retronetworking
/
freeswitch
13
0
Fork 0
Code Pull Requests Releases Activity
freeswitch/libs/spandsp/src/t38_terminal.c

1580 lines
61 KiB
C
Raw Blame History

/*
* SpanDSP - a series of DSP components for telephony
*
* t38_terminal.c - T.38 termination, less the packet exchange part
*
* Written by Steve Underwood <steveu@coppice.org>
*
* Copyright (C) 2005, 2006, 2008 Steve Underwood
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License version 2.1,
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*! \file */
#if defined(HAVE_CONFIG_H)
#include "config.h"
#endif
#include <inttypes.h>
#include <stdlib.h>
#include <stdio.h>
#include <fcntl.h>
#include <time.h>
#include <string.h>
#if defined(HAVE_TGMATH_H)
#include <tgmath.h>
#endif
#if defined(HAVE_MATH_H)
#include <math.h>
#endif
#if defined(HAVE_STDBOOL_H)
#include <stdbool.h>
#else
#include "spandsp/stdbool.h"
#endif
#include "floating_fudge.h"
#include <assert.h>
#include <tiffio.h>
#include "spandsp/telephony.h"
#include "spandsp/alloc.h"
#include "spandsp/logging.h"
#include "spandsp/bit_operations.h"
#include "spandsp/queue.h"
#include "spandsp/power_meter.h"
#include "spandsp/complex.h"
#include "spandsp/tone_generate.h"
#include "spandsp/async.h"
#include "spandsp/hdlc.h"
#include "spandsp/fsk.h"
#include "spandsp/v29tx.h"
#include "spandsp/v29rx.h"
#include "spandsp/v27ter_tx.h"
#include "spandsp/v27ter_rx.h"
#include "spandsp/v17tx.h"
#include "spandsp/v17rx.h"
#include "spandsp/timezone.h"
#include "spandsp/t4_rx.h"
#include "spandsp/t4_tx.h"
#include "spandsp/image_translate.h"
#include "spandsp/t81_t82_arith_coding.h"
#include "spandsp/t85.h"
#include "spandsp/t42.h"
#include "spandsp/t43.h"
#include "spandsp/t4_t6_decode.h"
#include "spandsp/t4_t6_encode.h"
#include "spandsp/t30_fcf.h"
#include "spandsp/t35.h"
#include "spandsp/t30.h"
#include "spandsp/t30_api.h"
#include "spandsp/t30_logging.h"
#include "spandsp/t38_core.h"
#include "spandsp/t38_terminal.h"
#include "spandsp/private/logging.h"
#include "spandsp/private/timezone.h"
#include "spandsp/private/t81_t82_arith_coding.h"
#include "spandsp/private/t85.h"
#include "spandsp/private/t42.h"
#include "spandsp/private/t43.h"
#include "spandsp/private/t4_t6_decode.h"
#include "spandsp/private/t4_t6_encode.h"
#include "spandsp/private/image_translate.h"
#include "spandsp/private/t4_rx.h"
#include "spandsp/private/t4_tx.h"
#include "spandsp/private/t30.h"
#include "spandsp/private/t38_core.h"
#include "spandsp/private/t38_terminal.h"
/* Settings suitable for paced transmission over a UDP transport */
#define DEFAULT_US_PER_TX_CHUNK 30000
#define INDICATOR_TX_COUNT 3
#define DATA_TX_COUNT 1
#define DATA_END_TX_COUNT 3
/* Settings suitable for unpaced transmission over a TCP transport */
#define MAX_OCTETS_PER_UNPACED_CHUNK 300
/* Backstop timeout if reception of packets stops in the middle of a burst */
#define MID_RX_TIMEOUT 15000
enum
{
T38_CHUNKING_MERGE_FCS_WITH_DATA = 0x0001,
T38_CHUNKING_WHOLE_FRAMES = 0x0002,
T38_CHUNKING_ALLOW_TEP_TIME = 0x0004,
T38_CHUNKING_SEND_REGULAR_INDICATORS = 0x0008,
T38_CHUNKING_SEND_2S_REGULAR_INDICATORS = 0x0010
};
enum
{
T38_TIMED_STEP_NONE = 0,
T38_TIMED_STEP_NON_ECM_MODEM = 0x10,
T38_TIMED_STEP_NON_ECM_MODEM_2 = 0x11,
T38_TIMED_STEP_NON_ECM_MODEM_3 = 0x12,
T38_TIMED_STEP_NON_ECM_MODEM_4 = 0x13,
T38_TIMED_STEP_NON_ECM_MODEM_5 = 0x14,
T38_TIMED_STEP_HDLC_MODEM = 0x20,
T38_TIMED_STEP_HDLC_MODEM_2 = 0x21,
T38_TIMED_STEP_HDLC_MODEM_3 = 0x22,
T38_TIMED_STEP_HDLC_MODEM_4 = 0x23,
T38_TIMED_STEP_HDLC_MODEM_5 = 0x24,
T38_TIMED_STEP_CED = 0x30,
T38_TIMED_STEP_CED_2 = 0x31,
T38_TIMED_STEP_CED_3 = 0x32,
T38_TIMED_STEP_CNG = 0x40,
T38_TIMED_STEP_CNG_2 = 0x41,
T38_TIMED_STEP_PAUSE = 0x50,
T38_TIMED_STEP_NO_SIGNAL = 0x60
};
static __inline__ int front_end_status(t38_terminal_state_t *s, int status)
{
t30_front_end_status(&s->t30, status);
if (s->t38_fe.timed_step == T38_TIMED_STEP_NONE)
return -1;
return 0;
}
/*- End of function --------------------------------------------------------*/
static __inline__ void hdlc_accept_frame(t38_terminal_state_t *s, const uint8_t *msg, int len, int ok)
{
t30_hdlc_accept(&s->t30, msg, len, ok);
}
/*- End of function --------------------------------------------------------*/
static int extra_bits_in_stuffed_frame(const uint8_t buf[], int len)
{
int bitstream;
int ones;
int stuffed;
int i;
int j;
ones = 0;
stuffed = 0;
/* We should really append the CRC, and include the stuffed bits for that, to get
the exact number of bits in the frame. */
//len = crc_itu16_append(buf, len);
for (i = 0; i < len; i++)
{
bitstream = buf[i];
for (j = 0; j < 8; j++)
{
if ((bitstream & 1))
{
if (++ones >= 5)
{
ones = 0;
stuffed++;
}
/*endif*/
}
else
{
ones = 0;
}
/*endif*/
bitstream >>= 1;
}
/*endfor*/
}
/*endfor*/
/* The total length of the frame is:
the number of bits in the body
+ the number of additional bits in the body due to stuffing
+ the number of bits in the CRC
+ the number of additional bits in the CRC due to stuffing
+ 16 bits for the two terminating flag octets.
Lets just allow 3 bits for the CRC, which is the worst case. It
avoids calculating the real CRC, and the worst it can do is cause
a flag octet's worth of additional output.
*/
return stuffed + 16 + 3 + 16;
}
/*- End of function --------------------------------------------------------*/
static int process_rx_missing(t38_core_state_t *t, void *user_data, int rx_seq_no, int expected_seq_no)
{
t38_terminal_state_t *s;
s = (t38_terminal_state_t *) user_data;
s->t38_fe.rx_data_missing = true;
return 0;
}
/*- End of function --------------------------------------------------------*/
static int process_rx_indicator(t38_core_state_t *t, void *user_data, int indicator)
{
t38_terminal_state_t *s;
t38_terminal_front_end_state_t *fe;
s = (t38_terminal_state_t *) user_data;
fe = &s->t38_fe;
/* Protect against T.38 stuff arriving after we've actually finished. */
if (fe->current_rx_type == T30_MODEM_DONE)
return 0;
/*endif*/
if (t->current_rx_indicator == indicator)
{
/* This is probably due to the far end repeating itself, or slipping
preamble messages in between HDLC frames. T.38/V.1.3 tells us to
ignore it. Its harmless. */
return 0;
}
/*endif*/
/* In termination mode we don't care very much about indicators telling us training
is starting. We only care about V.21 preamble starting, for timeout control, and
the actual data. */
switch (indicator)
{
case T38_IND_NO_SIGNAL:
if (t->current_rx_indicator == T38_IND_V21_PREAMBLE
&&
(fe->current_rx_type == T30_MODEM_V21 || fe->current_rx_type == T30_MODEM_CNG))
{
hdlc_accept_frame(s, NULL, SIG_STATUS_CARRIER_DOWN, true);
}
/*endif*/
fe->timeout_rx_samples = 0;
front_end_status(s, T30_FRONT_END_SIGNAL_ABSENT);
break;
case T38_IND_CNG:
/* We are completely indifferent to the startup tones. They serve no purpose for us.
We can't even assume that the existance of a tone means the far end is achieving
proper communication. Some T.38 gateways will just send out a CED or CNG indicator
without having seen anything from the far end FAX terminal.
Just report them for completeness. */
front_end_status(s, T30_FRONT_END_CNG_PRESENT);
break;
case T38_IND_CED:
front_end_status(s, T30_FRONT_END_CED_PRESENT);
break;
case T38_IND_V21_PREAMBLE:
fe->timeout_rx_samples = fe->samples + ms_to_samples(MID_RX_TIMEOUT);
front_end_status(s, T30_FRONT_END_SIGNAL_PRESENT);
break;
case T38_IND_V27TER_2400_TRAINING:
case T38_IND_V27TER_4800_TRAINING:
case T38_IND_V29_7200_TRAINING:
case T38_IND_V29_9600_TRAINING:
case T38_IND_V17_7200_SHORT_TRAINING:
case T38_IND_V17_7200_LONG_TRAINING:
case T38_IND_V17_9600_SHORT_TRAINING:
case T38_IND_V17_9600_LONG_TRAINING:
case T38_IND_V17_12000_SHORT_TRAINING:
case T38_IND_V17_12000_LONG_TRAINING:
case T38_IND_V17_14400_SHORT_TRAINING:
case T38_IND_V17_14400_LONG_TRAINING:
case T38_IND_V34_CNTL_CHANNEL_1200:
case T38_IND_V34_PRI_CHANNEL:
case T38_IND_V33_12000_TRAINING:
case T38_IND_V33_14400_TRAINING:
/* We really don't care what kind of modem is delivering the following image data.
We only care that some kind of fast modem signal is coming next. */
fe->timeout_rx_samples = fe->samples + ms_to_samples(MID_RX_TIMEOUT);
front_end_status(s, T30_FRONT_END_SIGNAL_PRESENT);
break;
case T38_IND_V8_ANSAM:
case T38_IND_V8_SIGNAL:
case T38_IND_V34_CC_RETRAIN:
/* V.34 support is a work in progress. */
break;
default:
front_end_status(s, T30_FRONT_END_SIGNAL_ABSENT);
break;
}
/*endswitch*/
fe->hdlc_rx.len = 0;
fe->rx_data_missing = false;
return 0;
}
/*- End of function --------------------------------------------------------*/
static int fake_rx_indicator(t38_core_state_t *t, t38_terminal_state_t *s, int indicator)
{
int ret;
ret = process_rx_indicator(t, s, indicator);
t->current_rx_indicator = indicator;
return ret;
}
/*- End of function --------------------------------------------------------*/
static void process_hdlc_data(t38_terminal_front_end_state_t *fe, const uint8_t *buf, int len)
{
if (fe->hdlc_rx.len + len <= T38_MAX_HDLC_LEN)
{
bit_reverse(fe->hdlc_rx.buf + fe->hdlc_rx.len, buf, len);
fe->hdlc_rx.len += len;
}
else
{
fe->rx_data_missing = true;
}
}
/*- End of function --------------------------------------------------------*/
static int process_rx_data(t38_core_state_t *t, void *user_data, int data_type, int field_type, const uint8_t *buf, int len)
{
t38_terminal_state_t *s;
t38_terminal_front_end_state_t *fe;
#if defined(_MSC_VER)
uint8_t *buf2 = (uint8_t *) _alloca(len);
#else
uint8_t buf2[len];
#endif
s = (t38_terminal_state_t *) user_data;
fe = &s->t38_fe;
/* Protect against T.38 stuff arriving after we've actually finished. */
if (fe->current_rx_type == T30_MODEM_DONE)
return 0;
/*endif*/
/* In termination mode we don't care very much what the data type is apart from a couple of
special cases. */
switch (data_type)
{
case T38_DATA_V8:
switch (field_type)
{
case T38_FIELD_CM_MESSAGE:
if (len >= 1)
span_log(&s->logging, SPAN_LOG_FLOW, "CM profile %d - %s\n", buf[0] - '0', t38_cm_profile_to_str(buf[0]));
else
span_log(&s->logging, SPAN_LOG_FLOW, "Bad length for CM message - %d\n", len);
/*endif*/
//front_end_status(s, T30_FRONT_END_RECEIVE_COMPLETE);
break;
case T38_FIELD_JM_MESSAGE:
if (len >= 2)
span_log(&s->logging, SPAN_LOG_FLOW, "JM - %s\n", t38_jm_to_str(buf, len));
else
span_log(&s->logging, SPAN_LOG_FLOW, "Bad length for JM message - %d\n", len);
/*endif*/
//front_end_status(s, T30_FRONT_END_RECEIVE_COMPLETE);
break;
case T38_FIELD_CI_MESSAGE:
if (len >= 1)
span_log(&s->logging, SPAN_LOG_FLOW, "CI 0x%X\n", buf[0]);
else
span_log(&s->logging, SPAN_LOG_FLOW, "Bad length for CI message - %d\n", len);
/*endif*/
//front_end_status(s, T30_FRONT_END_RECEIVE_COMPLETE);
break;
default:
break;
}
/*endswitch*/
return 0;
case T38_DATA_V34_PRI_RATE:
switch (field_type)
{
case T38_FIELD_V34RATE:
if (len >= 3)
{
/* Just get and store the rate. The front end has no real interest in the
actual bit rate. */
fe->t38.v34_rate = t38_v34rate_to_bps(buf, len);
span_log(&s->logging, SPAN_LOG_FLOW, "V.34 rate %d bps\n", fe->t38.v34_rate);
}
else
{
span_log(&s->logging, SPAN_LOG_FLOW, "Bad length for V34rate message - %d\n", len);
}
/*endif*/
break;
default:
break;
}
/*endswitch*/
return 0;
default:
break;
}
/*endswitch*/
switch (field_type)
{
case T38_FIELD_HDLC_DATA:
if (fe->timeout_rx_samples == 0)
{
/* HDLC can just start without any signal indicator on some platforms, even when
there is zero packet loss. Nasty, but true. Its a good idea to be tolerant of
loss, though, so accepting a sudden start of HDLC data is the right thing to do. */
fake_rx_indicator(t, s, T38_IND_V21_PREAMBLE);
/* All real HDLC messages in the FAX world start with 0xFF. If this one is not starting
with 0xFF it would appear some octets must have been missed before this one. */
if (len <= 0 || buf[0] != 0xFF)
fe->rx_data_missing = true;
/*endif*/
}
/*endif*/
if (len > 0)
{
process_hdlc_data(fe, buf, len);
}
/*endif*/
fe->timeout_rx_samples = fe->samples + ms_to_samples(MID_RX_TIMEOUT);
break;
case T38_FIELD_HDLC_FCS_OK:
if (len > 0)
{
span_log(&s->logging, SPAN_LOG_WARNING, "There is data in a T38_FIELD_HDLC_FCS_OK!\n");
/* The sender has incorrectly included data in this message. Cisco implemented inserting
HDLC data here and Commetrex followed for compatibility reasons. We should, too. */
process_hdlc_data(fe, buf, len);
}
/*endif*/
/* Some T.38 implementations send multiple T38_FIELD_HDLC_FCS_OK messages, in IFP packets with
incrementing sequence numbers, which are actually repeats. They get through to this point because
of the incrementing sequence numbers. We need to filter them here in a context sensitive manner. */
if (fe->hdlc_rx.len > 0)
{
span_log(&s->logging, SPAN_LOG_FLOW, "Type %s - CRC OK (%s)\n", (fe->hdlc_rx.len >= 3) ? t30_frametype(fe->hdlc_rx.buf[2]) : "???", (fe->rx_data_missing) ? "missing octets" : "clean");
hdlc_accept_frame(s, fe->hdlc_rx.buf, fe->hdlc_rx.len, !fe->rx_data_missing);
fe->hdlc_rx.len = 0;
}
/*endif*/
fe->rx_data_missing = false;
fe->timeout_rx_samples = fe->samples + ms_to_samples(MID_RX_TIMEOUT);
break;
case T38_FIELD_HDLC_FCS_BAD:
if (len > 0)
{
span_log(&s->logging, SPAN_LOG_WARNING, "There is data in a T38_FIELD_HDLC_FCS_BAD!\n");
/* The sender has incorrectly included data in this message. Cisco implemented inserting
HDLC data here and Commetrex followed for compatibility reasons. We should, too. */
process_hdlc_data(fe, buf, len);
}
/*endif*/
/* Some T.38 implementations send multiple T38_FIELD_HDLC_FCS_BAD messages, in IFP packets with
incrementing sequence numbers, which are actually repeats. They get through to this point because
of the incrementing sequence numbers. We need to filter them here in a context sensitive manner. */
if (fe->hdlc_rx.len > 0)
{
span_log(&s->logging, SPAN_LOG_FLOW, "Type %s - CRC bad (%s)\n", (fe->hdlc_rx.len >= 3) ? t30_frametype(fe->hdlc_rx.buf[2]) : "???", (fe->rx_data_missing) ? "missing octets" : "clean");
hdlc_accept_frame(s, fe->hdlc_rx.buf, fe->hdlc_rx.len, false);
fe->hdlc_rx.len = 0;
}
/*endif*/
fe->rx_data_missing = false;
fe->timeout_rx_samples = fe->samples + ms_to_samples(MID_RX_TIMEOUT);
break;
case T38_FIELD_HDLC_FCS_OK_SIG_END:
if (len > 0)
{
span_log(&s->logging, SPAN_LOG_WARNING, "There is data in a T38_FIELD_HDLC_FCS_OK_SIG_END!\n");
/* The sender has incorrectly included data in this message. Cisco implemented inserting
HDLC data here and Commetrex followed for compatibility reasons. We should, too. */
process_hdlc_data(fe, buf, len);
}
/*endif*/
/* Some T.38 implementations send multiple T38_FIELD_HDLC_FCS_OK_SIG_END messages, in IFP packets with
incrementing sequence numbers, which are actually repeats. They get through to this point because
of the incrementing sequence numbers. We need to filter them here in a context sensitive manner. */
if (fe->hdlc_rx.len > 0)
{
span_log(&s->logging, SPAN_LOG_FLOW, "Type %s - CRC OK, sig end (%s)\n", (fe->hdlc_rx.len >= 3) ? t30_frametype(fe->hdlc_rx.buf[2]) : "???", (fe->rx_data_missing) ? "missing octets" : "clean");
hdlc_accept_frame(s, fe->hdlc_rx.buf, fe->hdlc_rx.len, !fe->rx_data_missing);
fe->hdlc_rx.len = 0;
}
/*endif*/
fe->rx_data_missing = false;
if (t->current_rx_data_type != data_type || t->current_rx_field_type != field_type)
hdlc_accept_frame(s, NULL, SIG_STATUS_CARRIER_DOWN, true);
/*endif*/
/* Treat this like a no signal indicator has occurred, so if the no signal indicator is missing, we are still OK */
fake_rx_indicator(t, s, T38_IND_NO_SIGNAL);
break;
case T38_FIELD_HDLC_FCS_BAD_SIG_END:
if (len > 0)
{
span_log(&s->logging, SPAN_LOG_WARNING, "There is data in a T38_FIELD_HDLC_FCS_BAD_SIG_END!\n");
/* The sender has incorrectly included data in this message. Cisco implemented inserting
HDLC data here and Commetrex followed for compatibility reasons. We should, too. */
process_hdlc_data(fe, buf, len);
}
/*endif*/
/* Some T.38 implementations send multiple T38_FIELD_HDLC_FCS_BAD_SIG_END messages, in IFP packets with
incrementing sequence numbers, which are actually repeats. They get through to this point because
of the incrementing sequence numbers. We need to filter them here in a context sensitive manner. */
if (fe->hdlc_rx.len > 0)
{
span_log(&s->logging, SPAN_LOG_FLOW, "Type %s - CRC bad, sig end (%s)\n", (fe->hdlc_rx.len >= 3) ? t30_frametype(fe->hdlc_rx.buf[2]) : "???", (fe->rx_data_missing) ? "missing octets" : "clean");
hdlc_accept_frame(s, fe->hdlc_rx.buf, fe->hdlc_rx.len, false);
fe->hdlc_rx.len = 0;
}
/*endif*/
fe->rx_data_missing = false;
if (t->current_rx_data_type != data_type || t->current_rx_field_type != field_type)
hdlc_accept_frame(s, NULL, SIG_STATUS_CARRIER_DOWN, true);
/*endif*/
/* Treat this like a no signal indicator has occurred, so if the no signal indicator is missing, we are still OK */
fake_rx_indicator(t, s, T38_IND_NO_SIGNAL);
break;
case T38_FIELD_HDLC_SIG_END:
if (len > 0)
{
span_log(&s->logging, SPAN_LOG_WARNING, "There is data in a T38_FIELD_HDLC_SIG_END!\n");
/* The sender has incorrectly included data in this message, but there seems nothing meaningful
it could be. There could not be an FCS good/bad report beyond this. */
}
/*endif*/
/* Some T.38 implementations send multiple T38_FIELD_HDLC_SIG_END messages, in IFP packets with
incrementing sequence numbers, which are actually repeats. They get through to this point because
of the incrementing sequence numbers. We need to filter them here in a context sensitive manner. */
if (t->current_rx_data_type != data_type || t->current_rx_field_type != field_type)
{
/* WORKAROUND: At least some Mediatrix boxes have a bug, where they can send this message at the
end of non-ECM data. We need to tolerate this. We use the generic receive complete
indication, rather than the specific HDLC carrier down. */
/* This message is expected under 2 circumstances. One is as an alternative to T38_FIELD_HDLC_FCS_OK_SIG_END -
i.e. they send T38_FIELD_HDLC_FCS_OK, and then T38_FIELD_HDLC_SIG_END when the carrier actually drops.
The other is because the HDLC signal drops unexpectedly - i.e. not just after a final frame. */
fe->hdlc_rx.len = 0;
fe->rx_data_missing = false;
front_end_status(s, T30_FRONT_END_RECEIVE_COMPLETE);
}
/*endif*/
/* Treat this like a no signal indicator has occurred, so if the no signal indicator is missing, we are still OK */
fake_rx_indicator(t, s, T38_IND_NO_SIGNAL);
break;
case T38_FIELD_T4_NON_ECM_DATA:
if (!fe->rx_signal_present)
{
t30_non_ecm_put_bit(&s->t30, SIG_STATUS_TRAINING_SUCCEEDED);
fe->rx_signal_present = true;
}
/*endif*/
if (len > 0)
{
bit_reverse(buf2, buf, len);
t30_non_ecm_put(&s->t30, buf2, len);
}
/*endif*/
fe->timeout_rx_samples = fe->samples + ms_to_samples(MID_RX_TIMEOUT);
break;
case T38_FIELD_T4_NON_ECM_SIG_END:
/* Some T.38 implementations send multiple T38_FIELD_T4_NON_ECM_SIG_END messages, in IFP packets with
incrementing sequence numbers, which are actually repeats. They get through to this point because
of the incrementing sequence numbers. We need to filter them here in a context sensitive manner. */
if (t->current_rx_data_type != data_type || t->current_rx_field_type != field_type)
{
if (len > 0)
{
if (!fe->rx_signal_present)
{
t30_non_ecm_put_bit(&s->t30, SIG_STATUS_TRAINING_SUCCEEDED);
fe->rx_signal_present = true;
}
/*endif*/
bit_reverse(buf2, buf, len);
t30_non_ecm_put(&s->t30, buf2, len);
}
/*endif*/
/* WORKAROUND: At least some Mediatrix boxes have a bug, where they can send HDLC signal end where
they should send non-ECM signal end. It is possible they also do the opposite.
We need to tolerate this, so we use the generic receive complete
indication, rather than the specific non-ECM carrier down. */
front_end_status(s, T30_FRONT_END_RECEIVE_COMPLETE);
}
/*endif*/
fe->rx_signal_present = false;
/* Treat this like a no signal indicator has occurred, so if the no signal indicator is missing, we are still OK */
fake_rx_indicator(t, s, T38_IND_NO_SIGNAL);
break;
default:
break;
}
/*endswitch*/
return 0;
}
/*- End of function --------------------------------------------------------*/
static void send_hdlc(void *user_data, const uint8_t *msg, int len)
{
t38_terminal_state_t *s;
s = (t38_terminal_state_t *) user_data;
if (len == 0)
{
/* A length of zero means shut down the HDLC transmission */
/* Setting len to -1 makes HDLC shut down */
s->t38_fe.hdlc_tx.len = -1;
return;
}
/*endif*/
if (len == -1)
{
/* A length of -1 means flush any buffered HDLC data */
s->t38_fe.hdlc_tx.len = 0;
s->t38_fe.hdlc_tx.ptr = 0;
return;
}
/*endif*/
if (s->t38_fe.us_per_tx_chunk)
s->t38_fe.hdlc_tx.extra_bits = extra_bits_in_stuffed_frame(msg, len);
/*endif*/
bit_reverse(s->t38_fe.hdlc_tx.buf, msg, len);
s->t38_fe.hdlc_tx.len = len;
s->t38_fe.hdlc_tx.ptr = 0;
}
/*- End of function --------------------------------------------------------*/
static __inline__ int bits_to_us(t38_terminal_state_t *s, int bits)
{
if (s->t38_fe.us_per_tx_chunk == 0 || s->t38_fe.tx_bit_rate == 0)
return 0;
/*endif*/
return bits*1000000/s->t38_fe.tx_bit_rate;
}
/*- End of function --------------------------------------------------------*/
static void set_octets_per_data_packet(t38_terminal_state_t *s, int bit_rate)
{
s->t38_fe.tx_bit_rate = bit_rate;
if (s->t38_fe.us_per_tx_chunk)
{
s->t38_fe.octets_per_data_packet = (s->t38_fe.us_per_tx_chunk/1000)*bit_rate/(8*1000);
/* Make sure we have a positive number (i.e. we didn't truncate to zero). */
if (s->t38_fe.octets_per_data_packet < 1)
s->t38_fe.octets_per_data_packet = 1;
/*endif*/
}
else
{
s->t38_fe.octets_per_data_packet = MAX_OCTETS_PER_UNPACED_CHUNK;
}
/*endif*/
}
/*- End of function --------------------------------------------------------*/
static int set_no_signal(t38_terminal_state_t *s)
{
int delay;
if ((s->t38_fe.chunking_modes & T38_CHUNKING_SEND_REGULAR_INDICATORS))
{
if ((delay = t38_core_send_indicator(&s->t38_fe.t38, 0x100 | T38_IND_NO_SIGNAL)) < 0)
return delay;
/*endif*/
s->t38_fe.timed_step = T38_TIMED_STEP_NO_SIGNAL;
if ((s->t38_fe.chunking_modes & T38_CHUNKING_SEND_2S_REGULAR_INDICATORS))
s->t38_fe.timeout_tx_samples = s->t38_fe.next_tx_samples + us_to_samples(2000000);
else
s->t38_fe.timeout_tx_samples = 0;
/*endif*/
return s->t38_fe.us_per_tx_chunk;
}
/*endif*/
if ((delay = t38_core_send_indicator(&s->t38_fe.t38, T38_IND_NO_SIGNAL)) < 0)
return delay;
/*endif*/
s->t38_fe.timed_step = T38_TIMED_STEP_NONE;
return delay;
}
/*- End of function --------------------------------------------------------*/
static int stream_no_signal(t38_terminal_state_t *s)
{
int delay;
if ((delay = t38_core_send_indicator(&s->t38_fe.t38, 0x100 | T38_IND_NO_SIGNAL)) < 0)
return delay;
/*endif*/
if (s->t38_fe.timeout_tx_samples && s->t38_fe.next_tx_samples >= s->t38_fe.timeout_tx_samples)
s->t38_fe.timed_step = T38_TIMED_STEP_NONE;
/*endif*/
return s->t38_fe.us_per_tx_chunk;
}
/*- End of function --------------------------------------------------------*/
static int stream_non_ecm(t38_terminal_state_t *s)
{
t38_terminal_front_end_state_t *fe;
uint8_t buf[MAX_OCTETS_PER_UNPACED_CHUNK + 50];
int res;
int delay;
int len;
fe = &s->t38_fe;
for (delay = 0; delay == 0; )
{
switch (fe->timed_step)
{
case T38_TIMED_STEP_NON_ECM_MODEM:
/* Create a 75ms silence */
if (fe->t38.current_tx_indicator != T38_IND_NO_SIGNAL)
{
if ((delay = t38_core_send_indicator(&fe->t38, T38_IND_NO_SIGNAL)) < 0)
return delay;
/*endif*/
}
else
{
if (fe->us_per_tx_chunk)
delay = 75000;
/*endif*/
}
/*endif*/
fe->timed_step = T38_TIMED_STEP_NON_ECM_MODEM_2;
fe->timeout_tx_samples = fe->next_tx_samples
+ us_to_samples(t38_core_send_training_delay(&fe->t38, fe->next_tx_indicator));
fe->next_tx_samples = fe->samples;
break;
case T38_TIMED_STEP_NON_ECM_MODEM_2:
/* Switch on a fast modem, and give the training time to complete */
if ((fe->chunking_modes & T38_CHUNKING_SEND_REGULAR_INDICATORS))
{
if ((delay = t38_core_send_indicator(&fe->t38, 0x100 | fe->next_tx_indicator)) < 0)
return delay;
/*endif*/
if (fe->next_tx_samples >= fe->timeout_tx_samples)
fe->timed_step = T38_TIMED_STEP_NON_ECM_MODEM_3;
/*endif*/
return fe->us_per_tx_chunk;
}
/*endif*/
if ((delay = t38_core_send_indicator(&fe->t38, fe->next_tx_indicator)) < 0)
return delay;
/*endif*/
fe->timed_step = T38_TIMED_STEP_NON_ECM_MODEM_3;
break;
case T38_TIMED_STEP_NON_ECM_MODEM_3:
/* Send a chunk of non-ECM image data */
/* T.38 says it is OK to send the last of the non-ECM data in the signal end message.
However, I think the early versions of T.38 said the signal end message should not
contain data. Hopefully, following the current spec will not cause compatibility
issues. */
len = t30_non_ecm_get(&s->t30, buf, fe->octets_per_data_packet);
if (len < 0)
return -1;
/*endif*/
if (len > 0)
bit_reverse(buf, buf, len);
/*endif*/
if (len < fe->octets_per_data_packet)
{
/* That's the end of the image data. */
if (fe->us_per_tx_chunk)
{
/* Pad the end of the data with some zeros. If we just stop abruptly
at the end of the EOLs, some ATAs fail to clean up properly before
shutting down their transmit modem, and the last few rows of the image
are lost or corrupted. Simply delaying the no-signal message does not
help for all implentations. It is usually ignored, which is probably
the right thing to do after receiving a message saying the signal has
ended. */
memset(buf + len, 0, fe->octets_per_data_packet - len);
fe->non_ecm_trailer_bytes = 3*fe->octets_per_data_packet + len;
len = fe->octets_per_data_packet;
fe->timed_step = T38_TIMED_STEP_NON_ECM_MODEM_4;
}
else
{
/* If we are sending quickly there seems no point in doing any padding */
if ((res = t38_core_send_data(&fe->t38, fe->current_tx_data_type, T38_FIELD_T4_NON_ECM_SIG_END, buf, len, T38_PACKET_CATEGORY_IMAGE_DATA_END)) < 0)
return res;
/*endif*/
fe->timed_step = T38_TIMED_STEP_NON_ECM_MODEM_5;
if (front_end_status(s, T30_FRONT_END_SEND_STEP_COMPLETE) < 0)
return -1;
/*endif*/
break;
}
/*endif*/
}
/*endif*/
if ((res = t38_core_send_data(&fe->t38, fe->current_tx_data_type, T38_FIELD_T4_NON_ECM_DATA, buf, len, T38_PACKET_CATEGORY_IMAGE_DATA)) < 0)
return res;
/*endif*/
if (fe->us_per_tx_chunk)
delay = bits_to_us(s, 8*len);
/*endif*/
break;
case T38_TIMED_STEP_NON_ECM_MODEM_4:
/* Send padding */
len = fe->octets_per_data_packet;
fe->non_ecm_trailer_bytes -= fe->octets_per_data_packet;
if (fe->non_ecm_trailer_bytes <= 0)
{
len += fe->non_ecm_trailer_bytes;
memset(buf, 0, len);
if ((res = t38_core_send_data(&fe->t38, fe->current_tx_data_type, T38_FIELD_T4_NON_ECM_SIG_END, buf, len, T38_PACKET_CATEGORY_IMAGE_DATA_END)) < 0)
return res;
/*endif*/
fe->timed_step = T38_TIMED_STEP_NON_ECM_MODEM_5;
/* Allow a bit more time than the data will take to play out, to ensure the far ATA does not
cut things short. */
if (fe->us_per_tx_chunk)
delay = bits_to_us(s, 8*len) + 60000;
/*endif*/
if (front_end_status(s, T30_FRONT_END_SEND_STEP_COMPLETE) < 0)
return -1;
/*endif*/
break;
}
/*endif*/
memset(buf, 0, len);
if ((res = t38_core_send_data(&fe->t38, fe->current_tx_data_type, T38_FIELD_T4_NON_ECM_DATA, buf, len, T38_PACKET_CATEGORY_IMAGE_DATA)) < 0)
return res;
/*endif*/
if (fe->us_per_tx_chunk)
delay = bits_to_us(s, 8*len);
/*endif*/
break;
case T38_TIMED_STEP_NON_ECM_MODEM_5:
/* This should not be needed, since the message above indicates the end of the signal, but it
seems like it can improve compatibility with quirky implementations. */
delay = set_no_signal(s);
if (fe->queued_timed_step != T38_TIMED_STEP_NONE)
{
fe->timed_step = fe->queued_timed_step;
fe->queued_timed_step = T38_TIMED_STEP_NONE;
}
else
{
fe->timed_step = T38_TIMED_STEP_NONE;
}
/*endif*/
return delay;
}
/*endswitch*/
}
/*endfor*/
return delay;
}
/*- End of function --------------------------------------------------------*/
static int stream_hdlc(t38_terminal_state_t *s)
{
t38_terminal_front_end_state_t *fe;
uint8_t buf[MAX_OCTETS_PER_UNPACED_CHUNK + 50];
t38_data_field_t data_fields[2];
int category;
int previous;
int res;
int delay;
int i;
fe = &s->t38_fe;
for (delay = 0; delay == 0; )
{
switch (fe->timed_step)
{
case T38_TIMED_STEP_HDLC_MODEM:
/* Create a 75ms silence */
if (fe->t38.current_tx_indicator != T38_IND_NO_SIGNAL)
{
if ((delay = t38_core_send_indicator(&fe->t38, T38_IND_NO_SIGNAL)) < 0)
return delay;
/*endif*/
}
else
{
delay = (fe->us_per_tx_chunk) ? 75000 : 0;
}
/*endif*/
fe->timed_step = T38_TIMED_STEP_HDLC_MODEM_2;
fe->timeout_tx_samples = fe->next_tx_samples
+ us_to_samples(t38_core_send_training_delay(&fe->t38, fe->next_tx_indicator))
+ us_to_samples(t38_core_send_flags_delay(&fe->t38, fe->next_tx_indicator))
+ us_to_samples(delay);
fe->next_tx_samples = fe->samples;
break;
case T38_TIMED_STEP_HDLC_MODEM_2:
/* Send HDLC preambling */
if ((fe->chunking_modes & T38_CHUNKING_SEND_REGULAR_INDICATORS))
{
if ((delay = t38_core_send_indicator(&fe->t38, 0x100 | fe->next_tx_indicator)) < 0)
return delay;
/*endif*/
if (fe->next_tx_samples >= fe->timeout_tx_samples)
fe->timed_step = T38_TIMED_STEP_HDLC_MODEM_3;
/*endif*/
return fe->us_per_tx_chunk;
}
/*endif*/
if ((delay = t38_core_send_indicator(&fe->t38, fe->next_tx_indicator)) < 0)
return delay;
/*endif*/
delay += t38_core_send_flags_delay(&fe->t38, fe->next_tx_indicator);
fe->timed_step = T38_TIMED_STEP_HDLC_MODEM_3;
break;
case T38_TIMED_STEP_HDLC_MODEM_3:
/* Send a chunk of HDLC data */
i = fe->hdlc_tx.len - fe->hdlc_tx.ptr;
if (fe->octets_per_data_packet >= i)
{
/* The last part of an HDLC frame */
if ((fe->chunking_modes & T38_CHUNKING_MERGE_FCS_WITH_DATA))
{
/* Copy the data, as we might be about to refill the buffer it is in */
memcpy(buf, &fe->hdlc_tx.buf[fe->hdlc_tx.ptr], i);
data_fields[0].field_type = T38_FIELD_HDLC_DATA;
data_fields[0].field = buf;
data_fields[0].field_len = i;
/* Now see about the next HDLC frame. This will tell us whether to send FCS_OK or FCS_OK_SIG_END */
fe->hdlc_tx.ptr = 0;
fe->hdlc_tx.len = 0;
if (front_end_status(s, T30_FRONT_END_SEND_STEP_COMPLETE) < 0)
return -1;
/*endif*/
/* The above step should have got the next HDLC step ready - either another frame, or an instruction to stop transmission. */
if (fe->hdlc_tx.len >= 0)
{
data_fields[1].field_type = T38_FIELD_HDLC_FCS_OK;
data_fields[1].field = NULL;
data_fields[1].field_len = 0;
category = (fe->current_tx_data_type == T38_DATA_V21) ? T38_PACKET_CATEGORY_CONTROL_DATA : T38_PACKET_CATEGORY_IMAGE_DATA;
if ((res = t38_core_send_data_multi_field(&fe->t38, fe->current_tx_data_type, data_fields, 2, category)) < 0)
return res;
/*endif*/
fe->timed_step = T38_TIMED_STEP_HDLC_MODEM_3;
delay = bits_to_us(s, i*8 + fe->hdlc_tx.extra_bits);
}
else
{
data_fields[1].field_type = T38_FIELD_HDLC_FCS_OK_SIG_END;
data_fields[1].field = NULL;
data_fields[1].field_len = 0;
category = (fe->current_tx_data_type == T38_DATA_V21) ? T38_PACKET_CATEGORY_CONTROL_DATA_END : T38_PACKET_CATEGORY_IMAGE_DATA_END;
if ((res = t38_core_send_data_multi_field(&fe->t38, fe->current_tx_data_type, data_fields, 2, category)) < 0)
return res;
/*endif*/
fe->timed_step = T38_TIMED_STEP_HDLC_MODEM_5;
/* We add a bit of extra time here, as with some implementations
the carrier falling too abruptly causes data loss. */
delay = bits_to_us(s, i*8 + fe->hdlc_tx.extra_bits);
if (fe->us_per_tx_chunk)
delay += 100000;
/*endif*/
if (front_end_status(s, T30_FRONT_END_SEND_STEP_COMPLETE) < 0)
return -1;
/*endif*/
}
/*endif*/
break;
}
/*endif*/
category = (fe->current_tx_data_type == T38_DATA_V21) ? T38_PACKET_CATEGORY_CONTROL_DATA : T38_PACKET_CATEGORY_IMAGE_DATA;
if ((res = t38_core_send_data(&fe->t38, fe->current_tx_data_type, T38_FIELD_HDLC_DATA, &fe->hdlc_tx.buf[fe->hdlc_tx.ptr], i, category)) < 0)
return res;
/*endif*/
fe->timed_step = T38_TIMED_STEP_HDLC_MODEM_4;
}
else
{
i = fe->octets_per_data_packet;
category = (fe->current_tx_data_type == T38_DATA_V21) ? T38_PACKET_CATEGORY_CONTROL_DATA : T38_PACKET_CATEGORY_IMAGE_DATA;
if ((res = t38_core_send_data(&fe->t38, fe->current_tx_data_type, T38_FIELD_HDLC_DATA, &fe->hdlc_tx.buf[fe->hdlc_tx.ptr], i, category)) < 0)
return res;
/*endif*/
fe->hdlc_tx.ptr += i;
}
/*endif*/
delay = bits_to_us(s, i*8);
break;
case T38_TIMED_STEP_HDLC_MODEM_4:
/* End of HDLC frame */
previous = fe->current_tx_data_type;
fe->hdlc_tx.ptr = 0;
fe->hdlc_tx.len = 0;
if (front_end_status(s, T30_FRONT_END_SEND_STEP_COMPLETE) < 0)
return -1;
/*endif*/
/* The above step should have got the next HDLC step ready - either another frame, or an instruction to stop transmission. */
if (fe->hdlc_tx.len >= 0)
{
if (fe->hdlc_tx.len == 0)
{
/* Now, how did we get here? We have finished a frame, but have no new frame to
send, and no end of transmission condition. */
span_log(&s->logging, SPAN_LOG_FLOW, "No new frame or end transmission condition.\n");
}
/*endif*/
/* Finish the current frame off, and prepare for the next one. */
category = (fe->current_tx_data_type == T38_DATA_V21) ? T38_PACKET_CATEGORY_CONTROL_DATA : T38_PACKET_CATEGORY_IMAGE_DATA;
if ((res = t38_core_send_data(&fe->t38, previous, T38_FIELD_HDLC_FCS_OK, NULL, 0, category)) < 0)
return res;
/*endif*/
fe->timed_step = T38_TIMED_STEP_HDLC_MODEM_3;
/* We should now wait enough time for everything to clear through an analogue modem at the far end. */
delay = bits_to_us(s, fe->hdlc_tx.extra_bits);
}
else
{
/* End of transmission */
category = (fe->current_tx_data_type == T38_DATA_V21) ? T38_PACKET_CATEGORY_CONTROL_DATA_END : T38_PACKET_CATEGORY_IMAGE_DATA_END;
if ((res = t38_core_send_data(&fe->t38, previous, T38_FIELD_HDLC_FCS_OK_SIG_END, NULL, 0, category)) < 0)
return res;
/*endif*/
fe->timed_step = T38_TIMED_STEP_HDLC_MODEM_5;
/* We add a bit of extra time here, as with some implementations
the carrier falling too abruptly causes data loss. */
delay = bits_to_us(s, fe->hdlc_tx.extra_bits);
if (fe->us_per_tx_chunk)
delay += 100000;
/*endif*/
if (front_end_status(s, T30_FRONT_END_SEND_STEP_COMPLETE) < 0)
return -1;
/*endif*/
}
/*endif*/
break;
case T38_TIMED_STEP_HDLC_MODEM_5:
/* Note that some boxes do not like us sending a T38_FIELD_HDLC_SIG_END at this point.
A T38_IND_NO_SIGNAL should always be OK. */
delay = set_no_signal(s);
if (fe->queued_timed_step != T38_TIMED_STEP_NONE)
{
fe->timed_step = fe->queued_timed_step;
fe->queued_timed_step = T38_TIMED_STEP_NONE;
}
else
{
fe->timed_step = T38_TIMED_STEP_NONE;
}
/*endif*/
return delay;
}
/*endswitch*/
}
/*endfor*/
return delay;
}
/*- End of function --------------------------------------------------------*/
static int stream_ced(t38_terminal_state_t *s)
{
t38_terminal_front_end_state_t *fe;
int delay;
fe = &s->t38_fe;
for (delay = 0; delay == 0; )
{
switch (fe->timed_step)
{
case T38_TIMED_STEP_CED:
/* It seems common practice to start with a no signal indicator, though
this is not a specified requirement. Since we should be sending 200ms
of silence, starting the delay with a no signal indication makes sense.
We do need a 200ms delay, as that is a specification requirement. */
fe->timed_step = T38_TIMED_STEP_CED_2;
if ((delay = t38_core_send_indicator(&fe->t38, T38_IND_NO_SIGNAL)) < 0)
return delay;
/*endif*/
delay = (fe->us_per_tx_chunk) ? 200000 : 0;
fe->next_tx_samples = fe->samples;
break;
case T38_TIMED_STEP_CED_2:
/* Initial 200ms delay over. Send the CED indicator */
fe->timed_step = T38_TIMED_STEP_CED_3;
if ((delay = t38_core_send_indicator(&fe->t38, T38_IND_CED)) < 0)
return delay;
/*endif*/
fe->current_tx_data_type = T38_DATA_NONE;
break;
case T38_TIMED_STEP_CED_3:
/* End of CED */
fe->timed_step = fe->queued_timed_step;
if (front_end_status(s, T30_FRONT_END_SEND_STEP_COMPLETE) < 0)
return -1;
/*endif*/
return 0;
}
/*endswitch*/
}
/*endfor*/
return delay;
}
/*- End of function --------------------------------------------------------*/
static int stream_cng(t38_terminal_state_t *s)
{
t38_terminal_front_end_state_t *fe;
int delay;
fe = &s->t38_fe;
for (delay = 0; delay == 0; )
{
switch (fe->timed_step)
{
case T38_TIMED_STEP_CNG:
/* It seems common practice to start with a no signal indicator, though
this is not a specified requirement of the T.38 spec. Since we should
be sending 200ms of silence, according to T.30, starting that delay with
a no signal indication makes sense. */
fe->timed_step = T38_TIMED_STEP_CNG_2;
if ((delay = t38_core_send_indicator(&fe->t38, T38_IND_NO_SIGNAL)) < 0)
return delay;
/*endif*/
delay = (fe->us_per_tx_chunk) ? 200000 : 0;
fe->next_tx_samples = fe->samples;
break;
case T38_TIMED_STEP_CNG_2:
/* Initial short delay over. Send the CNG indicator. CNG persists until something
coming the other way interrupts it, or a long timeout controlled by the T.30 engine
expires. */
delay = t38_core_send_indicator(&fe->t38, T38_IND_CNG);
fe->timed_step = fe->queued_timed_step;
fe->current_tx_data_type = T38_DATA_NONE;
return delay;
}
/*endswitch*/
}
/*endfor*/
return delay;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(int) t38_terminal_send_timeout(t38_terminal_state_t *s, int samples)
{
t38_terminal_front_end_state_t *fe;
int delay;
fe = &s->t38_fe;
if (fe->current_rx_type == T30_MODEM_DONE || fe->current_tx_type == T30_MODEM_DONE)
return true;
/*endif*/
fe->samples += samples;
t30_timer_update(&s->t30, samples);
if (fe->timeout_rx_samples && fe->samples > fe->timeout_rx_samples)
{
span_log(&s->logging, SPAN_LOG_FLOW, "Timeout mid-receive\n");
fe->timeout_rx_samples = 0;
front_end_status(s, T30_FRONT_END_RECEIVE_COMPLETE);
}
/*endif*/
if (fe->timed_step == T38_TIMED_STEP_NONE)
return false;
/*endif*/
/* Wait until the right time comes along, unless we are working in "no delays" mode, while talking to an
IAF terminal. */
if (fe->us_per_tx_chunk && fe->samples < fe->next_tx_samples)
return false;
/*endif*/
/* Its time to send something */
delay = 0;
switch ((fe->timed_step & 0xFFF0))
{
case T38_TIMED_STEP_NON_ECM_MODEM:
delay = stream_non_ecm(s);
break;
case T38_TIMED_STEP_HDLC_MODEM:
delay = stream_hdlc(s);
break;
case T38_TIMED_STEP_CED:
delay = stream_ced(s);
break;
case T38_TIMED_STEP_CNG:
delay = stream_cng(s);
break;
case T38_TIMED_STEP_PAUSE:
/* End of timed pause */
fe->timed_step = T38_TIMED_STEP_NONE;
front_end_status(s, T30_FRONT_END_SEND_STEP_COMPLETE);
break;
case T38_TIMED_STEP_NO_SIGNAL:
delay = stream_no_signal(s);
break;
}
/*endswitch*/
if (delay < 0)
{
t30_terminate(&s->t30);
return true;
}
/*endif*/
fe->next_tx_samples += us_to_samples(delay);
return false;
}
/*- End of function --------------------------------------------------------*/
static void set_rx_type(void *user_data, int type, int bit_rate, int short_train, int use_hdlc)
{
t38_terminal_state_t *s;
s = (t38_terminal_state_t *) user_data;
span_log(&s->logging, SPAN_LOG_FLOW, "Set rx type %d\n", type);
s->t38_fe.current_rx_type = type;
}
/*- End of function --------------------------------------------------------*/
static void start_tx(t38_terminal_front_end_state_t *fe, int use_hdlc)
{
int step;
/* The actual transmission process depends on whether we are sending at a paced manner,
for interaction with a traditional FAX machine, or streaming as fast as we can, normally
over a TCP connection to a machine directly connected to the internet. */
step = (use_hdlc) ? T38_TIMED_STEP_HDLC_MODEM : T38_TIMED_STEP_NON_ECM_MODEM;
if (fe->timed_step == T38_TIMED_STEP_NONE)
{
fe->queued_timed_step = T38_TIMED_STEP_NONE;
fe->timed_step = step;
}
else
{
fe->queued_timed_step = step;
}
/*endif*/
if (fe->next_tx_samples < fe->samples)
fe->next_tx_samples = fe->samples;
/*endif*/
}
/*- End of function --------------------------------------------------------*/
static void set_tx_type(void *user_data, int type, int bit_rate, int short_train, int use_hdlc)
{
t38_terminal_state_t *s;
t38_terminal_front_end_state_t *fe;
s = (t38_terminal_state_t *) user_data;
fe = &s->t38_fe;
span_log(&s->logging, SPAN_LOG_FLOW, "Set tx type %d\n", type);
if (fe->current_tx_type == type)
return;
/*endif*/
set_octets_per_data_packet(s, bit_rate);
switch (type)
{
case T30_MODEM_NONE:
/* If a "no signal" indicator is waiting to be played out, don't disturb it. */
if (fe->timed_step != T38_TIMED_STEP_NON_ECM_MODEM_5 && fe->timed_step != T38_TIMED_STEP_HDLC_MODEM_5)
fe->timed_step = T38_TIMED_STEP_NONE;
/*endif*/
fe->current_tx_data_type = T38_DATA_NONE;
break;
case T30_MODEM_PAUSE:
if (s->t38_fe.us_per_tx_chunk)
fe->next_tx_samples = fe->samples + ms_to_samples(short_train);
else
fe->next_tx_samples = fe->samples;
/*endif*/
if (fe->timed_step == T38_TIMED_STEP_NONE)
{
fe->queued_timed_step = T38_TIMED_STEP_NONE;
fe->timed_step = T38_TIMED_STEP_PAUSE;
}
else
{
fe->queued_timed_step = T38_TIMED_STEP_PAUSE;
}
/*endif*/
fe->current_tx_data_type = T38_DATA_NONE;
break;
case T30_MODEM_CED:
fe->next_tx_samples = fe->samples;
fe->timed_step = T38_TIMED_STEP_CED;
fe->current_tx_data_type = T38_DATA_NONE;
break;
case T30_MODEM_CNG:
fe->next_tx_samples = fe->samples;
fe->timed_step = T38_TIMED_STEP_CNG;
fe->current_tx_data_type = T38_DATA_NONE;
break;
case T30_MODEM_V21:
fe->next_tx_indicator = T38_IND_V21_PREAMBLE;
fe->current_tx_data_type = T38_DATA_V21;
start_tx(fe, use_hdlc);
break;
case T30_MODEM_V27TER:
switch (bit_rate)
{
case 2400:
fe->next_tx_indicator = T38_IND_V27TER_2400_TRAINING;
fe->current_tx_data_type = T38_DATA_V27TER_2400;
break;
case 4800:
fe->next_tx_indicator = T38_IND_V27TER_4800_TRAINING;
fe->current_tx_data_type = T38_DATA_V27TER_4800;
break;
}
/*endswitch*/
start_tx(fe, use_hdlc);
break;
case T30_MODEM_V29:
switch (bit_rate)
{
case 7200:
fe->next_tx_indicator = T38_IND_V29_7200_TRAINING;
fe->current_tx_data_type = T38_DATA_V29_7200;
break;
case 9600:
fe->next_tx_indicator = T38_IND_V29_9600_TRAINING;
fe->current_tx_data_type = T38_DATA_V29_9600;
break;
}
/*endswitch*/
start_tx(fe, use_hdlc);
break;
case T30_MODEM_V17:
switch (bit_rate)
{
case 7200:
fe->next_tx_indicator = (short_train) ? T38_IND_V17_7200_SHORT_TRAINING : T38_IND_V17_7200_LONG_TRAINING;
fe->current_tx_data_type = T38_DATA_V17_7200;
break;
case 9600:
fe->next_tx_indicator = (short_train) ? T38_IND_V17_9600_SHORT_TRAINING : T38_IND_V17_9600_LONG_TRAINING;
fe->current_tx_data_type = T38_DATA_V17_9600;
break;
case 12000:
fe->next_tx_indicator = (short_train) ? T38_IND_V17_12000_SHORT_TRAINING : T38_IND_V17_12000_LONG_TRAINING;
fe->current_tx_data_type = T38_DATA_V17_12000;
break;
case 14400:
fe->next_tx_indicator = (short_train) ? T38_IND_V17_14400_SHORT_TRAINING : T38_IND_V17_14400_LONG_TRAINING;
fe->current_tx_data_type = T38_DATA_V17_14400;
break;
}
/*endswitch*/
start_tx(fe, use_hdlc);
break;
case T30_MODEM_DONE:
span_log(&s->logging, SPAN_LOG_FLOW, "FAX exchange complete\n");
fe->timed_step = T38_TIMED_STEP_NONE;
fe->current_tx_data_type = T38_DATA_NONE;
break;
}
/*endswitch*/
fe->current_tx_type = type;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(void) t38_terminal_set_config(t38_terminal_state_t *s, int config)
{
if ((config & T38_TERMINAL_OPTION_NO_PACING))
{
/* Continuous streaming mode, as used for TPKT over TCP transport */
t38_set_pace_transmission(&s->t38_fe.t38, false);
s->t38_fe.hdlc_tx.extra_bits = 0;
if ((config & T38_TERMINAL_OPTION_NO_INDICATORS))
t38_set_redundancy_control(&s->t38_fe.t38, T38_PACKET_CATEGORY_INDICATOR, 0);
else
t38_set_redundancy_control(&s->t38_fe.t38, T38_PACKET_CATEGORY_INDICATOR, 1);
/*endif*/
t38_set_redundancy_control(&s->t38_fe.t38, T38_PACKET_CATEGORY_CONTROL_DATA, 1);
t38_set_redundancy_control(&s->t38_fe.t38, T38_PACKET_CATEGORY_CONTROL_DATA_END, 1);
t38_set_redundancy_control(&s->t38_fe.t38, T38_PACKET_CATEGORY_IMAGE_DATA, 1);
t38_set_redundancy_control(&s->t38_fe.t38, T38_PACKET_CATEGORY_IMAGE_DATA_END, 1);
s->t38_fe.us_per_tx_chunk = 0;
s->t38_fe.chunking_modes &= ~T38_CHUNKING_SEND_REGULAR_INDICATORS;
s->t38_fe.chunking_modes |= T38_CHUNKING_MERGE_FCS_WITH_DATA;
}
else
{
/* Paced streaming mode, as used for UDP transports */
t38_set_pace_transmission(&s->t38_fe.t38, true);
s->t38_fe.hdlc_tx.extra_bits = 0;
if ((config & T38_TERMINAL_OPTION_NO_INDICATORS))
t38_set_redundancy_control(&s->t38_fe.t38, T38_PACKET_CATEGORY_INDICATOR, 0);
else
t38_set_redundancy_control(&s->t38_fe.t38, T38_PACKET_CATEGORY_INDICATOR, INDICATOR_TX_COUNT);
/*endif*/
t38_set_redundancy_control(&s->t38_fe.t38, T38_PACKET_CATEGORY_CONTROL_DATA, DATA_TX_COUNT);
t38_set_redundancy_control(&s->t38_fe.t38, T38_PACKET_CATEGORY_CONTROL_DATA_END, DATA_END_TX_COUNT);
t38_set_redundancy_control(&s->t38_fe.t38, T38_PACKET_CATEGORY_IMAGE_DATA, DATA_TX_COUNT);
t38_set_redundancy_control(&s->t38_fe.t38, T38_PACKET_CATEGORY_IMAGE_DATA_END, DATA_END_TX_COUNT);
s->t38_fe.us_per_tx_chunk = DEFAULT_US_PER_TX_CHUNK;
if ((config & (T38_TERMINAL_OPTION_REGULAR_INDICATORS | T38_TERMINAL_OPTION_2S_REPEATING_INDICATORS)))
s->t38_fe.chunking_modes |= T38_CHUNKING_SEND_REGULAR_INDICATORS;
else
s->t38_fe.chunking_modes &= ~T38_CHUNKING_SEND_REGULAR_INDICATORS;
/*endif*/
if ((config & T38_TERMINAL_OPTION_2S_REPEATING_INDICATORS))
s->t38_fe.chunking_modes |= T38_CHUNKING_SEND_2S_REGULAR_INDICATORS;
else
s->t38_fe.chunking_modes &= ~T38_CHUNKING_SEND_2S_REGULAR_INDICATORS;
/*endif*/
}
/*endif*/
set_octets_per_data_packet(s, 300);
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(void) t38_terminal_set_tep_mode(t38_terminal_state_t *s, bool use_tep)
{
if (use_tep)
s->t38_fe.chunking_modes |= T38_CHUNKING_ALLOW_TEP_TIME;
else
s->t38_fe.chunking_modes &= ~T38_CHUNKING_ALLOW_TEP_TIME;
/*endif*/
t38_set_tep_handling(&s->t38_fe.t38, use_tep);
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(void) t38_terminal_set_fill_bit_removal(t38_terminal_state_t *s, bool remove)
{
if (remove)
s->t38_fe.iaf |= T30_IAF_MODE_NO_FILL_BITS;
else
s->t38_fe.iaf &= ~T30_IAF_MODE_NO_FILL_BITS;
/*endif*/
t30_set_iaf_mode(&s->t30, s->t38_fe.iaf);
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(t30_state_t *) t38_terminal_get_t30_state(t38_terminal_state_t *s)
{
return &s->t30;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(t38_core_state_t *) t38_terminal_get_t38_core_state(t38_terminal_state_t *s)
{
return &s->t38_fe.t38;
}
/*- End of function --------------------------------------------------------*/
static int t38_terminal_t38_fe_restart(t38_terminal_state_t *t)
{
t38_terminal_front_end_state_t *s;
s = &t->t38_fe;
t38_core_restart(&s->t38);
s->rx_signal_present = false;
s->timed_step = T38_TIMED_STEP_NONE;
//s->iaf = T30_IAF_MODE_T37 | T30_IAF_MODE_T38;
s->iaf = T30_IAF_MODE_T38;
s->current_tx_data_type = T38_DATA_NONE;
s->next_tx_samples = 0;
s->hdlc_tx.ptr = 0;
s->hdlc_tx.extra_bits = 0;
return 0;
}
/*- End of function --------------------------------------------------------*/
static int t38_terminal_t38_fe_init(t38_terminal_state_t *t,
t38_tx_packet_handler_t tx_packet_handler,
void *tx_packet_user_data)
{
t38_terminal_front_end_state_t *s;
s = &t->t38_fe;
t38_core_init(&s->t38,
process_rx_indicator,
process_rx_data,
process_rx_missing,
(void *) t,
tx_packet_handler,
tx_packet_user_data);
t38_set_fastest_image_data_rate(&s->t38, 14400);
s->rx_signal_present = false;
s->timed_step = T38_TIMED_STEP_NONE;
s->queued_timed_step = T38_TIMED_STEP_NONE;
//s->iaf = T30_IAF_MODE_T37 | T30_IAF_MODE_T38;
s->iaf = T30_IAF_MODE_T38;
s->current_tx_data_type = T38_DATA_NONE;
s->next_tx_samples = 0;
s->chunking_modes = T38_CHUNKING_ALLOW_TEP_TIME;
s->hdlc_tx.ptr = 0;
s->hdlc_tx.extra_bits = 0;
return 0;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(logging_state_t *) t38_terminal_get_logging_state(t38_terminal_state_t *s)
{
return &s->logging;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(int) t38_terminal_restart(t38_terminal_state_t *s,
bool calling_party)
{
t38_terminal_t38_fe_restart(s);
t30_restart(&s->t30);
return 0;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(t38_terminal_state_t *) t38_terminal_init(t38_terminal_state_t *s,
bool calling_party,
t38_tx_packet_handler_t tx_packet_handler,
void *tx_packet_user_data)
{
if (tx_packet_handler == NULL)
return NULL;
/*endif*/
if (s == NULL)
{
if ((s = (t38_terminal_state_t *) span_alloc(sizeof(*s))) == NULL)
return NULL;
/*endif*/
}
/*endif*/
memset(s, 0, sizeof(*s));
span_log_init(&s->logging, SPAN_LOG_NONE, NULL);
span_log_set_protocol(&s->logging, "T.38T");
t38_terminal_t38_fe_init(s, tx_packet_handler, tx_packet_user_data);
t38_terminal_set_config(s, 0);
t30_init(&s->t30,
calling_party,
set_rx_type,
(void *) s,
set_tx_type,
(void *) s,
send_hdlc,
(void *) s);
t30_set_iaf_mode(&s->t30, s->t38_fe.iaf);
t30_set_supported_modems(&s->t30,
T30_SUPPORT_V27TER | T30_SUPPORT_V29 | T30_SUPPORT_V17 | T30_SUPPORT_IAF);
t30_restart(&s->t30);
return s;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(int) t38_terminal_release(t38_terminal_state_t *s)
{
t30_release(&s->t30);
return 0;
}
/*- End of function --------------------------------------------------------*/
SPAN_DECLARE(int) t38_terminal_free(t38_terminal_state_t *s)
{
t38_terminal_release(s);
span_free(s);
return 0;
}
/*- End of function --------------------------------------------------------*/
/*- End of file ------------------------------------------------------------*/
View Git Blame Copy Permalink