autotools cleanup

git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@977 d0543943-73ff-0310-b7d9-9358b9ac24b2
v1.2.stable
Anthony Minessale 17 years ago
parent 244e717db0
commit e8b9a4f781
  1. 251
      INSTALL
  2. 22
      Makefile.in
  3. 172
      aclocal.m4
  4. 142
      build/config/compile
  5. 554
      build/config/config.guess
  6. 87
      build/config/config.sub
  7. 103
      build/config/depcomp
  8. 323
      build/config/install-sh
  9. 346
      build/config/ltmain.sh
  10. 142
      build/config/missing
  11. 99
      compile
  12. 413
      configure
  13. 9
      configure.in
  14. 294
      install-sh

@ -1,39 +1,236 @@
UNIX:
You will need 'wget' installed in your path so the build system
can download the dependancies.
Installation Instructions
*************************
1) Prepare Automake
./configure
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
Software Foundation, Inc.
2) Edit modules.conf and adjust to taste.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
3) Choose one of the following:
Basic Installation
==================
*) Build The Entire Project (reccommended)
make installall
These are generic installation instructions.
*) Do it yourself step by step:
make
make install
make modules
make install_mod
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. (Caching is
disabled by default to prevent problems with accidental use of stale
cache files.)
*) Rebuild all the dependancies
make megaclean
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You only need
`configure.ac' if you want to change it or regenerate `configure' using
a newer version of `autoconf'.
Windows 32:
The simplest way to compile this package is:
Requires: Microsoft Visual Studio 2005 or
Visual C++ 2005 Express Edition and Platform SDK
Internet connectivity to download dependency libraries
1) Open /w32/vsnet/Freeswitch.sln
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
2) Choose Release or Debug build
Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package.
4. Type `make install' to install the programs and any data files and
documentation.
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that the
`configure' script does not know about. Run `./configure --help' for
details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not support the `VPATH'
variable, you have to compile the package for one architecture at a
time in the source code directory. After you have installed the
package for one architecture, use `make distclean' before reconfiguring
for another architecture.
Installation Names
==================
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' cannot figure out automatically,
but needs to determine by the type of machine the package will run on.
Usually, assuming the package is built to be run on the _same_
architectures, `configure' can figure that out, but if it prints a
message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share, you
can create a site shell script called `config.site' that gives default
values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script). Here is a another example:
/bin/bash ./configure CONFIG_SHELL=/bin/bash
Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
configuration-related scripts to be executed by `/bin/bash'.
`configure' Invocation
======================
`configure' recognizes the following options to control how it operates.
`--help'
`-h'
Print a summary of the options to `configure', and exit.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
3) Build solution or your choice of modules using the ide.

@ -46,8 +46,12 @@ DIST_COMMON = README $(am__configure_deps) $(library_include_HEADERS) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(top_srcdir)/configure $(top_srcdir)/src/include/config.h.in \
$(top_srcdir)/src/include/switch_version.h.in AUTHORS COPYING \
ChangeLog INSTALL NEWS TODO compile config.guess config.sub \
depcomp install-sh ltmain.sh missing mkinstalldirs
ChangeLog INSTALL NEWS TODO build/config/compile \
build/config/config.guess build/config/config.sub \
build/config/depcomp build/config/install-sh \
build/config/ltmain.sh build/config/missing compile \
config.guess config.sub depcomp install-sh ltmain.sh missing \
mkinstalldirs
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in
@ -55,7 +59,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/include/config.h
CONFIG_CLEAN_FILES = src/include/switch_version.h
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@ -90,7 +94,7 @@ am_freeswitch_OBJECTS = freeswitch-switch.$(OBJEXT)
freeswitch_OBJECTS = $(am_freeswitch_OBJECTS)
freeswitch_DEPENDENCIES = ${top_builddir}/libfreeswitch.la
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src/include
depcomp = $(SHELL) $(top_srcdir)/depcomp
depcomp = $(SHELL) $(top_srcdir)/build/config/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@ -160,18 +164,10 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
IS64BITLINUX_FALSE = @IS64BITLINUX_FALSE@
IS64BITLINUX_TRUE = @IS64BITLINUX_TRUE@
ISGCC_FALSE = @ISGCC_FALSE@
ISGCC_TRUE = @ISGCC_TRUE@
ISLINUX_FALSE = @ISLINUX_FALSE@
ISLINUX_TRUE = @ISLINUX_TRUE@
ISMAC_FALSE = @ISMAC_FALSE@
ISMAC_TRUE = @ISMAC_TRUE@
ISSUN64_FALSE = @ISSUN64_FALSE@
ISSUN64_TRUE = @ISSUN64_TRUE@
ISSUNOS_FALSE = @ISSUNOS_FALSE@
ISSUNOS_TRUE = @ISSUNOS_TRUE@
ISSUNSPARC_FALSE = @ISSUNSPARC_FALSE@
ISSUNSPARC_TRUE = @ISSUNSPARC_TRUE@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
@ -757,7 +753,7 @@ distclean-tags:
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
$(mkdir_p) $(distdir)/src/include
$(mkdir_p) $(distdir)/build/config $(distdir)/src/include
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \

172
aclocal.m4 vendored

@ -143,7 +143,7 @@ rm="rm -f"
default_ofile=libtool
can_build_shared=yes
# All known linkers require a `.a' archive for static linking (except MSVC,
# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
@ -359,8 +359,8 @@ if test "X${echo_test_string+set}" != Xset; then
# find a string as large as possible, as long as the shell can cope with it
for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
# expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
if (echo_test_string=`eval $cmd`) 2>/dev/null &&
echo_test_string=`eval $cmd` &&
if (echo_test_string="`eval $cmd`") 2>/dev/null &&
echo_test_string="`eval $cmd`" &&
(test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
then
break
@ -529,7 +529,7 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
case "`/usr/bin/file conftest.o`" in
*32-bit*)
case $host in
x86_64-*linux*)
@ -611,7 +611,7 @@ AC_CACHE_CHECK([$1], [$2],
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
@ -650,7 +650,7 @@ AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
LDFLAGS="$LDFLAGS $3"
printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
@ -725,7 +725,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
elif test -x /usr/sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
else
lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
lt_cv_sys_max_cmd_len=65536 # usable default for *BSD
fi
# And add a safety zone
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
@ -737,7 +737,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
# nice to cause kernel panics so lets avoid the loop below.
# First set a reasonable default.
lt_cv_sys_max_cmd_len=16384
#
#
if test -x /sbin/sysconfig; then
case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
*1*) lt_cv_sys_max_cmd_len=-1 ;;
@ -854,7 +854,7 @@ int main ()
}]
EOF
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
(./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) $1 ;;
@ -1003,7 +1003,7 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
@ -1021,7 +1021,7 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
fi
fi
chmod u+w . 2>&AS_MESSAGE_LOG_FD
chmod u+w .
$rm conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
@ -1281,8 +1281,7 @@ cygwin* | mingw* | pw32*)
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
chmod a+x \$dldir/$dlname'
$install_prog $dir/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
@ -1335,7 +1334,7 @@ darwin* | rhapsody*)
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@ -1373,14 +1372,7 @@ kfreebsd*-gnu)
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
if test -x /usr/bin/objformat; then
objformat=`/usr/bin/objformat`
else
case $host_os in
freebsd[[123]]*) objformat=aout ;;
*) objformat=elf ;;
esac
fi
objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
@ -1425,7 +1417,7 @@ hpux9* | hpux10* | hpux11*)
version_type=sunos
need_lib_prefix=no
need_version=no
case $host_cpu in
case "$host_cpu" in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
@ -1821,7 +1813,7 @@ AC_DEFUN([AC_LIBTOOL_DLOPEN],
# AC_LIBTOOL_WIN32_DLL
# --------------------
# declare package support for building win32 DLLs
# declare package support for building win32 dll's
AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
])# AC_LIBTOOL_WIN32_DLL
@ -1995,7 +1987,7 @@ dnl not every word. This closes a longstanding sh security hole.
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
@ -2105,7 +2097,7 @@ AC_CACHE_VAL(lt_cv_path_LD,
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
@ -2137,7 +2129,7 @@ AC_PROG_LD_GNU
AC_DEFUN([AC_PROG_LD_GNU],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU lds only accept -v.
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
@ -2251,7 +2243,7 @@ gnu*)
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case $host_cpu in
case "$host_cpu" in
ia64*)
lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
@ -2425,13 +2417,13 @@ esac
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl convenience library and
# LTDLINCL to the include flags for the libltdl header and adds
# --enable-ltdl-convenience to the configure arguments. Note that
# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
# (note the single quotes!). If your package is not flat and you're not
# using automake, define top_builddir and top_srcdir appropriately in
# the Makefiles.
# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
# '${top_srcdir}/' (note the single quotes!). If your package is not
# flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case $enable_ltdl_convenience in
@ -2450,13 +2442,13 @@ AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl installable library and
# LTDLINCL to the include flags for the libltdl header and adds
# --enable-ltdl-install to the configure arguments. Note that
# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
# and an installed libltdl is not found, it is assumed to be `libltdl'.
# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
# '${top_srcdir}/' (note the single quotes!). If your package is not
# flat and you're not using automake, define top_builddir and top_srcdir
# appropriately in the Makefiles.
# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
# DIRECTORY is not provided and an installed libltdl is not found, it is
# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
# quotes!). If your package is not flat and you're not using automake,
# define top_builddir and top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
@ -2635,7 +2627,7 @@ test "$can_build_shared" = "no" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
case "$host_os" in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
@ -2702,7 +2694,7 @@ _LT_AC_TAGVAR(postdeps, $1)=
_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
# Source file extension for C++ test sources.
ac_ext=cpp
ac_ext=cc
# Object file extension for compiled C++ test sources.
objext=o
@ -2918,7 +2910,7 @@ case $host_os in
# Exported symbols can be pulled into shared objects from archives
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
# This is similar to how AIX traditionally builds its shared libraries.
# This is similar to how AIX traditionally builds it's shared libraries.
_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
@ -2957,7 +2949,7 @@ case $host_os in
fi
;;
darwin* | rhapsody*)
case $host_os in
case "$host_os" in
rhapsody* | darwin1.[[012]])
_LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
;;
@ -2995,7 +2987,7 @@ case $host_os in
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
fi
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
else
@ -3008,7 +3000,7 @@ case $host_os in
output_verbose_link_cmd='echo'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
;;
@ -3088,7 +3080,7 @@ case $host_os in
;;
hpux10*|hpux11*)
if test $with_gnu_ld = no; then
case $host_cpu in
case "$host_cpu" in
hppa*64*)
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
@ -3104,7 +3096,7 @@ case $host_os in
;;
esac
fi
case $host_cpu in
case "$host_cpu" in
hppa*64*)
_LT_AC_TAGVAR(hardcode_direct, $1)=no
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
@ -3130,7 +3122,7 @@ case $host_os in
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
;;
@ -3151,7 +3143,7 @@ case $host_os in
*)
if test "$GXX" = yes; then
if test $with_gnu_ld = no; then
case $host_cpu in
case "$host_cpu" in
ia64*|hppa*64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
;;
@ -3252,7 +3244,7 @@ case $host_os in
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
;;
cxx*)
# Compaq C++
@ -3484,11 +3476,10 @@ case $host_os in
case $cc_basename in
CC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
@ -3508,7 +3499,15 @@ case $host_os in
esac
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
output_verbose_link_cmd='echo'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
@ -3665,7 +3664,7 @@ if AC_TRY_EVAL(ac_compile); then
# The `*' in the case matches for architectures that use `case' in
# $output_verbose_cmd can trigger glob expansion during the loop
# eval without this substitution.
output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
for p in `eval $output_verbose_link_cmd`; do
case $p in
@ -3741,21 +3740,6 @@ fi
$rm -f confest.$objext
# PORTME: override above test on systems where it is broken
ifelse([$1],[CXX],
[case $host_os in
solaris*)
case $cc_basename in
CC*)
# Adding this requires a known-good setup of shared libraries for
# Sun compiler versions before 5.6, else PIC objects from an old
# archive will be linked into the output, leading to subtle bugs.
_LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
;;
esac
esac
])
case " $_LT_AC_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
@ -3825,7 +3809,7 @@ test "$can_build_shared" = "no" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
case "$host_os" in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
@ -4724,7 +4708,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
;;
*)
@ -4793,7 +4777,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
aCC*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
@ -4834,7 +4818,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
# Portland Group C++ compiler.
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
cxx*)
# Compaq C++
@ -4998,7 +4982,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
@ -5045,7 +5029,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
@ -5075,12 +5059,12 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
pgcc* | pgf77* | pgf90* | pgf95*)
pgcc* | pgf77* | pgf90*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
ccc*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@ -5163,7 +5147,7 @@ if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
fi
case $host_os in
case "$host_os" in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
@ -5259,7 +5243,7 @@ ifelse([$1],[CXX],[
if test "$with_gnu_ld" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
@ -5280,7 +5264,7 @@ ifelse([$1],[CXX],[
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
@ -5354,11 +5338,11 @@ EOF
tmp_addflag=
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
pgf77* | pgf90* ) # Portland Group f77 and f90 compilers
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive,`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@ -5564,7 +5548,7 @@ EOF
# Exported symbols can be pulled into shared objects from archives
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
# This is similar to how AIX traditionally builds its shared libraries.
# This is similar to how AIX traditionally builds it's shared libraries.
_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
@ -5604,7 +5588,7 @@ EOF
;;
darwin* | rhapsody*)
case $host_os in
case "$host_os" in
rhapsody* | darwin1.[[012]])
_LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
;;
@ -5633,7 +5617,7 @@ EOF
output_verbose_link_cmd='echo'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
else
@ -5642,7 +5626,7 @@ EOF
output_verbose_link_cmd='echo'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
;;
@ -5708,7 +5692,7 @@ EOF
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
@ -5717,7 +5701,7 @@ EOF
;;
esac
else
case $host_cpu in
case "$host_cpu" in
hppa*64*|ia64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
@ -5727,7 +5711,7 @@ EOF
esac
fi
if test "$with_gnu_ld" = no; then
case $host_cpu in
case "$host_cpu" in
hppa*64*)
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'

@ -0,0 +1,142 @@
#! /bin/sh
# Wrapper for compilers which do not understand `-c -o'.
scriptversion=2005-05-14.22
# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
case $1 in
'')
echo "$0: No command. Try \`$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand `-c -o'.
Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file `INSTALL'.
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "compile $scriptversion"
exit $?
;;
esac
ofile=
cfile=
eat=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as `compile cc -o foo foo.c'.
# So we strip `-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no `-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# `.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
# Create the lock directory.
# Note: use `[/.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:

File diff suppressed because it is too large Load Diff

@ -1,9 +1,9 @@
#! /bin/sh
# Configuration validation subroutine script.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
timestamp='2004-06-24'
timestamp='2005-07-08'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@ -21,14 +21,15 @@ timestamp='2004-06-24'
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.
# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
# 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Please send patches to <config-patches@gnu.org>. Submit a context
# diff and a properly formatted ChangeLog entry.
#
@ -70,7 +71,7 @@ Report bugs and patches to <config-patches@gnu.org>."
version="\
GNU config.sub ($timestamp)
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
@ -83,11 +84,11 @@ Try \`$me --help' for more information."
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
echo "$timestamp" ; exit 0 ;;
echo "$timestamp" ; exit ;;
--version | -v )
echo "$version" ; exit 0 ;;
echo "$version" ; exit ;;
--help | --h* | -h )
echo "$usage"; exit 0 ;;
echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
@ -99,7 +100,7 @@ while test $# -gt 0 ; do
*local*)
# First pass through any local machine types.
echo $1
exit 0;;
exit ;;
* )
break ;;
@ -231,13 +232,14 @@ case $basic_machine in
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| am33_2.0 \
| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
| bfin \
| c4x | clipper \
| d10v | d30v | dlx | dsp16xx \
| fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
| m32r | m32rle | m68000 | m68k | m88k | mcore \
| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
@ -246,6 +248,7 @@ case $basic_machine in
| mips64vr4100 | mips64vr4100el \
| mips64vr4300 | mips64vr4300el \
| mips64vr5000 | mips64vr5000el \
| mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
| mipsisa64 | mipsisa64el \
@ -254,23 +257,28 @@ case $basic_machine in
| mipsisa64sr71k | mipsisa64sr71kel \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
| ms1 \
| msp430 \
| ns16k | ns32k \
| openrisc | or32 \
| or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
| pyramid \
| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \
| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
| sparcv8 | sparcv9 | sparcv9b \
| strongarm \
| tahoe | thumb | tic4x | tic80 | tron \
| v850 | v850e \
| we32k \
| x86 | xscale | xstormy16 | xtensa \
| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
| z8k)
basic_machine=$basic_machine-unknown
;;
m32c)
basic_machine=$basic_machine-unknown
;;
m6811 | m68hc11 | m6812 | m68hc12)
# Motorola 68HC11/12.
basic_machine=$basic_machine-unknown
@ -298,7 +306,7 @@ case $basic_machine in
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* \
| bs2000-* \
| bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
| clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
@ -310,7 +318,7 @@ case $basic_machine in
| ip2k-* | iq2000-* \
| m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
| m88110-* | m88k-* | mcore-* \
| m88110-* | m88k-* | maxq-* | mcore-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
@ -319,6 +327,7 @@ case $basic_machine in
| mips64vr4100-* | mips64vr4100el-* \
| mips64vr4300-* | mips64vr4300el-* \
| mips64vr5000-* | mips64vr5000el-* \
| mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
| mipsisa64-* | mipsisa64el-* \
@ -327,6 +336,7 @@ case $basic_machine in
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipstx39-* | mipstx39el-* \
| mmix-* \
| ms1-* \
| msp430-* \
| none-* | np1-* | ns16k-* | ns32k-* \
| orion-* \
@ -334,20 +344,23 @@ case $basic_machine in
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
| pyramid-* \
| romp-* | rs6000-* \
| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
| sparclite-* \
| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
| tahoe-* | thumb-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tron-* \
| v850-* | v850e-* | vax-* \
| we32k-* \
| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
| xtensa-* \
| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
| xstormy16-* | xtensa-* \
| ymp-* \
| z8k-*)
;;
m32c-*)
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
386bsd)
@ -457,6 +470,9 @@ case $basic_machine in
crds | unos)
basic_machine=m68k-crds
;;
crisv32 | crisv32-* | etraxfs*)
basic_machine=crisv32-axis
;;
cris | cris-* | etrax*)
basic_machine=cris-axis
;;
@ -486,6 +502,10 @@ case $basic_machine in
basic_machine=m88k-motorola
os=-sysv3
;;
djgpp)
basic_machine=i586-pc
os=-msdosdjgpp
;;
dpx20 | dpx20-*)
basic_machine=rs6000-bull
os=-bosx
@ -751,9 +771,8 @@ case $basic_machine in
basic_machine=hppa1.1-oki
os=-proelf
;;
or32 | or32-*)
openrisc | openrisc-*)
basic_machine=or32-unknown
os=-coff
;;
os400)
basic_machine=powerpc-ibm
@ -1026,6 +1045,10 @@ case $basic_machine in
basic_machine=hppa1.1-winbond
os=-proelf
;;
xbox)
basic_machine=i686-pc
os=-mingw32
;;
xps | xps100)
basic_machine=xps100-honeywell
;;
@ -1075,12 +1098,9 @@ case $basic_machine in
we32k)
basic_machine=we32k-att
;;
sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
basic_machine=sh-unknown
;;
sh64)
basic_machine=sh64-unknown
;;
sparc | sparcv8 | sparcv9 | sparcv9b)
basic_machine=sparc-sun
;;
@ -1167,7 +1187,8 @@ case $os in
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
| -skyos* | -haiku*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@ -1185,7 +1206,7 @@ case $os in
os=`echo $os | sed -e 's|nto|nto-qnx|'`
;;
-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
| -windows* | -osx | -abug | -netware* | -os9* | -beos* \
| -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
| -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
;;
-mac*)
@ -1294,6 +1315,9 @@ case $os in
-kaos*)
os=-kaos
;;
-zvmoe)
os=-zvmoe
;;
-none)
;;
*)
@ -1371,6 +1395,9 @@ case $basic_machine in
*-be)
os=-beos
;;
*-haiku)
os=-haiku
;;
*-ibm)
os=-aix
;;
@ -1542,7 +1569,7 @@ case $basic_machine in
esac
echo $basic_machine$os
exit 0
exit
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)

@ -1,7 +1,9 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
# Copyright 1999, 2000, 2003 Free Software Foundation, Inc.
scriptversion=2005-07-09.11
# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@ -15,8 +17,8 @@
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@ -25,22 +27,45 @@
# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
case $1 in
'')
echo "$0: No command. Try \`$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.
Environment variables:
depmode Dependency tracking mode.
source Source file read by `PROGRAMS ARGS'.
object Object file output by `PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputing dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "depcomp $scriptversion"
exit $?
;;
esac
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# `libtool' can also be set to `yes' or `no'.
if test -z "$depfile"; then
base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
dir=`echo "$object" | sed 's,/.*$,/,'`
if test "$dir" = "$object"; then
dir=
fi
# FIXME: should be _deps on DOS.
depfile="$dir.deps/$base"
fi
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.