From 29eda36988d6238983f7e5ae8a71e02e627e5f08 Mon Sep 17 00:00:00 2001
From: paul <paul>
Date: Thu, 9 Aug 2001 19:23:53 +0000
Subject: [PATCH] Added note about /dev/isdnctrl vs. /dev/isdn/isdnctrl;
 explained 3rd parm is firmware file when loading firmware.

---
 hisax/hisaxctrl.man.in | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/hisax/hisaxctrl.man.in b/hisax/hisaxctrl.man.in
index f8d5bed0..67bdf236 100644
--- a/hisax/hisaxctrl.man.in
+++ b/hisax/hisaxctrl.man.in
@@ -1,6 +1,6 @@
-.\" $Id: hisaxctrl.man.in,v 1.1 2000/06/20 10:16:16 keil Exp $
+.\" $Id: hisaxctrl.man.in,v 1.2 2001/08/09 19:23:53 paul Exp $
 .\"
-.\" CHECKIN $Date: 2000/06/20 10:16:16 $
+.\" CHECKIN $Date: 2001/08/09 19:23:53 $
 .\"
 .\" Process this file with
 .\" groff -man -Tascii hisaxctrl.1 for ASCII output, or
@@ -18,10 +18,15 @@ is used to setup the HiSax-ISDN device driver.
 All logging-output is sent to the device /dev/isdnctrl. So you can show it
 by executing
 .BR "cat /dev/isdnctrl" .
+.br
+.B NOTE:
+for
+.I devfs
+systems, the program will automatically use /dev/isdn/isdnctrl if available.
 .LP
 The use of
 .I hisaxctrl
-makes sense, if you are using the HiSax driver only.
+only makes sense if you are using the HiSax driver.
 .LP
 .SH OPTIONS
 .TP
@@ -43,9 +48,9 @@ defined for setting the logging-level of the HiSax-ISDN device driver:
 .br
 .BR " 1" " selects generic debugging."
 .br
-.BR 11 " selects layer 1 developement debugging."
+.BR 11 " selects layer 1 development debugging."
 .br
-.BR 13 " selects layer 3 developement debugging."
+.BR 13 " selects layer 3 development debugging."
 .br
 .RE
 .LP
@@ -74,12 +79,18 @@ of the HiSax-ISDN device driver.
 .RE
 .TP
 .I parameter
+If the command is
+.BR 9
+then the parameter is the full pathname to the file containing the firmware.
+
 For debug settings this is an integer representing a bitmask. Every bit in
 this mask switches a debug facility on or off. Depending on the selected 
 category, the following values are defined:
 .LP
 .RS
-.RB With " generic debugging " selected:
+.RB With " generic debugging " selected
+.br
+(command \fB1\fR):
 .LP
 .BR 0x001 " Link-level <--> hardware-level communication"
 .br
@@ -106,7 +117,9 @@ category, the following values are defined:
 .BR 0x800 " More debug in callc.c (not for normal use)"
 .br
 .LP
-.RB With " layer 1 developement debugging " selected:
+.RB With " layer 1 development debugging " selected
+.br
+(command \fB11\fR):
 .LP
 .BR 0x001 " Warnings (default: on)"
 .br
@@ -123,7 +136,9 @@ category, the following values are defined:
 .BR 0x040 " D-Channel LAPD frame types"
 .br
 .LP
-.RB With " layer 3 developement debugging " selected:
+.RB With " layer 3 development debugging " selected
+.br
+(command \fB13\fR):
 .LP
 .BR 0x001 " Warnings (default: on)"
 .br