retronetworking
/
freeswitch
13
0
Fork 0
Code Pull Requests Releases Activity
freeswitch/libs/spandsp/src/make_at_dictionary.c

671 lines
33 KiB
C
Raw Blame History

/*
* SpanDSP - a series of DSP components for telephony
*
* make_at_dictionary.c - Generate a trie based dictionary for the AT
* commands supported by the AT interpreter.
*
* Written by Steve Underwood <steveu@coppice.org>
*
* Copyright (C) 2006 Steve Underwood
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <inttypes.h>
#include <stdlib.h>
#include <stdio.h>
#include <fcntl.h>
#include <string.h>
#include <assert.h>
const char *wordlist[] =
{
" ", /* Dummy to absorb spaces in commands */
"&C", /* V.250 6.2.8 - Circuit 109 (received line signal detector), behaviour */
"&D", /* V.250 6.2.9 - Circuit 108 (data terminal ready) behaviour */
"&F", /* V.250 6.1.2 - Set to factory-defined configuration */
"+A8A", /* V.251 6.3 - V.8 calling tone indication */
"+A8C", /* V.251 6.2 - V.8 answer signal indication */
"+A8E", /* V.251 5.1 - V.8 and V.8bis operation controls */
"+A8I", /* V.251 6.1 - V.8 CI signal indication */
"+A8J", /* V.251 6.4 - V.8 negotiation complete */
"+A8M", /* V.251 5.2 - Send V.8 menu signals */
"+A8R", /* V.251 6.6 - V.8bis signal and message reporting */
"+A8T", /* V.251 5.3 - Send V.8bis signal and/or message(s) */
"+ASTO", /* V.250 6.3.15 - Store telephone number */
"+CAAP", /* 3GPP TS 27.007 7.25 - Automatic answer for eMLPP Service */
"+CACM", /* 3GPP TS 27.007 8.25 - Accumulated call meter */
"+CACSP", /* 3GPP TS 27.007 11.1.7 - Voice Group or Voice Broadcast Call State Attribute Presentation */
"+CAD", /* IS-99 5.6.3 - Query analogue or digital service */
"+CAEMLPP", /* 3GPP TS 27.007 7.22 - eMLPP Priority Registration and Interrogation */
"+CAHLD", /* 3GPP TS 27.007 11.1.3 - Leave an ongoing Voice Group or Voice Broadcast Call */
"+CAJOIN", /* 3GPP TS 27.007 11.1.1 - Accept an incoming Voice Group or Voice Broadcast Call */
"+CALA", /* 3GPP TS 27.007 8.16 - Alarm */
"+CALCC", /* 3GPP TS 27.007 11.1.6 - List current Voice Group and Voice Broadcast Calls */
"+CALD", /* 3GPP TS 27.007 8.38 - Delete alar m */
"+CALM", /* 3GPP TS 27.007 8.20 - Alert sound mode */
"+CAMM", /* 3GPP TS 27.007 8.26 - Accumulated call meter maximum */
"+CANCHEV", /* 3GPP TS 27.007 11.1.8 - NCH Support Indication */
"+CAOC", /* 3GPP TS 27.007 7.16 - Advice of Charge */
"+CAPD", /* 3GPP TS 27.007 8.39 - Postpone or dismiss an alarm */
"+CAPTT", /* 3GPP TS 27.007 11.1.4 - Talker Access for Voice Group Call */
"+CAREJ", /* 3GPP TS 27.007 11.1.2 - Reject an incoming Voice Group or Voice Broadcast Call */
"+CAULEV", /* 3GPP TS 27.007 11.1.5 - Voice Group Call Uplink Status Presentation */
"+CBC", /* 3GPP TS 27.007 8.4 - Battery charge */
"+CBCS", /* 3GPP TS 27.007 11.3.2 - VBS subscriptions and GId status */
"+CBIP", /* IS-99 5.6 - Base station IP address */
"+CBST", /* 3GPP TS 27.007 6.7 - Select bearer service type */
"+CCFC", /* 3GPP TS 27.007 7.11 - Call forwarding number and conditions */
"+CCLK", /* 3GPP TS 27.007 8.15 - Clock */
"+CCS", /* IS-135 4.1.22 - Compression status */
"+CCUG", /* 3GPP TS 27.007 7.10 - Closed user group */
"+CCWA", /* 3GPP TS 27.007 7.12 - Call waiting */
"+CCWE", /* 3GPP TS 27.007 8.28 - Call Meter maximum event */
"+CDIP", /* 3GPP TS 27.007 7.9 - Called line identification presentation */
"+CDIS", /* 3GPP TS 27.007 8.8 - Display control */
"+CDV", /* IS-99 5.6 - Dial command for voice call */
"+CEER", /* 3GPP TS 27.007 6.10 - Extended error report */
"+CESP", /* GSM07.05 3.2.4 - Enter SMS block mode protocol */
"+CFCS", /* 3GPP TS 27.007 7.24 - Fast call setup conditions */
"+CFG", /* IS-99 5.6 - Configuration string */
"+CFUN", /* 3GPP TS 27.007 8.2 - Set phone functionality */
"+CGACT", /* 3GPP TS 27.007 10.1.10 - PDP context activate or deactivate */
"+CGANS", /* 3GPP TS 27.007 10.1.16 - Manual response to a network request for PDP context activation */
"+CGATT", /* 3GPP TS 27.007 10.1.9 - PS attach or detach */
"+CGAUTO", /* 3GPP TS 27.007 10.1.15 - Automatic response to a network request for PDP context activation */
"+CGCAP", /* IS-99 5.6 - Request complete capabilities list */
"+CGCLASS", /* 3GPP TS 27.007 10.1.17 - GPRS mobile station class (GPRS only) */
"+CGCLOSP", /* 3GPP TS 27.007 10.1.13 - Configure local octet stream PAD parameters (Obsolete) */
"+CGCLPAD", /* 3GPP TS 27.007 10.1.12 - Configure local triple-X PAD parameters (GPRS only) (Obsolete) */
"+CGCMOD", /* 3GPP TS 27.007 10.1.11 - PDP Context Modify */
"+CGCS", /* 3GPP TS 27.007 11.3.1 - VGCS subscriptions and GId status */
"+CGDATA", /* 3GPP TS 27.007 10.1.12 - Enter data state */
"+CGDCONT", /* 3GPP TS 27.007 10.1.1 - Define PDP Context */
"+CGDSCONT",/* 3GPP TS 27.007 10.1.2 - Define Secondary PDP Context */
"+CGEQMIN", /* 3GPP TS 27.007 10.1.7 - 3G Quality of Service Profile (Minimum acceptable) */
"+CGEQNEG", /* 3GPP TS 27.007 10.1.8 - 3G Quality of Service Profile (Negotiated) */
"+CGEQREQ", /* 3GPP TS 27.007 10.1.6 - 3G Quality of Service Profile (Requested) */
"+CGEREP", /* 3GPP TS 27.007 10.1.18 - Packet Domain event reporting */
"+CGMI", /* 3GPP TS 27.007 5.1 - Request manufacturer identification */
"+CGMM", /* 3GPP TS 27.007 5.2 - Request model identification */
"+CGMR", /* 3GPP TS 27.007 5.3 - Request revision identification */
"+CGOI", /* IS-99 5.6 - Request global object identification */
"+CGPADDR", /* 3GPP TS 27.007 10.1.14 - Show PDP address */
"+CGQMIN", /* 3GPP TS 27.007 10.1.5 - Quality of Service Profile (Minimum acceptable) */
"+CGQREQ", /* 3GPP TS 27.007 10.1.4 - Quality of Service Profile (Requested) */
"+CGREG", /* 3GPP TS 27.007 10.1.19 - GPRS network registration status */
"+CGSMS", /* 3GPP TS 27.007 10.1.20 - Select service for MO SMS messages */
"+CGSN", /* 3GPP TS 27.007 5.4 - Request product serial number identification */
"+CGTFT", /* 3GPP TS 27.007 10.1.3 - Traffic Flow Template */
"+CHLD", /* 3GPP TS 27.007 7.13 - Call related supplementary services */
"+CHSA", /* 3GPP TS 27.007 6.18 - HSCSD non-transparent asymmetry configuration */
"+CHSC", /* 3GPP TS 27.007 6.15 - HSCSD current call parameters */
"+CHSD", /* 3GPP TS 27.007 6.12 - HSCSD device parameters */
"+CHSN", /* 3GPP TS 27.007 6.14 - HSCSD non-transparent call configuration */
"+CHSR", /* 3GPP TS 27.007 6.16 - HSCSD parameters report */
"+CHST", /* 3GPP TS 27.007 6.13 - HSCSD transparent call configuration */
"+CHSU", /* 3GPP TS 27.007 6.17 - HSCSD automatic user initiated upgrading */
"+CHUP", /* 3GPP TS 27.007 6.5 - Hangup call */
"+CHV", /* IS-99 5.6 - Hang-up voice */
"+CIMI", /* 3GPP TS 27.007 5.6 - Request international mobile subscriber identity */
"+CIND", /* 3GPP TS 27.007 8.9 - Indicator control */
"+CIT", /* IS-99 5.6 - Command state inactivity timer */
"+CKPD", /* 3GPP TS 27.007 8.7 - Keypad control */
"+CLAC", /* 3GPP TS 27.007 8.37 - List all available AT commands */
"+CLAE", /* 3GPP TS 27.007 8.31 - Language Event */
"+CLAN", /* 3GPP TS 27.007 8.30 - Set Language */
"+CLCC", /* 3GPP TS 27.007 7.18 - List current calls */
"+CLCK", /* 3GPP TS 27.007 7.4 - Facility lock */
"+CLIP", /* 3GPP TS 27.007 7.6 - Calling line identification presentation */
"+CLIR", /* 3GPP TS 27.007 7.7 - Calling line identification restriction */
"+CLVL", /* 3GPP TS 27.007 8.23 - Loudspeaker volume level */
"+CMAR", /* 3GPP TS 27.007 8.36 - Master reset */
"+CMEC", /* 3GPP TS 27.007 8.6 - Mobile termination control mode */
"+CMEE", /* GSM07.07 9.1 - Report mobile equipment error */
"+CMER", /* 3GPP TS 27.007 8.10 - Mobile termination event reporting */
"+CMGC", /* GSM07.05 3.5.5/4.5 - Send command */
"+CMGD", /* GSM07.05 3.5.4 - Delete message */
"+CMGF", /* GSM07.05 3.2.3 - Message Format */
"+CMGL", /* GSM07.05 3.4.2/4.1 - List messages */
"+CMGR", /* GSM07.05 3.4.3/4.2 - Read message */
"+CMGS", /* GSM07.05 3.5.1/4.3 - Send message */
"+CMGW", /* GSM07.05 3.5.3/4.4 - Write message to memory */
"+CMIP", /* IS-99 5.6 - Mobile station IP address */
"+CMM", /* IS-135 4.1.23 - Menu map */
"+CMMS", /* GSM07.05 3.5.6 - More messages to send */
"+CMOD", /* 3GPP TS 27.007 6.4 - Call mode */
"+CMSS", /* GSM07.05 3.5.2/4.7 - Send message from storage */
"+CMUT", /* 3GPP TS 27.007 8.24 - Mute control */
"+CMUX", /* 3GPP TS 27.007 5.7 - Multiplexing mode */
"+CNMA", /* GSM07.05 3.4.4/4.6 - New message acknowledgement to terminal adapter */
"+CNMI", /* GSM07.05 3.4.1 - New message indications to terminal equipment */
"+CNUM", /* 3GPP TS 27.007 7.1 - Subscriber number */
"+COLP", /* 3GPP TS 27.007 7.8 - Connected line identification presentation */
"+COPN", /* 3GPP TS 27.007 7.21 - Read operator names */
"+COPS", /* 3GPP TS 27.007 7.3 - PLMN selection */
"+COS", /* IS-135 4.1.24 - Originating service */
"+COTDI", /* 3GPP TS 27.007 11.1.9 - Originator to Dispatcher Information */
"+CPAS", /* 3GPP TS 27.007 8.1 - Phone activity status */
"+CPBF", /* 3GPP TS 27.007 8.13 - Find phonebook entries */
"+CPBR", /* 3GPP TS 27.007 8.12 - Read phonebook entries */
"+CPBS", /* 3GPP TS 27.007 8.11 - Select phonebook memory storage */
"+CPBW", /* 3GPP TS 27.007 8.14 - Write phonebook entry */
"+CPIN", /* 3GPP TS 27.007 8.3 - Enter PIN */
"+CPLS", /* 3GPP TS 27.007 7.20 - Selection of preferred PLMN list */
"+CPMS", /* GSM07.05 3.2.2 - Preferred message storage */
"+CPOL", /* 3GPP TS 27.007 7.19 - Preferred PLMN list */
"+CPPS", /* 3GPP TS 27.007 7.23 - eMLPP subscriptions */
"+CPROT", /* 3GPP TS 27.007 8.42 - Enter protocol mode */
"+CPUC", /* 3GPP TS 27.007 8.27 - Price per unit and currency table */
"+CPWC", /* 3GPP TS 27.007 8.29 - Power class */
"+CPWD", /* 3GPP TS 27.007 7.5 - Change password */
"+CQD", /* IS-135 4.1.25 - Query disconnect timer */
"+CR", /* 3GPP TS 27.007 6.9 - Service reporting control */
"+CRC", /* 3GPP TS 27.007 6.11 - Cellular result codes */
"+CREG", /* 3GPP TS 27.007 7.2 - Network registration */
"+CRES", /* GSM07.05 3.3.6 - Restore Settings */
"+CRLP", /* 3GPP TS 27.007 6.8 - Radio link protocol */
"+CRM", /* IS-99 5.6 - Set rm interface protocol */
"+CRMC", /* 3GPP TS 27.007 8.34 - Ring Melody Control */
"+CRMP", /* 3GPP TS 27.007 8.35 - Ring Melody Playback */
"+CRSL", /* 3GPP TS 27.007 8.21 - Ringer sound level */
"+CRSM", /* 3GPP TS 27.007 8.18 - Restricted SIM access */
"+CSAS", /* GSM07.05 3.3.5 - Save settings */
"+CSCA", /* GSM07.05 3.3.1 - Service centre address */
"+CSCB", /* GSM07.05 3.3.4 - Select cell broadcast message types */
"+CSCC", /* 3GPP TS 27.007 8.19 - Secure control command */
"+CSCS", /* 3GPP TS 27.007 5.5 - Select TE character set */
"+CSDF", /* 3GPP TS 27.007 6.22 - Settings date format */
"+CSDH", /* GSM07.05 3.3.3 - Show text mode parameters */
"+CSGT", /* 3GPP TS 27.007 8.32 - Set Greeting Text */
"+CSIL", /* 3GPP TS 27.007 6.23 - Silence Command */
"+CSIM", /* 3GPP TS 27.007 8.17 - Generic SIM access */
"+CSMP", /* GSM07.05 3.3.2 - Set text mode parameters */
"+CSMS", /* GSM07.05 3.2.1 - Select Message Service */
"+CSNS", /* 3GPP TS 27.007 6.19 - Single numbering scheme */
"+CSQ", /* 3GPP TS 27.007 8.5 - Signal quality */
"+CSS", /* IS-135 4.1.28 - Serving system identification */
"+CSSN", /* 3GPP TS 27.007 7.17 - Supplementary service notifications */
"+CSTA", /* 3GPP TS 27.007 6.1 - Select type of address */
"+CSTF", /* 3GPP TS 27.007 6.24 - Settings time format */
"+CSVM", /* 3GPP TS 27.007 8.33 - Set Voice Mail Number */
"+CTA", /* IS-135 4.1.29 - MT-Terminated async. Data calls */
"+CTF", /* IS-135 4.1.30 - MT-Terminated FAX calls */
"+CTFR", /* 3GPP TS 27.007 7.14 - Call deflection */
"+CTZR", /* 3GPP TS 27.007 8.41 - Time Zone Reporting */
"+CTZU", /* 3GPP TS 27.007 8.40 - Automatic Time Zone Update */
"+CUSD", /* 3GPP TS 27.007 7.15 - Unstructured supplementary service data */
"+CUUS1", /* 3GPP TS 27.007 7.26 - User to User Signalling Service 1 */
"+CV120", /* 3GPP TS 27.007 6.21 - V.120 rate adaption protocol */
"+CVHU", /* 3GPP TS 27.007 6.20 - Voice Hangup Control */
"+CVIB", /* 3GPP TS 27.007 8.22 - Vibrator mode */
"+CXT", /* IS-99 5.6 - Cellular extension */
"+DR", /* V.250 6.6.2 - Data compression reporting */
"+DS", /* V.250 6.6.1 - Data compression */
"+DS44", /* V.250 6.6.2 - V.44 data compression */
"+EB", /* V.250 6.5.2 - Break handling in error control operation */
"+EFCS", /* V.250 6.5.4 - 32-bit frame check sequence */
"+EFRAM", /* V.250 6.5.8 - Frame length */
"+ER", /* V.250 6.5.5 - Error control reporting */
"+ES", /* V.250 6.5.1 - Error control selection */
"+ESA", /* V.80 8.2 - Synchronous access mode configuration */
"+ESR", /* V.250 6.5.3 - Selective repeat */
"+ETBM", /* V.250 6.5.6 - Call termination buffer management */
"+EWIND", /* V.250 6.5.7 - Window size */
"+F34", /* T.31 B.6.1 - Initial V.34 rate controls for FAX */
"+FAA", /* T.32 8.5.2.5 - Adaptive Answer parameter */
"+FAP", /* T.32 8.5.1.12 - Addressing and polling capabilities parameter */
"+FAR", /* T.31 8.5.1 - Adaptive reception control */
"+FBO", /* T.32 8.5.3.4 - Phase C data bit order */
"+FBS", /* T.32 8.5.3.2 - Buffer Size, read only parameter */
"+FBU", /* T.32 8.5.1.10 - HDLC Frame Reporting parameter */
"+FCC", /* T.32 8.5.1.1 - DCE capabilities parameters */
"+FCL", /* T.31 8.5.2 - Carrier loss timeout */
"+FCLASS", /* T.31 8.2 - Capabilities identification and control */
"+FCQ", /* T.32 8.5.2.3 - Copy quality checking parameter */
"+FCR", /* T.32 8.5.1.9 - Capability to receive parameter */
"+FCS", /* T.32 8.5.1.3 - Current Session Results parameters */
"+FCT", /* T.32 8.5.2.6 - DTE phase C timeout parameter */
"+FDD", /* T.31 8.5.3 - Double escape character replacement */
"+FDR", /* T.32 8.3.4 - Data reception command */
"+FDT", /* T.32 8.3.3 - Data transmission command */
"+FEA", /* T.32 8.5.3.5 - Phase C received EOL alignment parameter */
"+FFC", /* T.32 8.5.3.6 - Format conversion parameter */
"+FFD", /* T.32 8.5.1.14 - File diagnostic message parameter */
"+FHS", /* T.32 8.5.2.7 - Call termination status parameter */
"+FIE", /* T.32 8.5.2.1 - Procedure interrupt enable parameter */
"+FIP", /* T.32 8.3.6 - Initialize facsimile parameters */
"+FIS", /* T.32 8.5.1.2 - Current session parameters */
"+FIT", /* T.31 8.5.4 - DTE inactivity timeout */
"+FKS", /* T.32 8.3.5 - Session termination command */
"+FLI", /* T.32 8.5.1.5 - Local ID string parameter, TSI or CSI */
"+FLO", /* T.31 says to implement something similar to +IFC */
"+FLP", /* T.32 8.5.1.7 - Indicate document to poll parameter */
"+FMI", /* T.31 says to duplicate +GMI */
"+FMM", /* T.31 says to duplicate +GMM */
"+FMR", /* T.31 says to duplicate +GMR */
"+FMS", /* T.32 8.5.2.9 - Minimum phase C speed parameter */
"+FND", /* T.32 8.5.2.10 - Non-Standard Message Data Indication parameter */
"+FNR", /* T.32 8.5.1.11 - Negotiation message reporting control parameters */
"+FNS", /* T.32 8.5.1.6 - Non-Standard Frame FIF parameter */
"+FPA", /* T.32 8.5.1.13 - Selective polling address parameter */
"+FPI", /* T.32 8.5.1.5 - Local Polling ID String parameter */
"+FPP", /* T.32 8.5.3 - Facsimile packet protocol */
"+FPR", /* T.31 says to implement something similar to +IPR */
"+FPS", /* T.32 8.5.2.2 - Page Status parameter */
"+FPW", /* T.32 8.5.1.13 - PassWord parameter (Sending or Polling) */
"+FRH", /* T.31 8.3.6 - HDLC receive */
"+FRM", /* T.31 8.3.4 - Facsimile receive */
"+FRQ", /* T.32 8.5.2.4 - Receive Quality Thresholds parameters */
"+FRS", /* T.31 8.3.2 - Receive silence */
"+FRY", /* T.32 8.5.2.8 - ECM Retry Value parameter */
"+FSA", /* T.32 8.5.1.13 - Subaddress parameter */
"+FSP", /* T.32 8.5.1.8 - Request to poll parameter */
"+FTH", /* T.31 8.3.5 - HDLC transmit */
"+FTM", /* T.31 8.3.3 - Facsimile transmit */
"+FTS", /* T.31 8.3.1 - Transmit silence */
"+GCAP", /* V.250 6.1.9 - Request complete capabilities list */
"+GCI", /* V.250 6.1.10 - Country of installation, */
"+GMI", /* V.250 6.1.4 - Request manufacturer identification */
"+GMM", /* V.250 6.1.5 - Request model identification */
"+GMR", /* V.250 6.1.6 - Request revision identification */
"+GOI", /* V.250 6.1.8 - Request global object identification */
"+GSN", /* V.250 6.1.7 - Request product serial number identification */
"+IBC", /* V.80 7.9 - Control of in-band control */
"+IBM", /* V.80 7.10 - In-band MARK idle reporting control */
"+ICF", /* V.250 6.2.11 - DTE-DCE character framing */
"+ICLOK", /* V.250 6.2.14 - Select sync transmit clock source */
"+IDSR", /* V.250 6.2.16 - Select data set ready option */
"+IFC", /* V.250 6.2.12 - DTE-DCE local flow control */
"+ILRR", /* V.250 6.2.13 - DTE-DCE local rate reporting */
"+ILSD", /* V.250 6.2.15 - Select long space disconnect option */
"+IPR", /* V.250 6.2.10 - Fixed DTE rate */
"+IRTS", /* V.250 6.2.17 - Select synchronous mode RTS option */
"+ITF", /* V.80 8.4 - Transmit flow control thresholds */
"+MA", /* V.250 6.4.2 - Modulation automode control */
"+MR", /* V.250 6.4.3 - Modulation reporting control */
"+MS", /* V.250 6.4.1 - Modulation selection */
"+MSC", /* V.250 6.4.8 - Seamless rate change enable */
"+MV18AM", /* V.250 6.4.6 - V.18 answering message editing */
"+MV18P", /* V.250 6.4.7 - Order of probes */
"+MV18R", /* V.250 6.4.5 - V.18 reporting control */
"+MV18S", /* V.250 6.4.4 - V.18 selection */
"+PCW", /* V.250 6.8.1 - Call waiting enable (V.92 DCE) */
"+PIG", /* V.250 6.8.5 - PCM upstream ignore */
"+PMH", /* V.250 6.8.2 - Modem on hold enable */
"+PMHF", /* V.250 6.8.6 - V.92 Modem on hold hook flash */
"+PMHR", /* V.250 6.8.4 - Initiate modem on hold */
"+PMHT", /* V.250 6.8.3 - Modem on hold timer */
"+PQC", /* V.250 6.8.7 - V.92 Phase 1 and Phase 2 Control */
"+PSS", /* V.250 6.8.8 - V.92 Use Short Sequence */
"+SAC", /* V.252 3.4 - Audio transmit configuration */
"+SAM", /* V.252 3.5 - Audio receive mode */
"+SAR", /* V.252 5.3 - Audio receive channel indication */
"+SARR", /* V.252 3.9 - Audio indication reporting */
"+SAT", /* V.252 5.4 - Audio transmit channel indication */
"+SCRR", /* V.252 3.11 - Capabilities indication reporting */
"+SDC", /* V.252 3.3 - Data configuration */
"+SDI", /* V.252 5.2 - Data channel identification */
"+SDR", /* V.252 3.8 - Data indication reporting */
"+SRSC", /* V.252 5.1.2 - Remote terminal simultaneous capability indication */
"+STC", /* V.252 3.1 - Terminal configuration */
"+STH", /* V.252 3.2 - Close logical channel */
"+SVC", /* V.252 3.6 - Video transmit configuration */
"+SVM", /* V.252 3.7 - Video receive mode */
"+SVR", /* V.252 5.5 - Video receive channel indication */
"+SVRR", /* V.252 3.10 - Video indication reporting */
"+SVT", /* V.252 5.6 - Video transmit channel indication */
"+TADR", /* V.250 6.7.2.9 - Local V.54 address */
"+TAL", /* V.250 6.7.2.15 - Local analogue loop */
"+TALS", /* V.250 6.7.2.6 - Analogue loop status */
"+TDLS", /* V.250 6.7.2.7 - Local digital loop status */
"+TE140", /* V.250 6.7.2.1 - Enable ckt 140 */
"+TE141", /* V.250 6.7.2.2 - Enable ckt 141 */
"+TEPAL", /* V.250 6.7.2.5 - Enable front panel analogue loop */
"+TEPDL", /* V.250 6.7.2.4 - Enable front panel RDL */
"+TERDL", /* V.250 6.7.2.3 - Enable RDL from remote */
"+TLDL", /* V.250 6.7.2.13 - Local digital loop */
"+TMO", /* V.250 6.9 - V.59 command */
"+TMODE", /* V.250 6.7.2.10 - Set V.54 mode */
"+TNUM", /* V.250 6.7.2.12 - Errored bit and block counts */
"+TRDL", /* V.250 6.7.2.14 - Request remote digital loop */
"+TRDLS", /* V.250 6.7.2.8 - Remote digital loop status */
"+TRES", /* V.250 6.7.2.17 - Self test result */
"+TSELF", /* V.250 6.7.2.16 - Self test */
"+TTER", /* V.250 6.7.2.11 - Test error rate */
"+VAC", /* V.252 4.1 - Set audio code */
"+VACR", /* V.252 6.1 - Audio code report */
"+VBT", /* 3GPP TS 27.007 C.2.2 - Buffer threshold setting */
"+VCID", /* V.253 9.2.3 - Caller ID service */
"+VCIDR", /* V.252 6.2 - Caller ID report */
"+VDID", /* V.253 9.2.4 - DID service */
"+VDIDR", /* V.252 6.2 - DID report */
"+VDR", /* V.253 10.3.1 - Distinctive ring (ring cadence reporting) */
"+VDT", /* V.253 10.3.2 - Control tone cadence reporting */
"+VDX", /* V.253 10.5.6 - Speakerphone duplex mode */
"+VEM", /* V.253 10.5.7 - Deliver event reports */
"+VGM", /* V.253 10.5.2 - Microphone gain */
"+VGR", /* V.253 10.2.1 - Receive gain selection */
"+VGS", /* V.253 10.5.3 - Speaker gain */
"+VGT", /* V.253 10.2.2 - Volume selection */
"+VHC", /* V.252 4.12 - Telephony port hook control */
"+VIP", /* V.253 10.1.1 - Initialize voice parameters */
"+VIT", /* V.253 10.2.3 - DTE/DCE inactivity timer */
"+VLS", /* V.253 10.2.4 - Analogue source/destination selection */
"+VNH", /* V.253 9.2.5 - Automatic hangup control */
"+VPH", /* V.252 4.11 - Phone hookswitch status */
"+VPP", /* V.253 10.4.2 - Voice packet protocol */
"+VPR", /* IS-101 10.4.3 - Select DTE/DCE interface rate */
"+VRA", /* V.253 10.2.5 - Ringing tone goes away timer */
"+VRID", /* Extension - Find the originating and destination numbers */
"+VRL", /* V.253 10.1.2 - Ring local phone */
"+VRN", /* V.253 10.2.6 - Ringing tone never appeared timer */
"+VRX", /* V.253 10.1.3 - Voice receive state */
"+VSD", /* V.253 10.2.7 - Silence detection (QUIET and SILENCE) */
"+VSID", /* Extension - Set the originating number */
"+VSM", /* V.253 10.2.8 - Compression method selection */
"+VSP", /* V.253 10.5.1 - Voice speakerphone state */
"+VTA", /* V.253 10.5.4 - Train acoustic echo-canceller */
"+VTD", /* V.253 10.2.9 - Beep tone duration timer */
"+VTER", /* V.252 6.4 - Simple telephony event report */
"+VTH", /* V.253 10.5.5 - Train line echo-canceller */
"+VTR", /* V.253 10.1.4 - Voice duplex state */
"+VTS", /* V.253 10.1.5 - DTMF and tone generation in voice */
"+VTX", /* V.253 10.1.6 - Transmit data state */
"+VXT", /* IS-101 10.1.5 - Translate voice data */
"+W", /* TIA-678 5.2.4.1 - Compliance indication */
"+WBAG", /* TIA-678 C.5.6 Bias modem audio gain */
"+WCDA", /* TIA-678 B.3.2.5 Display data link address */
"+WCHG", /* TIA-678 B.3.2.4 Display battery charging status */
"+WCID", /* TIA-678 B.3.2.1 Display system ID (operator) */
"+WCLK", /* TIA-678 B.3.2.3 Lock/unlock DCE */
"+WCPN", /* TIA-678 B.3.2.2 Set personal identification number */
"+WCXF", /* TIA-678 B.3.2.6 Display supported annex B commands */
"+WDAC", /* TIA-678 C.5.1 Data over analogue cellular command query */
"+WDIR", /* TIA-678 C.5.8 Phone number directory selection */
"+WECR", /* TIA-678 C.5.3 Enable cellular result codes */
"+WFON", /* TIA-678 C.5.5 Phone specification */
"+WKPD", /* TIA-678 C.5.7 Keypad emulation */
"+WPBA", /* TIA-678 C.5.9 Phone battery query */
"+WPTH", /* TIA-678 C.5.10 Call path */
"+WRLK", /* TIA-678 C.5.4 Roam lockout */
"+WS45", /* TIA-678 5.2.4.2 DTE-side stack selection */
"+WS46", /* 3GPP TS 27.007 5.9 - PCCA STD-101 [17] select wireless network */
"+WS50", /* TIA-678 B.3.1.1 Normalized signal strength */
"+WS51", /* TIA-678 B.3.1.2 Carrier detect signal threshold */
"+WS52", /* TIA-678 B.3.1.3 Normalized battery level */
"+WS53", /* TIA-678 B.3.1.4 Normalized channel quality */
"+WS54", /* TIA-678 B.3.1.5 Carrier detect channel quality threshold */
"+WS57", /* TIA-678 B.3.1.7 Antenna preference */
"+WS58", /* TIA-678 B.3.1.8 Idle time-out value */
"+WSTL", /* TIA-678 C.5.2 Call session time limit */
";", /* Dummy to absorb semi-colon delimiters in commands */
"A", /* V.250 6.3.5 - Answer */
"D", /* V.250 6.3.1 - Dial */
"E", /* V.250 6.2.4 - Command echo */
"H", /* V.250 6.3.6 - Hook control */
"I", /* V.250 6.1.3 - Request identification information */
"L", /* V.250 6.3.13 - Monitor speaker loudness */
"M", /* V.250 6.3.14 - Monitor speaker mode */
"O", /* V.250 6.3.7 - Return to online data state */
"P", /* V.250 6.3.3 - Select pulse dialling (command) */
"Q", /* V.250 6.2.5 - Result code suppression */
"S0", /* V.250 6.3.8 - Automatic answer */
"S10", /* V.250 6.3.12 - Automatic disconnect delay */
"S3", /* V.250 6.2.1 - Command line termination character */
"S4", /* V.250 6.2.2 - Response formatting character */
"S5", /* V.250 6.2.3 - Command line editing character */
"S6", /* V.250 6.3.9 - Pause before blind dialling */
"S7", /* V.250 6.3.10 - Connection completion timeout */
"S8", /* V.250 6.3.11 - Comma dial modifier time */
"T", /* V.250 6.3.2 - Select tone dialling (command) */
"V", /* V.250 6.2.6 - DCE response format */
"X", /* V.250 6.2.7 - Result code selection and call progress monitoring control */
"Z", /* V.250 6.1.1 - Reset to default configuration */
NULL
};
int packed_ptr = 0;
short int packed_trie[30000];
#define ALPHABET_SIZE 128
typedef struct trie_node_s
{
int first;
int last;
int node_no;
int entry;
/* Array of pointers to children */
struct trie_node_s *child_list[ALPHABET_SIZE];
} trie_node_t;
typedef struct
{
int entries;
/* The root of the trie */
trie_node_t *root;
} trie_t;
static trie_node_t *trie_node_create(void)
{
trie_node_t *s;
if ((s = (trie_node_t *) malloc(sizeof(*s))))
{
memset(s, 0, sizeof(*s));
s->first = ALPHABET_SIZE - 1;
}
return s;
}
/*- End of function --------------------------------------------------------*/
static trie_t *trie_create(void)
{
trie_t *s;
if ((s = (trie_t *) malloc(sizeof(*s))))
{
memset(s, 0, sizeof(*s));
s->root = trie_node_create();
}
return s;
}
/*- End of function --------------------------------------------------------*/
static void trie_recursive_add_node_numbers(trie_node_t *t)
{
int index;
if (t)
{
if (t->first <= t->last)
{
t->node_no = packed_ptr + 1;
packed_ptr += (t->last - t->first + 1 + 3);
for (index = 0; index < ALPHABET_SIZE; index++)
trie_recursive_add_node_numbers(t->child_list[index]);
}
else
{
t->node_no = packed_ptr + 1;
packed_ptr += 3;
}
}
}
/*- End of function --------------------------------------------------------*/
static void trie_recursive_build_packed_trie(trie_node_t *t)
{
int i;
if (t)
{
if (t->first <= t->last)
{
packed_trie[packed_ptr++] = t->first;
packed_trie[packed_ptr++] = t->last;
packed_trie[packed_ptr++] = t->entry;
for (i = t->first; i <= t->last; i++)
packed_trie[packed_ptr++] = (t->child_list[i]) ? t->child_list[i]->node_no : 0;
for (i = t->first; i <= t->last; i++)
trie_recursive_build_packed_trie(t->child_list[i]);
}
else
{
packed_trie[packed_ptr++] = 1;
packed_trie[packed_ptr++] = 0;
packed_trie[packed_ptr++] = t->entry;
}
}
}
/*- End of function --------------------------------------------------------*/
static void trie_add(trie_t *s, const char *u, size_t len)
{
size_t i;
int index;
trie_node_t *t;
s->entries++;
/* Loop over the length of the string to add and traverse the trie... */
for (t = s->root, i = 0; i < len; i++)
{
/* The character in u we are processing... */
index = (unsigned char) u[i];
/* Is there a child node for this character? */
if (t->child_list[index] == NULL)
{
if ((t->child_list[index] = trie_node_create()) == NULL)
exit(2);
if (index < t->first)
t->first = index;
if (index > t->last)
t->last = index;
}
/* Move to the new node... and loop */
t = t->child_list[index];
}
t->entry = s->entries;
}
/*- End of function --------------------------------------------------------*/
static void dump_trie(void)
{
int i;
printf("\nstatic const at_cmd_service_t at_commands[] =\n{\n");
for (i = 0; wordlist[i]; i++)
{
switch (wordlist[i][0])
{
case ' ':
case ';':
printf(" at_cmd_dummy,\n");
break;
case '+':
printf(" at_cmd_plus_%s,\n", wordlist[i] + 1);
break;
case '&':
printf(" at_cmd_amp_%s,\n", wordlist[i] + 1);
break;
default:
printf(" at_cmd_%s,\n", wordlist[i]);
break;
}
}
printf("};\n");
printf("\nstatic const uint16_t command_trie[] =\n{");
for (i = 0; i < packed_ptr; i++)
{
if ((i & 7) == 0)
printf("\n ");
printf("0x%04X, ", packed_trie[i]);
}
printf("\n};\n");
printf("\n#define COMMAND_TRIE_LEN %d\n", packed_ptr);
}
/*- End of function --------------------------------------------------------*/
static void trie_recursive_free(trie_node_t *t)
{
int i;
if (t)
{
if (t->first <= t->last)
{
for (i = t->first; i <= t->last; i++)
trie_recursive_free(t->child_list[i]);
/*endfor*/
}
/*endif*/
free(t);
}
/*endif*/
}
/*- End of function --------------------------------------------------------*/
static void trie_free(trie_t *s)
{
if (s)
{
if (s->root)
trie_recursive_free(s->root);
/*endif*/
free(s);
}
/*endif*/
}
/*- End of function --------------------------------------------------------*/
int main(int argc, char *argv[])
{
trie_t *s;
int i;
if ((s = trie_create()) == NULL)
exit(2);
/*endif*/
printf("/* THIS FILE WAS AUTOMATICALLY GENERATED - ANY MODIFICATIONS MADE TO THIS\n");
printf(" FILE MAY BE OVERWRITTEN DURING FUTURE BUILDS OF THE SOFTWARE */\n");
printf("\n");
for (i = 0; wordlist[i]; i++)
trie_add(s, wordlist[i], strlen(wordlist[i]));
/*endfor*/
printf("// The trie contains %d entries\n", i);
packed_ptr = 0;
trie_recursive_add_node_numbers(s->root);
packed_ptr = 0;
trie_recursive_build_packed_trie(s->root);
dump_trie();
trie_free(s);
return 0;
}
/*- End of function --------------------------------------------------------*/
/*- End of file ------------------------------------------------------------*/
View Git Blame Copy Permalink