This changes the core to have the necessary tools to create
a speech detection interface.
It also changes the code in javascript (mod_spidermonkey)
there are a few api changes in how it handles callbacks
It also adds grammars as a system dir to store asr grammars
git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3291 d0543943-73ff-0310-b7d9-9358b9ac24b2
This modification makes it possible to change the media path of session in the switch on-the-fly and from the dialplan.
It adds some API interface calls usable from a remote client such as mod_event_socket or the test console.
1) media [off] <uuid>
Turns on/off the media on the call described by <uuid>
The media will be redirected as desiered either into the switch or point to point.
2) hold [off] <uuid>
Turns on/off endpoint specific hold state on the session described by <uuid>
3) broadcast <uuid> "<path>[ <timer_name>]" or "speak:<tts_engine>|<tts_voice>|<text>[|<timer_name>]" [both]
A message will be sent to the call described by uuid instructing it to play the file or speak the text indicated.
If the 'both' option is specified both ends of the call will hear the message otherwise just the uuid specified
will hear the message.
During playback when only one side is hearing the message the other end will hear silence.
If media is not flowing across the switch when the message is broadcasted, the media will be directed to the
switch for the duration of the call and then returned to it's previous state.
Also the no_media=true option in the dialplan before a bridge makes it possible to place a call while proxying the session
description from one endpoint to the other and establishing an immidiate point-to-point media connection with no media
on the switch.
<action application="set" data="no_media=true"/>
<action application="bridge" data="sofia/mydomain.com/myid@myhost.com"/>
*NOTE* when connecting two outbound legs by using the "originate" api command with an extension that has no_media=true enabled,
the media for the first leg will be engaged with the switch until the second leg has answered and the other session description
is available to establish a point to point connection at which time point-to-point mode will be enabled.
*NOTE* it is reccommended you rebuild FreeSWITCH with "make sure" as there have been some changes to the core.
git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3245 d0543943-73ff-0310-b7d9-9358b9ac24b2
adding mod_park for putting channels in limbo state for remote control.
adding stuff to mod_event_socket to let you do the bgapi <command> <args>
this will let you execute a job in the bg and the result will be sent as an event with an
indicated uuid to match the reply to the command
adding switch_core_port_allocator (to be used soon)
adding "make sure" to do a full rebild of the freeswitch object files
There will be more to this committed as the week progresses
make sure you do a rebuild after this update or you'll be sowwie
./configure && make sure
git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@2540 d0543943-73ff-0310-b7d9-9358b9ac24b2
Ok,
This one adds a bunch of stuff on top of the framework restructuring from yesterday.
1) originate api function:
Usage: originate <call url> <exten> [<dialplan>] [<context>] [<cid_name>] [<cid_num>] [<timeout_sec>]
This will call the specified url then transfer the call to the specified extension
example: originate exosip/1000@somehost 1000 XML default
2) mutiple destinations in outbound calls:
This means any dialstring may contain an '&' separated list of call urls
When using mutiple urls in this manner it is possible to map a certian key as required
indication of an accepted call. You may also supply a filename to play possibly instructing the
call recipiant to press the desired key etc...
The example below will call 2 locations playing prompt.wav to any who answer and
completing the call to the first offhook recipiant to dial "4"
<extension name="3002">
<condition field="destination_number" expression="^3002$">
<action application="set" data="call_timeout=60"/>
<action application="set" data="group_confirm_file=/path/to/prompt.wav"/>
<action application="set" data="group_confirm_key=4"/>
<action application="bridge" data="iax/guest@somebox/1234&exosip/1000@somehost"/>
</condition>
</extension>
The following is the equivilant but the confirm data is passed vial the bridge parameters
(This is for situations where there is no originating channel to set variables to)
<extension name="3002">
<condition field="destination_number" expression="^3002$">
<action application="bridge" data=/path/to/prompt.wav:4"confirm=iax/guest@somebox/1234&exosip/1000@somehost"/>
</condition>
</extension>
Omitting the file and key stuff will simply comeplete the call to whoever answers first.
(this is similar to how other less fortunate software handles the situation with thier best effort.)
This logic should be permitted in anything that establishes an outgoing call with
switch_ivr_originate()
Yes! That means even in this new originate api command you can call mutiple targets and send
whoever answers first to an extension that calls more mutiple targets. (better test it though!)
Oh, and you should be able to do the same in the mod_conference dial and dynamic conference features
please report any behaviour contrary to this account to me ASAP cos i would not be terribly
suprised if I forgot some scenerio that causes an explosion I did all this in 1 afternoon so it probably needs tuning still.
git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@2311 d0543943-73ff-0310-b7d9-9358b9ac24b2
BTW, forget what I said yesterday RE: the strftime app I was at McDonalds, how can I concentrate there eh?
see below....
The Definitive Guide To XML Dialplan:
The "dialplan" section of the freeswitch.xml meta document may contain several contexts
<?xml version="1.0"?>
<document type="freeswitch/xml">
<section name="dialplan" description="Regex/XML Dialplan">
<!-- the default context is a safe start -->
<context name="default">
<!-- one or more extension tags -->
</context>
<!-- more optional contexts -->
</section>
</document>
The important thing to remember is that the dialplan is parsed once when the call
hits the dialplan parser in the RING state. With one pass across the XML the result
will be a complete list of instructions installed into the channel based on
parsed <action> or <anti-action> tags.
Those accustomed to Asterisk may expect the call to follow the dialplan by executing the
applications as it parses them allowing data obtained from one action to influence the next action.
This not the case with the exception being the %{api func} {api arg} field type where an pluggable api call from
a module may be executed as the parsing occurs but this is meant to be used to draw realtime info such as
date and time or other quickly accessible information and shold *not* be abused.
The anatomy of an <extension> tag.
Legend:
Text wrapped in [] indicates optional and is not part of the actual code.
a '|' inside [] indicates mutiple possible values and also is not part of the code.
Text wrapped in {} indicates it's a description of the parameter in place of the param itself.
<extension name="{exten_name}" [continue="[true|false]"]>
continue=true means even if an extension executes to continue
parsing the next extension too
The {exten_name} above may anything but if it's
an exact match with the destination number the parser will leap to this extension
to begin the searching that does not mean it will execute the extension.
Searching will either begin at the first extension in the context or at the point
the the parser has jumped to in the case described above.
Each condition is parsed in turn first taking the 'field' param.
The parser will apply the perl regular expression to each 'field' param encountered.
If the expression matches, it will parse each existing <action> tag in turn and add
the data from the <application> tags to the channels todo list.
If a matched expression contains any data wrapped in () the variables
$1,$2..$N will be valid and expanded in any of 'data' params from the subsequent action tags.
If the expression does NOT match, it will parse each <anti-action> tag in turn and add
the data from the <application> tags to the channels todo list.
*NOTE* since there was no match the () feature is not availabe in anti-actions
The 'break' param indicates how to behave in relation to matching:
*) 'on-true' - stop searching conditions after the first successful match.
*) 'on-false' - stop searching after the first unsuccessful match.
*) 'always' - stop at this conditon regardless of a match or non-match.
*) 'never' - continue searching regardless of a match or non-match.
<condition field="[{field name}|${variable name}|%{api func} {api arg}]" expression="{expression}" break="[on-true|on-false|always|never]">
<action application="{app name}" data="{app arg}"/>
<anti-action application="{app name}" data="{app arg}"/>
</condition>
<!-- any number of condition tags may follow where the same rules apply -->
</extension>
git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@2167 d0543943-73ff-0310-b7d9-9358b9ac24b2
Anthony Minessale