retronetworking
/
freeswitch
13
0
Fork 0
Code Pull Requests Releases Activity
freeswitch/libs/spandsp/tests/v27ter_tests.c

488 lines
16 KiB
C
Raw Blame History

/*
* SpanDSP - a series of DSP components for telephony
*
* v27ter_tests.c
*
* Written by Steve Underwood <steveu@coppice.org>
*
* Copyright (C) 2003 Steve Underwood
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* $Id: v27ter_tests.c,v 1.106 2009/07/09 13:52:09 steveu Exp $
*/
/*! \page v27ter_tests_page V.27ter modem tests
\section v27ter_tests_page_sec_1 What does it do?
These tests test one way paths, as V.27ter is a half-duplex modem. They allow either:
- A V.27ter transmit modem to feed a V.27ter receive modem through a telephone line
model. BER testing is then used to evaluate performance under various line
conditions. This is effective for testing the basic performance of the
receive modem. It is also the only test mode provided for evaluating the
transmit modem.
- A V.27ter receive modem is used to decode V.27ter audio, stored in an audio file.
This is good way to evaluate performance with audio recorded from other
models of modem, and with real world problematic telephone lines.
If the appropriate GUI environment exists, the tests are built such that a visual
display of modem status is maintained.
\section v27ter_tests_page_sec_2 How is it used?
*/
/* Enable the following definition to enable direct probing into the FAX structures */
#define WITH_SPANDSP_INTERNALS
#if defined(HAVE_CONFIG_H)
#include "config.h"
#endif
#if defined(HAVE_FL_FL_H) && defined(HAVE_FL_FL_CARTESIAN_H) && defined(HAVE_FL_FL_AUDIO_METER_H)
#define ENABLE_GUI
#endif
#include <stdlib.h>
#include <stdio.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <sndfile.h>
//#if defined(WITH_SPANDSP_INTERNALS)
#define SPANDSP_EXPOSE_INTERNAL_STRUCTURES
//#endif
#include "spandsp.h"
#include "spandsp-sim.h"
#if defined(ENABLE_GUI)
#include "modem_monitor.h"
#include "line_model_monitor.h"
#endif
#define BLOCK_LEN 160
#define OUT_FILE_NAME "v27ter.wav"
char *decode_test_file = NULL;
int use_gui = FALSE;
int symbol_no = 0;
int rx_bits = 0;
bert_state_t bert;
one_way_line_model_state_t *line_model;
#if defined(ENABLE_GUI)
qam_monitor_t *qam_monitor;
#endif
bert_results_t latest_results;
static void reporter(void *user_data, int reason, bert_results_t *results)
{
switch (reason)
{
case BERT_REPORT_REGULAR:
fprintf(stderr, "BERT report regular - %d bits, %d bad bits, %d resyncs\n", results->total_bits, results->bad_bits, results->resyncs);
memcpy(&latest_results, results, sizeof(latest_results));
break;
default:
fprintf(stderr, "BERT report %s\n", bert_event_to_str(reason));
break;
}
}
/*- End of function --------------------------------------------------------*/
static void v27ter_rx_status(void *user_data, int status)
{
printf("V.27ter rx status is %s (%d)\n", signal_status_to_str(status), status);
}
/*- End of function --------------------------------------------------------*/
static void v27terputbit(void *user_data, int bit)
{
if (bit < 0)
{
v27ter_rx_status(user_data, bit);
return;
}
if (decode_test_file)
printf("Rx bit %d - %d\n", rx_bits++, bit);
else
bert_put_bit(&bert, bit);
}
/*- End of function --------------------------------------------------------*/
static void v27ter_tx_status(void *user_data, int status)
{
printf("V.27ter tx status is %s (%d)\n", signal_status_to_str(status), status);
}
/*- End of function --------------------------------------------------------*/
static int v27tergetbit(void *user_data)
{
return bert_get_bit(&bert);
}
/*- End of function --------------------------------------------------------*/
static void qam_report(void *user_data, const complexf_t *constel, const complexf_t *target, int symbol)
{
int i;
int len;
complexf_t *coeffs;
float fpower;
float error;
v27ter_rx_state_t *rx;
static float smooth_power = 0.0f;
#if defined(ENABLE_GUI)
static int reports = 0;
#endif
rx = (v27ter_rx_state_t *) user_data;
if (constel)
{
fpower = (constel->re - target->re)*(constel->re - target->re)
+ (constel->im - target->im)*(constel->im - target->im);
smooth_power = 0.95f*smooth_power + 0.05f*fpower;
#if defined(ENABLE_GUI)
if (use_gui)
{
qam_monitor_update_constel(qam_monitor, constel);
qam_monitor_update_carrier_tracking(qam_monitor, v27ter_rx_carrier_frequency(rx));
qam_monitor_update_symbol_tracking(qam_monitor, v27ter_rx_symbol_timing_correction(rx));
}
#endif
error = constel->im*target->re - constel->re*target->im;
printf("Tracking error %f %f %f %f %f %f\n", error, v27ter_rx_carrier_frequency(rx), constel->re, constel->im, target->re, target->im);
printf("%8d [%8.4f, %8.4f] [%8.4f, %8.4f] %2x %8.4f %8.4f %9.4f %7.3f %7.4f\n",
symbol_no,
constel->re,
constel->im,
target->re,
target->im,
symbol,
fpower,
smooth_power,
v27ter_rx_carrier_frequency(rx),
v27ter_rx_signal_power(rx),
v27ter_rx_symbol_timing_correction(rx));
len = v27ter_rx_equalizer_state(rx, &coeffs);
printf("Equalizer B:\n");
for (i = 0; i < len; i++)
printf("%3d (%15.5f, %15.5f) -> %15.5f\n", i, coeffs[i].re, coeffs[i].im, powerf(&coeffs[i]));
#if defined(WITH_SPANDSP_INTERNALS)
printf("Gardtest %d %f %d\n", symbol_no, v27ter_rx_symbol_timing_correction(rx), rx->gardner_integrate);
#endif
printf("Carcar %d %f\n", symbol_no, v27ter_rx_carrier_frequency(rx));
#if defined(ENABLE_GUI)
if (use_gui)
{
if (++reports >= 1000)
{
qam_monitor_update_equalizer(qam_monitor, coeffs, len);
reports = 0;
}
}
#endif
symbol_no++;
}
else
{
printf("Gardner step %d\n", symbol);
len = v27ter_rx_equalizer_state(rx, &coeffs);
printf("Equalizer A:\n");
for (i = 0; i < len; i++)
printf("%3d (%15.5f, %15.5f) -> %15.5f\n", i, coeffs[i].re, coeffs[i].im, powerf(&coeffs[i]));
#if defined(ENABLE_GUI)
if (use_gui)
qam_monitor_update_equalizer(qam_monitor, coeffs, len);
#endif
}
}
/*- End of function --------------------------------------------------------*/
int main(int argc, char *argv[])
{
v27ter_rx_state_t *rx;
v27ter_tx_state_t *tx;
bert_results_t bert_results;
int16_t gen_amp[BLOCK_LEN];
int16_t amp[BLOCK_LEN];
SNDFILE *inhandle;
SNDFILE *outhandle;
int outframes;
int samples;
int tep;
int test_bps;
int noise_level;
int signal_level;
int bits_per_test;
int line_model_no;
int block_no;
int log_audio;
int channel_codec;
int rbs_pattern;
int opt;
logging_state_t *logging;
channel_codec = MUNGE_CODEC_NONE;
rbs_pattern = 0;
test_bps = 4800;
tep = FALSE;
line_model_no = 0;
decode_test_file = NULL;
use_gui = FALSE;
noise_level = -70;
signal_level = -13;
bits_per_test = 50000;
log_audio = FALSE;
while ((opt = getopt(argc, argv, "b:B:c:d:glm:n:r:s:t")) != -1)
{
switch (opt)
{
case 'b':
test_bps = atoi(optarg);
if (test_bps != 4800 && test_bps != 2400)
{
fprintf(stderr, "Invalid bit rate specified\n");
exit(2);
}
break;
case 'B':
bits_per_test = atoi(optarg);
break;
case 'c':
channel_codec = atoi(optarg);
break;
case 'd':
decode_test_file = optarg;
break;
case 'g':
#if defined(ENABLE_GUI)
use_gui = TRUE;
#else
fprintf(stderr, "Graphical monitoring not available\n");
exit(2);
#endif
break;
case 'l':
log_audio = TRUE;
break;
case 'm':
line_model_no = atoi(optarg);
break;
case 'n':
noise_level = atoi(optarg);
break;
case 'r':
rbs_pattern = atoi(optarg);
break;
case 's':
signal_level = atoi(optarg);
break;
case 't':
tep = TRUE;
break;
default:
//usage();
exit(2);
break;
}
}
inhandle = NULL;
outhandle = NULL;
if (log_audio)
{
if ((outhandle = sf_open_telephony_write(OUT_FILE_NAME, 1)) == NULL)
{
fprintf(stderr, " Cannot create audio file '%s'\n", OUT_FILE_NAME);
exit(2);
}
}
if (decode_test_file)
{
/* We will decode the audio from a file. */
tx = NULL;
if ((inhandle = sf_open_telephony_read(decode_test_file, 1)) == NULL)
{
fprintf(stderr, " Cannot open audio file '%s'\n", decode_test_file);
exit(2);
}
}
else
{
/* We will generate V.27ter audio, and add some noise to it. */
tx = v27ter_tx_init(NULL, test_bps, tep, v27tergetbit, NULL);
v27ter_tx_power(tx, signal_level);
v27ter_tx_set_modem_status_handler(tx, v27ter_tx_status, (void *) tx);
/* Move the carrier off a bit */
#if defined(WITH_SPANDSP_INTERNALS)
tx->carrier_phase_rate = dds_phase_ratef(1810.0f);
#endif
bert_init(&bert, bits_per_test, BERT_PATTERN_ITU_O152_11, test_bps, 20);
bert_set_report(&bert, 10000, reporter, NULL);
if ((line_model = one_way_line_model_init(line_model_no, (float) noise_level, channel_codec, rbs_pattern)) == NULL)
{
fprintf(stderr, " Failed to create line model\n");
exit(2);
}
}
rx = v27ter_rx_init(NULL, test_bps, v27terputbit, NULL);
v27ter_rx_set_modem_status_handler(rx, v27ter_rx_status, (void *) rx);
v27ter_rx_set_qam_report_handler(rx, qam_report, (void *) rx);
logging = v27ter_rx_get_logging_state(rx);
span_log_set_level(logging, SPAN_LOG_SHOW_SEVERITY | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_FLOW);
span_log_set_tag(logging, "V.27ter-rx");
#if defined(ENABLE_GUI)
if (use_gui)
{
qam_monitor = qam_monitor_init(2.0f, NULL);
if (!decode_test_file)
{
start_line_model_monitor(129);
line_model_monitor_line_model_update(line_model->near_filter, line_model->near_filter_len);
}
}
#endif
memset(&latest_results, 0, sizeof(latest_results));
for (block_no = 0; ; block_no++)
{
if (decode_test_file)
{
samples = sf_readf_short(inhandle, amp, BLOCK_LEN);
#if defined(ENABLE_GUI)
if (use_gui)
qam_monitor_update_audio_level(qam_monitor, amp, samples);
#endif
if (samples == 0)
break;
}
else
{
samples = v27ter_tx(tx, gen_amp, BLOCK_LEN);
#if defined(ENABLE_GUI)
if (use_gui)
qam_monitor_update_audio_level(qam_monitor, gen_amp, samples);
#endif
if (samples == 0)
{
printf("Restarting on zero output\n");
/* Push a little silence through, to ensure all the data bits get out of the buffers */
memset(amp, 0, BLOCK_LEN*sizeof(int16_t));
v27ter_rx(rx, amp, BLOCK_LEN);
v27ter_rx(rx, amp, BLOCK_LEN);
v27ter_rx(rx, amp, BLOCK_LEN);
/* Note that we might get a few bad bits as the carrier shuts down. */
bert_result(&bert, &bert_results);
fprintf(stderr, "Final result %ddBm0/%ddBm0, %d bits, %d bad bits, %d resyncs\n", signal_level, noise_level, bert_results.total_bits, bert_results.bad_bits, bert_results.resyncs);
fprintf(stderr, "Last report %ddBm0/%ddBm0, %d bits, %d bad bits, %d resyncs\n", signal_level, noise_level, latest_results.total_bits, latest_results.bad_bits, latest_results.resyncs);
/* See if bit errors are appearing yet. Also check we are getting enough bits out of the receiver. The last regular report
should be error free, though the final report will generally contain bits errors as the carrier was dying. The total
number of bits out of the receiver should be at least the number we sent. Also, since BERT sync should have occurred
rapidly at the start of transmission, the last report should have occurred at not much less than the total number of
bits we sent. */
if (bert_results.total_bits < bits_per_test
||
latest_results.total_bits < bits_per_test - 100
||
latest_results.bad_bits != 0)
{
break;
}
memset(&latest_results, 0, sizeof(latest_results));
signal_level--;
v27ter_tx_restart(tx, test_bps, tep);
v27ter_tx_power(tx, signal_level);
v27ter_rx_restart(rx, test_bps, FALSE);
bert_init(&bert, bits_per_test, BERT_PATTERN_ITU_O152_11, test_bps, 20);
bert_set_report(&bert, 10000, reporter, NULL);
one_way_line_model_release(line_model);
if ((line_model = one_way_line_model_init(line_model_no, (float) noise_level, channel_codec, 0)) == NULL)
{
fprintf(stderr, " Failed to create line model\n");
exit(2);
}
}
if (log_audio)
{
outframes = sf_writef_short(outhandle, gen_amp, samples);
if (outframes != samples)
{
fprintf(stderr, " Error writing audio file\n");
exit(2);
}
}
one_way_line_model(line_model, amp, gen_amp, samples);
}
#if defined(ENABLE_GUI)
if (use_gui && !decode_test_file)
line_model_monitor_line_spectrum_update(amp, samples);
#endif
v27ter_rx(rx, amp, samples);
}
if (!decode_test_file)
{
bert_result(&bert, &bert_results);
fprintf(stderr, "At completion:\n");
fprintf(stderr, "Final result %ddBm0/%ddBm0, %d bits, %d bad bits, %d resyncs\n", signal_level, noise_level, bert_results.total_bits, bert_results.bad_bits, bert_results.resyncs);
fprintf(stderr, "Last report %ddBm0/%ddBm0, %d bits, %d bad bits, %d resyncs\n", signal_level, noise_level, latest_results.total_bits, latest_results.bad_bits, latest_results.resyncs);
one_way_line_model_release(line_model);
if (signal_level > -43)
{
printf("Tests failed.\n");
exit(2);
}
printf("Tests passed.\n");
}
#if defined(ENABLE_GUI)
if (use_gui)
qam_wait_to_end(qam_monitor);
#endif
if (decode_test_file)
{
if (sf_close(inhandle))
{
fprintf(stderr, " Cannot close audio file '%s'\n", decode_test_file);
exit(2);
}
}
if (log_audio)
{
if (sf_close(outhandle))
{
fprintf(stderr, " Cannot close audio file '%s'\n", OUT_FILE_NAME);
exit(2);
}
}
return 0;
}
/*- End of function --------------------------------------------------------*/
/*- End of file ------------------------------------------------------------*/
View Git Blame Copy Permalink