.0 + Patch 1-3), +> Adaptec 1542 + CD-Rom +> The system was first a Debian 1.1 System, but now I had done some +> tweaking and compiled/installed new versions. +> The System is connected via ISDN/PPP and the Firewall is up. +> +> +> Dr. Thomas Heiling +> email: heiling@online-club.de +> +> --------------------------------------------------- +> To remove yourself from this mailing list send +> email to majordomo@hub-wue.franken.de containing +> "unsubscribe isdn4linux " in +> the message body [-vg] +> +> + +--------------------------------------------------- +To remove yourself from this mailing list send +email to majordomo@hub-wue.franken.de containing +"unsubscribe isdn4linux " in +the message body [-vg] diff --git a/FAQ/_howto/cisco_config.txt b/FAQ/_howto/cisco_config.txt new file mode 100644 index 00000000..463d6fe0 --- /dev/null +++ b/FAQ/_howto/cisco_config.txt @@ -0,0 +1,121 @@ +Return-Path: owner-isdn4linux@hub-wue.franken.de +Received: from hsun6.wi-inf.uni-essen.de by aixrs1.hrz.uni-essen.de (AIX 4.1/UCB 5.64/4.03) + id AA24066; Tue, 11 Mar 1997 18:40:54 +0100 +Received: from rachael.franken.de by hsun6.wi-inf.uni-essen.de (SMI-8.6/SMI-SVR4) + id SAA21704; Tue, 11 Mar 1997 18:42:29 +0100 +Received: from oops.franken.de by rachael.franken.de with smtp + (Smail3.1.29.1 #8) id m0w4PZW-000oJva; Tue, 11 Mar 97 12:18 MET +Received: by oops.franken.de (Linux Smail3.1.29.1 #1) + id m0w4PXH-001IS9a; Tue, 11 Mar 97 12:16 MET +Received: from hub-wue.franken.de by oops.franken.de with smtp + (Linux Smail3.1.29.1 #1) id m0w4PXB-001IS8E; Tue, 11 Mar 97 12:15 MET +Received: from kermit.mbo.de by hub-wue.franken.de with smtp + (Smail3.1.29.1 #1) id m0w4PYD-000BmGC; Tue, 11 Mar 97 12:17 MET +Received: (from lars@localhost) by kermit.mbo.de (8.7.5/8.6.12) id MAA28434 for isdn4linux@hub-wue.franken.de; Tue, 11 Mar 1997 12:18:02 +0100 +From: Lars Maier +Message-Id: <199703111118.MAA28434@kermit.mbo.de> +Subject: Nochmal Cisco 1003<->i4l +To: isdn4linux@hub-wue.franken.de +Date: Tue, 11 Mar 1997 12:18:02 +0100 (MET) +X-Mailer: ELM [version 2.4 PL25] +Mime-Version: 1.0 +Content-Type: text/plain; charset=iso-8859-1 +Content-Transfer-Encoding: 8bit +Sender: owner-isdn4linux@hub-wue.franken.de +Precedence: bulk + +Hallo, +leider habe ich immernoch folgendes Problem: +Eine Cisco 1003 soll sich auf einer Linux-Kiste ohne PPP einwaehlen. +Die Cisco erkennt die Routen nicht nach dem booten, sondern erst +nach +clear interface bri0 +oder +einem Anruf auf einer msm des NT's, an dem die Cisco haengt +oder Zustecken eines 2. Geraetes auf den SO + damit telefonieren. +Anschliessend tut die Cisco was sie soll. +Ist bri0 mit encapsulation PPP Konfiguriert, erkennt die Cisco die +Routen ohne Hilfe. +Ios Version ist: 11.1(6) +Hat jemand eine Idee, wie sich dieses Problem loesen laesst? + +Gruss + +Lars + +--------- +Konfiguration, show ip route : +--------- + +Using 912 out of 7506 bytes +! +version 11.1 +no service pad +service udp-small-servers +service tcp-small-servers +! +hostname kraemer-1 +! +boot system flash +boot system host 255.255.255.255 +enable secret 5 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX +enable password XXXXXX +! +ip subnet-zero +isdn switch-type basic-net3 +! +interface Ethernet0 + ip address 194.221.188.225 255.255.255.240 +! +interface BRI0 + ip address 194.221.188.17 255.255.255.252 + bandwidth 64 + no keepalive + dialer idle-timeout 300 + dialer map ip 194.221.188.18 name 7531915XXX 07531915XXX + dialer-group 1 +! +ip domain-name wdkraemer.de +ip name-server 194.221.188.5 +ip classless +ip route 0.0.0.0 0.0.0.0 194.221.188.18 +ip route 10.0.0.0 255.0.0.0 Null0 +ip route 127.0.0.0 255.0.0.0 Null0 +ip route 172.16.0.0 255.240.0.0 Null0 +ip route 192.0.2.0 255.255.255.0 Null0 +ip route 192.168.0.0 255.255.0.0 Null0 +dialer-list 1 protocol ip permit +! +line con 0 +line vty 0 4 + password XXXXXX + login +! +end + +-------- +So sollte es nicht sein: +S 10.0.0.0/8 is directly connected, Null0 +S 127.0.0.0/8 is directly connected, Null0 + 194.221.188.0/24 is subnetted, 1 subnets +C 194.221.188.224 is directly connected, Ethernet0 +S 192.0.2.0/24 is directly connected, Null0 +S 192.168.0.0/16 is directly connected, Null0 +S 172.16.0.0/12 is directly connected, Null0 + +So ist es mit Nachhilfe, oder bei PPP: +S 10.0.0.0/8 is directly connected, Null0 +S 127.0.0.0/8 is directly connected, Null0 + 194.221.188.0/24 is variably subnetted, 2 subnets, 2 masks +C 194.221.188.224/28 is directly connected, Ethernet0 +C 194.221.188.16/30 is directly connected, BRI0 +S 192.0.2.0/24 is directly connected, Null0 +S* 0.0.0.0/0 [1/0] via 194.221.188.18 +S 192.168.0.0/16 is directly connected, Null0 +S 172.16.0.0/12 is directly connected, Null0 + +--------------------------------------------------- +To remove yourself from this mailing list send +email to majordomo@hub-wue.franken.de containing +"unsubscribe isdn4linux " in +the message body [-vg] diff --git a/FAQ/_howto/dialout.txt b/FAQ/_howto/dialout.txt new file mode 100644 index 00000000..5cab142f --- /dev/null +++ b/FAQ/_howto/dialout.txt @@ -0,0 +1,228 @@ +Return-Path: POPmail +X-Envelope-From: +X-Envelope-To: +X-Delivery-Time: 940694442 +Received: from abaco.to.com (abaco.to.com [194.221.235.40]) + by post.webmailer.de (8.9.3/8.8.7) with ESMTP id SAA10046 + for ; Sat, 23 Oct 1999 18:00:42 +0200 (MET DST) +Received: by listserv.isdn4linux.de id <80305-340>; Sat, 23 Oct 1999 18:00:15 +0200 +Received: from news.wuecom.de (IDENT:news@news.wuecom.de [194.120.69.13]) + by abaco.to.com (8.9.1/8.9.1) with ESMTP id SAA22667 + for ; Sat, 23 Oct 1999 18:00:14 +0200 +From: kurt_erich_finger@my-deja.com +Received: (from news@localhost) + by news.wuecom.de (8.8.7/8.8.7) id SAA15677 + for isdn4linux@listserv.isdn4linux.de; Sat, 23 Oct 1999 18:00:13 +0200 +To: isdn4linux@listserv.isdn4linux.de +Newsgroups: de.alt.comm.isdn4linux +Subject: HOWTO Linux ISDN Internet +Date: Sat, 23 Oct 1999 15:50:00 GMT +Organization: Deja.com - Before you buy. +Lines: 188 +Message-ID: <7uslf8$qff$1@nnrp1.deja.com> +NNTP-Posting-Host: 212.144.81.33 +X-Article-Creation-Date: Sat Oct 23 15:50:00 1999 GMT +X-Http-User-Agent: Mozilla/4.0 (compatible; MSIE 5.0; Windows 98) +X-Http-Proxy: 1.1 x30.deja.com:80 (Squid/1.1.22) for client 212.144.81.33 +X-MyDeja-Info: XMYDJUIDkurt_erich_finger +Xref: news.wuecom.de!news.think.de!news.mayn.franken.de de.alt.comm.isdn4linux:42693 +X-Gateway: isdn4linux-newsgate +X-Gateway-Admin: fritz@isdn4linux.de +Sender: owner-isdn4linux@listserv.isdn4linux.de +Precedence: bulk +X-Loop: isdn4linux + +Da es nicht ganz so einfach ist mit ISDN ins Internet zu kommen, +hab ich mal einiges zusammengeschrieben.(in Englisch, damit auch +andere etwas davon haben). Ich hab's auch nur mit Hilfe der +newsgroup geschafft. Vielleicht sind folgende Zeilen fuer einige +user ja ganz nuetzlich. Fuer Details ist dann das Linux (ISDN) Howto +ganz nuetzlich. + +Falls jemand der Meinung ist, dieses Posting war unnoetig,lasst es mich +wissen + +Kurt-Erich Finger + +---beginners only---- +I tried get into the internet using LINUX and an ISDN-card. +In the manual for the LINUX distribution (SuSE 6.1) almost everything +was explained but some crucial information (for a newbee) is missing. +With the help of this newsgroup I was able to overcome the problems. +I thought it would be a good idea to write a tiny HOWTO for beginners. +Since ISDN is not only used in Germany but also in other countries I +decided to only write it in English. +(If you think this should not appear here, please let me know.) +I choose otelo to give a working example, if you prefer another provider +you can change the details later. If you don't live in Germany modify +the +example as necessary. + +My configuration: + SuSE 6.1 + Kernel 2.2.5 + ISDN-utils 3.0 + Virgin PC with Win98 and LINUX (loadlin) + Fritz!card PnP (no other cards) + +1.Try to find out which IRQ and Port can be used. If you run the card + already under Win you can find it under >Setting>System. + (I use IRQ=3, address: 200, I know there could be conflicts with +COM2!) + +PnP cards: +2. run/sbin/pnpdump -c > /etc/isapnp.conf + Edit /etc/isapnp.conf + + (READPORT 0x0203) + (ISOLATE PRESERVE) + (IDENTIFY *) + (VERBOSITY 2) + (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING + + (CONFIGURE AVM0900/-1 (LD 0 + (IO 0 (SIZE 32) (BASE 0x0200)(CHECK) ) + (INT 0 (IRQ 3 (MODE +E))) + (NAME "AVM0900/-1[0]{AVM ISDN-Controller FRITZ!Card}") + (ACT Y) + )) + (WAITFORKEY) + + The lines (IO (SIZE 32) (BASE Ox0200)) and (INT 0 (IRQ 3 (MODE +E)) +should + contain the values you want. If necessary remove the # signs at the + beginning of all above lines. + + Save the file and start + isapnp /etc/isapnp.conf + If you receive an -FATAL- error message, first delete : + (CHECK) !!!!! + in the configuration file and start isapnp again. + If you still get resource conflicts try other IRQ's and addresses. + Switch the auto configuration for ISA-pnp the BIOS off. + If you get an ISOLATE PRESERVE error, reboot. + +all cards: + +3. Run Yast + Strictly follow the SuSE manual. + + A device named ippp0 must exist!!!!!! + + I assume you want to connect to a provider who uses dynamic IP- +addresses + syncPPP and PAP or CHAP for authorising. + I will describe how you can make a connection to otelo (Germany) +since + you can connect directly without an account (username:otelo, + password: online) + + Using Yast the IP-Address can be : 192.168.0.99 + Netmask : 255.255.255.255 + Default -gateway : - + IP-Adress PtP : 192.168.0.1 + The last address could cause problems with t-online, use 192.168.1.1 + + Configure the Name-Server: + List of IP Addresses : 195.50.149.33 195.50.149.6 + List of Domains : otelo-online.de +Leave Yast + +Make sure the file /etc/isdn/isdn.conf contains +your COUNTRYCODE and AREACODE without the leading 0 +Boot or activate ISDN under Yast to start the network. + +When you configure with Yast the PAP protocol is set. +otelo and probably some other provider need CHAP!!!! + +Let's see what happens if we try to connect: + isdnctrl dial ippp0 +will try to connect to your provider. +Check /var/log/messages! +If you don't see local and remote IP addresses but +ISDN error messages or a 'Modem Hangup' something went wrong. +To find out you need more information in the messages file. +Edit /etc/rc.config.d/I4L_sp_option.rc.config + I4L_VERBOSE=yes +and in /etc/ppp/ioptions +uncomment debug. +This should give enough information in the /var/log/message file. + +If you try to connect to otelo you will find that your computer +is sending a string containing and otelo sends indicating +that you have to change the protocol from PAP to CHAP. +To change the protocol you have to add + user otelo in /etc/ppp/options.ipp0 +add + # client server secret IP addresses + "otelo" * "online" +to /etc/ppp/chap-secrets and delete the corresponding line in +/etc/ppp/pap-secrets. + +Start isdnctrl dail ippp0 and watch /var/log/messages. If you seen see +IP addresses you made it. +Otherwise read some of the links in the Weekly ISDN FAQ of E.Corry. + +Now you have a connection to your provider and you may want to use the +Netscape Navigator. +First another problem needs to be solved: +If no traffic is on the line it will be cut and the default route will +be deleted. +(You will find the time-out in /etc/rc.config.d/I4L_option.rc.config +I4L_IDLETIME) + +The file /etc/ppp/ip-up (ip-down is only a link to ip-up) has to be +modified: +BASENAME=`basename $0` +INTERFACE=$1 +DEVICE=$2 +SPEED=$3 +LOCALIP=$4 +REMOTEIP=$5 + +case "$BASENAME" in +ip-up) + /sbin/route add default gw $REMOTEIP dev $INTERFACE + #/sbin/init.d/route start $INTERFACE + ;; +ip-down) + /sbin/route add default gw $REMOTEIP dev $INTERFACE + #/sbin/init.d/route start $INTERFACE + ;; +*) + ;; +esac + +(from http://www.suse.de/sdb/de/html/isdn-defroute.html (dynamic IP- +numbers)) + +Now you can start + isdnctrl dial ippp0 + startx (kde) + Netscape + +I hope it works with you! + +In case of problems check-out http://www.suse.de +deutsch: http://www.franken/de/users/klaus/DE-ISDN-HOWTO +English: http://www.wurtel.demon.nl +French: http://www.perso.wanadoo.fr/philippe.latu + + +Kurt-Erich Finger + + + + + + + + +Sent via Deja.com http://www.deja.com/ +Before you buy. +--------------------------------------------------- +To remove yourself from this mailing list send +email to majordomo@listserv.isdn4linux.de containing +"unsubscribe isdn4linux " in +the message body. + diff --git a/FAQ/_howto/dynamic_static.txt b/FAQ/_howto/dynamic_static.txt new file mode 100644 index 00000000..77635129 --- /dev/null +++ b/FAQ/_howto/dynamic_static.txt @@ -0,0 +1,136 @@ +Return-Path: owner-isdn4linux@hub-wue.franken.de +Return-Path: +Received: from rachael.franken.de by hsun6.wi-inf.uni-essen.de (SMI-8.6/SMI-SVR4) + id SAA05994; Thu, 15 May 1997 18:44:02 +0200 +Received: from oops.franken.de by rachael.franken.de with smtp + (Smail3.1.29.1 #8) id m0wS0qb-000oQya; Thu, 15 May 97 15:45 MET DST +Received: by oops.franken.de (Linux Smail3.1.29.1 #1) + id m0wS0yX-001IV8a; Thu, 15 May 97 15:53 MET DST +Received: from hub-wue.franken.de by oops.franken.de with smtp + (Linux Smail3.1.29.1 #1) id m0wS0yR-001IV7E; Thu, 15 May 97 15:53 MET DST +Received: from lion.euromedia.nl by hub-wue.franken.de with smtp + (Smail3.1.29.1 #1) id m0wS0pO-000BnEC; Thu, 15 May 97 15:44 MET DST +Received: from localhost (barry@localhost) + by lion.euromedia.nl (8.8.5/8.8.5) with SMTP id OAA01009 + for ; Thu, 15 May 1997 14:44:01 +0100 +Date: Thu, 15 May 1997 15:44:01 +0200 (MET DST) +From: Barry Lagerweij +Reply-To: Barry Lagerweij +To: isdn4linux@hub-wue.franken.de +Subject: static *AND* dynamic IP addresses +Message-ID: +MIME-Version: 1.0 +Sender: owner-isdn4linux@hub-wue.franken.de +Precedence: bulk +Content-Type: TEXT/PLAIN; charset=US-ASCII +Content-Length: 4060 + +Hi everyone, + +I've been running ipppd with isdn4linux very succesful so far, using +dynamic IP addresses. Just create ippp0 and ippp1 with isdnctrl, and bind +each of them to a port, and use ifconfig to configure ippp0 and ippp1 to a +certain IP-address. +When a call comes in, ipppd will select either ippp0 or ippp1, and use +that IP address. But now I want all my regular callers to get a dynamic IP +address, but a few of the callers should be assigned a static IP address. + +I've been trying everything, and finally I came up with the answer : + +1) create the interfaces with isdnctrl: +---cut-here--- +/sbin/ifconfig $DEVICE down +$ISDNBIN delif $DEVICE # Create new interface 'DEVICE' +$ISDNBIN addif $DEVICE # Create new interface 'DEVICE' +$ISDNBIN addphone $DEVICE in \* # Set incoming phone-number +$ISDNBIN eaz $DEVICE $LOCAL_NUMBER # Set local EAZ .. +$ISDNBIN l2_prot $DEVICE hdlc # for sync PPP: set Level 2 to HDLC +$ISDNBIN l3_prot $DEVICE trans # not really necessary, 'trans' is default +$ISDNBIN encap $DEVICE syncppp # encap the IP Pakets in PPP frames +$ISDNBIN huptimeout $DEVICE 600 # Hangup-Timeout is 600 sec. +$ISDNBIN chargehup $DEVICE off # Hangup before next Charge-Info +$ISDNBIN pppbind $DEVICE 0 +---cut-here--- + +2) Then I start the ipppd : +---cut-here--- +/sbin/ipppd \ + -vjccomp -ac -pc \ + mru 1524 \ + -bsdcomp \ + -detach \ + debug \ + auth \ + +pap \ + useifip \ + proxyarp \ + login \ + ms-dns $LOCAL_IP \ + domain euromedia.nl \ + ipcp-accept-remote \ + $DEVICE $DEVICE2 & +---cut-here--- + +Please note the 'useifip' and 'ipcp-accept-remote'. If the client offers a +IP-address that is acceptable for ipppd, but ipppd does not +'ipcp-accept-remote', that IP-address is NAK-ed by ipppd (I think this is +a bug!!!), so I must add 'ipcp-accept-remote'. + +The nifty stuff is done in 'auth-up' and 'ip-up' : +auth-up: +---cut-here--- +#!/bin/sh +if [ $2 = staticuser ]; then + /sbin/ifconfig $1 194.183.96.3 pointopoint 194.183.96.227 metric 1 +else + if [ $1 = ippp0 ]; then + /sbin/ifconfig $1 194.183.96.3 pointopoint 194.183.96.225 metric 1 + elif [$1 = ippp1 ]; then + /sbin/ifconfig $1 194.183.96.3 pointopoint 194.183.96.226 metric 1 + fi +fi +if [ $2 = routeuser1 ]; then + /sbin/route del 194.183.120.0 + /sbin/route add -net 194.183.120.0 netmask 255.255.255.252 $1 +elif [ $2 = routeuser2 ]; then + /sbin/route del 194.183.120.8 + /sbin/route add -net 194.183.120.8 netmask 255.255.255.248 $1 +elif [ $2 = routeuser2 ]; then + /sbin/route del 194.183.120.16 + /sbin/route add -net 194.183.120.16 netmask 255.255.255.252 $1 +fi +---cut-here--- + +As you can see, I have one static-IP address user. All other callers are +assigned a IP-address based on the isdn-device (ippp0 or ippp1). +Furthermore, I have three callers that need to be assigned a pool of +IP-addresses. (a subnet of 4 or 8 addresses). This is used for ISDN +routers, like the Ascend or 3com. All of these routes are configured +dynamically when that user logs-in, and deleted as soon as the user hangs +up. +Since ipppd is started with 'useifip', ipppd will use the IP-address that +has just been assigned by ifconfig (in auth-up) !!! + +Finally, the route to the interface itself is made, in ip-up : +---cut-here--- +#!/bin/sh +/sbin/route add -host $5 $1 +---cut-here--- + +In auth-down and ip-down the route is deleted. This allows me to have +static and dynamic IP-addresses, based on the username, and to have extra +routes added to the device, based on the username. + +I don't know if this is the correct way to do it, but it works for me ! + +PS: only a few users are allowed ISDN access. So I've modified pathnames.h +to point to '/etc/ippp' instead of '/etc/ppp'. This way I can have a +different PPP setup for analog and ISDN callers. + +Barry Lagerweij + +--------------------------------------------------- +To remove yourself from this mailing list send +email to majordomo@hub-wue.franken.de containing +"unsubscribe isdn4linux " in +the message body [-vg] diff --git a/FAQ/_howto/lzscomp.txt b/FAQ/_howto/lzscomp.txt new file mode 100644 index 00000000..bbf22653 --- /dev/null +++ b/FAQ/_howto/lzscomp.txt @@ -0,0 +1,87 @@ +Return-Path: a0037@stud.uni-bayreuth.de +Newsgroups: de.alt.comm.isdn4linux +Subject: Re: LZS: Max will es nicht annehmen +Reply-To: Juergen Leising + +On Sat, Mar 06, 1999 at 04:52:45PM +0100, Karsten Gessner wrote: +> kann mal jemand die Schritte in Kurzform posten, +> die zu einer lauffähigen Version der lzscomp führen "müssten" ! + +Hi - + +- das Ganze geht nur fuer kernel 2.1.x / 2.2.x +- Neue Dateien von http://www.ibh-dd.de/~beck/stuff/lzs4i4l/ holen +- ccp.c in das ipppd-Unterverzeichnis der isdn4k-utils kopieren +- isdn_lzscomp.c nach /usr/src/linux-2.2.1/drivers/isdn kopieren (oder welcher + kernel eben verwendet wird) +- /usr/src/linux-2.2.1/drivers/isdn/Makefile editieren: Wenn das ISDN-Subsystem + modular gebaut ist, sieht das Makefile dann so aus: + + ifeq ($(CONFIG_ISDN),m) + M_OBJS += isdn.o + O_TARGET += isdn.o + O_OBJS += isdn_net.o isdn_tty.o isdn_v110.o + OX_OBJS += isdn_common.o + ifdef CONFIG_ISDN_PPP + O_OBJS += isdn_ppp.o + M_OBJS += isdn_bsdcomp.o + M_OBJS += isdn_lzscomp.o + endif + +- kernel neu kompilieren +- isdn-utilities neu kompilieren +- zusaetzlich beim ISDN-Module laden muessen die Kompressions-Module auch noch + geladen werden, z. B. + + /sbin/insmod isdn_bsdcomp + /sbin/insmod isdn_lzscomp comp=8 debug=3 + + comp und debug je nach Bedarf aendern; hierzu das README des obigen URLS lesen + +- /etc/ppp/ioptions.ipppx (je nach dem, welcher ipppd einen kompressionsfaehigen peer + ansprechen soll) + z. B. + + bsdcomp 15,15 + lzs 1:4 + + 1 ist die Zahl der histories (so 'was wie frames), 4 der checkmode (Fehlerkorrektur) + + aber diese Werte haengen ganz vom peer ab; welche Werte sind richtig? + - Hierzu wieder das README lesen + - Debugging hoch genug einstellen, um die Kommunikation zwischen peer und eigenem + Rechner verfolgen zu koennen; demgemaess die Werte fuer die Module aendern/einstellen. + + + +- kann der peer kein ccp: Pech gehabt +- ist der peer eine pre-RFC-Ascend: Pech gehabt. + +Wer fuer diese beiden Faelle eine Loesung hat - mail an mich, bitte. + + +Tschuess, Juergen. + + +-- +***************************************************************** +* Juergen Leising, E-Mail: juergen.leising@stud.uni-bayreuth.de * +* http://www.stud.uni-bayreuth.de/~a0037/ * +***************************************************************** +--------------------------------------------------- +To remove yourself from this mailing list send +email to majordomo@hub-wue.franken.de containing +"unsubscribe isdn4linux " in +the message body [-vg] + + +-- +I have seen her. That is enough, perhaps. +Pug smiled. "You are a rare man." + Raymond E Feist - The King's Buccaneer +--------------------------------------------------- +To remove yourself from this mailing list send +email to majordomo@listserv.isdn4linux.de containing +"unsubscribe isdn4linux " in +the message body. + diff --git a/FAQ/_howto/nokia7110_dialing.txt b/FAQ/_howto/nokia7110_dialing.txt new file mode 100644 index 00000000..5f96f07f --- /dev/null +++ b/FAQ/_howto/nokia7110_dialing.txt @@ -0,0 +1,104 @@ +From owner-isdn4linux@listserv.isdn4linux.de Sun Oct 29 22:16:25 2000 +Return-Path: +Received: from localhost (mathes@localhost [127.0.0.1]) + by athlet.mhessler.de (8.8.8/8.8.8) with ESMTP id WAA02008 + for ; Sun, 29 Oct 2000 22:16:25 +0100 +X-Envelope-From: +X-Envelope-To: +X-Delivery-Time: 971869541 +Received: from post.strato.de + by fetchmail-4.6.0 POP3 + for (single-drop); Sun, 29 Oct 2000 22:16:25 MET +Received: from server-007.to.com (server-007.to.com [194.221.235.10]) + by post.webmailer.de (8.9.3/8.8.7) with ESMTP id NAA01812 + for ; Wed, 18 Oct 2000 13:44:42 +0200 (MET DST) +Received: by server-007.to.com (Postfix) + id B5E8F13CE0; Wed, 18 Oct 2000 13:43:26 +0200 (CEST) +Delivered-To: isdn4linux-outgoing@server-007.to.com +Received: by server-007.to.com (Postfix, from userid 88) + id AA80813CE4; Wed, 18 Oct 2000 13:43:26 +0200 (CEST) +Delivered-To: isdn4linux@listserv.isdn4linux.de +Received: from inonet.com (unknown [212.117.66.174]) + by server-007.to.com (Postfix) with ESMTP id 3DA2513CE0 + for ; Wed, 18 Oct 2000 13:43:26 +0200 (CEST) +Received: from 12er.inonet.com [62.158.199.41] by inonet.com with ESMTP + (SMTPD32-5.01) id AEBD4CE00AA; Wed, 18 Oct 2000 13:51:25 +03d0 +Received: from inonet.com (laser.inonet.com [192.168.0.11]) + by 12er.inonet.com (8.8.8/8.8.8) with ESMTP id NAA00393; + Wed, 18 Oct 2000 13:07:39 +0200 +Message-ID: <39ED8AFA.35AB9D5E@inonet.com> +Date: Wed, 18 Oct 2000 13:35:22 +0200 +From: Matthias Lenhardt +Organization: InoNet Computer GmbH +X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.2.10 i686) +X-Accept-Language: de-DE, en +MIME-Version: 1.0 +To: Tom Sedge , isdn4linux@listserv.isdn4linux.de +Subject: Re: Nokia 7110 -> ISDN questions +References: +Content-Type: text/plain; charset=us-ascii +Content-Transfer-Encoding: 7bit +Sender: owner-isdn4linux@listserv.isdn4linux.de +Precedence: bulk +X-Loop: isdn4linux + +Tom Sedge wrote: +> +> Hi, +> +> I'm trying to get a Nokia 7110 calling in to a Linux ISDN box, but am a +> little confused (even after reading the V.110 Mini-FAQ). +> +> I want to WAP browse directly from the phone, there is no PDA connected to +> it. + +Hi Tom, +unfortunately, I can't tell you why your configuration doesn't work, but +I +can show you mine. It allows me to dail into a Linux box with the Nokia +7110 mobile and access local WAP contents: + +/etc/inittab: +# ISDN Dialin for WAP +# Settings for Nokia 7110 +i0:23:respawn:/usr/sbin/mgetty -m '"" +AT&B512&E&X0S14=4S19=197&R9600 OK' -s 38400 /dev/ttyI0 + +/etc/mgetty+sendfax/login.config: +/AutoPPP/ - root /usr/sbin/pppd file /etc/ppp/wap.conf + +/etc/ppp/wap.conf: +-vjccomp -ac -pc -vj +name +192.168.1.200:192.168.1.201 +netmask 255.255.255.0 +ipcp-accept-local +ipcp-accept-remote +noauth +nodetach +noipx +mru 296 +proxyarp +lock +asyncmap 0 +idle +60 + +Hope that helps, +Matthias +-- +<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>> +Matthias Lenhardt - Software Ingenieur + mail:mlenhardt@inonet.com +InoNet Computer GmbH + http://www.inonet.com/ +Computers are like air conditioners: +They stop working properly if you open windows. +<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>> + +--------------------------------------------------- +To remove yourself from this mailing list send +email to majordomo@listserv.isdn4linux.de containing +"unsubscribe isdn4linux " in +the message body. + diff --git a/FAQ/_howto/pppcosts.txt b/FAQ/_howto/pppcosts.txt new file mode 100644 index 00000000..58c77c45 --- /dev/null +++ b/FAQ/_howto/pppcosts.txt @@ -0,0 +1,64 @@ +Return-Path: POPmail +Return-Path: +Received: from rachael.franken.de by hsun6.wi-inf.uni-essen.de (SMI-8.6/SMI-SVR4) + id BAA15222; Wed, 2 Apr 1997 01:42:14 +0200 +Received: from oops.franken.de by rachael.franken.de with smtp + (Smail3.1.29.1 #8) id m0wC9b7-000oMha; Tue, 1 Apr 97 21:52 MET DST +Received: by oops.franken.de (Linux Smail3.1.29.1 #1) + id m0wC9Zz-001Ib6a; Tue, 1 Apr 97 21:50 MET DST +Received: from hub-wue.franken.de by oops.franken.de with smtp + (Linux Smail3.1.29.1 #1) id m0wC9Zv-001Ib5E; Tue, 1 Apr 97 21:50 MET DST +Received: from oops.franken.de by hub-wue.franken.de with smtp + (Smail3.1.29.1 #1) id m0wC9a3-000Bm6C; Tue, 1 Apr 97 21:50 MET DST +Received: by oops.franken.de (Linux Smail3.1.29.1 #1) + id m0wC9Zr-001Ib5E; Tue, 1 Apr 97 21:50 MET DST +To: isdn4linux@hub-wue.franken.de +Xref: oops de.alt.comm.isdn4linux:2619 +From: Tillmann Steinbrecher +Newsgroups: de.alt.comm.isdn4linux +Subject: pppcosts 0.04 (Telefonkostenanzeige für PPP) jetzt auch für ISDN! +Date: Tue, 01 Apr 1997 18:09:58 +0200 +Organization: http://people.frankfurt.netsurf.de/tst/ +Lines: 25 +Message-ID: <33413356.E22991E@darmstadt.netsurf.de> +Reply-To: tst@darmstadt.netsurf.de,0050763@telmi.de +NNTP-Posting-Host: board-49.darmstadt.netsurf.de +Mime-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Mailer: Mozilla 4.0b2 (X11; I; Linux 2.0.28 i586) +X-Priority: 3 (Normal) +Sender: owner-isdn4linux@hub-wue.franken.de +Precedence: bulk +Content-Type: text/plain; charset=us-ascii + +Hi, + +die neue Version von pppcosts (Programm zur Kostenberechnung +für PPP-Verbindungen, zeigt Online-Zeit und Telefonkosten +z.B. in einem kleinen Fenster an) ist jetzt verfügbar. +Sie funktioniert jetzt auch mit ISDN, deshalb das Announcement +hier. + +Wer Interesse hat: + +http://people.darmstadt.netsurf.de/tst/pppcosts.htm + +Ist demnächst auch auf SunSite; zur Zeit noch im +Incoming-Verzeichnis, später dann auch in +sunsite.unc.edu /pub/Linux/system/network/serial/ +pppcosts-0.04.tgz (20K). + +ciao - Till +-- + _____ ___ _____ +|_ _| / __|_ _| Tillmann Steinbrecher - tst@darmstadt.netsurf.de + | | _ \__ \ | | _ Pager 0050763@telmi.de http://till.home.ml.org + |_|(_)|___/ |_|(_) "Black holes are where God divided by zero." + + +--------------------------------------------------- +To remove yourself from this mailing list send +email to majordomo@hub-wue.franken.de containing +"unsubscribe isdn4linux " in +the message body [-vg] + diff --git a/FAQ/_howto/tcpip_stack_ms.txt b/FAQ/_howto/tcpip_stack_ms.txt new file mode 100644 index 00000000..d1fdcfec --- /dev/null +++ b/FAQ/_howto/tcpip_stack_ms.txt @@ -0,0 +1,82 @@ +Return-Path: POPmail +Return-Path: +Received: from rachael.franken.de by hsun6.wi-inf.uni-essen.de (SMI-8.6/SMI-SVR4) + id WAA09672; Sat, 5 Apr 1997 22:37:34 +0200 +Received: from oops.franken.de by rachael.franken.de with smtp + (Smail3.1.29.1 #8) id m0wDaF3-000oMna; Sat, 5 Apr 97 20:31 MET DST +Received: by oops.franken.de (Linux Smail3.1.29.1 #1) + id m0wDaEr-001IWda; Sat, 5 Apr 97 20:30 MET DST +Received: from hub-wue.franken.de by oops.franken.de with smtp + (Linux Smail3.1.29.1 #1) id m0wDaEo-001IUzE; Sat, 5 Apr 97 20:30 MET DST +Received: from dinet.de by hub-wue.franken.de with smtp + (Smail3.1.29.1 #1) id m0wDaE6-000BmHC; Sat, 5 Apr 97 20:30 MET DST +Received: (from todd@localhost) by dinet.de (8.8.5/8.8.5/DInet-DIS-1) id UAA22630; Sat, 5 Apr 1997 20:29:40 +0200 +From: Torsten Hentschel +Message-Id: <199704051829.UAA22630@dinet.de> +Subject: Re: Windows => Linux => ISDN => WWW Wo gibt es eine Anleitung ? +To: C.Reiser@t-online.de +Date: Sat, 5 Apr 1997 20:29:40 +0200 (MET DST) +Cc: isdn4linux@hub-wue.franken.de +In-Reply-To: from "Karsten Keil" at Apr 5, 97 09:49:58 am +X-NCC-RegID: de.delta +X-Organization: DI Delta Internet GmbH +X-Phone: +49 2932 916 132 +X-Fax: +49 2932 916 232 +X-Mailer: ELM [version 2.4 PL24] +MIME-Version: 1.0 +Content-Transfer-Encoding: quoted-printable +X-MIME-Autoconverted: from 8bit to quoted-printable by dinet.de id UAA22630 +Sender: owner-isdn4linux@hub-wue.franken.de +Precedence: bulk +Content-Type: text/plain; charset=US-ASCII + +> Christian Reiser (C.Reiser@t-online.de) wrote: +> : Wo gibt es Informationen wie man ein Windows 3.11 (Ethernet-)Netzwerk= +=20 +> : (mit Novell-Server) mit Netscape =FCber einen Linux-Server mit ISDN +> : ans WWW anbinden kann. Bevorzugt w=E4re eine Linux-Proxy L=F6sung. +>=20 +> : Hardware-Eckdaten: +> : Netzwerkkarten: 3Com507 +> : 14 Clients: 16 Mb; dx2/50 Dos 6.22; Windows wird aus dem Server +> : gestartet +> : 1 Novell-Server: Novell 3.11 +> : 1 Linux-Server : 16 MB; dx2/50; SUSE 4.4; Kernel 2.0.25; Hisax 1.2;=20 +> : Fritz-Card +> Du brauchst auf den Novell Clients einen TCP/IP Protocol Stack z.B. Nov= +ell +> LAN Workplace, oder einen anderen, der auf die ODI Treiber aufsetzt. +> Ohne den geht garnichts. +> Wenn das laeuft, sollte es genuegend Anleitungen geben, entweder ueber = +Proxy +> oder ueber Masquerading ueber die Linuxbox ins Internet zu kommen. + +Man braucht gar nicht Novell etwas Geld in den Rachen werfen. +Den TCP/IP-Stack kann man von Microsoft fuer Windows 3.11 auch +kostenlos bekommen (und Windows95 hat ihn eingebaut): + +http://www.microsoft.com/kb/softlib/mslfiles/TCP32B.EXE + +Nur eines gibt es zu beachten: Ausser TCP/IP darf kein weiteres +Protokoll durch das Microsoft Netzwerk eingebunden werden. +Denn IPX wuerde sofort mit den Treibern von Novell hapern. + +Ansonsten laeuft das hier bei einem unserer Kunden wunderbar, +in einer sehr aehnlichen Konfiguration. + +Gruesse, + + Torsten Hentschel + +--=20 + http://www.DInet.de/ + /\ von-Siemens-Str. 12=20 + / \ Delta Internet GmbH 59757 Arnsberg + / \ Netzwerkdienst & Vertrieb Tel. +49 2932 91 61 32=20 + /______\ Fax. +49 2932 91 61 91 +--------------------------------------------------- +To remove yourself from this mailing list send +email to majordomo@hub-wue.franken.de containing +"unsubscribe isdn4linux " in +the message body [-vg] + diff --git a/FAQ/_howto/win95_modemd_inf.txt b/FAQ/_howto/win95_modemd_inf.txt new file mode 100644 index 00000000..70e9e665 --- /dev/null +++ b/FAQ/_howto/win95_modemd_inf.txt @@ -0,0 +1,51 @@ +Return-Path: POPmail +Return-Path: +Received: from rachael.franken.de by hsun6.wi-inf.uni-essen.de (SMI-8.6/SMI-SVR4) + id WAA09582; Tue, 15 Apr 1997 22:57:36 +0200 +Received: from oops.franken.de by rachael.franken.de with smtp + (Smail3.1.29.1 #8) id m0wHCfe-000oPka; Tue, 15 Apr 97 20:09 MET DST +Received: by oops.franken.de (Linux Smail3.1.29.1 #1) + id m0wHChM-001IXYa; Tue, 15 Apr 97 20:11 MET DST +Received: from hub-wue.franken.de by oops.franken.de with smtp + (Linux Smail3.1.29.1 #1) id m0wHChI-001IXUE; Tue, 15 Apr 97 20:11 MET DST +Received: from hertz.ikp.physik.th-darmstadt.de by hub-wue.franken.de with smtp + (Smail3.1.29.1 #1) id m0wHCem-000BmHC; Tue, 15 Apr 97 20:08 MET DST +Received: (from bon@localhost) by hertz.ikp.physik.th-darmstadt.de (8.8.3/8.8.3) id UAA00262; Tue, 15 Apr 1997 20:07:43 +0200 +Date: Tue, 15 Apr 1997 20:07:43 +0200 +Message-Id: <199704151807.UAA00262@hertz.ikp.physik.th-darmstadt.de> +From: Uwe Bonnes +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +To: Thomas Haas +Cc: isdn4linux@hub-wue.franken.de +Subject: Re: modem.inf fuer i4l +In-Reply-To: +References: +Sender: owner-isdn4linux@hub-wue.franken.de +Precedence: bulk +Content-Type: text/plain; charset=us-ascii + +>>>>> "Thomas" == Thomas Haas writes: + + Thomas> Hallo Mit NetModem/IP von http://www.tactical-sw.com/ kann ich + Thomas> nun endlich die ttyIxx von Win95 aus uebers Netz nutzen. Cool. + + Thomas> Weiss jemand, wie eine win95-inf-Datei fuer Modems aussehen + Thomas> muss? Ich moechte gerne so eine inf-Datei fuer den + Thomas> i4l-Modem-Emulator (ttyIxx) basteln, oder hat das schon jemand + Thomas> gemacht? + +Vielleicht hilft Dir weiter wie Kevin Wells ein Inf-File fuer ein +Nullmodemadapter geschrieben hat: +http://www.vt.edu:10021/K/kewells/net/ + +Uwe Bonnes bon@elektron.ikp.physik.th-darmstadt.de + +Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt +--------- Tel. 06151 162516 -------- Fax. 06151 164321 ---------- +--------------------------------------------------- +To remove yourself from this mailing list send +email to majordomo@hub-wue.franken.de containing +"unsubscribe isdn4linux " in +the message body [-vg] + diff --git a/FAQ/_howto/xcept.txt b/FAQ/_howto/xcept.txt new file mode 100644 index 00000000..36f16741 --- /dev/null +++ b/FAQ/_howto/xcept.txt @@ -0,0 +1,82 @@ +Return-Path: owner-isdn4linux@hub-wue.franken.de +Received: from hsun6.wi-inf.uni-essen.de by aixrs1.hrz.uni-essen.de (AIX 4.1/UCB 5.64/4.03) + id AA44892; Mon, 10 Mar 1997 19:02:05 +0100 +Received: from rachael.franken.de by hsun6.wi-inf.uni-essen.de (SMI-8.6/SMI-SVR4) + id TAA14192; Mon, 10 Mar 1997 19:03:40 +0100 +Received: from oops.franken.de by rachael.franken.de with smtp + (Smail3.1.29.1 #8) id m0w43xj-000oHda; Mon, 10 Mar 97 13:13 MET +Received: by oops.franken.de (Linux Smail3.1.29.1 #1) + id m0w43vH-001ITva; Mon, 10 Mar 97 13:11 MET +Received: from hub-wue.franken.de by oops.franken.de with smtp + (Linux Smail3.1.29.1 #1) id m0w43vB-001ITuE; Mon, 10 Mar 97 13:11 MET +Received: from ki.comcity.de by hub-wue.franken.de with smtp + (Smail3.1.29.1 #1) id m0w43wO-000BoNC; Mon, 10 Mar 97 13:12 MET +Received: from commgate.local.comcity.de by ki.comcity.de (SMI-8.6/SMI-SVR4) + id OAA13546; Mon, 10 Mar 1997 14:08:01 -0100 +Received: from [194.25.34.206] by commgate.local.comcity.de with ESMTP id S.000357002404 for ,...; Mon, 10 Mar 1997 13:12:39 +0100 +Received: from widor2.comcity.de (vwidor@widor2.comcity.de [192.168.1.2]) by widor1.comcity.de (8.7.5/8.7.3) with SMTP id MAA00192; Mon, 10 Mar 1997 12:52:10 +0100 +Message-Id: <3323F56B.4FEA8D7@rd.comcity.de> +Date: Mon, 10 Mar 1997 12:50:03 +0100 +From: Volker Widor +Organization: - +X-Mailer: Mozilla 3.01Gold (X11; I; Linux 2.0.29 i586) +To: Dimitrios Dimitrakos +Cc: isdn4linux@hub-wue.franken.de +Subject: Re: T-Online BTX +References: <331A14C0.5AFA30E1@wiesbaden.netsurf.de> +Mime-Version: 1.0 +Content-Type: text/plain; charset=us-ascii +Content-Transfer-Encoding: 8bit +Sender: owner-isdn4linux@hub-wue.franken.de +Precedence: bulk + +bei mir leuft XCept-1.1.2. +(allerdings komischerweise nur in SW) +ich habe aber ISDN beim kompilieren von XCept ausgeschaltet. +dann noch in init.cept folgendes: + +--------------------------------------------------------- +hangupstring "~+++~ATH0^M" +connectstring "64000/X.75" +nodialtonestring "NO DIALTONE^M" +nocarrierstring "NO CARRIER^M" +busystring "BUSY^M" +opendevice 9600 "/dev/ttyI2" + +send "AT&F^M" +sleep 1 +send "AT&D2^M" +send "ATQ0^M" +send "ATV1^M" +send "ATS2=255^M" +send "AT&X1^M" +send "AT&E000000^M" #<-- eaz eintragen! +send "ATD01910^M" +wait 10 + +--------------------------------------------------------- + +und schon lueppt das! + +nur eine frage, wo wir gerade dabei sind: +wenn ich den ceptd von einem anderen rechner aus nutzen will, und den +benutzer in users.cept +freigegeben habe, scheitert ceptd mit der fehlermeldung (ueber syslog): + +serverhost ceptd[160]: warning: can't verify hostname: +gethostbyname(clientname) failed +serverhost ceptd[160]: refused connect from name@clienthost + +falls da jemand sagen kann, was man da machen kann, waere ich sehr +dankbar. +(das muss wohl irgendwo im socket.c in ceptd liegen) + +-- + / Volker Widor - Kiewittsholm 6a - D-24107 Ottendorf / + / Tel.: +49 431 583572 Fax: +49 431 583502 / + / E-Mail: vwidor@rd.comcity.de / +--------------------------------------------------- +To remove yourself from this mailing list send +email to majordomo@hub-wue.franken.de containing +"unsubscribe isdn4linux " in +the message body [-vg]