freeswitch/libs/sqlite/test/thread2.test

# 2006 January 14
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this script is multithreading behavior
#
# $Id: thread2.test,v 1.2 2006/01/18 18:33:42 danielk1977 Exp $


set testdir [file dirname $argv0]
source $testdir/tester.tcl

# This file swaps database connections between threads. This
# is illegal if memory-management is enabled, so skip this file
# in that case.
ifcapable memorymanage {
  finish_test
  return
}


# Skip this whole file if the thread testing code is not enabled
#
if {[llength [info command thread_step]]==0 || [sqlite3 -has-codec]} {
  finish_test
  return
}
if {![info exists threadsOverrideEachOthersLocks]} {
  finish_test
  return
}

# Create some data to work with
#
do_test thread1-1.1 {
  execsql {
    CREATE TABLE t1(a,b);
    INSERT INTO t1 VALUES(1,'abcdefgh');
    INSERT INTO t1 SELECT a+1, b||b FROM t1;
    INSERT INTO t1 SELECT a+2, b||b FROM t1;
    INSERT INTO t1 SELECT a+4, b||b FROM t1;
    SELECT count(*), max(length(b)) FROM t1;
  }
} {8 64}

# Use the thread_swap command to move the database connections between
# threads, then verify that they still work.
#
do_test thread2-1.2 {
  db close
  thread_create A test.db
  thread_create B test.db
  thread_swap A B
  thread_compile A {SELECT a FROM t1 LIMIT 1}
  thread_result A
} {SQLITE_OK}
do_test thread2-1.3 {
  thread_step A
  thread_result A
} {SQLITE_ROW}
do_test thread2-1.4 {
  thread_argv A 0
} {1}
do_test thread2-1.5 {
  thread_finalize A
  thread_result A
} {SQLITE_OK}
do_test thread2-1.6 {
  thread_compile B {SELECT a FROM t1 LIMIT 1}
  thread_result B
} {SQLITE_OK}
do_test thread2-1.7 {
  thread_step B
  thread_result B
} {SQLITE_ROW}
do_test thread2-1.8 {
  thread_argv B 0
} {1}
do_test thread2-1.9 {
  thread_finalize B
  thread_result B
} {SQLITE_OK}

# Swap them again.
#
do_test thread2-2.2 {
  thread_swap A B
  thread_compile A {SELECT a FROM t1 LIMIT 1}
  thread_result A
} {SQLITE_OK}
do_test thread2-2.3 {
  thread_step A
  thread_result A
} {SQLITE_ROW}
do_test thread2-2.4 {
  thread_argv A 0
} {1}
do_test thread2-2.5 {
  thread_finalize A
  thread_result A
} {SQLITE_OK}
do_test thread2-2.6 {
  thread_compile B {SELECT a FROM t1 LIMIT 1}
  thread_result B
} {SQLITE_OK}
do_test thread2-2.7 {
  thread_step B
  thread_result B
} {SQLITE_ROW}
do_test thread2-2.8 {
  thread_argv B 0
} {1}
do_test thread2-2.9 {
  thread_finalize B
  thread_result B
} {SQLITE_OK}
thread_halt A
thread_halt B

# Save the original (correct) value of threadsOverrideEachOthersLocks
# so that it can be restored.  If this value is left set incorrectly, lots
# of things will go wrong in future tests.
#
set orig_threadOverride $threadsOverrideEachOthersLocks

# Pretend we are on a system (like RedHat9) were threads do not
# override each others locks.
#
set threadsOverrideEachOthersLocks 0

# Verify that we can move database connections between threads as
# long as no locks are held.
#
do_test thread2-3.1 {
  thread_create A test.db
  set DB [thread_db_get A]
  thread_halt A
} {}
do_test thread2-3.2 {
  set STMT [sqlite3_prepare $DB {SELECT a FROM t1 LIMIT 1} -1 TAIL]
  sqlite3_step $STMT
} SQLITE_ROW
do_test thread2-3.3 {
  sqlite3_column_int $STMT 0
} 1
do_test thread2-3.4 {
  sqlite3_finalize $STMT
} SQLITE_OK
do_test thread2-3.5 {
  set STMT [sqlite3_prepare $DB {SELECT max(a) FROM t1} -1 TAIL]
  sqlite3_step $STMT
} SQLITE_ROW
do_test thread2-3.6 {
  sqlite3_column_int $STMT 0
} 8
do_test thread2-3.7 {
  sqlite3_finalize $STMT
} SQLITE_OK
do_test thread2-3.8 {
  sqlite3_close $DB
} {SQLITE_OK}

do_test thread2-3.10 {
  thread_create A test.db
  thread_compile A {SELECT a FROM t1 LIMIT 1}
  thread_step A
  thread_finalize A
  set DB [thread_db_get A]
  thread_halt A
} {}
do_test thread2-3.11 {
  set STMT [sqlite3_prepare $DB {SELECT a FROM t1 LIMIT 1} -1 TAIL]
  sqlite3_step $STMT
} SQLITE_ROW
do_test thread2-3.12 {
  sqlite3_column_int $STMT 0
} 1
do_test thread2-3.13 {
  sqlite3_finalize $STMT
} SQLITE_OK
do_test thread2-3.14 {
  sqlite3_close $DB
} SQLITE_OK

do_test thread2-3.20 {
  thread_create A test.db
  thread_compile A {SELECT a FROM t1 LIMIT 3}
  thread_step A
  set STMT [thread_stmt_get A]
  set DB [thread_db_get A]
  thread_halt A
} {}
do_test thread2-3.21 {
  sqlite3_step $STMT
} SQLITE_ROW
do_test thread2-3.22 {
  sqlite3_column_int $STMT 0
} 2
do_test thread2-3.23 {
  # The unlock fails here.  But because we never check the return
  # code from sqlite3OsUnlock (because we cannot do anything about it
  # if it fails) we do not realize that an error has occurred.
  sqlite3_finalize $STMT
} SQLITE_OK
do_test thread2-3.25 {
  sqlite3_close $DB
} SQLITE_OK

do_test thread2-3.30 {
  thread_create A test.db
  thread_compile A {BEGIN}
  thread_step A
  thread_finalize A
  thread_compile A {SELECT a FROM t1 LIMIT 1}
  thread_step A
  thread_finalize A
  set DB [thread_db_get A]
  thread_halt A
} {}
do_test thread2-3.31 {
  set STMT [sqlite3_prepare $DB {INSERT INTO t1 VALUES(99,'error')} -1 TAIL]
  sqlite3_step $STMT
} SQLITE_ERROR
do_test thread2-3.32 {
  sqlite3_finalize $STMT
} SQLITE_MISUSE
do_test thread2-3.33 {
  sqlite3_close $DB
} SQLITE_OK

# VERY important to set the override flag back to its true value.
#
set threadsOverrideEachOthersLocks $orig_threadOverride

# Also important to halt the worker threads, which are using spin
# locks and eating away CPU cycles.
#
thread_halt *   
finish_test