freeswitch/conf/config.FS0

79 lines
2.2 KiB
Plaintext

CountryCode: 1
AreaCode: 800
FAXNumber: +1.800.555.1212
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules: etc/dialrules
ServerTracing: 0xFFF
SessionTracing: 0xFFF
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "FS"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 200
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use this to supply a hint
#
# Enabling this will use the hfaxd-protocol to set Caller*ID
#
#ModemSetOriginCmd: AT+VSID="%s","%d"
#
# If "glare" during initialization becomes a problem then take
# the modem off-hook during initialization, and then place it
# back on-hook when done.
#
#ModemResetCmds: "ATH1\nAT+VCID=1" # enables CallID display
#ModemReadyCmds: ATH0
Class1AdaptRecvCmd: AT+FAR=1
Class1TMConnectDelay: 400 # counteract quick CONNECT response
#
# If you have trouble with V.17 receiving or sending,
# you may want to enable one of these, respectively.
#
#Class1RMQueryCmd: "!24,48,72,96" # enable this to disable V.17 receiving
#Class1TMQueryCmd: "!24,48,72,96" # enable this to disable V.17 sending
#
# You'll likely want Caller*ID display (also displays DID) enabled.
#
ModemResetCmds: AT+VCID=1 # enables CallID display
#
# The pty does not support changing parity.
#
PagerTTYParity: none
#
# If you are "missing" Caller*ID data on some calls (but not all)
# and if you do not have adequate glare protection you may want to
# not answer based on RINGs, but rather enable the CallIDAnswerLength
# for NDID, disable AT+VCID=1 and do this:
#
#RingsBeforeAnswer: 0
#ModemRingResponse: AT+VRID=1
# Uncomment DATE and TIME if you really want them, but you probably don't.
#CallIDPattern: "DATE="
#CallIDPattern: "TIME="
CallIDPattern: "NMBR="
CallIDPattern: "NAME="
CallIDPattern: "ANID="
#CallIDPattern: "USER=" # username provided by call
#CallIDPattern: "PASS=" # password provided by call
#CallIDPattern: "CDID=" # DID context in call
CallIDPattern: "NDID="
#CallIDAnswerLength: 4