autotools cleanup

git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@977 d0543943-73ff-0310-b7d9-9358b9ac24b2
This commit is contained in:
Anthony Minessale 2006-03-30 14:43:39 +00:00
parent 244e717db0
commit e8b9a4f781
14 changed files with 1655 additions and 1302 deletions

243
INSTALL
View File

@ -1,39 +1,236 @@
UNIX:
You will need 'wget' installed in your path so the build system
can download the dependancies.
Installation Instructions
*************************
1) Prepare Automake
./configure
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
Software Foundation, Inc.
2) Edit modules.conf and adjust to taste.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
3) Choose one of the following:
Basic Installation
==================
*) Build The Entire Project (reccommended)
make installall
These are generic installation instructions.
*) Do it yourself step by step:
make
make install
make modules
make install_mod
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. (Caching is
disabled by default to prevent problems with accidental use of stale
cache files.)
*) Rebuild all the dependancies
make megaclean
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You only need
`configure.ac' if you want to change it or regenerate `configure' using
a newer version of `autoconf'.
Windows 32:
The simplest way to compile this package is:
Requires: Microsoft Visual Studio 2005 or
Visual C++ 2005 Express Edition and Platform SDK
Internet connectivity to download dependency libraries
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
1) Open /w32/vsnet/Freeswitch.sln
Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.
2) Choose Release or Debug build
2. Type `make' to compile the package.
3) Build solution or your choice of modules using the ide.
3. Optionally, type `make check' to run any self-tests that come with
the package.
4. Type `make install' to install the programs and any data files and
documentation.
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that the
`configure' script does not know about. Run `./configure --help' for
details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not support the `VPATH'
variable, you have to compile the package for one architecture at a
time in the source code directory. After you have installed the
package for one architecture, use `make distclean' before reconfiguring
for another architecture.
Installation Names
==================
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' cannot figure out automatically,
but needs to determine by the type of machine the package will run on.
Usually, assuming the package is built to be run on the _same_
architectures, `configure' can figure that out, but if it prints a
message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share, you
can create a site shell script called `config.site' that gives default
values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script). Here is a another example:
/bin/bash ./configure CONFIG_SHELL=/bin/bash
Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
configuration-related scripts to be executed by `/bin/bash'.
`configure' Invocation
======================
`configure' recognizes the following options to control how it operates.
`--help'
`-h'
Print a summary of the options to `configure', and exit.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.

View File

@ -46,8 +46,12 @@ DIST_COMMON = README $(am__configure_deps) $(library_include_HEADERS) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(top_srcdir)/configure $(top_srcdir)/src/include/config.h.in \
$(top_srcdir)/src/include/switch_version.h.in AUTHORS COPYING \
ChangeLog INSTALL NEWS TODO compile config.guess config.sub \
depcomp install-sh ltmain.sh missing mkinstalldirs
ChangeLog INSTALL NEWS TODO build/config/compile \
build/config/config.guess build/config/config.sub \
build/config/depcomp build/config/install-sh \
build/config/ltmain.sh build/config/missing compile \
config.guess config.sub depcomp install-sh ltmain.sh missing \
mkinstalldirs
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
@ -55,7 +59,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/include/config.h
CONFIG_CLEAN_FILES = src/include/switch_version.h
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@ -90,7 +94,7 @@ am_freeswitch_OBJECTS = freeswitch-switch.$(OBJEXT)
freeswitch_OBJECTS = $(am_freeswitch_OBJECTS)
freeswitch_DEPENDENCIES = ${top_builddir}/libfreeswitch.la
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src/include
depcomp = $(SHELL) $(top_srcdir)/depcomp
depcomp = $(SHELL) $(top_srcdir)/build/config/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@ -160,18 +164,10 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
IS64BITLINUX_FALSE = @IS64BITLINUX_FALSE@
IS64BITLINUX_TRUE = @IS64BITLINUX_TRUE@
ISGCC_FALSE = @ISGCC_FALSE@
ISGCC_TRUE = @ISGCC_TRUE@
ISLINUX_FALSE = @ISLINUX_FALSE@
ISLINUX_TRUE = @ISLINUX_TRUE@
ISMAC_FALSE = @ISMAC_FALSE@
ISMAC_TRUE = @ISMAC_TRUE@
ISSUN64_FALSE = @ISSUN64_FALSE@
ISSUN64_TRUE = @ISSUN64_TRUE@
ISSUNOS_FALSE = @ISSUNOS_FALSE@
ISSUNOS_TRUE = @ISSUNOS_TRUE@
ISSUNSPARC_FALSE = @ISSUNSPARC_FALSE@
ISSUNSPARC_TRUE = @ISSUNSPARC_TRUE@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
@ -757,7 +753,7 @@ distclean-tags:
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
$(mkdir_p) $(distdir)/src/include
$(mkdir_p) $(distdir)/build/config $(distdir)/src/include
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \

166
aclocal.m4 vendored
View File

@ -143,7 +143,7 @@ rm="rm -f"
default_ofile=libtool
can_build_shared=yes
# All known linkers require a `.a' archive for static linking (except MSVC,
# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
@ -359,8 +359,8 @@ if test "X${echo_test_string+set}" != Xset; then
# find a string as large as possible, as long as the shell can cope with it
for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
# expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
if (echo_test_string=`eval $cmd`) 2>/dev/null &&
echo_test_string=`eval $cmd` &&
if (echo_test_string="`eval $cmd`") 2>/dev/null &&
echo_test_string="`eval $cmd`" &&
(test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
then
break
@ -529,7 +529,7 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
case "`/usr/bin/file conftest.o`" in
*32-bit*)
case $host in
x86_64-*linux*)
@ -611,7 +611,7 @@ AC_CACHE_CHECK([$1], [$2],
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
@ -650,7 +650,7 @@ AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
LDFLAGS="$LDFLAGS $3"
printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
@ -725,7 +725,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
elif test -x /usr/sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
else
lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
lt_cv_sys_max_cmd_len=65536 # usable default for *BSD
fi
# And add a safety zone
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
@ -854,7 +854,7 @@ int main ()
}]
EOF
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
(./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) $1 ;;
@ -1003,7 +1003,7 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
@ -1021,7 +1021,7 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
fi
fi
chmod u+w . 2>&AS_MESSAGE_LOG_FD
chmod u+w .
$rm conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
@ -1281,8 +1281,7 @@ cygwin* | mingw* | pw32*)
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
chmod a+x \$dldir/$dlname'
$install_prog $dir/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
@ -1335,7 +1334,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@ -1373,14 +1372,7 @@ kfreebsd*-gnu)
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
if test -x /usr/bin/objformat; then
objformat=`/usr/bin/objformat`
else
case $host_os in
freebsd[[123]]*) objformat=aout ;;
*) objformat=elf ;;
esac
fi
objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
@ -1425,7 +1417,7 @@ hpux9* | hpux10* | hpux11*)
version_type=sunos
need_lib_prefix=no
need_version=no
case $host_cpu in
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
@ -1821,7 +1813,7 @@ AC_DEFUN([AC_LIBTOOL_DLOPEN],
# AC_LIBTOOL_WIN32_DLL
# --------------------
# declare package support for building win32 DLLs
# declare package support for building win32 dll's
AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
])# AC_LIBTOOL_WIN32_DLL
@ -1995,7 +1987,7 @@ dnl not every word. This closes a longstanding sh security hole.
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
@ -2105,7 +2097,7 @@ AC_CACHE_VAL(lt_cv_path_LD,
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
@ -2137,7 +2129,7 @@ AC_PROG_LD_GNU
AC_DEFUN([AC_PROG_LD_GNU],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU lds only accept -v.
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
@ -2251,7 +2243,7 @@ gnu*)
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case $host_cpu in
case "$host_cpu" in
ia64*)
lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
@ -2425,13 +2417,13 @@ esac
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl convenience library and
# LTDLINCL to the include flags for the libltdl header and adds
# --enable-ltdl-convenience to the configure arguments. Note that
# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
# (note the single quotes!). If your package is not flat and you're not
# using automake, define top_builddir and top_srcdir appropriately in
# the Makefiles.
# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
# '${top_srcdir}/' (note the single quotes!). If your package is not
# flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case $enable_ltdl_convenience in
@ -2450,13 +2442,13 @@ AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl installable library and
# LTDLINCL to the include flags for the libltdl header and adds
# --enable-ltdl-install to the configure arguments. Note that
# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
# and an installed libltdl is not found, it is assumed to be `libltdl'.
# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
# '${top_srcdir}/' (note the single quotes!). If your package is not
# flat and you're not using automake, define top_builddir and top_srcdir
# appropriately in the Makefiles.
# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
# DIRECTORY is not provided and an installed libltdl is not found, it is
# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
# quotes!). If your package is not flat and you're not using automake,
# define top_builddir and top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
@ -2635,7 +2627,7 @@ test "$can_build_shared" = "no" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
case "$host_os" in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
@ -2702,7 +2694,7 @@ _LT_AC_TAGVAR(postdeps, $1)=
_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
# Source file extension for C++ test sources.
ac_ext=cpp
ac_ext=cc
# Object file extension for compiled C++ test sources.
objext=o
@ -2918,7 +2910,7 @@ case $host_os in
# Exported symbols can be pulled into shared objects from archives
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
# This is similar to how AIX traditionally builds its shared libraries.
# This is similar to how AIX traditionally builds it's shared libraries.
_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
@ -2957,7 +2949,7 @@ case $host_os in
fi
;;
darwin* | rhapsody*)
case $host_os in
case "$host_os" in
rhapsody* | darwin1.[[012]])
_LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
;;
@ -2995,7 +2987,7 @@ case $host_os in
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
fi
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
else
@ -3008,7 +3000,7 @@ case $host_os in
output_verbose_link_cmd='echo'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
;;
@ -3088,7 +3080,7 @@ case $host_os in
;;
hpux10*|hpux11*)
if test $with_gnu_ld = no; then
case $host_cpu in
case "$host_cpu" in
hppa*64*)
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
@ -3104,7 +3096,7 @@ case $host_os in
;;
esac
fi
case $host_cpu in
case "$host_cpu" in
hppa*64*)
_LT_AC_TAGVAR(hardcode_direct, $1)=no
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
@ -3130,7 +3122,7 @@ case $host_os in
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
;;
@ -3151,7 +3143,7 @@ case $host_os in
*)
if test "$GXX" = yes; then
if test $with_gnu_ld = no; then
case $host_cpu in
case "$host_cpu" in
ia64*|hppa*64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
;;
@ -3252,7 +3244,7 @@ case $host_os in
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
;;
cxx*)
# Compaq C++
@ -3484,11 +3476,10 @@ case $host_os in
case $cc_basename in
CC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
@ -3508,7 +3499,15 @@ case $host_os in
esac
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
output_verbose_link_cmd='echo'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
@ -3665,7 +3664,7 @@ if AC_TRY_EVAL(ac_compile); then
# The `*' in the case matches for architectures that use `case' in
# $output_verbose_cmd can trigger glob expansion during the loop
# eval without this substitution.
output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
for p in `eval $output_verbose_link_cmd`; do
case $p in
@ -3741,21 +3740,6 @@ fi
$rm -f confest.$objext
# PORTME: override above test on systems where it is broken
ifelse([$1],[CXX],
[case $host_os in
solaris*)
case $cc_basename in
CC*)
# Adding this requires a known-good setup of shared libraries for
# Sun compiler versions before 5.6, else PIC objects from an old
# archive will be linked into the output, leading to subtle bugs.
_LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
;;
esac
esac
])
case " $_LT_AC_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
@ -3825,7 +3809,7 @@ test "$can_build_shared" = "no" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
case "$host_os" in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
@ -4724,7 +4708,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
;;
*)
@ -4793,7 +4777,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
aCC*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
@ -4834,7 +4818,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
# Portland Group C++ compiler.
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
cxx*)
# Compaq C++
@ -4998,7 +4982,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
@ -5045,7 +5029,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
@ -5075,12 +5059,12 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
pgcc* | pgf77* | pgf90* | pgf95*)
pgcc* | pgf77* | pgf90*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
ccc*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@ -5163,7 +5147,7 @@ if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
fi
case $host_os in
case "$host_os" in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
@ -5354,11 +5338,11 @@ EOF
tmp_addflag=
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
pgf77* | pgf90* ) # Portland Group f77 and f90 compilers
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@ -5564,7 +5548,7 @@ EOF
# Exported symbols can be pulled into shared objects from archives
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
# This is similar to how AIX traditionally builds its shared libraries.
# This is similar to how AIX traditionally builds it's shared libraries.
_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
@ -5604,7 +5588,7 @@ EOF
;;
darwin* | rhapsody*)
case $host_os in
case "$host_os" in
rhapsody* | darwin1.[[012]])
_LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
;;
@ -5633,7 +5617,7 @@ EOF
output_verbose_link_cmd='echo'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
else
@ -5642,7 +5626,7 @@ EOF
output_verbose_link_cmd='echo'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
;;
@ -5708,7 +5692,7 @@ EOF
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
@ -5717,7 +5701,7 @@ EOF
;;
esac
else
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
@ -5727,7 +5711,7 @@ EOF
esac
fi
if test "$with_gnu_ld" = no; then
case $host_cpu in
case "$host_cpu" in
hppa*64*)
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'

142
build/config/compile Executable file
View File

@ -0,0 +1,142 @@
#! /bin/sh
# Wrapper for compilers which do not understand `-c -o'.
scriptversion=2005-05-14.22
# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
case $1 in
'')
echo "$0: No command. Try \`$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand `-c -o'.
Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file `INSTALL'.
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "compile $scriptversion"
exit $?
;;
esac
ofile=
cfile=
eat=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as `compile cc -o foo foo.c'.
# So we strip `-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no `-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# `.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
# Create the lock directory.
# Note: use `[/.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:

File diff suppressed because it is too large Load Diff

87
config.sub → build/config/config.sub vendored Normal file → Executable file
View File

@ -1,9 +1,9 @@
#! /bin/sh
# Configuration validation subroutine script.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
timestamp='2004-06-24'
timestamp='2005-07-08'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@ -21,14 +21,15 @@ timestamp='2004-06-24'
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.
# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
# 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Please send patches to <config-patches@gnu.org>. Submit a context
# diff and a properly formatted ChangeLog entry.
#
@ -70,7 +71,7 @@ Report bugs and patches to <config-patches@gnu.org>."
version="\
GNU config.sub ($timestamp)
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
@ -83,11 +84,11 @@ Try \`$me --help' for more information."
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
echo "$timestamp" ; exit 0 ;;
echo "$timestamp" ; exit ;;
--version | -v )
echo "$version" ; exit 0 ;;
echo "$version" ; exit ;;
--help | --h* | -h )
echo "$usage"; exit 0 ;;
echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
@ -99,7 +100,7 @@ while test $# -gt 0 ; do
*local*)
# First pass through any local machine types.
echo $1
exit 0;;
exit ;;
* )
break ;;
@ -231,13 +232,14 @@ case $basic_machine in
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| am33_2.0 \
| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
| bfin \
| c4x | clipper \
| d10v | d30v | dlx | dsp16xx \
| fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
| m32r | m32rle | m68000 | m68k | m88k | mcore \
| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
@ -246,6 +248,7 @@ case $basic_machine in
| mips64vr4100 | mips64vr4100el \
| mips64vr4300 | mips64vr4300el \
| mips64vr5000 | mips64vr5000el \
| mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
| mipsisa64 | mipsisa64el \
@ -254,23 +257,28 @@ case $basic_machine in
| mipsisa64sr71k | mipsisa64sr71kel \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
| ms1 \
| msp430 \
| ns16k | ns32k \
| openrisc | or32 \
| or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
| pyramid \
| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \
| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
| sparcv8 | sparcv9 | sparcv9b \
| strongarm \
| tahoe | thumb | tic4x | tic80 | tron \
| v850 | v850e \
| we32k \
| x86 | xscale | xstormy16 | xtensa \
| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
| z8k)
basic_machine=$basic_machine-unknown
;;
m32c)
basic_machine=$basic_machine-unknown
;;
m6811 | m68hc11 | m6812 | m68hc12)
# Motorola 68HC11/12.
basic_machine=$basic_machine-unknown
@ -298,7 +306,7 @@ case $basic_machine in
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* \
| bs2000-* \
| bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
| clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
@ -310,7 +318,7 @@ case $basic_machine in
| ip2k-* | iq2000-* \
| m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
| m88110-* | m88k-* | mcore-* \
| m88110-* | m88k-* | maxq-* | mcore-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
@ -319,6 +327,7 @@ case $basic_machine in
| mips64vr4100-* | mips64vr4100el-* \
| mips64vr4300-* | mips64vr4300el-* \
| mips64vr5000-* | mips64vr5000el-* \
| mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
| mipsisa64-* | mipsisa64el-* \
@ -327,6 +336,7 @@ case $basic_machine in
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipstx39-* | mipstx39el-* \
| mmix-* \
| ms1-* \
| msp430-* \
| none-* | np1-* | ns16k-* | ns32k-* \
| orion-* \
@ -334,20 +344,23 @@ case $basic_machine in
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
| pyramid-* \
| romp-* | rs6000-* \
| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
| sparclite-* \
| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
| tahoe-* | thumb-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tron-* \
| v850-* | v850e-* | vax-* \
| we32k-* \
| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
| xtensa-* \
| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
| xstormy16-* | xtensa-* \
| ymp-* \
| z8k-*)
;;
m32c-*)
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
386bsd)
@ -457,6 +470,9 @@ case $basic_machine in
crds | unos)
basic_machine=m68k-crds
;;
crisv32 | crisv32-* | etraxfs*)
basic_machine=crisv32-axis
;;
cris | cris-* | etrax*)
basic_machine=cris-axis
;;
@ -486,6 +502,10 @@ case $basic_machine in
basic_machine=m88k-motorola
os=-sysv3
;;
djgpp)
basic_machine=i586-pc
os=-msdosdjgpp
;;
dpx20 | dpx20-*)
basic_machine=rs6000-bull
os=-bosx
@ -751,9 +771,8 @@ case $basic_machine in
basic_machine=hppa1.1-oki
os=-proelf
;;
or32 | or32-*)
openrisc | openrisc-*)
basic_machine=or32-unknown
os=-coff
;;
os400)
basic_machine=powerpc-ibm
@ -1026,6 +1045,10 @@ case $basic_machine in
basic_machine=hppa1.1-winbond
os=-proelf
;;
xbox)
basic_machine=i686-pc
os=-mingw32
;;
xps | xps100)
basic_machine=xps100-honeywell
;;
@ -1075,12 +1098,9 @@ case $basic_machine in
we32k)
basic_machine=we32k-att
;;
sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
basic_machine=sh-unknown
;;
sh64)
basic_machine=sh64-unknown
;;
sparc | sparcv8 | sparcv9 | sparcv9b)
basic_machine=sparc-sun
;;
@ -1167,7 +1187,8 @@ case $os in
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
| -skyos* | -haiku*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@ -1185,7 +1206,7 @@ case $os in
os=`echo $os | sed -e 's|nto|nto-qnx|'`
;;
-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
| -windows* | -osx | -abug | -netware* | -os9* | -beos* \
| -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
| -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
;;
-mac*)
@ -1294,6 +1315,9 @@ case $os in
-kaos*)
os=-kaos
;;
-zvmoe)
os=-zvmoe
;;
-none)
;;
*)
@ -1371,6 +1395,9 @@ case $basic_machine in
*-be)
os=-beos
;;
*-haiku)
os=-haiku
;;
*-ibm)
os=-aix
;;
@ -1542,7 +1569,7 @@ case $basic_machine in
esac
echo $basic_machine$os
exit 0
exit
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)

103
depcomp → build/config/depcomp Normal file → Executable file
View File

@ -1,7 +1,9 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
# Copyright 1999, 2000, 2003 Free Software Foundation, Inc.
scriptversion=2005-07-09.11
# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@ -15,8 +17,8 @@
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@ -25,22 +27,45 @@
# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
case $1 in
'')
echo "$0: No command. Try \`$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.
Environment variables:
depmode Dependency tracking mode.
source Source file read by `PROGRAMS ARGS'.
object Object file output by `PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputing dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "depcomp $scriptversion"
exit $?
;;
esac
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# `libtool' can also be set to `yes' or `no'.
if test -z "$depfile"; then
base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
dir=`echo "$object" | sed 's,/.*$,/,'`
if test "$dir" = "$object"; then
dir=
fi
# FIXME: should be _deps on DOS.
depfile="$dir.deps/$base"
fi
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
depfile=${depfile-`echo "$object" |
sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
@ -262,27 +287,43 @@ tru64)
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
tmpdepfile1="$dir.libs/$base.lo.d"
tmpdepfile2="$dir.libs/$base.d"
# With Tru64 cc, shared objects can also be used to make a
# static library. This mecanism is used in libtool 1.4 series to
# handle both shared and static libraries in a single compilation.
# With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
#
# With libtool 1.5 this exception was removed, and libtool now
# generates 2 separate objects for the 2 libraries. These two
# compilations output dependencies in in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
# automatically cleaned when .libs/ is deleted, while ignoring
# the former would cause a distcleancheck panic.
tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
tmpdepfile2=$dir$base.o.d # libtool 1.5
tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
"$@" -Wc,-MD
else
tmpdepfile1="$dir$base.o.d"
tmpdepfile2="$dir$base.d"
tmpdepfile1=$dir$base.o.d
tmpdepfile2=$dir$base.d
tmpdepfile3=$dir$base.d
tmpdepfile4=$dir$base.d
"$@" -MD
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile1" "$tmpdepfile2"
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
exit $stat
fi
if test -f "$tmpdepfile1"; then
tmpdepfile="$tmpdepfile1"
else
tmpdepfile="$tmpdepfile2"
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a tab and a space in the [].
@ -426,7 +467,8 @@ cpp)
done
"$@" -E |
sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
@ -477,3 +519,12 @@ none)
esac
exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:

323
build/config/install-sh Executable file
View File

@ -0,0 +1,323 @@
#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2005-05-14.22
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
chmodcmd="$chmodprog 0755"
chowncmd=
chgrpcmd=
stripcmd=
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=
dst=
dir_arg=
dstarg=
no_target_directory=
usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
-c (ignored)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
--help display this help and exit.
--version display version info and exit.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"
while test -n "$1"; do
case $1 in
-c) shift
continue;;
-d) dir_arg=true
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
--help) echo "$usage"; exit $?;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-s) stripcmd=$stripprog
shift
continue;;
-t) dstarg=$2
shift
shift
continue;;
-T) no_target_directory=true
shift
continue;;
--version) echo "$0 $scriptversion"; exit $?;;
*) # When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
test -n "$dir_arg$dstarg" && break
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dstarg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dstarg"
shift # fnord
fi
shift # arg
dstarg=$arg
done
break;;
esac
done
if test -z "$1"; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
for src
do
# Protect names starting with `-'.
case $src in
-*) src=./$src ;;
esac
if test -n "$dir_arg"; then
dst=$src
src=
if test -d "$dst"; then
mkdircmd=:
chmodcmd=
else
mkdircmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dstarg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dstarg
# Protect names starting with `-'.
case $dst in
-*) dst=./$dst ;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dstarg: Is a directory" >&2
exit 1
fi
dst=$dst/`basename "$src"`
fi
fi
# This sed command emulates the dirname command.
dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# Skip lots of stat calls in the usual case.
if test ! -d "$dstdir"; then
defaultIFS='
'
IFS="${IFS-$defaultIFS}"
oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
shift
IFS=$oIFS
pathcomp=
while test $# -ne 0 ; do
pathcomp=$pathcomp$1
shift
if test ! -d "$pathcomp"; then
$mkdirprog "$pathcomp"
# mkdir can fail with a `File exist' error in case several
# install-sh are creating the directory concurrently. This
# is OK.
test -d "$pathcomp" || exit
fi
pathcomp=$pathcomp/
done
fi
if test -n "$dir_arg"; then
$doit $mkdircmd "$dst" \
&& { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
else
dstfile=`basename "$dst"`
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
trap '(exit $?); exit' 1 2 13 15
# Copy the file name to the temp name.
$doit $cpprog "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
# Now rename the file to the real destination.
{ $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
|| {
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
if test -f "$dstdir/$dstfile"; then
$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
|| $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
|| {
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
(exit 1); exit 1
}
else
:
fi
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
}
}
fi || { (exit 1); exit 1; }
done
# The final little trick to "correctly" pass the exit status to the exit trap.
{
(exit 0); exit 0
}
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:

346
ltmain.sh → build/config/ltmain.sh Executable file → Normal file
View File

@ -1,7 +1,7 @@
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
@ -17,7 +17,7 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@ -43,8 +43,8 @@ EXIT_FAILURE=1
PROGRAM=ltmain.sh
PACKAGE=libtool
VERSION=1.5.8
TIMESTAMP=" (1.1220.2.117 2004/08/04 14:12:05)"
VERSION=1.5.18
TIMESTAMP=" (1.1220.2.245 2005/05/16 08:55:27)"
# See if we are running on zsh, and set the options which allow our
# commands through without removal of \ escapes.
@ -112,8 +112,9 @@ if test "${LANG+set}" = set; then
fi
# Make sure IFS has a sensible default
: ${IFS="
"}
lt_nl='
'
IFS=" $lt_nl"
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
$echo "$modename: not configured to build any kind of library" 1>&2
@ -132,6 +133,7 @@ show_help=
execute_dlfiles=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
quote_scanset='[[~#^*{};<>?'"'"' ]'
#####################################
# Shell function definitions:
@ -143,7 +145,8 @@ o2lo="s/\\.${objext}\$/.lo/"
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
func_win32_libid () {
func_win32_libid ()
{
win32_libid_type="unknown"
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
@ -183,12 +186,13 @@ func_win32_libid () {
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
func_infer_tag () {
func_infer_tag ()
{
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@ -209,7 +213,7 @@ func_infer_tag () {
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@ -242,8 +246,25 @@ func_infer_tag () {
}
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
f_ex_an_ar_dir="$1"; shift
f_ex_an_ar_oldlib="$1"
$show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
$run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
:
else
$echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
exit $EXIT_FAILURE
fi
}
# func_extract_archives gentop oldlib ...
func_extract_archives () {
func_extract_archives ()
{
my_gentop="$1"; shift
my_oldlibs=${1+"$@"}
my_oldobjs=""
@ -287,7 +308,7 @@ func_extract_archives () {
cd $my_xdir || exit $?
darwin_archive=$my_xabs
darwin_curdir=`pwd`
darwin_base_archive=`basename $darwin_archive`
darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
if test -n "$darwin_arches"; then
darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
@ -296,64 +317,33 @@ func_extract_archives () {
for darwin_arch in $darwin_arches ; do
mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
# Remove the table of contents from the thin files.
$AR -d "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" __.SYMDEF 2>/dev/null || true
$AR -d "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" __.SYMDEF\ SORTED 2>/dev/null || true
cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
$AR -xo "${darwin_base_archive}"
rm "${darwin_base_archive}"
func_extract_an_archive "`pwd`" "${darwin_base_archive}"
cd "$darwin_curdir"
$rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
done # $darwin_arches
## Okay now we have a bunch of thin objects, gotta fatten them up :)
darwin_filelist=`find unfat-$$ -type f | xargs basename | sort -u | $NL2SP`
darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
lipo -create -output "$darwin_file" $darwin_files
done # $darwin_filelist
rm -rf unfat-$$
${rm}r unfat-$$
cd "$darwin_orig_dir"
else
cd $darwin_orig_dir
(cd $my_xdir && $AR x $my_xabs) || exit $?
cd "$darwin_orig_dir"
func_extract_an_archive "$my_xdir" "$my_xabs"
fi # $darwin_arches
fi # $run
;;
*)
# We will extract separately just the conflicting names and we will
# no longer touch any unique names. It is faster to leave these
# extract automatically by $AR in one run.
$show "(cd $my_xdir && $AR x $my_xabs)"
$run eval "(cd \$my_xdir && $AR x \$my_xabs)" || exit $?
if ($AR t "$my_xabs" | sort | sort -uc >/dev/null 2>&1); then
:
else
$echo "$modename: warning: object name conflicts; renaming object files" 1>&2
$echo "$modename: warning: to ensure that they will not overwrite" 1>&2
$AR t "$my_xabs" | sort | uniq -cd | while read -r count name
do
i=1
while test "$i" -le "$count"
do
# Put our $i before any first dot (extension)
# Never overwrite any file
name_to="$name"
while test "X$name_to" = "X$name" || test -f "$my_xdir/$name_to"
do
name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
done
$show "(cd $my_xdir && $AR xN $i $my_xabs '$name' && $mv '$name' '$name_to')"
$run eval "(cd \$my_xdir && $AR xN $i \$my_xabs '$name' && $mv '$name' '$name_to')" || exit $?
i=`expr $i + 1`
done
done
fi
;;
func_extract_an_archive "$my_xdir" "$my_xabs"
;;
esac
my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
done
func_extract_archives_result="$my_oldobjs"
}
# End of Shell function definitions
@ -426,10 +416,10 @@ do
--version)
$echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
$echo
$echo "Copyright (C) 2003 Free Software Foundation, Inc."
$echo "Copyright (C) 2005 Free Software Foundation, Inc."
$echo "This is free software; see the source for copying conditions. There is NO"
$echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
exit $EXIT_SUCCESS
exit $?
;;
--config)
@ -438,7 +428,7 @@ do
for tagname in $taglist; do
${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
done
exit $EXIT_SUCCESS
exit $?
;;
--debug)
@ -463,7 +453,7 @@ do
else
$echo "disable static libraries"
fi
exit $EXIT_SUCCESS
exit $?
;;
--finish) mode="finish" ;;
@ -520,7 +510,7 @@ if test -z "$show_help"; then
# Infer the operation mode.
if test -z "$mode"; then
$echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
$echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2
$echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
case $nonopt in
*cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
mode=link
@ -637,7 +627,7 @@ if test -z "$show_help"; then
# Many Bourne shells cannot handle close brackets correctly
# in scan sets, so we specify it separately.
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@ -668,8 +658,11 @@ if test -z "$show_help"; then
case $lastarg in
# Double-quote args containing other shell metacharacters.
# Many Bourne shells cannot handle close brackets correctly
# in scan sets, so we specify it separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
# in scan sets, and some SunOS ksh mistreat backslash-escaping
# in scan sets (worked around with variable expansion),
# and furthermore cannot handle '|' '&' '(' ')' in scan sets
# at all, so we specify them separately.
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
lastarg="\"$lastarg\""
;;
esac
@ -742,6 +735,15 @@ if test -z "$show_help"; then
esac
done
qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
case $qlibobj in
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
qlibobj="\"$qlibobj\"" ;;
esac
if test "X$libobj" != "X$qlibobj"; then
$echo "$modename: libobj name \`$libobj' may not contain shell special characters."
exit $EXIT_FAILURE
fi
objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
if test "X$xdir" = "X$obj"; then
@ -814,12 +816,17 @@ compiler."
$run $rm $removelist
exit $EXIT_FAILURE
fi
$echo $srcfile > "$lockfile"
$echo "$srcfile" > "$lockfile"
fi
if test -n "$fix_srcfile_path"; then
eval srcfile=\"$fix_srcfile_path\"
fi
qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
case $qsrcfile in
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
qsrcfile="\"$qsrcfile\"" ;;
esac
$run $rm "$libobj" "${libobj}T"
@ -841,10 +848,10 @@ EOF
fbsd_hideous_sh_bug=$base_compile
if test "$pic_mode" != no; then
command="$base_compile $srcfile $pic_flag"
command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
command="$base_compile $srcfile"
command="$base_compile $qsrcfile"
fi
if test ! -d "${xdir}$objdir"; then
@ -924,9 +931,9 @@ EOF
if test "$build_old_libs" = yes; then
if test "$pic_mode" != yes; then
# Don't build PIC code
command="$base_compile $srcfile"
command="$base_compile $qsrcfile"
else
command="$base_compile $srcfile $pic_flag"
command="$base_compile $qsrcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
command="$command -o $obj"
@ -1104,7 +1111,7 @@ EOF
arg="$1"
shift
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
;;
*) qarg=$arg ;;
@ -1348,6 +1355,13 @@ EOF
prev=
continue
;;
darwin_framework)
compiler_flags="$compiler_flags $arg"
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
prev=
continue
;;
*)
eval "$prev=\"\$arg\""
prev=
@ -1406,6 +1420,14 @@ EOF
continue
;;
-framework)
prev=darwin_framework
compiler_flags="$compiler_flags $arg"
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
continue
;;
-inst-prefix-dir)
prev=inst_prefix
continue
@ -1466,7 +1488,7 @@ EOF
# These systems don't actually have a C library (as such)
test "X$arg" = "X-lc" && continue
;;
*-*-openbsd* | *-*-freebsd*)
*-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
@ -1477,7 +1499,7 @@ EOF
esac
elif test "X$arg" = "X-lc_r"; then
case $host in
*-*-openbsd* | *-*-freebsd*)
*-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
@ -1487,8 +1509,20 @@ EOF
continue
;;
# Tru64 UNIX uses -model [arg] to determine the layout of C++
# classes, name mangling, and exception handling.
-model)
compile_command="$compile_command $arg"
compiler_flags="$compiler_flags $arg"
finalize_command="$finalize_command $arg"
prev=xcompiler
continue
;;
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
deplibs="$deplibs $arg"
compiler_flags="$compiler_flags $arg"
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
continue
;;
@ -1497,18 +1531,19 @@ EOF
continue
;;
# gcc -m* arguments should be passed to the linker via $compiler_flags
# in order to pass architecture information to the linker
# (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo
# but this is not reliable with gcc because gcc may use -mfoo to
# select a different linker, different libraries, etc, while
# -Wl,-mfoo simply passes -mfoo to the linker.
-m*)
# -64, -mips[0-9] enable 64-bit mode on the SGI compiler
# -r[0-9][0-9]* specifies the processor on the SGI compiler
# -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
# +DA*, +DD* enable 64-bit mode on the HP compiler
# -q* pass through compiler args for the IBM compiler
# -m* pass through architecture-specific compiler args for GCC
-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*)
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@ -1624,7 +1659,7 @@ EOF
for flag in $args; do
IFS="$save_ifs"
case $flag in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
flag="\"$flag\""
;;
esac
@ -1642,7 +1677,7 @@ EOF
for flag in $args; do
IFS="$save_ifs"
case $flag in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
flag="\"$flag\""
;;
esac
@ -1675,7 +1710,7 @@ EOF
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@ -1809,7 +1844,7 @@ EOF
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@ -1976,7 +2011,7 @@ EOF
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
compiler_flags="$compiler_flags $deplib"
fi
continue
;;
@ -1985,10 +2020,6 @@ EOF
$echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
continue
fi
if test "$pass" = conv; then
deplibs="$deplib $deplibs"
continue
fi
name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
for search_ext in .la $std_shrext .so .a; do
@ -2188,6 +2219,8 @@ EOF
# it will not redefine variables installed, or shouldnotlink
installed=yes
shouldnotlink=no
avoidtemprpath=
# Read the .la file
case $lib in
@ -2286,6 +2319,7 @@ EOF
dir="$libdir"
absdir="$libdir"
fi
test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
dir="$ladir"
@ -2370,7 +2404,7 @@ EOF
if test -n "$library_names" &&
{ test "$prefer_static_libs" = no || test -z "$old_library"; }; then
# We need to hardcode the library path
if test -n "$shlibpath_var"; then
if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
case "$temp_rpath " in
*" $dir "*) ;;
@ -2814,12 +2848,12 @@ EOF
*) continue ;;
esac
case " $deplibs " in
*" $depdepl "*) ;;
*) deplibs="$depdepl $deplibs" ;;
*" $path "*) ;;
*) deplibs="$path $deplibs" ;;
esac
case " $deplibs " in
*" $path "*) ;;
*) deplibs="$deplibs $path" ;;
*" $depdepl "*) ;;
*) deplibs="$depdepl $deplibs" ;;
esac
done
fi # link_all_deplibs != no
@ -3084,27 +3118,27 @@ EOF
# Check that each of the things are valid numbers.
case $current in
0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
$echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
$echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
esac
case $revision in
0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
$echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
$echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
esac
case $age in
0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
$echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
$echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
@ -3336,7 +3370,7 @@ EOF
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
;;
*-*-openbsd* | *-*-freebsd*)
*-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
@ -3873,6 +3907,7 @@ EOF
save_libobjs=$libobjs
fi
save_output=$output
output_la=`$echo "X$output" | $Xsed -e "$basename"`
# Clear the reloadable object creation command queue and
# initialize k to one.
@ -3882,7 +3917,7 @@ EOF
delfiles=
last_robj=
k=1
output=$output_objdir/$save_output-${k}.$objext
output=$output_objdir/$output_la-${k}.$objext
# Loop over the list of objects to be linked.
for obj in $save_libobjs
do
@ -3902,9 +3937,9 @@ EOF
# the last one created.
eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
fi
last_robj=$output_objdir/$save_output-${k}.$objext
last_robj=$output_objdir/$output_la-${k}.$objext
k=`expr $k + 1`
output=$output_objdir/$save_output-${k}.$objext
output=$output_objdir/$output_la-${k}.$objext
objlist=$obj
len=1
fi
@ -3924,13 +3959,13 @@ EOF
eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
fi
# Set up a command to remove the reloadale object files
# Set up a command to remove the reloadable object files
# after they are used.
i=0
while test "$i" -lt "$k"
do
i=`expr $i + 1`
delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
done
$echo "creating a temporary reloadable object file: $output"
@ -4327,12 +4362,12 @@ extern \"C\" {
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
export_symbols="$output_objdir/$output.exp"
export_symbols="$output_objdir/$outputname.exp"
$run $rm $export_symbols
$run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
else
$run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
$run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
$run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
$run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
$run eval 'mv "$nlist"T "$nlist"'
fi
fi
@ -4384,7 +4419,26 @@ extern \"C\" {
#endif
/* The mapping between symbol names and symbols. */
"
case $host in
*cygwin* | *mingw* )
$echo >> "$output_objdir/$dlsyms" "\
/* DATA imports from DLLs on WIN32 can't be const, because
runtime relocations are performed -- see ld's documentation
on pseudo-relocs */
struct {
"
;;
* )
$echo >> "$output_objdir/$dlsyms" "\
const struct {
"
;;
esac
$echo >> "$output_objdir/$dlsyms" "\
const char *name;
lt_ptr address;
}
@ -4613,7 +4667,7 @@ static const void *lt_preloaded_setup() {
esac
case $host in
*cygwin* | *mingw* )
cwrappersource=`$echo ${objdir}/lt-${output}.c`
cwrappersource=`$echo ${objdir}/lt-${outputname}.c`
cwrapper=`$echo ${output}.exe`
$rm $cwrappersource $cwrapper
trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
@ -5033,6 +5087,63 @@ fi\
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
cmds=$old_archive_from_new_cmds
else
# POSIX demands no paths to be encoded in archives. We have
# to avoid creating archives with duplicate basenames if we
# might have to extract them afterwards, e.g., when creating a
# static archive out of a convenience library, or when linking
# the entirety of a libtool archive into another (currently
# not supported by libtool).
if (for obj in $oldobjs
do
$echo "X$obj" | $Xsed -e 's%^.*/%%'
done | sort | sort -uc >/dev/null 2>&1); then
:
else
$echo "copying selected object files to avoid basename conflicts..."
if test -z "$gentop"; then
gentop="$output_objdir/${outputname}x"
generated="$generated $gentop"
$show "${rm}r $gentop"
$run ${rm}r "$gentop"
$show "$mkdir $gentop"
$run $mkdir "$gentop"
status=$?
if test "$status" -ne 0 && test ! -d "$gentop"; then
exit $status
fi
fi
save_oldobjs=$oldobjs
oldobjs=
counter=1
for obj in $save_oldobjs
do
objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
case " $oldobjs " in
" ") oldobjs=$obj ;;
*[\ /]"$objbase "*)
while :; do
# Make sure we don't pick an alternate name that also
# overlaps.
newobj=lt$counter-$objbase
counter=`expr $counter + 1`
case " $oldobjs " in
*[\ /]"$newobj "*) ;;
*) if test ! -f "$gentop/$newobj"; then break; fi ;;
esac
done
$show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
$run ln "$obj" "$gentop/$newobj" ||
$run cp "$obj" "$gentop/$newobj"
oldobjs="$oldobjs $gentop/$newobj"
;;
*) oldobjs="$oldobjs $obj" ;;
esac
done
fi
eval cmds=\"$old_archive_cmds\"
if len=`expr "X$cmds" : ".*"` &&
@ -5046,20 +5157,7 @@ fi\
objlist=
concat_cmds=
save_oldobjs=$oldobjs
# GNU ar 2.10+ was changed to match POSIX; thus no paths are
# encoded into archives. This makes 'ar r' malfunction in
# this piecewise linking case whenever conflicting object
# names appear in distinct ar calls; check, warn and compensate.
if (for obj in $save_oldobjs
do
$echo "X$obj" | $Xsed -e 's%^.*/%%'
done | sort | sort -uc >/dev/null 2>&1); then
:
else
$echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2
$echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2
AR_FLAGS=cq
fi
# Is there a better way of finding the last object in the list?
for obj in $save_oldobjs
do
@ -5271,7 +5369,7 @@ relink_command=\"$relink_command\""
# Aesthetically quote it.
arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@ -5287,7 +5385,7 @@ relink_command=\"$relink_command\""
# Aesthetically quote it.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@ -5335,7 +5433,7 @@ relink_command=\"$relink_command\""
# Aesthetically quote the argument.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@ -6374,7 +6472,7 @@ esac
$echo
$echo "Try \`$modename --help' for more information about other modes."
exit $EXIT_SUCCESS
exit $?
# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries. Given conflicting

142
missing → build/config/missing Normal file → Executable file
View File

@ -1,6 +1,10 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
scriptversion=2005-06-08.21
# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
@ -15,8 +19,8 @@
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@ -38,18 +42,24 @@ else
configure_ac=configure.in
fi
msg="missing on your system"
case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
# Exit code 63 means version mismatch. This often happens
# when the user try to use an ancient version of a tool on
# a file that requires a minimum version. In this case we
# we should proceed has if the program had been absent, or
# if --run hadn't been passed.
if test $? = 63; then
run=:
msg="probably too old"
fi
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in
-h|--h|--he|--hel|--help)
echo "\
@ -74,11 +84,15 @@ Supported PROGRAM values:
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
Send bug reports to <bug-automake@gnu.org>."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing 0.4 - GNU automake"
echo "missing $scriptversion (GNU Automake)"
exit $?
;;
-*)
@ -87,14 +101,44 @@ Supported PROGRAM values:
exit 1
;;
aclocal*)
esac
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program).
case "$1" in
lex|yacc)
# Not GNU programs, they don't have --version.
;;
tar)
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
exit 1
fi
;;
*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
# Could not run --version or --help. This is probably someone
# running `$TOOL --version' or `$TOOL --help' to check whether
# $TOOL exists and not knowing $TOOL uses missing.
exit 1
fi
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
WARNING: \`$1' is $msg. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
@ -102,13 +146,8 @@ WARNING: \`$1' is missing on your system. You should only need it if
;;
autoconf)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
@ -116,13 +155,8 @@ WARNING: \`$1' is missing on your system. You should only need it if
;;
autoheader)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
@ -140,13 +174,8 @@ WARNING: \`$1' is missing on your system. You should only need it if
;;
automake*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
WARNING: \`$1' is $msg. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
@ -156,14 +185,9 @@ WARNING: \`$1' is missing on your system. You should only need it if
;;
autom4te)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
WARNING: \`$1' is needed, but is $msg.
You might have modified some files without having the
proper tools for further handling them.
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
@ -185,7 +209,7 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
bison|yacc)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
@ -215,7 +239,7 @@ WARNING: \`$1' is missing on your system. You should only need it if
lex|flex)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
@ -237,13 +261,8 @@ WARNING: \`$1' is missing on your system. You should only need it if
;;
help2man)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
@ -262,32 +281,30 @@ WARNING: \`$1' is missing on your system. You should only need it if
;;
makeinfo)
if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
# We have makeinfo, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
# If the file does not exist, the user really needs makeinfo;
# let's fail without touching anything.
test -f $file || exit 1
touch $file
;;
tar)
shift
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
fi
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
@ -323,8 +340,8 @@ WARNING: I can't seem to be able to run \`tar' with the given arguments.
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
WARNING: \`$1' is needed, and is $msg.
You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
@ -334,3 +351,10 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
esac
exit 0
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:

99
compile
View File

@ -1,99 +0,0 @@
#! /bin/sh
# Wrapper for compilers which do not understand `-c -o'.
# Copyright 1999, 2000 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Usage:
# compile PROGRAM [ARGS]...
# `-o FOO.o' is removed from the args passed to the actual compile.
prog=$1
shift
ofile=
cfile=
args=
while test $# -gt 0; do
case "$1" in
-o)
# configure might choose to run compile as `compile cc -o foo foo.c'.
# So we do something ugly here.
ofile=$2
shift
case "$ofile" in
*.o | *.obj)
;;
*)
args="$args -o $ofile"
ofile=
;;
esac
;;
*.c)
cfile=$1
args="$args $1"
;;
*)
args="$args $1"
;;
esac
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no `-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# `.c' file was seen then we are probably linking. That is also
# ok.
exec "$prog" $args
fi
# Name of file we expect compiler to create.
cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
# Create the lock directory.
# Note: use `[/.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d
while true; do
if mkdir $lockdir > /dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir $lockdir; exit 1" 1 2 15
# Run the compile.
"$prog" $args
status=$?
if test -f "$cofile"; then
mv "$cofile" "$ofile"
fi
rmdir $lockdir
exit $status

413
configure vendored

File diff suppressed because it is too large Load Diff

View File

@ -3,6 +3,7 @@
AC_PREREQ(2.59)
AC_INIT(FULL-PACKAGE-NAME, VERSION, BUG-REPORT-ADDRESS)
AC_CONFIG_AUX_DIR(build/config)
AM_INIT_AUTOMAKE(libfreeswitch,0.1)
AC_CONFIG_SRCDIR([src/switch.c])
AC_CONFIG_HEADER([src/include/config.h])
@ -46,9 +47,9 @@ AC_CONFIG_FILES([Makefile])
AM_CONDITIONAL(ISLINUX, [test `uname -s` = Linux])
AM_CONDITIONAL(ISMAC, [test `uname -s` = Darwin])
AM_CONDITIONAL(IS64BITLINUX, [test `uname -m` = x86_64])
AM_CONDITIONAL(ISSUNOS, [test `uname -s` = SunOS])
AM_CONDITIONAL(ISSUN64, [test `isainfo -b` = 64])
AM_CONDITIONAL(ISSUNSPARC, [test `isainfo -n` = sparcv9])
AM_CONDITIONAL(ISGCC, [test `echo $GCC` = true])
# AM_CONDITIONAL(ISSUNOS, [test `uname -s` = SunOS])
# AM_CONDITIONAL(ISSUN64, [test `isainfo -b` = 64])
# AM_CONDITIONAL(ISSUNSPARC, [test `isainfo -n` = sparcv9])
# AM_CONDITIONAL(ISGCC, [test `echo $GCC` = true])
AC_OUTPUT([src/include/switch_version.h])

View File

@ -1,294 +0,0 @@
#!/bin/sh
#
# install - install a program, script, or datafile
#
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd=$cpprog
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd=$stripprog
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "$0: no input file specified" >&2
exit 1
else
:
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d "$dst" ]; then
instcmd=:
chmodcmd=""
else
instcmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f "$src" ] || [ -d "$src" ]
then
:
else
echo "$0: $src does not exist" >&2
exit 1
fi
if [ x"$dst" = x ]
then
echo "$0: no destination specified" >&2
exit 1
else
:
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d "$dst" ]
then
dst=$dst/`basename "$src"`
else
:
fi
fi
## this sed command emulates the dirname command
dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-$defaultIFS}"
oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS=$oIFS
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp=$pathcomp$1
shift
if [ ! -d "$pathcomp" ] ;
then
$mkdirprog "$pathcomp"
else
:
fi
pathcomp=$pathcomp/
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd "$dst" &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename "$dst"`
else
dstfile=`basename "$dst" $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename "$dst"`
else
:
fi
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up temp files at exit.
trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
trap '(exit $?); exit' 1 2 13 15
# Move or copy the file name to the temp name
$doit $instcmd "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
# Now remove or move aside any old file at destination location. We try this
# two ways since rm can't unlink itself on some systems and the destination
# file might be busy for other reasons. In this case, the final cleanup
# might fail but the new file should still install successfully.
{
if [ -f "$dstdir/$dstfile" ]
then
$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
{
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
(exit 1); exit
}
else
:
fi
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
fi &&
# The final little trick to "correctly" pass the exit status to the exit trap.
{
(exit 0); exit
}