diff --git a/INSTALL b/INSTALL
index 40ecfbe867..23e5f25d0e 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,47 +1,236 @@
-**************************************** NOTICE *******************************
-You MUST own the destination path of /usr/local/freeswitch for the project to 
-build properly!  The alternative is to pick a different prefix with ./configure
---prefix=/my/special/place .
-*******************************************************************************
+Installation Instructions
+*************************
 
-UNIX:
-	You will need 'wget' installed in your path so the build system
-	can download the dependancies.
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
 
-1) Prepare Automake
-	./configure
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
 
-2) Edit modules.conf and adjust to taste.
+Basic Installation
+==================
 
-3) Choose one of the following:
+These are generic installation instructions.
 
-	*) Build The Entire Project (reccommended)
-	   make installall
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
 
-	*) Do it yourself step by step:
-	   make
-	   make install
-	   make modules
-	   make install_mod
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
 
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
 
-	*) Rebuild all the dependancies
-	   make megaclean 
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
 
-  *) Build freeswitch without automatically installing the support libraries (you will need to manually build them all):
-     make nodepends
+The simplest way to compile this package is:
 
-Windows 32:
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
 
-	Requires: Microsoft Visual Studio 2005 or 
-	Visual C++ 2005 Express Edition and Platform SDK
-	Internet connectivity to download dependency libraries
-						
-1) Open /w32/vsnet/Freeswitch.sln
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
 
-2) Choose Release or Debug build
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).  Here is a another example:
+
+     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
 
-3) Build solution or your choice of modules using the ide.
-	
-	
-	
diff --git a/Makefile.am b/Makefile.am
index eb99a09f2d..359b83e5e7 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -5,40 +5,26 @@ SUBDIRS =
 AUTOMAKE_OPTS = gnu foreign
 NAME=freeswitch
 PREFIX=$(prefix)
+
+AM_CFLAGS       = $(new_AM_CFLAGS)
+AM_CPPFLAGS = $(AM_CFLAGS)
+AM_LDFLAGS = $(new_AM_LDFLAGS)
+
 APR_CONFIG=$(prefix)/bin/apr-1-config
 APU_CONFIG=$(prefix)/bin/apu-1-config
-AM_CFLAGS  = -I$(PREFIX)/include $(shell $(APR_CONFIG) --cflags --cppflags --includes) -I${prefix}/include/srtp
-AM_LDFLAGS = -L$(PREFIX)/lib
+AM_CFLAGS  += -I$(PREFIX)/include $(shell $(APR_CONFIG) --cflags --cppflags --includes) -I${prefix}/include/srtp
+AM_LDFLAGS += -L$(PREFIX)/lib
 AM_LDFLAGS += $(shell $(APR_CONFIG) --link-ld --libs )
 AM_CFLAGS  += $(shell $(APU_CONFIG) --includes) 
 AM_LDFLAGS += $(shell $(APU_CONFIG) --link-ld --libs )
-AM_LDFLAGS += -lm -L/usr/local/lib/db42 -L/usr/local/lib 
+AM_LDFLAGS += -lm -L/usr/local/lib/db42 -L/usr/local/lib
+AM_LDFLAGS += -lsqlite3 -lpcre
 OSARCH=$(shell uname -s)
-if ISLINUX
-AM_LDFLAGS += -Wl,-E
-endif
 
 if CRASHPROT
 AM_CFLAGS += -DCRASH_PROT
 endif
 
-AM_CFGARGS =
-if IS64BITLINUX
-AM_CFLAGS += -m64 -march=k8 -fPIC -D_64BIT_MACHINE_
-AM_CFGARGS += --enable-64bit
-endif
-
-#put elsif win here
-if ISMAC
-SOLINK=-dynamic -bundle -undefined suppress -force_flat_namespace
-AM_CFLAGS += -DMACOSX
-DYNAMIC_LIB_EXTEN=dylib
-else
-SOLINK=-shared -Xlinker -x
-DYNAMIC_LIB_EXTEN=so
-endif
-
-AM_CFLAGS  += -fPIC -Wall
 AM_CFLAGS  +=-I$(PWD)/src/sqlite -I$(PWD) -I$(PWD)/src/include -I$(PREFIX)/include
 AM_CFLAGS 	+= -DSWITCH_MOD_DIR=\"$(PREFIX)/mod\"
 AM_CFLAGS	+= -DSWITCH_PREFIX_DIR=\"$(PREFIX)\"
@@ -127,7 +113,7 @@ CLEANFILES = src/include/switch_version.h scripts/fsxs
 
 
 lib_LTLIBRARIES		= libfreeswitch.la
-libfreeswitch_la_CFLAGS	= $(AM_CFLAGS) -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -std=c99 
+libfreeswitch_la_CFLAGS	= $(AM_CFLAGS)
 libfreeswitch_la_LDFLAGS	= -version-info 1:0:0
 libfreeswitch_la_LIBADD  = -lteletone -lresample -lsrtp -lsqlite3 -lspeakup -lpcre
 nodist_libfreeswitch_la_SOURCES = src/include/switch_version.h
@@ -187,7 +173,7 @@ modules: $(NAME)
 	@./build/addenv.sh build/freeswitch.env DYNAMIC_LIB_EXTEN "$(DYNAMIC_LIB_EXTEN)"
 	@./build/addenv.sh build/freeswitch.env SOLINK "$(SOLINK)"
 	@./build/addenv.sh build/freeswitch.env LDFLAGS "$(AM_LDFLAGS) -lfreeswitch"
-	@./build/addenv.sh build/freeswitch.env CFLAGS "-Werror $(AM_CFLAGS)"
+	@./build/addenv.sh build/freeswitch.env CFLAGS "$(AM_CFLAGS)"
 	@./build/addenv.sh build/freeswitch.env CC "$(CC)"
 	@./build/addenv.sh build/freeswitch.env CFGARGS "$(AM_CFGARGS)"
 	@cd src/mod && for i in `cat ../../modules.conf | grep -v \#` ; do echo making $$i ; $(PWD)/build/modmake.sh $(MAKE) $(PWD) $$i || exit 1; done
@@ -228,7 +214,7 @@ install_mod: modules
 	@./build/addenv.sh build/freeswitch.env OSARCH "$(OSARCH)"
 	@./build/addenv.sh build/freeswitch.env SOLINK "$(SOLINK)"
 	@./build/addenv.sh build/freeswitch.env LDFLAGS "$(AM_LDFLAGS) -lfreeswitch"
-	@./build/addenv.sh build/freeswitch.env CFLAGS "-Werror $(AM_CFLAGS)"
+	@./build/addenv.sh build/freeswitch.env CFLAGS "$(AM_CFLAGS)"
 	@./build/addenv.sh build/freeswitch.env CC "$(CC)"
 	@cd src/mod && for i in `cat ../../modules.conf | grep -v \#` ; do echo making install $$i ; $(PWD)/build/modmake.sh $(MAKE) $(PWD) $$i install || exit 1; done
 	@rm -f build/freeswitch.env
@@ -251,7 +237,7 @@ scripts/fsxs: scripts/fsxs.in
 	    -e "s,@INSTALL\@,$(INSTALL)," \
 	    -e "s,@MKINSTALLDIRS\@,$(mkdir_p)," \
 	    \
-	    -e "s|@CFLAGS\@|$(CFLAGS) -fPIC $(shell $(APR_CONFIG) --cflags --cppflags)|" \
+	    -e "s|@CFLAGS\@|$(CFLAGS) $(shell $(APR_CONFIG) --cflags --cppflags)|" \
 	    -e "s|@INCLUDES\@|-I$(PREFIX)/include $(shell $(APR_CONFIG) --includes) $(shell $(APU_CONFIG) --includes)|" \
 	    -e "s|@SOLINK\@|$(SOLINK)|" \
 	    -e "s|@LDFLAGS\@|-L$(PREFIX)/lib|" \
diff --git a/Makefile.in b/Makefile.in
index d3f00619bc..7c01b4c867 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.2 from Makefile.am.
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
+# 2003, 2004, 2005  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +17,6 @@
 
 
 
-SOURCES = $(libfreeswitch_la_SOURCES) $(nodist_libfreeswitch_la_SOURCES) $(freeswitch_SOURCES)
-
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
 VPATH = @srcdir@
@@ -41,11 +39,7 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-@ISLINUX_TRUE@am__append_1 = -Wl,-E
-@CRASHPROT_TRUE@am__append_2 = -DCRASH_PROT
-@IS64BITLINUX_TRUE@am__append_3 = -m64 -march=k8 -fPIC -D_64BIT_MACHINE_
-@IS64BITLINUX_TRUE@am__append_4 = --enable-64bit
-@ISMAC_TRUE@am__append_5 = -DMACOSX
+@CRASHPROT_TRUE@am__append_1 = -DCRASH_PROT
 bin_PROGRAMS = freeswitch$(EXEEXT)
 DIST_COMMON = README $(am__configure_deps) $(library_include_HEADERS) \
 	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
@@ -58,7 +52,14 @@ DIST_COMMON = README $(am__configure_deps) $(library_include_HEADERS) \
 	build/config/ltmain.sh build/config/missing
 subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__aclocal_m4_deps =  \
+	$(top_srcdir)/build/config/ax_compiler_vendor.m4 \
+	$(top_srcdir)/build/config/ax_cflags_warn_all_ansi.m4 \
+	$(top_srcdir)/build/config/ax_cc_maxopt.m4 \
+	$(top_srcdir)/build/config/ax_check_compiler_flags.m4 \
+	$(top_srcdir)/build/config/ac_gcc_archflag.m4 \
+	$(top_srcdir)/build/config/ac_gcc_x86_cpuid.m4 \
+	$(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
@@ -105,11 +106,11 @@ depcomp = $(SHELL) $(top_srcdir)/build/config/depcomp
 am__depfiles_maybe = depfiles
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \
+LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
 	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
 	$(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(AM_LDFLAGS) $(LDFLAGS) -o $@
 SOURCES = $(libfreeswitch_la_SOURCES) \
 	$(nodist_libfreeswitch_la_SOURCES) $(freeswitch_SOURCES)
@@ -159,6 +160,7 @@ CXXFLAGS = @CXXFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DYNAMIC_LIB_EXTEN = @DYNAMIC_LIB_EXTEN@
 ECHO = @ECHO@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
@@ -192,11 +194,15 @@ PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PRTDIAG = @PRTDIAG@
 RANLIB = @RANLIB@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
+SOLINK = @SOLINK@
 STRIP = @STRIP@
 VERSION = @VERSION@
+WANT_DEBUG_FALSE = @WANT_DEBUG_FALSE@
+WANT_DEBUG_TRUE = @WANT_DEBUG_TRUE@
 ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
@@ -233,6 +239,8 @@ libexecdir = @libexecdir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
+new_AM_CFLAGS = @new_AM_CFLAGS@
+new_AM_LDFLAGS = @new_AM_LDFLAGS@
 oldincludedir = @oldincludedir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
@@ -245,14 +253,11 @@ SUBDIRS =
 AUTOMAKE_OPTS = gnu foreign
 NAME = freeswitch
 PREFIX = $(prefix)
-APR_CONFIG = $(prefix)/bin/apr-1-config
-APU_CONFIG = $(prefix)/bin/apu-1-config
-AM_CFLAGS = -I$(PREFIX)/include $(shell $(APR_CONFIG) --cflags \
-	--cppflags --includes) -I${prefix}/include/srtp $(shell \
-	$(APU_CONFIG) --includes) $(am__append_2) $(am__append_3) \
-	$(am__append_5) -fPIC -Wall -I$(PWD)/src/sqlite -I$(PWD) \
-	-I$(PWD)/src/include -I$(PREFIX)/include \
-	-DSWITCH_MOD_DIR=\"$(PREFIX)/mod\" \
+AM_CFLAGS = $(new_AM_CFLAGS) -I$(PREFIX)/include $(shell $(APR_CONFIG) \
+	--cflags --cppflags --includes) -I${prefix}/include/srtp \
+	$(shell $(APU_CONFIG) --includes) $(am__append_1) \
+	-I$(PWD)/src/sqlite -I$(PWD) -I$(PWD)/src/include \
+	-I$(PREFIX)/include -DSWITCH_MOD_DIR=\"$(PREFIX)/mod\" \
 	-DSWITCH_PREFIX_DIR=\"$(PREFIX)\" \
 	-DSWITCH_CONF_DIR=\"$(PREFIX)/conf\" \
 	-DSWITCH_DB_DIR=\"$(PREFIX)/db\" \
@@ -260,17 +265,13 @@ AM_CFLAGS = -I$(PREFIX)/include $(shell $(APR_CONFIG) --cflags \
 	-DSWITCH_SCRIPT_DIR=\"$(PREFIX)/scripts\" \
 	-DSWITCH_HTDOCS_DIR=\"$(PREFIX)/htdocs\" \
 	-DSWITCH_GRAMMAR_DIR=\"$(PREFIX)/grammar\"
-AM_LDFLAGS = -L$(PREFIX)/lib $(shell $(APR_CONFIG) --link-ld --libs ) \
-	$(shell $(APU_CONFIG) --link-ld --libs ) -lm \
-	-L/usr/local/lib/db42 -L/usr/local/lib $(am__append_1)
+AM_CPPFLAGS = $(AM_CFLAGS)
+AM_LDFLAGS = $(new_AM_LDFLAGS) -L$(PREFIX)/lib $(shell $(APR_CONFIG) \
+	--link-ld --libs ) $(shell $(APU_CONFIG) --link-ld --libs ) \
+	-lm -L/usr/local/lib/db42 -L/usr/local/lib -lsqlite3 -lpcre
+APR_CONFIG = $(prefix)/bin/apr-1-config
+APU_CONFIG = $(prefix)/bin/apu-1-config
 OSARCH = $(shell uname -s)
-AM_CFGARGS = $(am__append_4)
-@ISMAC_FALSE@SOLINK = -shared -Xlinker -x
-
-#put elsif win here
-@ISMAC_TRUE@SOLINK = -dynamic -bundle -undefined suppress -force_flat_namespace
-@ISMAC_FALSE@DYNAMIC_LIB_EXTEN = so
-@ISMAC_TRUE@DYNAMIC_LIB_EXTEN = dylib
 libfreeswitch_la_SOURCES = \
 src/include/switch_am_config.h\
 src/include/switch.h\
@@ -345,7 +346,7 @@ src/include/switch_xml.h
 BUILT_SOURCES = version depends
 CLEANFILES = src/include/switch_version.h scripts/fsxs
 lib_LTLIBRARIES = libfreeswitch.la
-libfreeswitch_la_CFLAGS = $(AM_CFLAGS) -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -std=c99 
+libfreeswitch_la_CFLAGS = $(AM_CFLAGS)
 libfreeswitch_la_LDFLAGS = -version-info 1:0:0
 libfreeswitch_la_LIBADD = -lteletone -lresample -lsrtp -lsqlite3 -lspeakup -lpcre
 nodist_libfreeswitch_la_SOURCES = src/include/switch_version.h
@@ -537,109 +538,109 @@ distclean-compile:
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 libfreeswitch_la-switch_rtp.lo: src/switch_rtp.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_rtp.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_rtp.Tpo" -c -o libfreeswitch_la-switch_rtp.lo `test -f 'src/switch_rtp.c' || echo '$(srcdir)/'`src/switch_rtp.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_rtp.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_rtp.Tpo" -c -o libfreeswitch_la-switch_rtp.lo `test -f 'src/switch_rtp.c' || echo '$(srcdir)/'`src/switch_rtp.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_rtp.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_rtp.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_rtp.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_rtp.c' object='libfreeswitch_la-switch_rtp.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_rtp.lo `test -f 'src/switch_rtp.c' || echo '$(srcdir)/'`src/switch_rtp.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_rtp.lo `test -f 'src/switch_rtp.c' || echo '$(srcdir)/'`src/switch_rtp.c
 
 libfreeswitch_la-switch_buffer.lo: src/switch_buffer.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_buffer.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_buffer.Tpo" -c -o libfreeswitch_la-switch_buffer.lo `test -f 'src/switch_buffer.c' || echo '$(srcdir)/'`src/switch_buffer.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_buffer.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_buffer.Tpo" -c -o libfreeswitch_la-switch_buffer.lo `test -f 'src/switch_buffer.c' || echo '$(srcdir)/'`src/switch_buffer.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_buffer.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_buffer.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_buffer.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_buffer.c' object='libfreeswitch_la-switch_buffer.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_buffer.lo `test -f 'src/switch_buffer.c' || echo '$(srcdir)/'`src/switch_buffer.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_buffer.lo `test -f 'src/switch_buffer.c' || echo '$(srcdir)/'`src/switch_buffer.c
 
 libfreeswitch_la-switch_caller.lo: src/switch_caller.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_caller.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_caller.Tpo" -c -o libfreeswitch_la-switch_caller.lo `test -f 'src/switch_caller.c' || echo '$(srcdir)/'`src/switch_caller.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_caller.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_caller.Tpo" -c -o libfreeswitch_la-switch_caller.lo `test -f 'src/switch_caller.c' || echo '$(srcdir)/'`src/switch_caller.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_caller.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_caller.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_caller.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_caller.c' object='libfreeswitch_la-switch_caller.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_caller.lo `test -f 'src/switch_caller.c' || echo '$(srcdir)/'`src/switch_caller.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_caller.lo `test -f 'src/switch_caller.c' || echo '$(srcdir)/'`src/switch_caller.c
 
 libfreeswitch_la-switch_channel.lo: src/switch_channel.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_channel.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_channel.Tpo" -c -o libfreeswitch_la-switch_channel.lo `test -f 'src/switch_channel.c' || echo '$(srcdir)/'`src/switch_channel.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_channel.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_channel.Tpo" -c -o libfreeswitch_la-switch_channel.lo `test -f 'src/switch_channel.c' || echo '$(srcdir)/'`src/switch_channel.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_channel.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_channel.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_channel.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_channel.c' object='libfreeswitch_la-switch_channel.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_channel.lo `test -f 'src/switch_channel.c' || echo '$(srcdir)/'`src/switch_channel.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_channel.lo `test -f 'src/switch_channel.c' || echo '$(srcdir)/'`src/switch_channel.c
 
 libfreeswitch_la-switch_config.lo: src/switch_config.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_config.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_config.Tpo" -c -o libfreeswitch_la-switch_config.lo `test -f 'src/switch_config.c' || echo '$(srcdir)/'`src/switch_config.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_config.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_config.Tpo" -c -o libfreeswitch_la-switch_config.lo `test -f 'src/switch_config.c' || echo '$(srcdir)/'`src/switch_config.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_config.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_config.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_config.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_config.c' object='libfreeswitch_la-switch_config.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_config.lo `test -f 'src/switch_config.c' || echo '$(srcdir)/'`src/switch_config.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_config.lo `test -f 'src/switch_config.c' || echo '$(srcdir)/'`src/switch_config.c
 
 libfreeswitch_la-switch_console.lo: src/switch_console.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_console.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_console.Tpo" -c -o libfreeswitch_la-switch_console.lo `test -f 'src/switch_console.c' || echo '$(srcdir)/'`src/switch_console.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_console.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_console.Tpo" -c -o libfreeswitch_la-switch_console.lo `test -f 'src/switch_console.c' || echo '$(srcdir)/'`src/switch_console.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_console.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_console.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_console.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_console.c' object='libfreeswitch_la-switch_console.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_console.lo `test -f 'src/switch_console.c' || echo '$(srcdir)/'`src/switch_console.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_console.lo `test -f 'src/switch_console.c' || echo '$(srcdir)/'`src/switch_console.c
 
 libfreeswitch_la-switch_core.lo: src/switch_core.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_core.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_core.Tpo" -c -o libfreeswitch_la-switch_core.lo `test -f 'src/switch_core.c' || echo '$(srcdir)/'`src/switch_core.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_core.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_core.Tpo" -c -o libfreeswitch_la-switch_core.lo `test -f 'src/switch_core.c' || echo '$(srcdir)/'`src/switch_core.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_core.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_core.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_core.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_core.c' object='libfreeswitch_la-switch_core.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_core.lo `test -f 'src/switch_core.c' || echo '$(srcdir)/'`src/switch_core.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_core.lo `test -f 'src/switch_core.c' || echo '$(srcdir)/'`src/switch_core.c
 
 libfreeswitch_la-switch_loadable_module.lo: src/switch_loadable_module.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_loadable_module.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_loadable_module.Tpo" -c -o libfreeswitch_la-switch_loadable_module.lo `test -f 'src/switch_loadable_module.c' || echo '$(srcdir)/'`src/switch_loadable_module.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_loadable_module.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_loadable_module.Tpo" -c -o libfreeswitch_la-switch_loadable_module.lo `test -f 'src/switch_loadable_module.c' || echo '$(srcdir)/'`src/switch_loadable_module.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_loadable_module.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_loadable_module.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_loadable_module.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_loadable_module.c' object='libfreeswitch_la-switch_loadable_module.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_loadable_module.lo `test -f 'src/switch_loadable_module.c' || echo '$(srcdir)/'`src/switch_loadable_module.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_loadable_module.lo `test -f 'src/switch_loadable_module.c' || echo '$(srcdir)/'`src/switch_loadable_module.c
 
 libfreeswitch_la-switch_utils.lo: src/switch_utils.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_utils.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_utils.Tpo" -c -o libfreeswitch_la-switch_utils.lo `test -f 'src/switch_utils.c' || echo '$(srcdir)/'`src/switch_utils.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_utils.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_utils.Tpo" -c -o libfreeswitch_la-switch_utils.lo `test -f 'src/switch_utils.c' || echo '$(srcdir)/'`src/switch_utils.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_utils.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_utils.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_utils.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_utils.c' object='libfreeswitch_la-switch_utils.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_utils.lo `test -f 'src/switch_utils.c' || echo '$(srcdir)/'`src/switch_utils.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_utils.lo `test -f 'src/switch_utils.c' || echo '$(srcdir)/'`src/switch_utils.c
 
 libfreeswitch_la-switch_event.lo: src/switch_event.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_event.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_event.Tpo" -c -o libfreeswitch_la-switch_event.lo `test -f 'src/switch_event.c' || echo '$(srcdir)/'`src/switch_event.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_event.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_event.Tpo" -c -o libfreeswitch_la-switch_event.lo `test -f 'src/switch_event.c' || echo '$(srcdir)/'`src/switch_event.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_event.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_event.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_event.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_event.c' object='libfreeswitch_la-switch_event.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_event.lo `test -f 'src/switch_event.c' || echo '$(srcdir)/'`src/switch_event.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_event.lo `test -f 'src/switch_event.c' || echo '$(srcdir)/'`src/switch_event.c
 
 libfreeswitch_la-switch_resample.lo: src/switch_resample.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_resample.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_resample.Tpo" -c -o libfreeswitch_la-switch_resample.lo `test -f 'src/switch_resample.c' || echo '$(srcdir)/'`src/switch_resample.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_resample.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_resample.Tpo" -c -o libfreeswitch_la-switch_resample.lo `test -f 'src/switch_resample.c' || echo '$(srcdir)/'`src/switch_resample.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_resample.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_resample.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_resample.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_resample.c' object='libfreeswitch_la-switch_resample.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_resample.lo `test -f 'src/switch_resample.c' || echo '$(srcdir)/'`src/switch_resample.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_resample.lo `test -f 'src/switch_resample.c' || echo '$(srcdir)/'`src/switch_resample.c
 
 libfreeswitch_la-switch_ivr.lo: src/switch_ivr.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_ivr.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_ivr.Tpo" -c -o libfreeswitch_la-switch_ivr.lo `test -f 'src/switch_ivr.c' || echo '$(srcdir)/'`src/switch_ivr.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_ivr.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_ivr.Tpo" -c -o libfreeswitch_la-switch_ivr.lo `test -f 'src/switch_ivr.c' || echo '$(srcdir)/'`src/switch_ivr.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_ivr.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_ivr.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_ivr.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_ivr.c' object='libfreeswitch_la-switch_ivr.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_ivr.lo `test -f 'src/switch_ivr.c' || echo '$(srcdir)/'`src/switch_ivr.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_ivr.lo `test -f 'src/switch_ivr.c' || echo '$(srcdir)/'`src/switch_ivr.c
 
 libfreeswitch_la-switch_stun.lo: src/switch_stun.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_stun.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_stun.Tpo" -c -o libfreeswitch_la-switch_stun.lo `test -f 'src/switch_stun.c' || echo '$(srcdir)/'`src/switch_stun.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_stun.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_stun.Tpo" -c -o libfreeswitch_la-switch_stun.lo `test -f 'src/switch_stun.c' || echo '$(srcdir)/'`src/switch_stun.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_stun.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_stun.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_stun.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_stun.c' object='libfreeswitch_la-switch_stun.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_stun.lo `test -f 'src/switch_stun.c' || echo '$(srcdir)/'`src/switch_stun.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_stun.lo `test -f 'src/switch_stun.c' || echo '$(srcdir)/'`src/switch_stun.c
 
 libfreeswitch_la-switch_log.lo: src/switch_log.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_log.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_log.Tpo" -c -o libfreeswitch_la-switch_log.lo `test -f 'src/switch_log.c' || echo '$(srcdir)/'`src/switch_log.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_log.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_log.Tpo" -c -o libfreeswitch_la-switch_log.lo `test -f 'src/switch_log.c' || echo '$(srcdir)/'`src/switch_log.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_log.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_log.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_log.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_log.c' object='libfreeswitch_la-switch_log.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_log.lo `test -f 'src/switch_log.c' || echo '$(srcdir)/'`src/switch_log.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_log.lo `test -f 'src/switch_log.c' || echo '$(srcdir)/'`src/switch_log.c
 
 libfreeswitch_la-switch_xml.lo: src/switch_xml.c
-@am__fastdepCC_TRUE@	if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_xml.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_xml.Tpo" -c -o libfreeswitch_la-switch_xml.lo `test -f 'src/switch_xml.c' || echo '$(srcdir)/'`src/switch_xml.c; \
+@am__fastdepCC_TRUE@	if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -MT libfreeswitch_la-switch_xml.lo -MD -MP -MF "$(DEPDIR)/libfreeswitch_la-switch_xml.Tpo" -c -o libfreeswitch_la-switch_xml.lo `test -f 'src/switch_xml.c' || echo '$(srcdir)/'`src/switch_xml.c; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libfreeswitch_la-switch_xml.Tpo" "$(DEPDIR)/libfreeswitch_la-switch_xml.Plo"; else rm -f "$(DEPDIR)/libfreeswitch_la-switch_xml.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='src/switch_xml.c' object='libfreeswitch_la-switch_xml.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_xml.lo `test -f 'src/switch_xml.c' || echo '$(srcdir)/'`src/switch_xml.c
+@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfreeswitch_la_CFLAGS) $(CFLAGS) -c -o libfreeswitch_la-switch_xml.lo `test -f 'src/switch_xml.c' || echo '$(srcdir)/'`src/switch_xml.c
 
 freeswitch-switch.o: src/switch.c
 @am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(freeswitch_CFLAGS) $(CFLAGS) -MT freeswitch-switch.o -MD -MP -MF "$(DEPDIR)/freeswitch-switch.Tpo" -c -o freeswitch-switch.o `test -f 'src/switch.c' || echo '$(srcdir)/'`src/switch.c; \
@@ -689,7 +690,13 @@ uninstall-library_includeHEADERS:
 #     (which will cause the Makefiles to be regenerated when you run `make');
 # (2) otherwise, pass the desired values on the `make' command line.
 $(RECURSIVE_TARGETS):
-	@set fnord $$MAKEFLAGS; amf=$$2; \
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
@@ -701,7 +708,7 @@ $(RECURSIVE_TARGETS):
 	    local_target="$$target"; \
 	  fi; \
 	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
@@ -709,7 +716,13 @@ $(RECURSIVE_TARGETS):
 
 mostlyclean-recursive clean-recursive distclean-recursive \
 maintainer-clean-recursive:
-	@set fnord $$MAKEFLAGS; amf=$$2; \
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
 	dot_seen=no; \
 	case "$@" in \
 	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
@@ -730,7 +743,7 @@ maintainer-clean-recursive:
 	    local_target="$$target"; \
 	  fi; \
 	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
@@ -1106,7 +1119,7 @@ modules: $(NAME)
 	@./build/addenv.sh build/freeswitch.env DYNAMIC_LIB_EXTEN "$(DYNAMIC_LIB_EXTEN)"
 	@./build/addenv.sh build/freeswitch.env SOLINK "$(SOLINK)"
 	@./build/addenv.sh build/freeswitch.env LDFLAGS "$(AM_LDFLAGS) -lfreeswitch"
-	@./build/addenv.sh build/freeswitch.env CFLAGS "-Werror $(AM_CFLAGS)"
+	@./build/addenv.sh build/freeswitch.env CFLAGS "$(AM_CFLAGS)"
 	@./build/addenv.sh build/freeswitch.env CC "$(CC)"
 	@./build/addenv.sh build/freeswitch.env CFGARGS "$(AM_CFGARGS)"
 	@cd src/mod && for i in `cat ../../modules.conf | grep -v \#` ; do echo making $$i ; $(PWD)/build/modmake.sh $(MAKE) $(PWD) $$i || exit 1; done
@@ -1147,7 +1160,7 @@ install_mod: modules
 	@./build/addenv.sh build/freeswitch.env OSARCH "$(OSARCH)"
 	@./build/addenv.sh build/freeswitch.env SOLINK "$(SOLINK)"
 	@./build/addenv.sh build/freeswitch.env LDFLAGS "$(AM_LDFLAGS) -lfreeswitch"
-	@./build/addenv.sh build/freeswitch.env CFLAGS "-Werror $(AM_CFLAGS)"
+	@./build/addenv.sh build/freeswitch.env CFLAGS "$(AM_CFLAGS)"
 	@./build/addenv.sh build/freeswitch.env CC "$(CC)"
 	@cd src/mod && for i in `cat ../../modules.conf | grep -v \#` ; do echo making install $$i ; $(PWD)/build/modmake.sh $(MAKE) $(PWD) $$i install || exit 1; done
 	@rm -f build/freeswitch.env
@@ -1170,7 +1183,7 @@ scripts/fsxs: scripts/fsxs.in
 	    -e "s,@INSTALL\@,$(INSTALL)," \
 	    -e "s,@MKINSTALLDIRS\@,$(mkdir_p)," \
 	    \
-	    -e "s|@CFLAGS\@|$(CFLAGS) -fPIC $(shell $(APR_CONFIG) --cflags --cppflags)|" \
+	    -e "s|@CFLAGS\@|$(CFLAGS) $(shell $(APR_CONFIG) --cflags --cppflags)|" \
 	    -e "s|@INCLUDES\@|-I$(PREFIX)/include $(shell $(APR_CONFIG) --includes) $(shell $(APU_CONFIG) --includes)|" \
 	    -e "s|@SOLINK\@|$(SOLINK)|" \
 	    -e "s|@LDFLAGS\@|-L$(PREFIX)/lib|" \
diff --git a/aclocal.m4 b/aclocal.m4
index 8a90c6a124..4723f85008 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.9.2 -*- Autoconf -*-
+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -13,7 +13,7 @@
 
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 
-# serial 47 AC_PROG_LIBTOOL
+# serial 48 AC_PROG_LIBTOOL
 
 
 # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
@@ -123,7 +123,7 @@ esac
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
+Xsed='sed -e 1s/^X//'
 [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
 
 # Same as above, but do not quote variable references.
@@ -143,7 +143,7 @@ rm="rm -f"
 default_ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a `.a' archive for static linking (except M$VC,
+# All known linkers require a `.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
 ltmain="$ac_aux_dir/ltmain.sh"
@@ -163,6 +163,7 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru
 test -z "$AS" && AS=as
 test -z "$CC" && CC=cc
 test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
 test -z "$DLLTOOL" && DLLTOOL=dlltool
 test -z "$LD" && LD=ld
 test -z "$LN_S" && LN_S="ln -s"
@@ -182,15 +183,17 @@ old_postuninstall_cmds=
 if test -n "$RANLIB"; then
   case $host_os in
   openbsd*)
-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
     ;;
   *)
-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
     ;;
   esac
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
 
+_LT_CC_BASENAME([$compiler])
+
 # Only perform the check for file, if the check method requires it
 case $deplibs_check_method in
 file_magic*)
@@ -231,11 +234,56 @@ AC_DEFUN([_LT_AC_SYS_COMPILER],
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 ])# _LT_AC_SYS_COMPILER
 
 
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+AC_DEFUN([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+AC_DEFUN([_LT_COMPILER_BOILERPLATE],
+[ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+AC_DEFUN([_LT_LINKER_BOILERPLATE],
+[ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+])# _LT_LINKER_BOILERPLATE
+
+
 # _LT_AC_SYS_LIBPATH_AIX
 # ----------------------
 # Links a minimal program and checks the executable
@@ -308,15 +356,15 @@ fi
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 if test -z "$ECHO"; then
 if test "X${echo_test_string+set}" != Xset; then
 # find a string as large as possible, as long as the shell can cope with it
   for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
     # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
+    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+       echo_test_string=`eval $cmd` &&
        (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
     then
       break
@@ -485,7 +533,7 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
+    case `/usr/bin/file conftest.o` in
     *32-bit*)
       case $host in
         x86_64-*linux*)
@@ -536,6 +584,22 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
     CFLAGS="$SAVE_CFLAGS"
   fi
   ;;
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)    LD="${LD-ld} -64" ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
 AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
 [*-*-cygwin* | *-*-mingw* | *-*-pw32*)
   AC_CHECK_TOOL(DLLTOOL, dlltool, false)
@@ -567,7 +631,7 @@ AC_CACHE_CHECK([$1], [$2],
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
    (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
@@ -577,8 +641,10 @@ AC_CACHE_CHECK([$1], [$2],
    echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        $2=yes
      fi
    fi
@@ -604,11 +670,16 @@ AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
    LDFLAGS="$LDFLAGS $3"
    printf "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The compiler can only warn and ignore the option if not recognized
+     # The linker can only warn and ignore the option if not recognized
      # So say no if there are warnings
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&AS_MESSAGE_LOG_FD
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         $2=yes
+       fi
      else
        $2=yes
      fi
@@ -667,11 +738,55 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
- *)
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
     # If test is not a shell built-in, we'll probably end up computing a
     # maximum length that is only half of the actual maximum length, but
     # we can't tell.
-    while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+    while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
 	       = "XX$teststring") >/dev/null 2>&1 &&
 	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
 	    lt_cv_sys_max_cmd_len=$new_result &&
@@ -697,7 +812,7 @@ fi
 
 
 # _LT_AC_CHECK_DLFCN
-# --------------------
+# ------------------
 AC_DEFUN([_LT_AC_CHECK_DLFCN],
 [AC_CHECK_HEADERS(dlfcn.h)dnl
 ])# _LT_AC_CHECK_DLFCN
@@ -705,7 +820,7 @@ AC_DEFUN([_LT_AC_CHECK_DLFCN],
 
 # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
 #                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ------------------------------------------------------------------
+# ---------------------------------------------------------------------
 AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
 [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
 if test "$cross_compiling" = yes; then :
@@ -771,17 +886,19 @@ int main ()
       else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
       /* dlclose (self); */
     }
+  else
+    puts (dlerror ());
 
     exit (status);
 }]
 EOF
   if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
     lt_status=$?
     case x$lt_status in
       x$lt_dlno_uscore) $1 ;;
       x$lt_dlneed_uscore) $2 ;;
-      x$lt_unknown|x*) $3 ;;
+      x$lt_dlunknown|x*) $3 ;;
     esac
   else :
     # compilation failed
@@ -793,7 +910,7 @@ rm -fr conftest*
 
 
 # AC_LIBTOOL_DLOPEN_SELF
-# -------------------
+# ----------------------
 AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
 [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
 if test "x$enable_dlopen" != xyes; then
@@ -864,7 +981,7 @@ else
     test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
     save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
     save_LIBS="$LIBS"
     LIBS="$lt_cv_dlopen_libs $LIBS"
@@ -877,7 +994,7 @@ else
     ])
 
     if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
     	  lt_cv_dlopen_self_static, [dnl
 	  _LT_AC_TRY_DLOPEN_SELF(
@@ -925,7 +1042,7 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
    # Note that $ac_compile itself does not contain backslashes and begins
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
    (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
@@ -937,11 +1054,13 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     if test ! -s out/conftest.err; then
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
      fi
    fi
-   chmod u+w .
+   chmod u+w . 2>&AS_MESSAGE_LOG_FD
    $rm conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
@@ -1005,8 +1124,8 @@ AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
 [AC_MSG_CHECKING([how to hardcode library paths into programs])
 _LT_AC_TAGVAR(hardcode_action, $1)=
 if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
+   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
+   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
 
   # We can hardcode non-existant directories.
   if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
@@ -1173,7 +1292,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[[45]]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -1201,7 +1320,8 @@ cygwin* | mingw* | pw32*)
       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $rm \$dlpath'
@@ -1231,7 +1351,7 @@ cygwin* | mingw* | pw32*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
     ;;
@@ -1254,7 +1374,7 @@ darwin* | rhapsody*)
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
   # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
   if test "$GCC" = yes; then
     sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -1289,8 +1409,17 @@ kfreebsd*-gnu)
   dynamic_linker='GNU ld.so'
   ;;
 
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[[123]]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
@@ -1308,14 +1437,19 @@ freebsd*)
   freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
-  *) # from 3.2 on
+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
   esac
   ;;
 
@@ -1335,7 +1469,7 @@ hpux9* | hpux10* | hpux11*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
     shrext_cmds='.so'
     hardcode_into_libs=yes
@@ -1375,6 +1509,18 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
@@ -1432,27 +1578,10 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-    if AC_TRY_EVAL(ac_compile); then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
-
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -1513,8 +1642,13 @@ nto-qnx*)
 
 openbsd*)
   version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
   need_lib_prefix=no
-  need_version=yes
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -1552,13 +1686,6 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
 solaris*)
   version_type=linux
   need_lib_prefix=no
@@ -1584,7 +1711,7 @@ sunos4*)
   need_version=yes
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -1617,6 +1744,29 @@ sysv4*MP*)
   fi
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -1630,6 +1780,11 @@ uts4*)
 esac
 AC_MSG_RESULT([$dynamic_linker])
 test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
 ])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
 
 
@@ -1654,6 +1809,9 @@ if test -f "$ltmain" && test -n "$tagnames"; then
       AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
     fi
   fi
+  if test -z "$LTCFLAGS"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
+  fi
 
   # Extract list of available tagged configurations in $ofile.
   # Note that this assumes the entire list is on one line.
@@ -1680,7 +1838,9 @@ if test -f "$ltmain" && test -n "$tagnames"; then
 
       case $tagname in
       CXX)
-	if test -n "$CXX" && test "X$CXX" != "Xno"; then
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+	    (test "X$CXX" != "Xg++"))) ; then
 	  AC_LIBTOOL_LANG_CXX_CONFIG
 	else
 	  tagname=""
@@ -1742,7 +1902,7 @@ AC_DEFUN([AC_LIBTOOL_DLOPEN],
 
 # AC_LIBTOOL_WIN32_DLL
 # --------------------
-# declare package support for building win32 dll's
+# declare package support for building win32 DLLs
 AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
 [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
 ])# AC_LIBTOOL_WIN32_DLL
@@ -1780,7 +1940,7 @@ AC_ARG_ENABLE([shared],
 
 # AC_DISABLE_SHARED
 # -----------------
-#- set the default shared flag to --disable-shared
+# set the default shared flag to --disable-shared
 AC_DEFUN([AC_DISABLE_SHARED],
 [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
 AC_ENABLE_SHARED(no)
@@ -1916,7 +2076,7 @@ dnl not every word.  This closes a longstanding sh security hole.
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
 	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
@@ -2026,7 +2186,7 @@ AC_CACHE_VAL(lt_cv_path_LD,
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       lt_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
+      # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
@@ -2058,7 +2218,7 @@ AC_PROG_LD_GNU
 AC_DEFUN([AC_PROG_LD_GNU],
 [AC_REQUIRE([AC_PROG_EGREP])dnl
 AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
 case `$LD -v 2>&1 </dev/null` in
 *GNU* | *'with BFD'*)
   lt_cv_prog_gnu_ld=yes
@@ -2085,6 +2245,15 @@ case $reload_flag in
 *) reload_flag=" $reload_flag" ;;
 esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
 ])# AC_PROG_LD_RELOAD_FLAG
 
 
@@ -2118,7 +2287,7 @@ beos*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-bsdi4*)
+bsdi[[45]]*)
   lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
   lt_cv_file_magic_cmd='/usr/bin/file -L'
   lt_cv_file_magic_test_file=/shlib/libc.so
@@ -2141,13 +2310,13 @@ darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd* | kfreebsd*-gnu)
+freebsd* | kfreebsd*-gnu | dragonfly*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
       # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
       lt_cv_file_magic_cmd=/usr/bin/file
       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
       ;;
@@ -2163,7 +2332,7 @@ gnu*)
 
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
     lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
@@ -2179,6 +2348,11 @@ hpux10.20* | hpux11*)
   esac
   ;;
 
+interix3*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+  ;;
+
 irix5* | irix6* | nonstopux*)
   case $LD in
   *-32|*"-32 ") libmagic=32-bit;;
@@ -2191,15 +2365,6 @@ irix5* | irix6* | nonstopux*)
 
 # This must be Linux ELF.
 linux*)
-  case $host_cpu in
-  alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*|x86_64*)
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -2222,12 +2387,10 @@ nto-qnx*)
   ;;
 
 openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
   if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
   else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   fi
   ;;
 
@@ -2235,15 +2398,11 @@ osf3* | osf4* | osf5*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
 solaris*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   case $host_vendor in
   motorola)
     lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
@@ -2264,10 +2423,13 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
   siemens)
     lt_cv_deplibs_check_method=pass_all
     ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
   esac
   ;;
 
-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 esac
@@ -2287,36 +2449,43 @@ AC_DEFUN([AC_PROG_NM],
   # Let the user override the test.
   lt_cv_path_NM="$NM"
 else
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-    if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-      */dev/null* | *'Invalid file or object type'*)
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-        ;;
-      *)
-	case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	*/dev/null*)
-	  lt_cv_path_NM="$tmp_nm -p"
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then 
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
 	  break
 	  ;;
 	*)
-	  lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	  continue # so that we can try to find one that supports BSD flags
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
 	  ;;
 	esac
-      esac
-    fi
+      fi
+    done
+    IFS="$lt_save_ifs"
   done
-  IFS="$lt_save_ifs"
   test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
 fi])
 NM="$lt_cv_path_NM"
@@ -2348,13 +2517,13 @@ esac
 # -----------------------------------
 # sets LIBLTDL to the link flags for the libltdl convenience library and
 # LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
-# DIRECTORY is not provided, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
+# --enable-ltdl-convenience to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
+# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
+# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
+# (note the single quotes!).  If your package is not flat and you're not
+# using automake, define top_builddir and top_srcdir appropriately in
+# the Makefiles.
 AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
 [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
   case $enable_ltdl_convenience in
@@ -2373,13 +2542,13 @@ AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
 # -----------------------------------
 # sets LIBLTDL to the link flags for the libltdl installable library and
 # LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
-# DIRECTORY is not provided and an installed libltdl is not found, it is
-# assumed to be `libltdl'.  LIBLTDL will be prefixed with '${top_builddir}/'
-# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
-# quotes!).  If your package is not flat and you're not using automake,
-# define top_builddir and top_srcdir appropriately in the Makefiles.
+# --enable-ltdl-install to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
+# and an installed libltdl is not found, it is assumed to be `libltdl'.
+# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and top_srcdir
+# appropriately in the Makefiles.
 # In the future, this macro may have to be called after AC_PROG_LIBTOOL.
 AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
 [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
@@ -2417,10 +2586,21 @@ AC_DEFUN([AC_LIBTOOL_CXX],
 # ---------------
 AC_DEFUN([_LT_AC_LANG_CXX],
 [AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
 _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
 ])# _LT_AC_LANG_CXX
 
+# _LT_AC_PROG_CXXCPP
+# ------------------
+AC_DEFUN([_LT_AC_PROG_CXXCPP],
+[
+AC_REQUIRE([AC_PROG_CXX])
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+fi
+])# _LT_AC_PROG_CXXCPP
 
 # AC_LIBTOOL_F77
 # --------------
@@ -2460,7 +2640,7 @@ _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
 
 
 # AC_LIBTOOL_RC
-# --------------
+# -------------
 # enable support for Windows resource files
 AC_DEFUN([AC_LIBTOOL_RC],
 [AC_REQUIRE([LT_AC_PROG_RC])
@@ -2493,36 +2673,9 @@ lt_simple_link_test_code='int main(){return(0);}\n'
 
 _LT_AC_SYS_COMPILER
 
-#
-# Check for any special shared library compilation flags.
-#
-_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
-if test "$GCC" = no; then
-  case $host_os in
-  sco3.2v5*)
-    _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-    ;;
-  esac
-fi
-if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-  AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-  if echo "$old_CC $old_CFLAGS " | grep "[[ 	]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ 	]]" >/dev/null; then :
-  else
-    AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-    _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-  fi
-fi
-
-
-#
-# Check to make sure the static flag actually works.
-#
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-  $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-  [],
-  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
 
 AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
 AC_LIBTOOL_PROG_COMPILER_PIC($1)
@@ -2532,9 +2685,9 @@ AC_LIBTOOL_PROG_LD_SHLIBS($1)
 AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
 AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
 AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF($1)
+AC_LIBTOOL_DLOPEN_SELF
 
-# Report which librarie types wil actually be built
+# Report which library types will actually be built
 AC_MSG_CHECKING([if libtool supports shared libraries])
 AC_MSG_RESULT([$can_build_shared])
 
@@ -2543,7 +2696,7 @@ test "$can_build_shared" = "no" && enable_shared=no
 
 # On AIX, shared libraries and static libraries use the same namespace, and
 # are all built from PIC.
-case "$host_os" in
+case $host_os in
 aix3*)
   test "$enable_shared" = yes && enable_static=no
   if test -n "$RANLIB"; then
@@ -2555,43 +2708,6 @@ aix3*)
 aix4* | aix5*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-  darwin* | rhapsody*)
-  if test "$GCC" = yes; then
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    case "$host_os" in
-    rhapsody* | darwin1.[[012]])
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[[012]])
-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
-            ;;
-        esac
-      fi
-      ;;
-    esac
-    output_verbose_link_cmd='echo'
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-    _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    _LT_AC_TAGVAR(hardcode_direct, $1)=no
-    _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-  else
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
   fi
     ;;
 esac
@@ -2618,7 +2734,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
 AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
 [AC_LANG_PUSH(C++)
 AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
 
 _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_AC_TAGVAR(allow_undefined_flag, $1)=
@@ -2630,6 +2746,7 @@ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
 _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
 _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
 _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
 _LT_AC_TAGVAR(hardcode_automatic, $1)=no
 _LT_AC_TAGVAR(module_cmds, $1)=
 _LT_AC_TAGVAR(module_expsym_cmds, $1)=
@@ -2647,7 +2764,7 @@ _LT_AC_TAGVAR(postdeps, $1)=
 _LT_AC_TAGVAR(compiler_lib_search_path, $1)=
 
 # Source file extension for C++ test sources.
-ac_ext=cc
+ac_ext=cpp
 
 # Object file extension for compiled C++ test sources.
 objext=o
@@ -2657,11 +2774,15 @@ _LT_AC_TAGVAR(objext, $1)=$objext
 lt_simple_compile_test_code="int some_variable = 0;\n"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
+lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n'
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_AC_SYS_COMPILER
 
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
 # Allow CC to be a program name with arguments.
 lt_save_CC=$CC
 lt_save_LD=$LD
@@ -2672,18 +2793,18 @@ lt_save_path_LD=$lt_cv_path_LD
 if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
   lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
 else
-  unset lt_cv_prog_gnu_ld
+  $as_unset lt_cv_prog_gnu_ld
 fi
 if test -n "${lt_cv_path_LDCXX+set}"; then
   lt_cv_path_LD=$lt_cv_path_LDCXX
 else
-  unset lt_cv_path_LD
+  $as_unset lt_cv_path_LD
 fi
 test -z "${LDCXX+set}" || LD=$LDCXX
 CC=${CXX-"c++"}
 compiler=$CC
 _LT_AC_TAGVAR(compiler, $1)=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+_LT_CC_BASENAME([$compiler])
 
 # We don't want -fno-exception wen compiling C++ code, so set the
 # no_builtin_flag separately
@@ -2772,6 +2893,7 @@ case $host_os in
 	    ;;
 	  esac
 	done
+	;;
       esac
 
       exp_sym_flag='-bexport'
@@ -2790,7 +2912,7 @@ case $host_os in
     _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
     if test "$GXX" = yes; then
-      case $host_os in aix4.[012]|aix4.[012].*)
+      case $host_os in aix4.[[012]]|aix4.[[012]].*)
       # We only want to do this on AIX 4.2 and lower, the check
       # below for broken collect2 doesn't work under 4.3+
 	collect2name=`${CC} -print-prog-name=collect2`
@@ -2809,8 +2931,12 @@ case $host_os in
 	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
 	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
 	fi
+	;;
       esac
       shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+	shared_flag="$shared_flag "'${wl}-G'
+      fi
     else
       # not using gcc
       if test "$host_cpu" = ia64; then
@@ -2837,12 +2963,12 @@ case $host_os in
       _LT_AC_SYS_LIBPATH_AIX
       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
      else
       if test "$host_cpu" = ia64; then
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
 	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
       else
 	# Determine the default libpath from the value encoded in an empty executable.
 	_LT_AC_SYS_LIBPATH_AIX
@@ -2851,16 +2977,26 @@ case $host_os in
 	# -berok will link without error, but may produce a broken library.
 	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	# -bexpall does not export symbols beginning with underscore (_)
-	_LT_AC_TAGVAR(always_export_symbols, $1)=yes
 	# Exported symbols can be pulled into shared objects from archives
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	# This is similar to how AIX traditionally builds it's shared libraries.
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	# This is similar to how AIX traditionally builds its shared libraries.
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
       fi
     fi
     ;;
+
+  beos*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+    ;;
+
   chorus*)
     case $cc_basename in
       *)
@@ -2879,7 +3015,7 @@ case $host_os in
     _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
 
     if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       # If the export-symbols file already is a .def file (1st line
       # is EXPORTS), use it as is; otherwise, prepend...
       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
@@ -2888,70 +3024,81 @@ case $host_os in
 	echo EXPORTS > $output_objdir/$soname.def;
 	cat $export_symbols >> $output_objdir/$soname.def;
       fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
     else
       _LT_AC_TAGVAR(ld_shlibs, $1)=no
     fi
   ;;
-
-  darwin* | rhapsody*)
-  if test "$GXX" = yes; then
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    case "$host_os" in
-    rhapsody* | darwin1.[[012]])
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[[012]])
-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
-            ;;
+      darwin* | rhapsody*)
+        case $host_os in
+        rhapsody* | darwin1.[[012]])
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[[012]])
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
         esac
-      fi
-      ;;
-    esac
-    lt_int_apple_cc_single_mod=no
-    output_verbose_link_cmd='echo'
-    if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-      lt_int_apple_cc_single_mod=yes
-    fi
-    if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    else
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    fi
-    _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-    if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    else
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    fi
-    _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    _LT_AC_TAGVAR(hardcode_direct, $1)=no
-    _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-  else
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-  fi
-    ;;
+    if test "$GXX" = yes ; then
+      lt_int_apple_cc_single_mod=no
+      output_verbose_link_cmd='echo'
+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+       lt_int_apple_cc_single_mod=yes
+      fi
+      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      else
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        fi
+        _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          else
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          fi
+            _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
+      fi
+        ;;
 
   dgux*)
     case $cc_basename in
-      ec++)
+      ec++*)
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	;;
-      ghcx)
+      ghcx*)
 	# Green Hills C++ Compiler
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
@@ -2962,14 +3109,14 @@ case $host_os in
 	;;
     esac
     ;;
-  freebsd[12]*)
+  freebsd[[12]]*)
     # C++ shared libraries reported to be fairly broken before switch to ELF
     _LT_AC_TAGVAR(ld_shlibs, $1)=no
     ;;
   freebsd-elf*)
     _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
     ;;
-  freebsd* | kfreebsd*-gnu)
+  freebsd* | kfreebsd*-gnu | dragonfly*)
     # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
     # conventions
     _LT_AC_TAGVAR(ld_shlibs, $1)=yes
@@ -2986,11 +3133,11 @@ case $host_os in
 				# location of the library.
 
     case $cc_basename in
-    CC)
+    CC*)
       # FIXME: insert proper C++ library support
       _LT_AC_TAGVAR(ld_shlibs, $1)=no
       ;;
-    aCC)
+    aCC*)
       _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       # Commands to make compiler produce verbose output that lists
       # what "hidden" libraries, object files and flags are used when
@@ -3000,7 +3147,7 @@ case $host_os in
       # explicitly linking system object files so we need to strip them
       # from the output so that they don't get included in the library
       # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
       ;;
     *)
       if test "$GXX" = yes; then
@@ -3014,34 +3161,23 @@ case $host_os in
     ;;
   hpux10*|hpux11*)
     if test $with_gnu_ld = no; then
-      case "$host_cpu" in
-      hppa*64*)
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+      case $host_cpu in
+      hppa*64*|ia64*)
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-        ;;
-      ia64*)
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
         ;;
       *)
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
 	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
         ;;
       esac
     fi
-    case "$host_cpu" in
-    hppa*64*)
+    case $host_cpu in
+    hppa*64*|ia64*)
       _LT_AC_TAGVAR(hardcode_direct, $1)=no
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
-    ia64*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
-      ;;
     *)
       _LT_AC_TAGVAR(hardcode_direct, $1)=yes
       _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
@@ -3051,14 +3187,17 @@ case $host_os in
     esac
 
     case $cc_basename in
-      CC)
+      CC*)
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	;;
-      aCC)
-	case "$host_cpu" in
-	hppa*64*|ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+      aCC*)
+	case $host_cpu in
+	hppa*64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	  ;;
 	*)
 	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
@@ -3077,9 +3216,12 @@ case $host_os in
       *)
 	if test "$GXX" = yes; then
 	  if test $with_gnu_ld = no; then
-	    case "$host_cpu" in
-	    ia64*|hppa*64*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+	    case $host_cpu in
+	    hppa*64*)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    ia64*)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	      ;;
 	    *)
 	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
@@ -3093,11 +3235,25 @@ case $host_os in
 	;;
     esac
     ;;
+  interix3*)
+    _LT_AC_TAGVAR(hardcode_direct, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+    # Instead, shared libraries are loaded at an image base (0x10000000 by
+    # default) and relocated if they conflict, which is a slow very memory
+    # consuming and fragmenting process.  To avoid this, we pick a random,
+    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    ;;
   irix5* | irix6*)
     case $cc_basename in
-      CC)
+      CC*)
 	# SGI C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	# Archives containing C++ object files must be created using
 	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -3108,7 +3264,7 @@ case $host_os in
       *)
 	if test "$GXX" = yes; then
 	  if test "$with_gnu_ld" = no; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	  else
 	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
 	  fi
@@ -3121,7 +3277,7 @@ case $host_os in
     ;;
   linux*)
     case $cc_basename in
-      KCC)
+      KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	# KCC will only create a shared library if the output file
@@ -3146,17 +3302,41 @@ case $host_os in
 	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
 	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
 	;;
-      icpc)
+      icpc*)
 	# Intel C++
 	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+	  tmp_idyn=
+	  case $host_cpu in
+	    ia64*) tmp_idyn=' -i_dynamic';;
+	  esac
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
 	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 	;;
-      cxx)
+      pgCC*)
+        # Portland Group C++ compiler
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        ;;
+      cxx*)
 	# Compaq C++
 	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
@@ -3187,7 +3367,7 @@ case $host_os in
     ;;
   mvs*)
     case $cc_basename in
-      cxx)
+      cxx*)
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	;;
@@ -3208,9 +3388,25 @@ case $host_os in
     # Workaround some broken pre-1.5 toolchains
     output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
     ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  openbsd*)
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    fi
+    output_verbose_link_cmd='echo'
+    ;;
   osf3*)
     case $cc_basename in
-      KCC)
+      KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	# KCC will only create a shared library if the output file
@@ -3226,14 +3422,14 @@ case $host_os in
 	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
 
 	;;
-      RCC)
+      RCC*)
 	# Rational C++ 2.4.1
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	;;
-      cxx)
+      cxx*)
 	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -3251,7 +3447,7 @@ case $host_os in
       *)
 	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 
 	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -3270,7 +3466,7 @@ case $host_os in
     ;;
   osf4* | osf5*)
     case $cc_basename in
-      KCC)
+      KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	# KCC will only create a shared library if the output file
@@ -3285,17 +3481,17 @@ case $host_os in
 	# the KAI C++ compiler.
 	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
 	;;
-      RCC)
+      RCC*)
 	# Rational C++ 2.4.1
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	;;
-      cxx)
+      cxx*)
 	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
 	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry $objdir/so_locations -o $lib~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
 	  $rm $lib.exp'
 
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -3314,7 +3510,7 @@ case $host_os in
       *)
 	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 
 	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -3335,27 +3531,14 @@ case $host_os in
     # FIXME: insert proper C++ library support
     _LT_AC_TAGVAR(ld_shlibs, $1)=no
     ;;
-  sco*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    case $cc_basename in
-      CC)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
   sunos4*)
     case $cc_basename in
-      CC)
+      CC*)
 	# Sun C++ 4.x
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	;;
-      lcc)
+      lcc*)
 	# Lucid
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
@@ -3368,36 +3551,33 @@ case $host_os in
     ;;
   solaris*)
     case $cc_basename in
-      CC)
+      CC*)
 	# Sun C++ 4.2, 5.x and Centerline C++
+        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
 	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
 
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
 	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
 	case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
+	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
 	  *)
 	    # The C++ compiler is used as linker so we must use $wl
 	    # flag to pass the commands to the underlying system
-	    # linker.
+	    # linker. We must also pass each convience library through
+	    # to the system linker between allextract/defaultextract.
+	    # The C++ compiler will combine linker options so we
+	    # cannot just pass the convience library names through
+	    # without $wl.
 	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
 	    ;;
 	esac
 	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	output_verbose_link_cmd='echo'
 
 	# Archives containing C++ object files must be created using
 	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -3405,7 +3585,7 @@ case $host_os in
 	# in the archive.
 	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
 	;;
-      gcx)
+      gcx*)
 	# Green Hills C++ Compiler
 	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 
@@ -3443,12 +3623,63 @@ case $host_os in
 	;;
     esac
     ;;
-  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
+  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
     _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  sysv5* | sco3.2v5* | sco5v6*)
+    # Note: We can NOT use -z defs as we might desire, because we do not
+    # link with -lc, and that would cause any symbols used from libc to
+    # always be unresolved, which means just about no library would
+    # ever link correctly.  If we're not using GNU ld we use -z text
+    # though, which does catch some bad symbols but isn't as heavy-handed
+    # as -z defs.
+    # For security reasons, it is highly recommended that you always
+    # use absolute paths for naming shared libraries, and exclude the
+    # DT_RUNPATH tag from executables and libraries.  But doing so
+    # requires that you compile everything twice, which is a pain.
+    # So that behaviour is only enabled if SCOABSPATH is set to a
+    # non-empty value in the environment.  Most likely only useful for
+    # creating official distributions of packages.
+    # This is a hack until libtool officially supports absolute path
+    # names for shared libraries.
+    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+    _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
     ;;
   tandem*)
     case $cc_basename in
-      NCC)
+      NCC*)
 	# NonStop-UX NCC 3.20
 	# FIXME: insert proper C++ library support
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
@@ -3481,8 +3712,6 @@ AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
 AC_LIBTOOL_PROG_LD_SHLIBS($1)
 AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
 AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF($1)
 
 AC_LIBTOOL_CONFIG($1)
 
@@ -3500,7 +3729,7 @@ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
 ])# AC_LIBTOOL_LANG_CXX_CONFIG
 
 # AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------
+# ------------------------------------
 # Figure out "hidden" library dependencies from verbose
 # compiler output when linking a shared library.
 # Parse the compiler output and extract the necessary
@@ -3554,7 +3783,7 @@ if AC_TRY_EVAL(ac_compile); then
   # The `*' in the case matches for architectures that use `case' in
   # $output_verbose_cmd can trigger glob expansion during the loop
   # eval without this substitution.
-  output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
+  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
 
   for p in `eval $output_verbose_link_cmd`; do
     case $p in
@@ -3630,13 +3859,37 @@ fi
 
 $rm -f confest.$objext
 
+# PORTME: override above test on systems where it is broken
+ifelse([$1],[CXX],
+[case $host_os in
+interix3*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_AC_TAGVAR(predep_objects,$1)=
+  _LT_AC_TAGVAR(postdep_objects,$1)=
+  _LT_AC_TAGVAR(postdeps,$1)=
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
+    ;;
+  esac
+  ;;
+esac
+])
+
 case " $_LT_AC_TAGVAR(postdeps, $1) " in
 *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
 esac
 ])# AC_LIBTOOL_POSTDEP_PREDEP
 
 # AC_LIBTOOL_LANG_F77_CONFIG
-# ------------------------
+# --------------------------
 # Ensure that the configuration vars for the C compiler are
 # suitably defined.  Those variables are subsequently used by
 # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
@@ -3680,12 +3933,16 @@ lt_simple_link_test_code="      program t\n      end\n"
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_AC_SYS_COMPILER
 
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
 CC=${F77-"f77"}
 compiler=$CC
 _LT_AC_TAGVAR(compiler, $1)=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+_LT_CC_BASENAME([$compiler])
 
 AC_MSG_CHECKING([if libtool supports shared libraries])
 AC_MSG_RESULT([$can_build_shared])
@@ -3695,7 +3952,7 @@ test "$can_build_shared" = "no" && enable_shared=no
 
 # On AIX, shared libraries and static libraries use the same namespace, and
 # are all built from PIC.
-case "$host_os" in
+case $host_os in
 aix3*)
   test "$enable_shared" = yes && enable_static=no
   if test -n "$RANLIB"; then
@@ -3704,7 +3961,9 @@ aix3*)
   fi
   ;;
 aix4* | aix5*)
-  test "$enable_shared" = yes && enable_static=no
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
   ;;
 esac
 AC_MSG_RESULT([$enable_shared])
@@ -3714,8 +3973,6 @@ AC_MSG_CHECKING([whether to build static libraries])
 test "$enable_shared" = yes || enable_static=yes
 AC_MSG_RESULT([$enable_static])
 
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
 _LT_AC_TAGVAR(GCC, $1)="$G77"
 _LT_AC_TAGVAR(LD, $1)="$LD"
 
@@ -3725,8 +3982,6 @@ AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
 AC_LIBTOOL_PROG_LD_SHLIBS($1)
 AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
 AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-
 
 AC_LIBTOOL_CONFIG($1)
 
@@ -3755,20 +4010,27 @@ _LT_AC_TAGVAR(objext, $1)=$objext
 lt_simple_compile_test_code="class foo {}\n"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_AC_SYS_COMPILER
 
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
 CC=${GCJ-"gcj"}
 compiler=$CC
 _LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
 
 # GCJ did not exist at the time GCC didn't implicitly link libc in.
 _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
 
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
 AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
 AC_LIBTOOL_PROG_COMPILER_PIC($1)
 AC_LIBTOOL_PROG_CC_C_O($1)
@@ -3776,8 +4038,6 @@ AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
 AC_LIBTOOL_PROG_LD_SHLIBS($1)
 AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
 AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF($1)
 
 AC_LIBTOOL_CONFIG($1)
 
@@ -3787,7 +4047,7 @@ CC="$lt_save_CC"
 
 
 # AC_LIBTOOL_LANG_RC_CONFIG
-# --------------------------
+# -------------------------
 # Ensure that the configuration vars for the Windows resource compiler are
 # suitably defined.  Those variables are subsequently used by
 # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
@@ -3811,11 +4071,16 @@ lt_simple_link_test_code="$lt_simple_compile_test_code"
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_AC_SYS_COMPILER
 
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
 CC=${RC-"windres"}
 compiler=$CC
 _LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
 _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
 
 AC_LIBTOOL_CONFIG($1)
@@ -3845,7 +4110,7 @@ if test -f "$ltmain"; then
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
     SED SHELL STRIP \
     libname_spec library_names_spec soname_spec extract_expsyms_cmds \
     old_striplib striplib file_magic_cmd finish_cmds finish_eval \
@@ -3951,7 +4216,7 @@ ifelse([$1], [],
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -3962,11 +4227,11 @@ ifelse([$1], [],
 SED=$lt_SED
 
 # Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e s/^X//"
+Xsed="$SED -e 1s/^X//"
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 # The names of the tagged configurations supported by this script.
 available_tags=
@@ -3997,6 +4262,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -4008,6 +4279,9 @@ AR_FLAGS=$lt_AR_FLAGS
 # A C compiler.
 LTCC=$lt_LTCC
 
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
 # A language-specific compiler.
 CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
 
@@ -4073,7 +4347,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
 
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
 # Do we need the lib prefix for modules?
@@ -4347,9 +4621,6 @@ symcode='[[BCDEGRST]]'
 # Regexp to match symbols that can be accessed directly from C.
 sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
 
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
 # Transform an extracted symbol line into a proper C declaration
 lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
 
@@ -4371,15 +4642,31 @@ hpux*) # Its linker distinguishes data from code symbols
   lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
   lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
   ;;
+linux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDGIRSTW]]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
 irix* | nonstopux*)
   symcode='[[BCDEGRST]]'
   ;;
 osf*)
   symcode='[[BCDEGQRST]]'
   ;;
-solaris* | sysv5*)
+solaris*)
   symcode='[[BDRT]]'
   ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
+  ;;
 sysv4)
   symcode='[[DFNSTU]]'
   ;;
@@ -4402,8 +4689,11 @@ esac
 # Try without a prefix undercore, then with it.
 for ac_symprfx in "" "_"; do
 
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
   # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -4559,6 +4849,10 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       # DJGPP does not support shared libraries at all
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
       ;;
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
     sysv4*MP*)
       if test -d /usr/nec; then
 	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
@@ -4567,7 +4861,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
     hpux*)
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	;;
       *)
@@ -4592,18 +4886,28 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       chorus*)
 	case $cc_basename in
-	cxch68)
+	cxch68*)
 	  # Green Hills C++ Compiler
 	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
 	  ;;
 	esac
 	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case $cc_basename in
+           xlc*)
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           ;;
+         esac
+       ;;
       dgux*)
 	case $cc_basename in
-	  ec++)
+	  ec++*)
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    ;;
-	  ghcx)
+	  ghcx*)
 	    # Green Hills C++ Compiler
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
@@ -4611,22 +4915,22 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	    ;;
 	esac
 	;;
-      freebsd* | kfreebsd*-gnu)
+      freebsd* | kfreebsd*-gnu | dragonfly*)
 	# FreeBSD uses GNU C++
 	;;
       hpux9* | hpux10* | hpux11*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
 	    if test "$host_cpu" != ia64; then
 	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	    fi
 	    ;;
-	  aCC)
+	  aCC*)
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    case "$host_cpu" in
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    case $host_cpu in
 	    hppa*64*|ia64*)
 	      # +Z the default
 	      ;;
@@ -4639,9 +4943,13 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	    ;;
 	esac
 	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
       irix5* | irix6* | nonstopux*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    # CC pic flag -KPIC is the default.
@@ -4652,18 +4960,24 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       linux*)
 	case $cc_basename in
-	  KCC)
+	  KCC*)
 	    # KAI C++ Compiler
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	    ;;
-	  icpc)
+	  icpc* | ecpc*)
 	    # Intel C++
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
 	    ;;
-	  cxx)
+	  pgCC*)
+	    # Portland Group C++ compiler.
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
 	    # Compaq C++
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
 	    # Linux and Compaq Tru64 Unix objects are PIC.
@@ -4680,7 +4994,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       mvs*)
 	case $cc_basename in
-	  cxx)
+	  cxx*)
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
 	    ;;
 	  *)
@@ -4691,14 +5005,14 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       osf3* | osf4* | osf5*)
 	case $cc_basename in
-	  KCC)
+	  KCC*)
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
 	    ;;
-	  RCC)
+	  RCC*)
 	    # Rational C++ 2.4.1
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
-	  cxx)
+	  cxx*)
 	    # Digital/Compaq C++
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
@@ -4712,24 +5026,15 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       psos*)
 	;;
-      sco*)
-	case $cc_basename in
-	  CC)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
       solaris*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
 	    ;;
-	  gcx)
+	  gcx*)
 	    # Green Hills C++ Compiler
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
 	    ;;
@@ -4739,12 +5044,12 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       sunos4*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    # Sun C++ 4.x
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	    ;;
-	  lcc)
+	  lcc*)
 	    # Lucid
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
 	    ;;
@@ -4754,7 +5059,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	;;
       tandem*)
 	case $cc_basename in
-	  NCC)
+	  NCC*)
 	    # NonStop-UX NCC 3.20
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    ;;
@@ -4762,7 +5067,14 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	    ;;
 	esac
 	;;
-      unixware*)
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
 	;;
       vxworks*)
 	;;
@@ -4809,6 +5121,11 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
 
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
     msdosdjgpp*)
       # Just because we use GCC doesn't mean we suddenly get shared libraries
       # on systems that don't support them.
@@ -4825,7 +5142,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
     hpux*)
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -4851,6 +5168,16 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+         ;;
+       esac
+       ;;
 
     mingw* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
@@ -4862,7 +5189,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -4886,12 +5213,19 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       ;;
 
     linux*)
-      case $CC in
+      case $cc_basename in
       icc* | ecc*)
 	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
         ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
       ccc*)
         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
         # All Alpha code is PIC.
@@ -4906,15 +5240,15 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
-    sco3.2v5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-      ;;
-
     solaris*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
       ;;
 
     sunos4*)
@@ -4923,7 +5257,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    sysv4 | sysv4.2uw2* | sysv4.3*)
       _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -4936,6 +5270,17 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       fi
       ;;
 
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    unicos*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
     uts4*)
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -4963,7 +5308,7 @@ if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
     [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
 fi
-case "$host_os" in
+case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
     _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
@@ -4972,6 +5317,16 @@ case "$host_os" in
     _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
     ;;
 esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
 ])
 
 
@@ -4996,7 +5351,7 @@ ifelse([$1],[CXX],[
     _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
   ;;
   cygwin* | mingw*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   *)
     _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
@@ -5039,7 +5394,8 @@ ifelse([$1],[CXX],[
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
   extract_expsyms_cmds=
-
+  # Just being paranoid about ensuring that cc_basename is set.
+  _LT_CC_BASENAME([$compiler])
   case $host_os in
   cygwin* | mingw* | pw32*)
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
@@ -5049,6 +5405,10 @@ ifelse([$1],[CXX],[
       with_gnu_ld=no
     fi
     ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
   openbsd*)
     with_gnu_ld=no
     ;;
@@ -5059,6 +5419,27 @@ ifelse([$1],[CXX],[
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
     # See if GNU ld supports shared libraries.
     case $host_os in
     aix3* | aix4* | aix5*)
@@ -5109,10 +5490,10 @@ EOF
       _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
       _LT_AC_TAGVAR(always_export_symbols, $1)=no
       _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
 
       if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
@@ -5121,9 +5502,55 @@ EOF
 	  echo EXPORTS > $output_objdir/$soname.def;
 	  cat $export_symbols >> $output_objdir/$soname.def;
 	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
-	ld_shlibs=no
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    interix3*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    linux*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
@@ -5137,7 +5564,7 @@ EOF
       fi
       ;;
 
-    solaris* | sysv5*)
+    solaris*)
       if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
 	cat <<EOF 1>&2
@@ -5158,6 +5585,33 @@ EOF
       fi
       ;;
 
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) 
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+      esac
+      ;;
+
     sunos4*)
       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       wlarc=
@@ -5165,31 +5619,6 @@ EOF
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
-  linux*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds"
-      supports_anon_versioning=no
-      case `$LD -v 2>/dev/null` in
-        *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-        *\ 2.11.*) ;; # other 2.11 versions
-        *) supports_anon_versioning=yes ;;
-      esac
-      if test $supports_anon_versioning = yes; then
-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
-        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-      else
-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds"
-      fi
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-    ;;
-
     *)
       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
 	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
@@ -5200,16 +5629,11 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       ;;
     esac
 
-    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-      runpath_var=LD_RUN_PATH
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- 	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-      fi
+    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
+      runpath_var=
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
     fi
   else
     # PORTME fill in a description of your system's linker (not GNU ld)
@@ -5221,7 +5645,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
@@ -5255,6 +5679,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
   	    break
   	  fi
 	  done
+	  ;;
 	esac
 
 	exp_sym_flag='-bexport'
@@ -5273,7 +5698,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
       if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
@@ -5292,8 +5717,12 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
   	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
   	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
 	  fi
+	  ;;
 	esac
 	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
@@ -5301,11 +5730,11 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
   	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-  	if test "$aix_use_runtimelinking" = yes; then
+	  if test "$aix_use_runtimelinking" = yes; then
 	    shared_flag='${wl}-G'
 	  else
 	    shared_flag='${wl}-bM:SRE'
-  	fi
+	  fi
 	fi
       fi
 
@@ -5319,12 +5748,12 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
        # Determine the default libpath from the value encoded in an empty executable.
        _LT_AC_SYS_LIBPATH_AIX
        _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
        else
 	if test "$host_cpu" = ia64; then
 	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
 	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an empty executable.
 	 _LT_AC_SYS_LIBPATH_AIX
@@ -5333,13 +5762,11 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
 	  # -berok will link without error, but may produce a broken library.
 	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  _LT_AC_TAGVAR(always_export_symbols, $1)=yes
 	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds it's shared libraries.
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 	fi
       fi
       ;;
@@ -5352,7 +5779,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       _LT_AC_TAGVAR(ld_shlibs, $1)=no
       ;;
 
-    bsdi4*)
+    bsdi[[45]]*)
       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
       ;;
 
@@ -5373,57 +5800,57 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
       # FIXME: Should let the user specify the lib program.
       _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
       _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
       ;;
 
     darwin* | rhapsody*)
-    if test "$GXX" = yes ; then
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      case "$host_os" in
-      rhapsody* | darwin1.[[012]])
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[[012]])
-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
-            ;;
-        esac
-      fi
-	;;
+      case $host_os in
+        rhapsody* | darwin1.[[012]])
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[[012]])
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
       esac
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      fi
-      _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        else
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        fi
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_AC_TAGVAR(hardcode_direct, $1)=no
       _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
     else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
     fi
       ;;
 
@@ -5457,7 +5884,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu)
+    freebsd* | kfreebsd*-gnu | dragonfly*)
       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
       _LT_AC_TAGVAR(hardcode_direct, $1)=yes
@@ -5480,47 +5907,62 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
       ;;
 
-    hpux10* | hpux11*)
+    hpux10*)
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*|ia64*)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
 	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
 	*)
 	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
-	case "$host_cpu" in
-	hppa*64*|ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+	case $host_cpu in
+	hppa*64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
       if test "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	  ;;
-	ia64*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
 	  ;;
 	*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
 	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
 	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 
@@ -5568,6 +6010,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
       if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
 	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
       else
@@ -5613,7 +6056,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
 	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
 	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -5621,21 +6064,15 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
       ;;
 
-    sco3.2v5*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
     solaris*)
       _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
       if test "$GCC" = yes; then
+	wlarc='${wl}'
 	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
 	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
       else
+	wlarc=''
 	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
   	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
@@ -5644,8 +6081,18 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
       case $host_os in
       solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
+      *)
+ 	# The compiler driver will combine linker options so we
+ 	# cannot just pass the convience library names through
+ 	# without $wl, iff we do not link with $LD.
+ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+ 	case $wlarc in
+ 	'')
+ 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
+ 	*)
+ 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	esac ;;
       esac
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
       ;;
@@ -5702,36 +6149,45 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       fi
       ;;
 
-    sysv4.2uw2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
+      runpath_var='LD_RUN_PATH'
 
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[[78]]* | unixware7*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
       if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
-      runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
-    sysv5*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
       ;;
 
     uts4*)
@@ -5749,11 +6205,6 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
 AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
 test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
 #
 # Do we need to explicitly link libc?
 #
@@ -5781,6 +6232,7 @@ x|xyes)
         libobjs=conftest.$ac_objext
         deplibs=
         wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+	pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
         compiler_flags=-v
         linker_flags=-v
         verstring=
@@ -5906,7 +6358,7 @@ lt_ac_count=0
 # Add /usr/xpg4/bin/sed as it is typically found on Solaris
 # along with /bin/sed that truncates output.
 for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && break
+  test ! -f $lt_ac_sed && continue
   cat /dev/null > conftest.in
   lt_ac_count=0
   echo $ECHO_N "0123456789$ECHO_C" >conftest.in
@@ -5931,28 +6383,16 @@ for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
     fi
   done
 done
-SED=$lt_cv_path_SED
 ])
+SED=$lt_cv_path_SED
 AC_MSG_RESULT([$SED])
 ])
 
-#                                                        -*- Autoconf -*-
-# Copyright (C) 2002, 2003  Free Software Foundation, Inc.
-# Generated from amversion.in; do not edit by hand.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
 # AM_AUTOMAKE_VERSION(VERSION)
 # ----------------------------
@@ -5965,26 +6405,15 @@ AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
 # Call AM_AUTOMAKE_VERSION so it can be traced.
 # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.9.2])])
+	 [AM_AUTOMAKE_VERSION([1.9.6])])
 
-# AM_AUX_DIR_EXPAND
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
 # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
 # $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
@@ -6031,26 +6460,16 @@ AC_PREREQ([2.50])dnl
 am_aux_dir=`cd $ac_aux_dir && pwd`
 ])
 
-# AM_CONDITIONAL                                              -*- Autoconf -*-
+# AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc.
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 6
+# serial 7
 
 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
@@ -6074,26 +6493,15 @@ AC_CONFIG_COMMANDS_PRE(
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-# serial 7						-*- Autoconf -*-
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
 # Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
+# serial 8
 
 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
@@ -6102,7 +6510,6 @@ fi])])
 # CC etc. in the Makefile, will ask for an AC_PROG_CC use...
 
 
-
 # _AM_DEPENDENCIES(NAME)
 # ----------------------
 # See how the compiler implements dependency checking.
@@ -6242,27 +6649,16 @@ AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
 AC_SUBST([AMDEPBACKSLASH])
 ])
 
-# Generate code to set up dependency tracking.   -*- Autoconf -*-
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
-#   Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-#serial 2
+#serial 3
 
 # _AM_OUTPUT_DEPENDENCY_COMMANDS
 # ------------------------------
@@ -6321,30 +6717,19 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
      [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
 ])
 
-# Do all the work for Automake.                            -*- Autoconf -*-
+# Do all the work for Automake.                             -*- Autoconf -*-
 
-# This macro actually does too much some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 # Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# serial 12
 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 11
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
 
 # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
 # AM_INIT_AUTOMAKE([OPTIONS])
@@ -6446,51 +6831,27 @@ for _am_header in $config_headers :; do
 done
 echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
 
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
 # AM_PROG_INSTALL_SH
 # ------------------
 # Define $install_sh.
-
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
 AC_DEFUN([AM_PROG_INSTALL_SH],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
 install_sh=${install_sh-"$am_aux_dir/install-sh"}
 AC_SUBST(install_sh)])
 
-#                                                          -*- Autoconf -*-
-# Copyright (C) 2003  Free Software Foundation, Inc.
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 1
+# serial 2
 
 # Check whether the underlying file-system supports filenames
 # with a leading dot.  For instance MS-DOS doesn't.
@@ -6505,26 +6866,15 @@ fi
 rmdir .tst 2>/dev/null
 AC_SUBST([am__leading_dot])])
 
-# Check to see how 'make' treats includes.	-*- Autoconf -*-
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
+# serial 3
 
 # AM_MAKE_INCLUDE()
 # -----------------
@@ -6568,27 +6918,16 @@ AC_MSG_RESULT([$_am_result])
 rm -f confinc confmf
 ])
 
-#  -*- Autoconf -*-
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
+# serial 4
 
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
@@ -6614,27 +6953,16 @@ else
 fi
 ])
 
+# Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
 # AM_PROG_MKDIR_P
 # ---------------
 # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-
-# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
+#
 # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
 # created by `make install' are always world readable, even if the
 # installer happens to have an overly restrictive umask (e.g. 077).
@@ -6688,26 +7016,15 @@ else
 fi
 AC_SUBST([mkdir_p])])
 
-# Helper functions for option handling.                    -*- Autoconf -*-
+# Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
+# serial 3
 
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
@@ -6732,28 +7049,16 @@ AC_DEFUN([_AM_SET_OPTIONS],
 AC_DEFUN([_AM_IF_OPTION],
 [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
 
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
 #
-# Check to make sure that the build environment is sane.
-#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
+# serial 4
 
 # AM_SANITY_CHECK
 # ---------------
@@ -6796,25 +7101,14 @@ Check your system clock])
 fi
 AC_MSG_RESULT(yes)])
 
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
 # AM_PROG_INSTALL_STRIP
-
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
+# ---------------------
 # One issue with vendor `install' (even GNU) is that you can't
 # specify the program used to strip binaries.  This is especially
 # annoying in cross-compiling environments, where the build's strip
@@ -6837,25 +7131,13 @@ AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
 # Check how to create a tarball.                            -*- Autoconf -*-
 
-# Copyright (C) 2004  Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 1
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
+# serial 2
 
 # _AM_PROG_TAR(FORMAT)
 # --------------------
diff --git a/acsite.m4 b/acsite.m4
new file mode 100644
index 0000000000..1976022112
--- /dev/null
+++ b/acsite.m4
@@ -0,0 +1,7 @@
+m4_include([build/config/ax_compiler_vendor.m4])
+m4_include([build/config/ax_cflags_warn_all_ansi.m4])
+m4_include([build/config/ax_cc_maxopt.m4])
+m4_include([build/config/ax_check_compiler_flags.m4])
+m4_include([build/config/ac_gcc_archflag.m4])
+m4_include([build/config/ac_gcc_x86_cpuid.m4])
+
diff --git a/build/config/ltmain.sh b/build/config/ltmain.sh
index eecedf23e4..06823e057a 100644
--- a/build/config/ltmain.sh
+++ b/build/config/ltmain.sh
@@ -43,8 +43,8 @@ EXIT_FAILURE=1
 
 PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=1.5.18
-TIMESTAMP=" (1.1220.2.245 2005/05/16 08:55:27)"
+VERSION=1.5.22
+TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
 
 # See if we are running on zsh, and set the options which allow our
 # commands through without removal of \ escapes.
@@ -88,14 +88,15 @@ rm="rm -f"
 Xsed="${SED}"' -e 1s/^X//'
 sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
 # test EBCDIC or ASCII
-case `echo A|tr A '\301'` in
- A) # EBCDIC based system
-  SP2NL="tr '\100' '\n'"
-  NL2SP="tr '\r\n' '\100\100'"
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  SP2NL='tr \040 \012'
+  NL2SP='tr \015\012 \040\040'
   ;;
- *) # Assume ASCII based system
-  SP2NL="tr '\040' '\012'"
-  NL2SP="tr '\015\012' '\040\040'"
+ *) # EBCDIC based system
+  SP2NL='tr \100 \n'
+  NL2SP='tr \r\n \100\100'
   ;;
 esac
 
@@ -131,14 +132,52 @@ run=
 show="$echo"
 show_help=
 execute_dlfiles=
+duplicate_deps=no
+preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
-quote_scanset='[[~#^*{};<>?'"'"' 	]'
 
 #####################################
 # Shell function definitions:
 # This seems to be the best place for them
 
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+	# Failing that, at least try and use $RANDOM to avoid a race
+	my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+	save_mktempdir_umask=`umask`
+	umask 0077
+	$mkdir "$my_tmpdir"
+	umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || {
+        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+	exit $EXIT_FAILURE
+      }
+    fi
+
+    $echo "X$my_tmpdir" | $Xsed
+}
+
+
 # func_win32_libid arg
 # return the library type of file 'arg'
 #
@@ -157,12 +196,11 @@ func_win32_libid ()
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
       $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
       win32_nmres=`eval $NM -f posix -A $1 | \
-	sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
-      if test "X$win32_nmres" = "Ximport" ; then
-        win32_libid_type="x86 archive import"
-      else
-        win32_libid_type="x86 archive static"
-      fi
+	$SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
     fi
     ;;
   *DLL*)
@@ -192,7 +230,7 @@ func_infer_tag ()
       CC_quoted=
       for arg in $CC; do
 	case $arg in
-	  *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	  arg="\"$arg\""
 	  ;;
 	esac
@@ -213,7 +251,7 @@ func_infer_tag ()
 	    for arg in $CC; do
 	    # Double-quote args containing other shell metacharacters.
 	    case $arg in
-	      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	      arg="\"$arg\""
 	      ;;
 	    esac
@@ -295,9 +333,9 @@ func_extract_archives ()
       $run ${rm}r "$my_xdir"
       $show "$mkdir $my_xdir"
       $run $mkdir "$my_xdir"
-      status=$?
-      if test "$status" -ne 0 && test ! -d "$my_xdir"; then
-	exit $status
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+	exit $exit_status
       fi
       case $host in
       *-darwin*)
@@ -337,7 +375,7 @@ func_extract_archives ()
  	    func_extract_an_archive "$my_xdir" "$my_xabs"
 	  fi # $darwin_arches
 	fi # $run
-      ;;
+	;;
       *)
         func_extract_an_archive "$my_xdir" "$my_xabs"
         ;;
@@ -352,6 +390,8 @@ func_extract_archives ()
 # Darwin sucks
 eval std_shrext=\"$shrext_cmds\"
 
+disable_libs=no
+
 # Parse our command line options once, thoroughly.
 while test "$#" -gt 0
 do
@@ -468,7 +508,11 @@ do
     preserve_args="$preserve_args $arg"
     ;;
 
-  --tag) prevopt="--tag" prev=tag ;;
+  --tag)
+    prevopt="--tag"
+    prev=tag
+    preserve_args="$preserve_args --tag"
+    ;;
   --tag=*)
     set tag "$optarg" ${1+"$@"}
     shift
@@ -500,6 +544,18 @@ if test -n "$prevopt"; then
   exit $EXIT_FAILURE
 fi
 
+case $disable_libs in
+no) 
+  ;;
+shared)
+  build_libtool_libs=no
+  build_old_libs=yes
+  ;;
+static)
+  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+  ;;
+esac
+
 # If this variable is set in any of the actions, the command in it
 # will be execed at the end.  This prevents here-documents from being
 # left over by shells.
@@ -576,7 +632,7 @@ if test -z "$show_help"; then
 
     for arg
     do
-      case "$arg_mode" in
+      case $arg_mode in
       arg  )
 	# do not "continue".  Instead, add this to base_compile
 	lastarg="$arg"
@@ -627,7 +683,7 @@ if test -z "$show_help"; then
 	    # Many Bourne shells cannot handle close brackets correctly
 	    # in scan sets, so we specify it separately.
 	    case $arg in
-	      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	      arg="\"$arg\""
 	      ;;
 	    esac
@@ -662,7 +718,7 @@ if test -z "$show_help"; then
       # in scan sets (worked around with variable expansion),
       # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
       # at all, so we specify them separately.
-      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	lastarg="\"$lastarg\""
 	;;
       esac
@@ -737,13 +793,12 @@ if test -z "$show_help"; then
 
     qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
     case $qlibobj in
-      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	qlibobj="\"$qlibobj\"" ;;
     esac
-    if test "X$libobj" != "X$qlibobj"; then
-	$echo "$modename: libobj name \`$libobj' may not contain shell special characters."
-	exit $EXIT_FAILURE
-    fi
+    test "X$libobj" != "X$qlibobj" \
+	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
+	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
     objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
     xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
     if test "X$xdir" = "X$obj"; then
@@ -824,7 +879,7 @@ compiler."
     fi
     qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
     case $qsrcfile in
-      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
       qsrcfile="\"$qsrcfile\"" ;;
     esac
 
@@ -857,9 +912,9 @@ EOF
       if test ! -d "${xdir}$objdir"; then
 	$show "$mkdir ${xdir}$objdir"
 	$run $mkdir ${xdir}$objdir
-	status=$?
-	if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
-	  exit $status
+	exit_status=$?
+	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+	  exit $exit_status
 	fi
       fi
 
@@ -1062,6 +1117,7 @@ EOF
     no_install=no
     objs=
     non_pic_objects=
+    notinst_path= # paths that contain not-installed libtool libraries
     precious_files_regex=
     prefer_static_libs=no
     preload=no
@@ -1090,14 +1146,15 @@ EOF
 	  if test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
+	  prefer_static_libs=yes
 	else
 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
+	  prefer_static_libs=built
 	fi
 	build_libtool_libs=no
 	build_old_libs=yes
-	prefer_static_libs=yes
 	break
 	;;
       esac
@@ -1111,7 +1168,7 @@ EOF
       arg="$1"
       shift
       case $arg in
-      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
 	;;
       *) qarg=$arg ;;
@@ -1272,6 +1329,11 @@ EOF
 		  if test -z "$pic_object" || test "$pic_object" = none ; then
 		    arg="$non_pic_object"
 		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  non_pic_objects="$non_pic_objects $non_pic_object"
 		fi
 	      else
 		# Only an error if not doing a dry-run.
@@ -1355,8 +1417,8 @@ EOF
 	  prev=
 	  continue
 	  ;;
-        darwin_framework)
-	  compiler_flags="$compiler_flags $arg"
+	darwin_framework|darwin_framework_skip)
+	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
 	  compile_command="$compile_command $arg"
 	  finalize_command="$finalize_command $arg"
 	  prev=
@@ -1420,13 +1482,17 @@ EOF
 	continue
 	;;
 
-      -framework)
-        prev=darwin_framework
-        compiler_flags="$compiler_flags $arg"
+      -framework|-arch|-isysroot)
+	case " $CC " in
+	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
+		prev=darwin_framework_skip ;;
+	  *) compiler_flags="$compiler_flags $arg"
+	     prev=darwin_framework ;;
+	esac
 	compile_command="$compile_command $arg"
 	finalize_command="$finalize_command $arg"
-        continue
-        ;;
+	continue
+	;;
 
       -inst-prefix-dir)
 	prev=inst_prefix
@@ -1454,7 +1520,8 @@ EOF
 	  absdir=`cd "$dir" && pwd`
 	  if test -z "$absdir"; then
 	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    exit $EXIT_FAILURE
+	    absdir="$dir"
+	    notinst_path="$notinst_path $dir"
 	  fi
 	  dir="$absdir"
 	  ;;
@@ -1468,10 +1535,15 @@ EOF
 	esac
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
 	  *) dllsearchpath="$dllsearchpath:$dir";;
 	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
 	  ;;
 	esac
 	continue
@@ -1480,11 +1552,11 @@ EOF
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-pw32* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
-	  *-*-mingw* | *-*-os2*)
+	  *-*-os2*)
 	    # These systems don't actually have a C library (as such)
 	    test "X$arg" = "X-lc" && continue
 	    ;;
@@ -1496,6 +1568,15 @@ EOF
 	    # Rhapsody C and math libraries are in the System framework
 	    deplibs="$deplibs -framework System"
 	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
 	  esac
 	elif test "X$arg" = "X-lc_r"; then
 	 case $host in
@@ -1537,21 +1618,24 @@ EOF
       # +DA*, +DD* enable 64-bit mode on the HP compiler
       # -q* pass through compiler args for the IBM compiler
       # -m* pass through architecture-specific compiler args for GCC
-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*)
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -pg pass through profiling flag for GCC
+      # @file GCC response files
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
+      -t[45]*|-txscale*|@*)
 
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
 	case $arg in
-	*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	  arg="\"$arg\""
 	  ;;
 	esac
         compile_command="$compile_command $arg"
         finalize_command="$finalize_command $arg"
-        if test "$with_gcc" = "yes" ; then
-          compiler_flags="$compiler_flags $arg"
-        fi
+        compiler_flags="$compiler_flags $arg"
         continue
         ;;
 
@@ -1659,7 +1743,7 @@ EOF
 	for flag in $args; do
 	  IFS="$save_ifs"
 	  case $flag in
-	    *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	    flag="\"$flag\""
 	    ;;
 	  esac
@@ -1677,7 +1761,7 @@ EOF
 	for flag in $args; do
 	  IFS="$save_ifs"
 	  case $flag in
-	    *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	    flag="\"$flag\""
 	    ;;
 	  esac
@@ -1710,7 +1794,7 @@ EOF
 	# to be aesthetically quoted because they are evaled later.
 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
 	case $arg in
-	*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	  arg="\"$arg\""
 	  ;;
 	esac
@@ -1789,6 +1873,11 @@ EOF
 	    if test -z "$pic_object" || test "$pic_object" = none ; then
 	      arg="$non_pic_object"
 	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    non_pic_objects="$non_pic_objects $non_pic_object"
 	  fi
 	else
 	  # Only an error if not doing a dry-run.
@@ -1844,7 +1933,7 @@ EOF
 	# to be aesthetically quoted because they are evaled later.
 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
 	case $arg in
-	*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	  arg="\"$arg\""
 	  ;;
 	esac
@@ -1894,9 +1983,9 @@ EOF
     if test ! -d "$output_objdir"; then
       $show "$mkdir $output_objdir"
       $run $mkdir $output_objdir
-      status=$?
-      if test "$status" -ne 0 && test ! -d "$output_objdir"; then
-	exit $status
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
+	exit $exit_status
       fi
     fi
 
@@ -1959,7 +2048,6 @@ EOF
     newlib_search_path=
     need_relink=no # whether we're linking any uninstalled libtool libraries
     notinst_deplibs= # not-installed libtool libraries
-    notinst_path= # paths that contain not-installed libtool libraries
     case $linkmode in
     lib)
 	passes="conv link"
@@ -2195,7 +2283,7 @@ EOF
 	esac # case $deplib
 	if test "$found" = yes || test -f "$lib"; then :
 	else
-	  $echo "$modename: cannot find the library \`$lib'" 1>&2
+	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
 	  exit $EXIT_FAILURE
 	fi
 
@@ -2409,7 +2497,7 @@ EOF
 	      case "$temp_rpath " in
 	      *" $dir "*) ;;
 	      *" $absdir "*) ;;
-	      *) temp_rpath="$temp_rpath $dir" ;;
+	      *) temp_rpath="$temp_rpath $absdir" ;;
 	      esac
 	    fi
 
@@ -2446,8 +2534,12 @@ EOF
 	fi
 
 	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes ; then
+	  use_static_libs=no
+	fi
 	if test -n "$library_names" &&
-	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
 	  if test "$installed" = no; then
 	    notinst_deplibs="$notinst_deplibs $lib"
 	    need_relink=yes
@@ -2560,11 +2652,15 @@ EOF
 	      if test "$hardcode_direct" = no; then
 		add="$dir/$linklib"
 		case $host in
-		  *-*-sco3.2v5* ) add_dir="-L$dir" ;;
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
 		  *-*-darwin* )
 		    # if the lib is a module then we can not link against
 		    # it, someone is ignoring the new warnings I added
-		    if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
+		    if /usr/bin/file -L $add 2> /dev/null |
+                      $EGREP ": [^:]* bundle" >/dev/null ; then
 		      $echo "** Warning, lib $linklib is a module, not a shared library"
 		      if test -z "$old_library" ; then
 		        $echo
@@ -2595,7 +2691,7 @@ EOF
 		add_dir="-L$dir"
 		# Try looking first in the location we're being installed to.
 		if test -n "$inst_prefix_dir"; then
-		  case "$libdir" in
+		  case $libdir in
 		    [\\/]*)
 		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
 		      ;;
@@ -2668,7 +2764,7 @@ EOF
 	      add_dir="-L$libdir"
 	      # Try looking first in the location we're being installed to.
 	      if test -n "$inst_prefix_dir"; then
-		case "$libdir" in
+		case $libdir in
 		  [\\/]*)
 		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
 		    ;;
@@ -2729,8 +2825,6 @@ EOF
 	      fi
 	    fi
 	  else
-	    convenience="$convenience $dir/$old_library"
-	    old_convenience="$old_convenience $dir/$old_library"
 	    deplibs="$dir/$old_library $deplibs"
 	    link_static=yes
 	  fi
@@ -3317,9 +3411,9 @@ EOF
 
       # Eliminate all temporary directories.
       for path in $notinst_path; do
-	lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
-	deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
-	dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
+	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
       done
 
       if test -n "$xrpath"; then
@@ -3372,7 +3466,12 @@ EOF
 	    ;;
 	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
 	    ;;
  	  *)
 	    # Add libc to deplibs on all other systems if necessary.
@@ -3416,11 +3515,11 @@ EOF
 	  int main() { return 0; }
 EOF
 	  $rm conftest
-	  $LTCC -o conftest conftest.c $deplibs
+	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
 	  if test "$?" -eq 0 ; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
+	      name=`expr $i : '-l\(.*\)'`
 	      # If $name is empty we are operating on a -L argument.
               if test "$name" != "" && test "$name" -ne "0"; then
 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3457,11 +3556,11 @@ EOF
 	    # Error occurred in the first compile.  Let's try to salvage
 	    # the situation: Compile a separate program for each library.
 	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
+	      name=`expr $i : '-l\(.*\)'`
 	      # If $name is empty we are operating on a -L argument.
               if test "$name" != "" && test "$name" != "0"; then
 		$rm conftest
-		$LTCC -o conftest conftest.c $i
+		$LTCC $LTCFLAGS -o conftest conftest.c $i
 		# Did it work?
 		if test "$?" -eq 0 ; then
 		  ldd_output=`ldd conftest`
@@ -3509,7 +3608,7 @@ EOF
 	  set dummy $deplibs_check_method
 	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    name=`expr $a_deplib : '-l\(.*\)'`
 	    # If $name is empty we are operating on a -L argument.
             if test "$name" != "" && test  "$name" != "0"; then
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3578,7 +3677,7 @@ EOF
 	  set dummy $deplibs_check_method
 	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    name=`expr $a_deplib : '-l\(.*\)'`
 	    # If $name is empty we are operating on a -L argument.
 	    if test -n "$name" && test "$name" != "0"; then
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3708,6 +3807,35 @@ EOF
 	deplibs=$newdeplibs
       fi
 
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+
       # All the library-specific variables (install_libdir is set above).
       library_names=
       old_library=
@@ -3791,6 +3919,7 @@ EOF
 	fi
 
 	lib="$output_objdir/$realname"
+	linknames=
 	for link
 	do
 	  linknames="$linknames $link"
@@ -3819,6 +3948,9 @@ EOF
 	        # The command line is too long to execute in one step.
 	        $show "using reloadable object file for export list..."
 	        skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
 	      fi
 	    done
 	    IFS="$save_ifs"
@@ -3888,7 +4020,8 @@ EOF
 	  fi
 	fi
 
-	if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
+	if test "X$skipped_export" != "X:" &&
+	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
 	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  :
 	else
@@ -3923,7 +4056,7 @@ EOF
 	  do
 	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
 	    if test "X$objlist" = X ||
-	       { len=`expr "X$test_cmds" : ".*"` &&
+	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
 		 test "$len" -le "$max_cmd_len"; }; then
 	      objlist="$objlist $obj"
 	    else
@@ -4013,13 +4146,30 @@ EOF
 	  IFS="$save_ifs"
 	  eval cmd=\"$cmd\"
 	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
+	  $run eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test "$mode" = relink; then
+	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	    fi
+
+	    exit $lt_exit
+	  }
 	done
 	IFS="$save_ifs"
 
 	# Restore the uninstalled library and exit
 	if test "$mode" = relink; then
 	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      $show "${rm}r $gentop"
+	      $run ${rm}r "$gentop"
+	    fi
+	  fi
+
 	  exit $EXIT_SUCCESS
 	fi
 
@@ -4201,6 +4351,35 @@ EOF
         ;;
       esac
 
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
+
+
       compile_command="$compile_command $compile_deplibs"
       finalize_command="$finalize_command $finalize_deplibs"
 
@@ -4245,10 +4424,15 @@ EOF
 	fi
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
 	  *) dllsearchpath="$dllsearchpath:$libdir";;
 	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
 	  ;;
 	esac
       done
@@ -4364,11 +4548,23 @@ extern \"C\" {
 	    if test -z "$export_symbols"; then
 	      export_symbols="$output_objdir/$outputname.exp"
 	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
 	    else
-	      $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
 	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      $run eval 'mv "$nlist"T "$nlist"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
 	    fi
 	  fi
 
@@ -4485,16 +4681,29 @@ static const void *lt_preloaded_setup() {
 	  esac
 
 	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
 
 	  # Clean up the generated files.
 	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
 	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
 
 	  # Transform the symbol file into the correct name.
-	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+          case $host in
+          *cygwin* | *mingw* )
+            if test -f "$output_objdir/${outputname}.def" ; then
+              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+            else
+              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+             fi
+            ;;
+          * )
+            compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+            finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+            ;;
+          esac
 	  ;;
 	*)
 	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
@@ -4519,7 +4728,7 @@ static const void *lt_preloaded_setup() {
 	# We have no uninstalled library dependencies, so finalize right now.
 	$show "$link_command"
 	$run eval "$link_command"
-	status=$?
+	exit_status=$?
 
 	# Delete the generated files.
 	if test -n "$dlsyms"; then
@@ -4527,7 +4736,7 @@ static const void *lt_preloaded_setup() {
 	  $run $rm "$output_objdir/${outputname}S.${objext}"
 	fi
 
-	exit $status
+	exit $exit_status
       fi
 
       if test -n "$shlibpath_var"; then
@@ -4667,10 +4876,12 @@ static const void *lt_preloaded_setup() {
 	esac
 	case $host in
 	  *cygwin* | *mingw* )
-	    cwrappersource=`$echo ${objdir}/lt-${outputname}.c`
-	    cwrapper=`$echo ${output}.exe`
-	    $rm $cwrappersource $cwrapper
-	    trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+            output_name=`basename $output`
+            output_path=`dirname $output`
+            cwrappersource="$output_path/$objdir/lt-$output_name.c"
+            cwrapper="$output_path/$output_name.exe"
+            $rm $cwrappersource $cwrapper
+            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
 
 	    cat > $cwrappersource <<EOF
 
@@ -4695,6 +4906,9 @@ EOF
 #include <malloc.h>
 #include <stdarg.h>
 #include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <sys/stat.h>
 
 #if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
@@ -4705,15 +4919,19 @@ EOF
 #endif
 
 #ifndef DIR_SEPARATOR
-#define DIR_SEPARATOR '/'
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
 #endif
 
 #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
   defined (__OS2__)
-#define HAVE_DOS_BASED_FILE_SYSTEM
-#ifndef DIR_SEPARATOR_2
-#define DIR_SEPARATOR_2 '\\'
-#endif
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
 #endif
 
 #ifndef DIR_SEPARATOR_2
@@ -4723,17 +4941,32 @@ EOF
         (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
 #endif /* DIR_SEPARATOR_2 */
 
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
 #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
 #define XFREE(stale) do { \
   if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 
+/* -DDEBUG is fairly common in CFLAGS.  */
+#undef DEBUG
+#if defined DEBUGWRAPPER
+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+#else
+# define DEBUG(format, ...)
+#endif
+
 const char *program_name = NULL;
 
 void * xmalloc (size_t num);
 char * xstrdup (const char *string);
-char * basename (const char *name);
-char * fnqualify(const char *path);
+const char * base_name (const char *name);
+char * find_executable(const char *wrapper);
+int    check_executable(const char *path);
 char * strendzap(char *str, const char *pat);
 void lt_fatal (const char *message, ...);
 
@@ -4743,29 +4976,51 @@ main (int argc, char *argv[])
   char **newargz;
   int i;
 
-  program_name = (char *) xstrdup ((char *) basename (argv[0]));
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  DEBUG("(main) argv[0]      : %s\n",argv[0]);
+  DEBUG("(main) program_name : %s\n",program_name);
   newargz = XMALLOC(char *, argc+2);
 EOF
 
-	    cat >> $cwrappersource <<EOF
-  newargz[0] = "$SHELL";
+            cat >> $cwrappersource <<EOF
+  newargz[0] = (char *) xstrdup("$SHELL");
 EOF
 
-	    cat >> $cwrappersource <<"EOF"
-  newargz[1] = fnqualify(argv[0]);
+            cat >> $cwrappersource <<"EOF"
+  newargz[1] = find_executable(argv[0]);
+  if (newargz[1] == NULL)
+    lt_fatal("Couldn't find %s", argv[0]);
+  DEBUG("(main) found exe at : %s\n",newargz[1]);
   /* we know the script has the same name, without the .exe */
   /* so make sure newargz[1] doesn't end in .exe */
   strendzap(newargz[1],".exe");
   for (i = 1; i < argc; i++)
     newargz[i+1] = xstrdup(argv[i]);
   newargz[argc+1] = NULL;
+
+  for (i=0; i<argc+1; i++)
+  {
+    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
+    ;
+  }
+
 EOF
 
-	    cat >> $cwrappersource <<EOF
+            case $host_os in
+              mingw*)
+                cat >> $cwrappersource <<EOF
+  execv("$SHELL",(char const **)newargz);
+EOF
+              ;;
+              *)
+                cat >> $cwrappersource <<EOF
   execv("$SHELL",newargz);
 EOF
+              ;;
+            esac
 
-	    cat >> $cwrappersource <<"EOF"
+            cat >> $cwrappersource <<"EOF"
+  return 127;
 }
 
 void *
@@ -4785,48 +5040,148 @@ xstrdup (const char *string)
 ;
 }
 
-char *
-basename (const char *name)
+const char *
+base_name (const char *name)
 {
   const char *base;
 
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
   /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha (name[0]) && name[1] == ':')
+  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
     name += 2;
 #endif
 
   for (base = name; *name; name++)
     if (IS_DIR_SEPARATOR (*name))
       base = name + 1;
-  return (char *) base;
+  return base;
 }
 
-char *
-fnqualify(const char *path)
+int
+check_executable(const char * path)
 {
-  size_t size;
-  char *p;
-  char tmp[LT_PATHMAX + 1];
+  struct stat st;
 
-  assert(path != NULL);
+  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+  if ((!path) || (!*path))
+    return 0;
 
-  /* Is it qualified already? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha (path[0]) && path[1] == ':')
-    return xstrdup (path);
+  if ((stat (path, &st) >= 0) &&
+      (
+        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+#if defined (S_IXOTH)
+       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
 #endif
-  if (IS_DIR_SEPARATOR (path[0]))
-    return xstrdup (path);
+#if defined (S_IXGRP)
+       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+#endif
+       ((st.st_mode & S_IXUSR) == S_IXUSR))
+      )
+    return 1;
+  else
+    return 0;
+}
 
-  /* prepend the current directory */
-  /* doesn't handle '~' */
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise */
+char *
+find_executable (const char* wrapper)
+{
+  int has_slash = 0;
+  const char* p;
+  const char* p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char* concat_name;
+
+  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+  {
+    concat_name = xstrdup (wrapper);
+    if (check_executable(concat_name))
+      return concat_name;
+    XFREE(concat_name);
+  }
+  else
+  {
+#endif
+    if (IS_DIR_SEPARATOR (wrapper[0]))
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable(concat_name))
+        return concat_name;
+      XFREE(concat_name);
+    }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+    {
+      has_slash = 1;
+      break;
+    }
+  if (!has_slash)
+  {
+    /* no slashes; search PATH */
+    const char* path = getenv ("PATH");
+    if (path != NULL)
+    {
+      for (p = path; *p; p = p_next)
+      {
+        const char* q;
+        size_t p_len;
+        for (q = p; *q; q++)
+          if (IS_PATH_SEPARATOR(*q))
+            break;
+        p_len = q - p;
+        p_next = (*q == '\0' ? q : q + 1);
+        if (p_len == 0)
+        {
+          /* empty path: current directory */
+          if (getcwd (tmp, LT_PATHMAX) == NULL)
+            lt_fatal ("getcwd failed");
+          tmp_len = strlen(tmp);
+          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, tmp, tmp_len);
+          concat_name[tmp_len] = '/';
+          strcpy (concat_name + tmp_len + 1, wrapper);
+        }
+        else
+        {
+          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, p, p_len);
+          concat_name[p_len] = '/';
+          strcpy (concat_name + p_len + 1, wrapper);
+        }
+        if (check_executable(concat_name))
+          return concat_name;
+        XFREE(concat_name);
+      }
+    }
+    /* not found in PATH; assume curdir */
+  }
+  /* Relative path | not found in path: prepend cwd */
   if (getcwd (tmp, LT_PATHMAX) == NULL)
     lt_fatal ("getcwd failed");
-  size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
-  p = XMALLOC(char, size);
-  sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
-  return p;
+  tmp_len = strlen(tmp);
+  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable(concat_name))
+    return concat_name;
+  XFREE(concat_name);
+  return NULL;
 }
 
 char *
@@ -4870,16 +5225,16 @@ lt_fatal (const char *message, ...)
   va_end (ap);
 }
 EOF
-	  # we should really use a build-platform specific compiler
-	  # here, but OTOH, the wrappers (shell script and this C one)
-	  # are only useful if you want to execute the "real" binary.
-	  # Since the "real" binary is built for $host, then this
-	  # wrapper might as well be built for $host, too.
-	  $run $LTCC -s -o $cwrapper $cwrappersource
-	  ;;
-	esac
-	$rm $output
-	trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+          # we should really use a build-platform specific compiler
+          # here, but OTOH, the wrappers (shell script and this C one)
+          # are only useful if you want to execute the "real" binary.
+          # Since the "real" binary is built for $host, then this
+          # wrapper might as well be built for $host, too.
+          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+          ;;
+        esac
+        $rm $output
+        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
 
 	$echo > $output "\
 #! $SHELL
@@ -5029,13 +5384,13 @@ else
 	# Backslashes separate directories on plain windows
 	*-*-mingw | *-*-os2*)
 	  $echo >> $output "\
-      exec \$progdir\\\\\$program \${1+\"\$@\"}
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
 "
 	  ;;
 
 	*)
 	  $echo >> $output "\
-      exec \$progdir/\$program \${1+\"\$@\"}
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
 "
 	  ;;
 	esac
@@ -5045,7 +5400,7 @@ else
     fi
   else
     # The program doesn't exist.
-    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$echo \"This script is just a wrapper for \$program.\" 1>&2
     $echo \"See the $PACKAGE documentation for more information.\" 1>&2
     exit $EXIT_FAILURE
@@ -5109,9 +5464,9 @@ fi\
 	    $run ${rm}r "$gentop"
 	    $show "$mkdir $gentop"
 	    $run $mkdir "$gentop"
-	    status=$?
-	    if test "$status" -ne 0 && test ! -d "$gentop"; then
-	      exit $status
+	    exit_status=$?
+	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
+	      exit $exit_status
 	    fi
 	  fi
 
@@ -5168,7 +5523,7 @@ fi\
 	    oldobjs="$objlist $obj"
 	    objlist="$objlist $obj"
 	    eval test_cmds=\"$old_archive_cmds\"
-	    if len=`expr "X$test_cmds" : ".*"` &&
+	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
 	       test "$len" -le "$max_cmd_len"; then
 	      :
 	    else
@@ -5365,11 +5720,11 @@ relink_command=\"$relink_command\""
     # install_prog (especially on Windows NT).
     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        # Allow the use of GNU shtool's install command.
-       $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+       $echo "X$nonopt" | grep shtool > /dev/null; then
       # Aesthetically quote it.
       arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
       case $arg in
-      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	arg="\"$arg\""
 	;;
       esac
@@ -5378,14 +5733,14 @@ relink_command=\"$relink_command\""
       shift
     else
       install_prog=
-      arg="$nonopt"
+      arg=$nonopt
     fi
 
     # The real first argument should be the name of the installation program.
     # Aesthetically quote it.
     arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
     case $arg in
-    *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
       arg="\"$arg\""
       ;;
     esac
@@ -5403,28 +5758,31 @@ relink_command=\"$relink_command\""
     do
       if test -n "$dest"; then
 	files="$files $dest"
-	dest="$arg"
+	dest=$arg
 	continue
       fi
 
       case $arg in
       -d) isdir=yes ;;
-      -f) prev="-f" ;;
-      -g) prev="-g" ;;
-      -m) prev="-m" ;;
-      -o) prev="-o" ;;
+      -f) 
+      	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
+	;;
+      -g | -m | -o) prev=$arg ;;
       -s)
 	stripme=" -s"
 	continue
 	;;
-      -*) ;;
-
+      -*)
+	;;
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then
 	  prev=
 	else
-	  dest="$arg"
+	  dest=$arg
 	  continue
 	fi
 	;;
@@ -5433,7 +5791,7 @@ relink_command=\"$relink_command\""
       # Aesthetically quote the argument.
       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
       case $arg in
-      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	arg="\"$arg\""
 	;;
       esac
@@ -5602,11 +5960,14 @@ relink_command=\"$relink_command\""
 
 	  if test "$#" -gt 0; then
 	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
 	    for linkname
 	    do
 	      if test "$linkname" != "$realname"; then
-		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
 	      fi
 	    done
 	  fi
@@ -5619,7 +5980,16 @@ relink_command=\"$relink_command\""
 	    IFS="$save_ifs"
 	    eval cmd=\"$cmd\"
 	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
+	    $run eval "$cmd" || {
+	      lt_exit=$?
+
+	      # Restore the uninstalled library and exit
+	      if test "$mode" = relink; then
+		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	      fi
+
+	      exit $lt_exit
+	    }
 	  done
 	  IFS="$save_ifs"
 	fi
@@ -5713,17 +6083,15 @@ relink_command=\"$relink_command\""
 	  notinst_deplibs=
 	  relink_command=
 
-	  # To insure that "foo" is sourced, and not "foo.exe",
-	  # finese the cygwin/MSYS system by explicitly sourcing "foo."
-	  # which disallows the automatic-append-.exe behavior.
-	  case $build in
-	  *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
-	  *) wrapperdot=${wrapper} ;;
-	  esac
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
 	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . ${wrapperdot} ;;
-	  *) . ./${wrapperdot} ;;
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
 	  esac
 
 	  # Check the variables that should have been set.
@@ -5751,34 +6119,21 @@ relink_command=\"$relink_command\""
 	  done
 
 	  relink_command=
-	  # To insure that "foo" is sourced, and not "foo.exe",
-	  # finese the cygwin/MSYS system by explicitly sourcing "foo."
-	  # which disallows the automatic-append-.exe behavior.
-	  case $build in
-	  *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
-	  *) wrapperdot=${wrapper} ;;
-	  esac
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
 	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . ${wrapperdot} ;;
-	  *) . ./${wrapperdot} ;;
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
 	  esac
 
 	  outputname=
 	  if test "$fast_install" = no && test -n "$relink_command"; then
 	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir="/tmp"
-	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
-	      tmpdir="$tmpdir/libtool-$$"
-	      save_umask=`umask`
-	      umask 0077
-	      if $mkdir "$tmpdir"; then
-	        umask $save_umask
-	      else
-	        umask $save_umask
-		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
-		continue
-	      fi
+	      tmpdir=`func_mktempdir`
 	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
 	      outputname="$tmpdir/$file"
 	      # Replace the output file specification.
@@ -5802,7 +6157,7 @@ relink_command=\"$relink_command\""
 	fi
 
 	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyways
+	# one anyway 
 	case $install_prog,$host in
 	*/usr/bin/install*,*cygwin*)
 	  case $file:$destfile in
@@ -5902,7 +6257,7 @@ relink_command=\"$relink_command\""
     # Exit here if they wanted silent mode.
     test "$show" = : && exit $EXIT_SUCCESS
 
-    $echo "----------------------------------------------------------------------"
+    $echo "X----------------------------------------------------------------------" | $Xsed
     $echo "Libraries have been installed in:"
     for libdir in $libdirs; do
       $echo "   $libdir"
@@ -5935,7 +6290,7 @@ relink_command=\"$relink_command\""
     $echo
     $echo "See any operating system documentation about shared libraries for"
     $echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    $echo "----------------------------------------------------------------------"
+    $echo "X----------------------------------------------------------------------" | $Xsed
     exit $EXIT_SUCCESS
     ;;
 
@@ -6152,9 +6507,17 @@ relink_command=\"$relink_command\""
 	    rmfiles="$rmfiles $objdir/$n"
 	  done
 	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-	  test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
 
-	  if test "$mode" = uninstall; then
+	  case "$mode" in
+	  clean)
+	    case "  $library_names " in
+	    # "  " in the beginning catches empty $dlname
+	    *" $dlname "*) ;;
+	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
+	    esac
+	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    ;;
+	  uninstall)
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.
 	      cmds=$postuninstall_cmds
@@ -6187,7 +6550,8 @@ relink_command=\"$relink_command\""
 	      IFS="$save_ifs"
 	    fi
 	    # FIXME: should reinstall the best remaining shared library.
-	  fi
+	    ;;
+	  esac
 	fi
 	;;
 
@@ -6486,12 +6850,11 @@ exit $?
 # configuration.  But we'll never go from static-only to shared-only.
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
+disable_libs=shared
 # ### END LIBTOOL TAG CONFIG: disable-shared
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
+disable_libs=static
 # ### END LIBTOOL TAG CONFIG: disable-static
 
 # Local Variables:
diff --git a/configure b/configure
index a9237a4f53..b8ab7957be 100755
--- a/configure
+++ b/configure
@@ -280,15 +280,15 @@ fi
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 if test -z "$ECHO"; then
 if test "X${echo_test_string+set}" != Xset; then
 # find a string as large as possible, as long as the shell can cope with it
   for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
     # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
+    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+       echo_test_string=`eval $cmd` &&
        (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
     then
       break
@@ -466,7 +466,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBOBJS CRASHPROT_TRUE CRASHPROT_FALSE ISLINUX_TRUE ISLINUX_FALSE ISMAC_TRUE ISMAC_FALSE IS64BITLINUX_TRUE IS64BITLINUX_FALSE LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL PRTDIAG WANT_DEBUG_TRUE WANT_DEBUG_FALSE new_AM_CFLAGS new_AM_LDFLAGS SOLINK DYNAMIC_LIB_EXTEN LIBOBJS CRASHPROT_TRUE CRASHPROT_FALSE ISLINUX_TRUE ISLINUX_FALSE ISMAC_TRUE ISMAC_FALSE IS64BITLINUX_TRUE IS64BITLINUX_FALSE LTLIBOBJS'
 ac_subst_files=''
 
 # Initialize some variables set by options.
@@ -1037,6 +1037,12 @@ Optional Features:
   --enable-fast-install[=PKGS]
                           optimize for fast installation [default=yes]
   --disable-libtool-lock  avoid locking (might break parallel builds)
+  --enable-optimization   Set if you want us to add max optimising compiler
+                          flags
+  --enable-portable-binary
+                          disable compiler optimizations that would produce
+                          unportable binaries
+  --enable-debug          build with debug information
   --enable-crash-protection         Compile with CRASH Protection
 
 Optional Packages:
@@ -1047,6 +1053,8 @@ Optional Packages:
                           both]
   --with-tags[=TAGS]
                           include additional configurations [automatic]
+  --with-gcc-arch=<arch>  use architecture <arch> for gcc -march/-mtune,
+                          instead of guessing
 
 Some influential environment variables:
   CC          C compiler command
@@ -1954,6 +1962,13 @@ am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
 
 
 
+#Set default language
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
 # Checks for programs.
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -3358,7 +3373,7 @@ lt_ac_count=0
 # Add /usr/xpg4/bin/sed as it is typically found on Solaris
 # along with /bin/sed that truncates output.
 for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && break
+  test ! -f $lt_ac_sed && continue
   cat /dev/null > conftest.in
   lt_ac_count=0
   echo $ECHO_N "0123456789$ECHO_C" >conftest.in
@@ -3383,10 +3398,10 @@ for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
     fi
   done
 done
-SED=$lt_cv_path_SED
 
 fi
 
+SED=$lt_cv_path_SED
 echo "$as_me:$LINENO: result: $SED" >&5
 echo "${ECHO_T}$SED" >&6
 
@@ -3463,7 +3478,7 @@ else
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       lt_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
+      # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
@@ -3497,7 +3512,7 @@ echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
 if test "${lt_cv_prog_gnu_ld+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
 case `$LD -v 2>&1 </dev/null` in
 *GNU* | *'with BFD'*)
   lt_cv_prog_gnu_ld=yes
@@ -3527,6 +3542,15 @@ case $reload_flag in
 *) reload_flag=" $reload_flag" ;;
 esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
 
 echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
 echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
@@ -3537,36 +3561,43 @@ else
   # Let the user override the test.
   lt_cv_path_NM="$NM"
 else
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-    if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-      */dev/null* | *'Invalid file or object type'*)
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-        ;;
-      *)
-	case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	*/dev/null*)
-	  lt_cv_path_NM="$tmp_nm -p"
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
 	  break
 	  ;;
 	*)
-	  lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	  continue # so that we can try to find one that supports BSD flags
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
 	  ;;
 	esac
-      esac
-    fi
+      fi
+    done
+    IFS="$lt_save_ifs"
   done
-  IFS="$lt_save_ifs"
   test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
 fi
 fi
@@ -3613,7 +3644,7 @@ beos*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-bsdi4*)
+bsdi[45]*)
   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
   lt_cv_file_magic_cmd='/usr/bin/file -L'
   lt_cv_file_magic_test_file=/shlib/libc.so
@@ -3636,13 +3667,13 @@ darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd* | kfreebsd*-gnu)
+freebsd* | kfreebsd*-gnu | dragonfly*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
       # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
       lt_cv_file_magic_cmd=/usr/bin/file
       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
       ;;
@@ -3658,7 +3689,7 @@ gnu*)
 
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
     lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
@@ -3674,6 +3705,11 @@ hpux10.20* | hpux11*)
   esac
   ;;
 
+interix3*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
 irix5* | irix6* | nonstopux*)
   case $LD in
   *-32|*"-32 ") libmagic=32-bit;;
@@ -3686,15 +3722,6 @@ irix5* | irix6* | nonstopux*)
 
 # This must be Linux ELF.
 linux*)
-  case $host_cpu in
-  alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*|x86_64*)
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -3717,12 +3744,10 @@ nto-qnx*)
   ;;
 
 openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
   if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
   else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   fi
   ;;
 
@@ -3730,15 +3755,11 @@ osf3* | osf4* | osf5*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
 solaris*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   case $host_vendor in
   motorola)
     lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
@@ -3759,10 +3780,13 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
   siemens)
     lt_cv_deplibs_check_method=pass_all
     ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
   esac
   ;;
 
-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7* | sysv4*uw2*)
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 esac
@@ -3780,6 +3804,9 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
@@ -3815,7 +3842,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 3818 "configure"' > conftest.$ac_ext
+  echo '#line 3845 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -3858,7 +3885,7 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-    case "`/usr/bin/file conftest.o`" in
+    case `/usr/bin/file conftest.o` in
     *32-bit*)
       case $host in
         x86_64-*linux*)
@@ -3971,6 +3998,26 @@ echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
     CFLAGS="$SAVE_CFLAGS"
   fi
   ;;
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)    LD="${LD-ld} -64" ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
 
 esac
 
@@ -5064,7 +5111,12 @@ else
 fi
 
 
-ac_ext=cc
+
+
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  ac_ext=cc
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
@@ -5294,6 +5346,8 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
+fi
+
 
 ac_ext=f
 ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
@@ -5387,7 +5441,7 @@ fi
 
 
 # Provide some information about the compiler.
-echo "$as_me:5390:" \
+echo "$as_me:5444:" \
      "checking for Fortran 77 compiler version" >&5
 ac_compiler=`set X $ac_compile; echo $2`
 { (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
@@ -5577,11 +5631,55 @@ else
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
- *)
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ 	]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
     # If test is not a shell built-in, we'll probably end up computing a
     # maximum length that is only half of the actual maximum length, but
     # we can't tell.
-    while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
+    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+    while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
 	       = "XX$teststring") >/dev/null 2>&1 &&
 	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
 	    lt_cv_sys_max_cmd_len=$new_result &&
@@ -5627,9 +5725,6 @@ symcode='[BCDEGRST]'
 # Regexp to match symbols that can be accessed directly from C.
 sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
 
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
 # Transform an extracted symbol line into a proper C declaration
 lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
 
@@ -5651,15 +5746,31 @@ hpux*) # Its linker distinguishes data from code symbols
   lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
   lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
   ;;
+linux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDGIRSTW]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
 irix* | nonstopux*)
   symcode='[BCDEGRST]'
   ;;
 osf*)
   symcode='[BCDEGQRST]'
   ;;
-solaris* | sysv5*)
+solaris*)
   symcode='[BDRT]'
   ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
 sysv4)
   symcode='[DFNSTU]'
   ;;
@@ -5682,8 +5793,11 @@ esac
 # Try without a prefix undercore, then with it.
 for ac_symprfx in "" "_"; do
 
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
   # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -5845,7 +5959,7 @@ esac
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
+Xsed='sed -e 1s/^X//'
 sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
@@ -5865,7 +5979,7 @@ rm="rm -f"
 default_ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a `.a' archive for static linking (except M$VC,
+# All known linkers require a `.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
 ltmain="$ac_aux_dir/ltmain.sh"
@@ -6122,6 +6236,7 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru
 test -z "$AS" && AS=as
 test -z "$CC" && CC=cc
 test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
 test -z "$DLLTOOL" && DLLTOOL=dlltool
 test -z "$LD" && LD=ld
 test -z "$LN_S" && LN_S="ln -s"
@@ -6141,15 +6256,26 @@ old_postuninstall_cmds=
 if test -n "$RANLIB"; then
   case $host_os in
   openbsd*)
-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
     ;;
   *)
-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
     ;;
   esac
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
 
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
 # Only perform the check for file, if the check method requires it
 case $deplibs_check_method in
 file_magic*)
@@ -6175,7 +6301,7 @@ else
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
 	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
@@ -6237,7 +6363,7 @@ else
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
 	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
@@ -6332,68 +6458,25 @@ lt_simple_link_test_code='int main(){return(0);}\n'
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
 
-#
-# Check for any special shared library compilation flags.
-#
-lt_prog_cc_shlib=
-if test "$GCC" = no; then
-  case $host_os in
-  sco3.2v5*)
-    lt_prog_cc_shlib='-belf'
-    ;;
-  esac
-fi
-if test -n "$lt_prog_cc_shlib"; then
-  { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&5
-echo "$as_me: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&2;}
-  if echo "$old_CC $old_CFLAGS " | grep "[ 	]$lt_prog_cc_shlib[ 	]" >/dev/null; then :
-  else
-    { echo "$as_me:$LINENO: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
-echo "$as_me: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
-    lt_cv_prog_cc_can_build_shared=no
-  fi
-fi
-
-
-#
-# Check to make sure the static flag actually works.
-#
-echo "$as_me:$LINENO: checking if $compiler static flag $lt_prog_compiler_static works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_prog_compiler_static works... $ECHO_C" >&6
-if test "${lt_prog_compiler_static_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_prog_compiler_static_works=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_prog_compiler_static"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-     else
-       lt_prog_compiler_static_works=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
-
-if test x"$lt_prog_compiler_static_works" = xyes; then
-    :
-else
-    lt_prog_compiler_static=
-fi
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
 
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
 
 
 
@@ -6418,18 +6501,20 @@ else
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:6424: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:6507: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:6428: \$? = $ac_status" >&5
+   echo "$as_me:6511: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_rtti_exceptions=yes
      fi
    fi
@@ -6490,6 +6575,11 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_pic='-fno-common'
       ;;
 
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
     msdosdjgpp*)
       # Just because we use GCC doesn't mean we suddenly get shared libraries
       # on systems that don't support them.
@@ -6506,7 +6596,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
     hpux*)
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -6532,6 +6622,16 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic='-qnocommon'
+         lt_prog_compiler_wl='-Wl,'
+         ;;
+       esac
+       ;;
 
     mingw* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
@@ -6543,7 +6643,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_wl='-Wl,'
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -6567,12 +6667,19 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       ;;
 
     linux*)
-      case $CC in
+      case $cc_basename in
       icc* | ecc*)
 	lt_prog_compiler_wl='-Wl,'
 	lt_prog_compiler_pic='-KPIC'
 	lt_prog_compiler_static='-static'
         ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
       ccc*)
         lt_prog_compiler_wl='-Wl,'
         # All Alpha code is PIC.
@@ -6587,15 +6694,15 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static='-non_shared'
       ;;
 
-    sco3.2v5*)
-      lt_prog_compiler_pic='-Kpic'
-      lt_prog_compiler_static='-dn'
-      ;;
-
     solaris*)
-      lt_prog_compiler_wl='-Wl,'
       lt_prog_compiler_pic='-KPIC'
       lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
       ;;
 
     sunos4*)
@@ -6604,7 +6711,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static='-Bstatic'
       ;;
 
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    sysv4 | sysv4.2uw2* | sysv4.3*)
       lt_prog_compiler_wl='-Wl,'
       lt_prog_compiler_pic='-KPIC'
       lt_prog_compiler_static='-Bstatic'
@@ -6617,6 +6724,17 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       fi
       ;;
 
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
     uts4*)
       lt_prog_compiler_pic='-pic'
       lt_prog_compiler_static='-Bstatic'
@@ -6651,18 +6769,20 @@ else
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:6657: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:6775: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:6661: \$? = $ac_status" >&5
+   echo "$as_me:6779: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_prog_compiler_pic_works=yes
      fi
    fi
@@ -6683,7 +6803,7 @@ else
 fi
 
 fi
-case "$host_os" in
+case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic=
@@ -6693,6 +6813,48 @@ case "$host_os" in
     ;;
 esac
 
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works=yes
+       fi
+     else
+       lt_prog_compiler_static_works=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
+
+if test x"$lt_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
 echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
 if test "${lt_cv_prog_compiler_c_o+set}" = set; then
@@ -6711,23 +6873,25 @@ else
    # Note that $ac_compile itself does not contain backslashes and begins
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:6717: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:6879: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:6721: \$? = $ac_status" >&5
+   echo "$as_me:6883: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     if test ! -s out/conftest.err; then
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o=yes
      fi
    fi
-   chmod u+w .
+   chmod u+w . 2>&5
    $rm conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
@@ -6803,6 +6967,16 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
   extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
   case $host_os in
   cygwin* | mingw* | pw32*)
@@ -6813,6 +6987,10 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
       with_gnu_ld=no
     fi
     ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
   openbsd*)
     with_gnu_ld=no
     ;;
@@ -6823,6 +7001,27 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
     # See if GNU ld supports shared libraries.
     case $host_os in
     aix3* | aix4* | aix5*)
@@ -6873,10 +7072,10 @@ EOF
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
-      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
 
       if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
 	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
@@ -6885,7 +7084,53 @@ EOF
 	  echo EXPORTS > $output_objdir/$soname.def;
 	  cat $export_symbols >> $output_objdir/$soname.def;
 	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    interix3*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    linux*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
       else
 	ld_shlibs=no
       fi
@@ -6901,7 +7146,7 @@ EOF
       fi
       ;;
 
-    solaris* | sysv5*)
+    solaris*)
       if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
 	ld_shlibs=no
 	cat <<EOF 1>&2
@@ -6922,6 +7167,33 @@ EOF
       fi
       ;;
 
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
     sunos4*)
       archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       wlarc=
@@ -6929,31 +7201,6 @@ EOF
       hardcode_shlibpath_var=no
       ;;
 
-  linux*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_cmds="$tmp_archive_cmds"
-      supports_anon_versioning=no
-      case `$LD -v 2>/dev/null` in
-        *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-        *\ 2.11.*) ;; # other 2.11 versions
-        *) supports_anon_versioning=yes ;;
-      esac
-      if test $supports_anon_versioning = yes; then
-        archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
-        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-      else
-        archive_expsym_cmds="$tmp_archive_cmds"
-      fi
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
     *)
       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
 	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
@@ -6964,16 +7211,11 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       ;;
     esac
 
-    if test "$ld_shlibs" = yes; then
-      runpath_var=LD_RUN_PATH
-      hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-      export_dynamic_flag_spec='${wl}--export-dynamic'
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- 	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec=
-      fi
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
     fi
   else
     # PORTME fill in a description of your system's linker (not GNU ld)
@@ -6985,7 +7227,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       hardcode_minus_L=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	hardcode_direct=unsupported
@@ -7019,6 +7261,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
   	    break
   	  fi
 	  done
+	  ;;
 	esac
 
 	exp_sym_flag='-bexport'
@@ -7037,7 +7280,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       link_all_deplibs=yes
 
       if test "$GCC" = yes; then
-	case $host_os in aix4.012|aix4.012.*)
+	case $host_os in aix4.[012]|aix4.[012].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
@@ -7056,8 +7299,12 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
   	  hardcode_libdir_flag_spec='-L$libdir'
   	  hardcode_libdir_separator=
 	  fi
+	  ;;
 	esac
 	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
@@ -7065,11 +7312,11 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
   	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-  	if test "$aix_use_runtimelinking" = yes; then
+	  if test "$aix_use_runtimelinking" = yes; then
 	    shared_flag='${wl}-G'
 	  else
 	    shared_flag='${wl}-bM:SRE'
-  	fi
+	  fi
 	fi
       fi
 
@@ -7134,12 +7381,12 @@ rm -f conftest.err conftest.$ac_objext \
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
        else
 	if test "$host_cpu" = ia64; then
 	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag="-z nodefs"
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an empty executable.
 	 cat >conftest.$ac_ext <<_ACEOF
@@ -7199,13 +7446,11 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  # -berok will link without error, but may produce a broken library.
 	  no_undefined_flag=' ${wl}-bernotok'
 	  allow_undefined_flag=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  always_export_symbols=yes
 	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec=' '
+	  whole_archive_flag_spec='$convenience'
 	  archive_cmds_need_lc=yes
-	  # This is similar to how AIX traditionally builds it's shared libraries.
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 	fi
       fi
       ;;
@@ -7218,7 +7463,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ld_shlibs=no
       ;;
 
-    bsdi4*)
+    bsdi[45]*)
       export_dynamic_flag_spec=-rdynamic
       ;;
 
@@ -7244,52 +7489,52 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     darwin* | rhapsody*)
-    if test "$GXX" = yes ; then
-      archive_cmds_need_lc=no
-      case "$host_os" in
-      rhapsody* | darwin1.[012])
-	allow_undefined_flag='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	allow_undefined_flag='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[012])
-            allow_undefined_flag='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            allow_undefined_flag='-undefined dynamic_lookup'
-            ;;
-        esac
-      fi
-	;;
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
       esac
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  archive_cmds='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        archive_cmds='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      fi
-      module_cmds='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-          archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        else
-          archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        fi
-          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      archive_cmds_need_lc=no
       hardcode_direct=no
       hardcode_automatic=yes
       hardcode_shlibpath_var=unsupported
-      whole_archive_flag_spec='-all_load $convenience'
+      whole_archive_flag_spec=''
       link_all_deplibs=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
     else
-      ld_shlibs=no
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs=no
+          ;;
+      esac
     fi
       ;;
 
@@ -7323,7 +7568,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu)
+    freebsd* | kfreebsd*-gnu | dragonfly*)
       archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_direct=yes
@@ -7346,47 +7591,62 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       export_dynamic_flag_spec='${wl}-E'
       ;;
 
-    hpux10* | hpux11*)
+    hpux10*)
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*|ia64*)
+	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	hardcode_direct=yes
+	export_dynamic_flag_spec='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
 	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
 	*)
 	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
-	case "$host_cpu" in
-	hppa*64*|ia64*)
-	  archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
       if test "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*)
-	  hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	  hardcode_libdir_flag_spec_ld='+b $libdir'
-	  hardcode_libdir_separator=:
-	  hardcode_direct=no
-	  hardcode_shlibpath_var=no
-	  ;;
-	ia64*)
-	  hardcode_libdir_flag_spec='-L$libdir'
-	  hardcode_direct=no
-	  hardcode_shlibpath_var=no
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L=yes
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld='+b $libdir'
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
 	  ;;
 	*)
-	  hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	  hardcode_libdir_separator=:
 	  hardcode_direct=yes
 	  export_dynamic_flag_spec='${wl}-E'
 
@@ -7434,6 +7694,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var=no
       if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
 	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
 	hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
 	export_dynamic_flag_spec='${wl}-E'
       else
@@ -7479,7 +7740,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	allow_undefined_flag=' -expect_unresolved \*'
 	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec='-rpath $libdir'
@@ -7487,21 +7748,15 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_libdir_separator=:
       ;;
 
-    sco3.2v5*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      export_dynamic_flag_spec='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
     solaris*)
       no_undefined_flag=' -z text'
       if test "$GCC" = yes; then
+	wlarc='${wl}'
 	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
 	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
       else
+	wlarc=''
 	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
   	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
@@ -7510,8 +7765,18 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var=no
       case $host_os in
       solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+      *)
+ 	# The compiler driver will combine linker options so we
+ 	# cannot just pass the convience library names through
+ 	# without $wl, iff we do not link with $LD.
+ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+ 	case $wlarc in
+ 	'')
+ 	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+ 	*)
+ 	  whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	esac ;;
       esac
       link_all_deplibs=yes
       ;;
@@ -7568,36 +7833,45 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       fi
       ;;
 
-    sysv4.2uw2*)
-      archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_minus_L=no
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
+      runpath_var='LD_RUN_PATH'
 
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[78]* | unixware7*)
-      no_undefined_flag='${wl}-z ${wl}text'
       if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var=no
       ;;
 
-    sysv5*)
-      no_undefined_flag=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      hardcode_libdir_flag_spec=
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
       ;;
 
     uts4*)
@@ -7616,11 +7890,6 @@ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
 echo "${ECHO_T}$ld_shlibs" >&6
 test "$ld_shlibs" = no && can_build_shared=no
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
 #
 # Do we need to explicitly link libc?
 #
@@ -7653,6 +7922,7 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
         libobjs=conftest.$ac_objext
         deplibs=
         wl=$lt_prog_compiler_wl
+	pic_flag=$lt_prog_compiler_pic
         compiler_flags=-v
         linker_flags=-v
         verstring=
@@ -7785,7 +8055,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[45]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -7813,7 +8083,8 @@ cygwin* | mingw* | pw32*)
       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $rm \$dlpath'
@@ -7843,7 +8114,7 @@ cygwin* | mingw* | pw32*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
     ;;
@@ -7866,7 +8137,7 @@ darwin* | rhapsody*)
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
   # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
   if test "$GCC" = yes; then
     sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -7901,8 +8172,17 @@ kfreebsd*-gnu)
   dynamic_linker='GNU ld.so'
   ;;
 
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
@@ -7920,14 +8200,19 @@ freebsd*)
   freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
-  freebsd3.01* | freebsdelf3.01*)
+  freebsd3.[01]* | freebsdelf3.[01]*)
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
-  *) # from 3.2 on
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
   esac
   ;;
 
@@ -7947,7 +8232,7 @@ hpux9* | hpux10* | hpux11*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
     shrext_cmds='.so'
     hardcode_into_libs=yes
@@ -7987,6 +8272,18 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
@@ -8044,31 +8341,10 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 8051 "configure"' > conftest.$ac_ext
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
-
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -8129,8 +8405,13 @@ nto-qnx*)
 
 openbsd*)
   version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
   need_lib_prefix=no
-  need_version=yes
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -8168,13 +8449,6 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
 solaris*)
   version_type=linux
   need_lib_prefix=no
@@ -8200,7 +8474,7 @@ sunos4*)
   need_version=yes
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -8233,6 +8507,29 @@ sysv4*MP*)
   fi
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -8248,12 +8545,17 @@ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
 echo "${ECHO_T}$dynamic_linker" >&6
 test "$dynamic_linker" = no && can_build_shared=no
 
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
 echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
 hardcode_action=
 if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var " || \
-   test "X$hardcode_automatic"="Xyes" ; then
+   test -n "$runpath_var" || \
+   test "X$hardcode_automatic" = "Xyes" ; then
 
   # We can hardcode non-existant directories.
   if test "$hardcode_direct" != no &&
@@ -8903,7 +9205,7 @@ fi
     test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
     save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
     save_LIBS="$LIBS"
     LIBS="$lt_cv_dlopen_libs $LIBS"
@@ -8919,7 +9221,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 8922 "configure"
+#line 9224 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -8976,6 +9278,8 @@ int main ()
       else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
       /* dlclose (self); */
     }
+  else
+    puts (dlerror ());
 
     exit (status);
 }
@@ -8985,12 +9289,12 @@ EOF
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
+    (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
       x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
       x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
     esac
   else :
     # compilation failed
@@ -9005,7 +9309,7 @@ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
 echo "${ECHO_T}$lt_cv_dlopen_self" >&6
 
     if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
 echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
 if test "${lt_cv_dlopen_self_static+set}" = set; then
@@ -9017,7 +9321,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 9020 "configure"
+#line 9324 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -9074,6 +9378,8 @@ int main ()
       else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
       /* dlclose (self); */
     }
+  else
+    puts (dlerror ());
 
     exit (status);
 }
@@ -9083,12 +9389,12 @@ EOF
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
+    (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
       x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
       x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
     esac
   else :
     # compilation failed
@@ -9121,7 +9427,7 @@ echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
 fi
 
 
-# Report which librarie types wil actually be built
+# Report which library types will actually be built
 echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
 echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
 echo "$as_me:$LINENO: result: $can_build_shared" >&5
@@ -9133,7 +9439,7 @@ test "$can_build_shared" = "no" && enable_shared=no
 
 # On AIX, shared libraries and static libraries use the same namespace, and
 # are all built from PIC.
-case "$host_os" in
+case $host_os in
 aix3*)
   test "$enable_shared" = yes && enable_static=no
   if test -n "$RANLIB"; then
@@ -9145,43 +9451,6 @@ aix3*)
 aix4* | aix5*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-  darwin* | rhapsody*)
-  if test "$GCC" = yes; then
-    archive_cmds_need_lc=no
-    case "$host_os" in
-    rhapsody* | darwin1.[012])
-      allow_undefined_flag='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	allow_undefined_flag='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[012])
-            allow_undefined_flag='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            allow_undefined_flag='-undefined dynamic_lookup'
-            ;;
-        esac
-      fi
-      ;;
-    esac
-    output_verbose_link_cmd='echo'
-    archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-    module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-    archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    hardcode_direct=no
-    hardcode_automatic=yes
-    hardcode_shlibpath_var=unsupported
-    whole_archive_flag_spec='-all_load $convenience'
-    link_all_deplibs=yes
-  else
-    ld_shlibs=no
   fi
     ;;
 esac
@@ -9208,7 +9477,7 @@ if test -f "$ltmain"; then
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
     SED SHELL STRIP \
     libname_spec library_names_spec soname_spec extract_expsyms_cmds \
     old_striplib striplib file_magic_cmd finish_cmds finish_eval \
@@ -9312,7 +9581,7 @@ echo "$as_me: creating $ofile" >&6;}
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -9323,11 +9592,11 @@ echo "$as_me: creating $ofile" >&6;}
 SED=$lt_SED
 
 # Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e s/^X//"
+Xsed="$SED -e 1s/^X//"
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 # The names of the tagged configurations supported by this script.
 available_tags=
@@ -9357,6 +9626,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -9368,6 +9643,9 @@ AR_FLAGS=$lt_AR_FLAGS
 # A C compiler.
 LTCC=$lt_LTCC
 
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
 # A language-specific compiler.
 CC=$lt_compiler
 
@@ -9433,7 +9711,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_lt_cv_prog_compiler_c_o
 
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
 # Do we need the lib prefix for modules?
@@ -9698,6 +9976,9 @@ echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script
 echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
     fi
   fi
+  if test -z "$LTCFLAGS"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
+  fi
 
   # Extract list of available tagged configurations in $ofile.
   # Note that this assumes the entire list is on one line.
@@ -9728,7 +10009,9 @@ echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
 
       case $tagname in
       CXX)
-	if test -n "$CXX" && test "X$CXX" != "Xno"; then
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+	    (test "X$CXX" != "Xg++"))) ; then
 	  ac_ext=cc
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -9748,6 +10031,7 @@ hardcode_libdir_flag_spec_CXX=
 hardcode_libdir_flag_spec_ld_CXX=
 hardcode_libdir_separator_CXX=
 hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
 hardcode_automatic_CXX=no
 module_cmds_CXX=
 module_expsym_cmds_CXX=
@@ -9765,7 +10049,7 @@ postdeps_CXX=
 compiler_lib_search_path_CXX=
 
 # Source file extension for C++ test sources.
-ac_ext=cc
+ac_ext=cpp
 
 # Object file extension for compiled C++ test sources.
 objext=o
@@ -9775,17 +10059,34 @@ objext_CXX=$objext
 lt_simple_compile_test_code="int some_variable = 0;\n"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *) { return(0); }\n'
+lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
 
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
 # Allow CC to be a program name with arguments.
 lt_save_CC=$CC
 lt_save_LD=$LD
@@ -9796,18 +10097,27 @@ lt_save_path_LD=$lt_cv_path_LD
 if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
   lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
 else
-  unset lt_cv_prog_gnu_ld
+  $as_unset lt_cv_prog_gnu_ld
 fi
 if test -n "${lt_cv_path_LDCXX+set}"; then
   lt_cv_path_LD=$lt_cv_path_LDCXX
 else
-  unset lt_cv_path_LD
+  $as_unset lt_cv_path_LD
 fi
 test -z "${LDCXX+set}" || LD=$LDCXX
 CC=${CXX-"c++"}
 compiler=$CC
 compiler_CXX=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
 
 # We don't want -fno-exception wen compiling C++ code, so set the
 # no_builtin_flag separately
@@ -9878,7 +10188,7 @@ else
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       lt_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
+      # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
@@ -9912,7 +10222,7 @@ echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
 if test "${lt_cv_prog_gnu_ld+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
 case `$LD -v 2>&1 </dev/null` in
 *GNU* | *'with BFD'*)
   lt_cv_prog_gnu_ld=yes
@@ -10003,6 +10313,7 @@ case $host_os in
 	    ;;
 	  esac
 	done
+	;;
       esac
 
       exp_sym_flag='-bexport'
@@ -10021,7 +10332,7 @@ case $host_os in
     link_all_deplibs_CXX=yes
 
     if test "$GXX" = yes; then
-      case $host_os in aix4.012|aix4.012.*)
+      case $host_os in aix4.[012]|aix4.[012].*)
       # We only want to do this on AIX 4.2 and lower, the check
       # below for broken collect2 doesn't work under 4.3+
 	collect2name=`${CC} -print-prog-name=collect2`
@@ -10040,8 +10351,12 @@ case $host_os in
 	  hardcode_libdir_flag_spec_CXX='-L$libdir'
 	  hardcode_libdir_separator_CXX=
 	fi
+	;;
       esac
       shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+	shared_flag="$shared_flag "'${wl}-G'
+      fi
     else
       # not using gcc
       if test "$host_cpu" = ia64; then
@@ -10119,12 +10434,12 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
       hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
      else
       if test "$host_cpu" = ia64; then
 	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
 	allow_undefined_flag_CXX="-z nodefs"
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
       else
 	# Determine the default libpath from the value encoded in an empty executable.
 	cat >conftest.$ac_ext <<_ACEOF
@@ -10184,16 +10499,26 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	# -berok will link without error, but may produce a broken library.
 	no_undefined_flag_CXX=' ${wl}-bernotok'
 	allow_undefined_flag_CXX=' ${wl}-berok'
-	# -bexpall does not export symbols beginning with underscore (_)
-	always_export_symbols_CXX=yes
 	# Exported symbols can be pulled into shared objects from archives
-	whole_archive_flag_spec_CXX=' '
+	whole_archive_flag_spec_CXX='$convenience'
 	archive_cmds_need_lc_CXX=yes
-	# This is similar to how AIX traditionally builds it's shared libraries.
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	# This is similar to how AIX traditionally builds its shared libraries.
+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
       fi
     fi
     ;;
+
+  beos*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag_CXX=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs_CXX=no
+    fi
+    ;;
+
   chorus*)
     case $cc_basename in
       *)
@@ -10212,7 +10537,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     enable_shared_with_static_runtimes_CXX=yes
 
     if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       # If the export-symbols file already is a .def file (1st line
       # is EXPORTS), use it as is; otherwise, prepend...
       archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
@@ -10221,70 +10546,81 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	echo EXPORTS > $output_objdir/$soname.def;
 	cat $export_symbols >> $output_objdir/$soname.def;
       fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
     else
       ld_shlibs_CXX=no
     fi
   ;;
-
-  darwin* | rhapsody*)
-  if test "$GXX" = yes; then
-    archive_cmds_need_lc_CXX=no
-    case "$host_os" in
-    rhapsody* | darwin1.[012])
-      allow_undefined_flag_CXX='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	allow_undefined_flag_CXX='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[012])
-            allow_undefined_flag_CXX='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            allow_undefined_flag_CXX='-undefined dynamic_lookup'
-            ;;
+      darwin* | rhapsody*)
+        case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
         esac
-      fi
-      ;;
-    esac
-    lt_int_apple_cc_single_mod=no
-    output_verbose_link_cmd='echo'
-    if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-      lt_int_apple_cc_single_mod=yes
-    fi
-    if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-      archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    else
-      archive_cmds_CXX='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    fi
-    module_cmds_CXX='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      archive_cmds_need_lc_CXX=no
+      hardcode_direct_CXX=no
+      hardcode_automatic_CXX=yes
+      hardcode_shlibpath_var_CXX=unsupported
+      whole_archive_flag_spec_CXX=''
+      link_all_deplibs_CXX=yes
 
-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-    if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-      archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    else
-      archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    fi
-    module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    hardcode_direct_CXX=no
-    hardcode_automatic_CXX=yes
-    hardcode_shlibpath_var_CXX=unsupported
-    whole_archive_flag_spec_CXX='-all_load $convenience'
-    link_all_deplibs_CXX=yes
-  else
-    ld_shlibs_CXX=no
-  fi
-    ;;
+    if test "$GXX" = yes ; then
+      lt_int_apple_cc_single_mod=no
+      output_verbose_link_cmd='echo'
+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+       lt_int_apple_cc_single_mod=yes
+      fi
+      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+       archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      else
+          archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        fi
+        module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          else
+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          fi
+            module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_CXX=no
+          ;;
+      esac
+      fi
+        ;;
 
   dgux*)
     case $cc_basename in
-      ec++)
+      ec++*)
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
 	;;
-      ghcx)
+      ghcx*)
 	# Green Hills C++ Compiler
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
@@ -10295,14 +10631,14 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	;;
     esac
     ;;
-  freebsd12*)
+  freebsd[12]*)
     # C++ shared libraries reported to be fairly broken before switch to ELF
     ld_shlibs_CXX=no
     ;;
   freebsd-elf*)
     archive_cmds_need_lc_CXX=no
     ;;
-  freebsd* | kfreebsd*-gnu)
+  freebsd* | kfreebsd*-gnu | dragonfly*)
     # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
     # conventions
     ld_shlibs_CXX=yes
@@ -10319,11 +10655,11 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 				# location of the library.
 
     case $cc_basename in
-    CC)
+    CC*)
       # FIXME: insert proper C++ library support
       ld_shlibs_CXX=no
       ;;
-    aCC)
+    aCC*)
       archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       # Commands to make compiler produce verbose output that lists
       # what "hidden" libraries, object files and flags are used when
@@ -10333,7 +10669,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # explicitly linking system object files so we need to strip them
       # from the output so that they don't get included in the library
       # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
       ;;
     *)
       if test "$GXX" = yes; then
@@ -10347,34 +10683,23 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     ;;
   hpux10*|hpux11*)
     if test $with_gnu_ld = no; then
-      case "$host_cpu" in
-      hppa*64*)
-	hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_CXX=:
+
+      case $host_cpu in
+      hppa*64*|ia64*)
 	hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
-	hardcode_libdir_separator_CXX=:
-        ;;
-      ia64*)
-	hardcode_libdir_flag_spec_CXX='-L$libdir'
         ;;
       *)
-	hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_CXX=:
 	export_dynamic_flag_spec_CXX='${wl}-E'
         ;;
       esac
     fi
-    case "$host_cpu" in
-    hppa*64*)
+    case $host_cpu in
+    hppa*64*|ia64*)
       hardcode_direct_CXX=no
       hardcode_shlibpath_var_CXX=no
       ;;
-    ia64*)
-      hardcode_direct_CXX=no
-      hardcode_shlibpath_var_CXX=no
-      hardcode_minus_L_CXX=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
-      ;;
     *)
       hardcode_direct_CXX=yes
       hardcode_minus_L_CXX=yes # Not in the search PATH,
@@ -10384,14 +10709,17 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     esac
 
     case $cc_basename in
-      CC)
+      CC*)
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
 	;;
-      aCC)
-	case "$host_cpu" in
-	hppa*64*|ia64*)
-	  archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+      aCC*)
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	  ;;
 	*)
 	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
@@ -10410,9 +10738,12 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       *)
 	if test "$GXX" = yes; then
 	  if test $with_gnu_ld = no; then
-	    case "$host_cpu" in
-	    ia64*|hppa*64*)
-	      archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+	    case $host_cpu in
+	    hppa*64*)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    ia64*)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	      ;;
 	    *)
 	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
@@ -10426,11 +10757,25 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	;;
     esac
     ;;
+  interix3*)
+    hardcode_direct_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+    export_dynamic_flag_spec_CXX='${wl}-E'
+    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+    # Instead, shared libraries are loaded at an image base (0x10000000 by
+    # default) and relocated if they conflict, which is a slow very memory
+    # consuming and fragmenting process.  To avoid this, we pick a random,
+    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    ;;
   irix5* | irix6*)
     case $cc_basename in
-      CC)
+      CC*)
 	# SGI C++
-	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	# Archives containing C++ object files must be created using
 	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -10441,7 +10786,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       *)
 	if test "$GXX" = yes; then
 	  if test "$with_gnu_ld" = no; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	  else
 	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
 	  fi
@@ -10454,7 +10799,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     ;;
   linux*)
     case $cc_basename in
-      KCC)
+      KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	# KCC will only create a shared library if the output file
@@ -10479,17 +10824,41 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
 	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
 	;;
-      icpc)
+      icpc*)
 	# Intel C++
 	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+	  tmp_idyn=
+	  case $host_cpu in
+	    ia64*) tmp_idyn=' -i_dynamic';;
+	  esac
+  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
 	archive_cmds_need_lc_CXX=no
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
 	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
 	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 	;;
-      cxx)
+      pgCC*)
+        # Portland Group C++ compiler
+	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+  	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        ;;
+      cxx*)
 	# Compaq C++
 	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
 	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
@@ -10520,7 +10889,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     ;;
   mvs*)
     case $cc_basename in
-      cxx)
+      cxx*)
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
 	;;
@@ -10541,9 +10910,25 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     # Workaround some broken pre-1.5 toolchains
     output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
     ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    ld_shlibs_CXX=no
+    ;;
+  openbsd*)
+    hardcode_direct_CXX=yes
+    hardcode_shlibpath_var_CXX=no
+    archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+      export_dynamic_flag_spec_CXX='${wl}-E'
+      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    fi
+    output_verbose_link_cmd='echo'
+    ;;
   osf3*)
     case $cc_basename in
-      KCC)
+      KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	# KCC will only create a shared library if the output file
@@ -10559,14 +10944,14 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
 
 	;;
-      RCC)
+      RCC*)
 	# Rational C++ 2.4.1
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
 	;;
-      cxx)
+      cxx*)
 	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 	hardcode_libdir_separator_CXX=:
@@ -10584,7 +10969,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       *)
 	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 
 	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 	  hardcode_libdir_separator_CXX=:
@@ -10603,7 +10988,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     ;;
   osf4* | osf5*)
     case $cc_basename in
-      KCC)
+      KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
 
 	# KCC will only create a shared library if the output file
@@ -10618,17 +11003,17 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	# the KAI C++ compiler.
 	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
 	;;
-      RCC)
+      RCC*)
 	# Rational C++ 2.4.1
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
 	;;
-      cxx)
+      cxx*)
 	allow_undefined_flag_CXX=' -expect_unresolved \*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
 	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry $objdir/so_locations -o $lib~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
 	  $rm $lib.exp'
 
 	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
@@ -10647,7 +11032,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       *)
 	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 
 	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 	  hardcode_libdir_separator_CXX=:
@@ -10668,27 +11053,14 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     # FIXME: insert proper C++ library support
     ld_shlibs_CXX=no
     ;;
-  sco*)
-    archive_cmds_need_lc_CXX=no
-    case $cc_basename in
-      CC)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
   sunos4*)
     case $cc_basename in
-      CC)
+      CC*)
 	# Sun C++ 4.x
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
 	;;
-      lcc)
+      lcc*)
 	# Lucid
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
@@ -10701,36 +11073,33 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     ;;
   solaris*)
     case $cc_basename in
-      CC)
+      CC*)
 	# Sun C++ 4.2, 5.x and Centerline C++
+        archive_cmds_need_lc_CXX=yes
 	no_undefined_flag_CXX=' -zdefs'
-	archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
 
 	hardcode_libdir_flag_spec_CXX='-R$libdir'
 	hardcode_shlibpath_var_CXX=no
 	case $host_os in
-	  solaris2.0-5 | solaris2.0-5.*) ;;
+	  solaris2.[0-5] | solaris2.[0-5].*) ;;
 	  *)
 	    # The C++ compiler is used as linker so we must use $wl
 	    # flag to pass the commands to the underlying system
-	    # linker.
+	    # linker. We must also pass each convience library through
+	    # to the system linker between allextract/defaultextract.
+	    # The C++ compiler will combine linker options so we
+	    # cannot just pass the convience library names through
+	    # without $wl.
 	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
 	    ;;
 	esac
 	link_all_deplibs_CXX=yes
 
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[LR]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	output_verbose_link_cmd='echo'
 
 	# Archives containing C++ object files must be created using
 	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -10738,7 +11107,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	# in the archive.
 	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
 	;;
-      gcx)
+      gcx*)
 	# Green Hills C++ Compiler
 	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 
@@ -10776,12 +11145,63 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	;;
     esac
     ;;
-  sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
+  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+    no_undefined_flag_CXX='${wl}-z,text'
     archive_cmds_need_lc_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  sysv5* | sco3.2v5* | sco5v6*)
+    # Note: We can NOT use -z defs as we might desire, because we do not
+    # link with -lc, and that would cause any symbols used from libc to
+    # always be unresolved, which means just about no library would
+    # ever link correctly.  If we're not using GNU ld we use -z text
+    # though, which does catch some bad symbols but isn't as heavy-handed
+    # as -z defs.
+    # For security reasons, it is highly recommended that you always
+    # use absolute paths for naming shared libraries, and exclude the
+    # DT_RUNPATH tag from executables and libraries.  But doing so
+    # requires that you compile everything twice, which is a pain.
+    # So that behaviour is only enabled if SCOABSPATH is set to a
+    # non-empty value in the environment.  Most likely only useful for
+    # creating official distributions of packages.
+    # This is a hack until libtool officially supports absolute path
+    # names for shared libraries.
+    no_undefined_flag_CXX='${wl}-z,text'
+    allow_undefined_flag_CXX='${wl}-z,nodefs'
+    archive_cmds_need_lc_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+    hardcode_libdir_separator_CXX=':'
+    link_all_deplibs_CXX=yes
+    export_dynamic_flag_spec_CXX='${wl}-Bexport'
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
     ;;
   tandem*)
     case $cc_basename in
-      NCC)
+      NCC*)
 	# NonStop-UX NCC 3.20
 	# FIXME: insert proper C++ library support
 	ld_shlibs_CXX=no
@@ -10834,7 +11254,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   # The `*' in the case matches for architectures that use `case' in
   # $output_verbose_cmd can trigger glob expansion during the loop
   # eval without this substitution.
-  output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
+  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
 
   for p in `eval $output_verbose_link_cmd`; do
     case $p in
@@ -10910,6 +11330,29 @@ fi
 
 $rm -f confest.$objext
 
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix3*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  predep_objects_CXX=
+  postdep_objects_CXX=
+  postdeps_CXX=
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    postdeps_CXX='-lCstd -lCrun'
+    ;;
+  esac
+  ;;
+esac
+
+
 case " $postdeps_CXX " in
 *" -lc "*) archive_cmds_need_lc_CXX=no ;;
 esac
@@ -10957,6 +11400,10 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       # DJGPP does not support shared libraries at all
       lt_prog_compiler_pic_CXX=
       ;;
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
     sysv4*MP*)
       if test -d /usr/nec; then
 	lt_prog_compiler_pic_CXX=-Kconform_pic
@@ -10965,7 +11412,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
     hpux*)
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	;;
       *)
@@ -10990,18 +11437,28 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	;;
       chorus*)
 	case $cc_basename in
-	cxch68)
+	cxch68*)
 	  # Green Hills C++ Compiler
 	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
 	  ;;
 	esac
 	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case $cc_basename in
+           xlc*)
+           lt_prog_compiler_pic_CXX='-qnocommon'
+           lt_prog_compiler_wl_CXX='-Wl,'
+           ;;
+         esac
+       ;;
       dgux*)
 	case $cc_basename in
-	  ec++)
+	  ec++*)
 	    lt_prog_compiler_pic_CXX='-KPIC'
 	    ;;
-	  ghcx)
+	  ghcx*)
 	    # Green Hills C++ Compiler
 	    lt_prog_compiler_pic_CXX='-pic'
 	    ;;
@@ -11009,22 +11466,22 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	    ;;
 	esac
 	;;
-      freebsd* | kfreebsd*-gnu)
+      freebsd* | kfreebsd*-gnu | dragonfly*)
 	# FreeBSD uses GNU C++
 	;;
       hpux9* | hpux10* | hpux11*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
 	    if test "$host_cpu" != ia64; then
 	      lt_prog_compiler_pic_CXX='+Z'
 	    fi
 	    ;;
-	  aCC)
+	  aCC*)
 	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-	    case "$host_cpu" in
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    case $host_cpu in
 	    hppa*64*|ia64*)
 	      # +Z the default
 	      ;;
@@ -11037,9 +11494,13 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	    ;;
 	esac
 	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
       irix5* | irix6* | nonstopux*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    lt_prog_compiler_wl_CXX='-Wl,'
 	    lt_prog_compiler_static_CXX='-non_shared'
 	    # CC pic flag -KPIC is the default.
@@ -11050,18 +11511,24 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	;;
       linux*)
 	case $cc_basename in
-	  KCC)
+	  KCC*)
 	    # KAI C++ Compiler
 	    lt_prog_compiler_wl_CXX='--backend -Wl,'
 	    lt_prog_compiler_pic_CXX='-fPIC'
 	    ;;
-	  icpc)
+	  icpc* | ecpc*)
 	    # Intel C++
 	    lt_prog_compiler_wl_CXX='-Wl,'
 	    lt_prog_compiler_pic_CXX='-KPIC'
 	    lt_prog_compiler_static_CXX='-static'
 	    ;;
-	  cxx)
+	  pgCC*)
+	    # Portland Group C++ compiler.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fpic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  cxx*)
 	    # Compaq C++
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
 	    # Linux and Compaq Tru64 Unix objects are PIC.
@@ -11078,7 +11545,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	;;
       mvs*)
 	case $cc_basename in
-	  cxx)
+	  cxx*)
 	    lt_prog_compiler_pic_CXX='-W c,exportall'
 	    ;;
 	  *)
@@ -11089,14 +11556,14 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	;;
       osf3* | osf4* | osf5*)
 	case $cc_basename in
-	  KCC)
+	  KCC*)
 	    lt_prog_compiler_wl_CXX='--backend -Wl,'
 	    ;;
-	  RCC)
+	  RCC*)
 	    # Rational C++ 2.4.1
 	    lt_prog_compiler_pic_CXX='-pic'
 	    ;;
-	  cxx)
+	  cxx*)
 	    # Digital/Compaq C++
 	    lt_prog_compiler_wl_CXX='-Wl,'
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
@@ -11110,24 +11577,15 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	;;
       psos*)
 	;;
-      sco*)
-	case $cc_basename in
-	  CC)
-	    lt_prog_compiler_pic_CXX='-fPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
       solaris*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
 	    lt_prog_compiler_pic_CXX='-KPIC'
 	    lt_prog_compiler_static_CXX='-Bstatic'
 	    lt_prog_compiler_wl_CXX='-Qoption ld '
 	    ;;
-	  gcx)
+	  gcx*)
 	    # Green Hills C++ Compiler
 	    lt_prog_compiler_pic_CXX='-PIC'
 	    ;;
@@ -11137,12 +11595,12 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	;;
       sunos4*)
 	case $cc_basename in
-	  CC)
+	  CC*)
 	    # Sun C++ 4.x
 	    lt_prog_compiler_pic_CXX='-pic'
 	    lt_prog_compiler_static_CXX='-Bstatic'
 	    ;;
-	  lcc)
+	  lcc*)
 	    # Lucid
 	    lt_prog_compiler_pic_CXX='-pic'
 	    ;;
@@ -11152,7 +11610,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	;;
       tandem*)
 	case $cc_basename in
-	  NCC)
+	  NCC*)
 	    # NonStop-UX NCC 3.20
 	    lt_prog_compiler_pic_CXX='-KPIC'
 	    ;;
@@ -11160,7 +11618,14 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	    ;;
 	esac
 	;;
-      unixware*)
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	esac
 	;;
       vxworks*)
 	;;
@@ -11193,18 +11658,20 @@ else
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:11199: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:11664: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:11203: \$? = $ac_status" >&5
+   echo "$as_me:11668: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_prog_compiler_pic_works_CXX=yes
      fi
    fi
@@ -11225,7 +11692,7 @@ else
 fi
 
 fi
-case "$host_os" in
+case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic_CXX=
@@ -11235,6 +11702,48 @@ case "$host_os" in
     ;;
 esac
 
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works_CXX=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works_CXX=yes
+       fi
+     else
+       lt_prog_compiler_static_works_CXX=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6
+
+if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
+    :
+else
+    lt_prog_compiler_static_CXX=
+fi
+
+
 echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
 if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
@@ -11253,23 +11762,25 @@ else
    # Note that $ac_compile itself does not contain backslashes and begins
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:11259: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:11768: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:11263: \$? = $ac_status" >&5
+   echo "$as_me:11772: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     if test ! -s out/conftest.err; then
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o_CXX=yes
      fi
    fi
-   chmod u+w .
+   chmod u+w . 2>&5
    $rm conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
@@ -11324,7 +11835,7 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
     export_symbols_cmds_CXX="$ltdll_cmds"
   ;;
   cygwin* | mingw*)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   *)
     export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
@@ -11335,11 +11846,6 @@ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
 echo "${ECHO_T}$ld_shlibs_CXX" >&6
 test "$ld_shlibs_CXX" = no && can_build_shared=no
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
 #
 # Do we need to explicitly link libc?
 #
@@ -11372,6 +11878,7 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
         libobjs=conftest.$ac_objext
         deplibs=
         wl=$lt_prog_compiler_wl_CXX
+	pic_flag=$lt_prog_compiler_pic_CXX
         compiler_flags=-v
         linker_flags=-v
         verstring=
@@ -11504,7 +12011,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[45]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -11532,7 +12039,8 @@ cygwin* | mingw* | pw32*)
       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $rm \$dlpath'
@@ -11562,7 +12070,7 @@ cygwin* | mingw* | pw32*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
     ;;
@@ -11585,7 +12093,7 @@ darwin* | rhapsody*)
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
   # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
   if test "$GCC" = yes; then
     sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -11620,8 +12128,17 @@ kfreebsd*-gnu)
   dynamic_linker='GNU ld.so'
   ;;
 
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
@@ -11639,14 +12156,19 @@ freebsd*)
   freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
-  freebsd3.01* | freebsdelf3.01*)
+  freebsd3.[01]* | freebsdelf3.[01]*)
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
-  *) # from 3.2 on
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
   esac
   ;;
 
@@ -11666,7 +12188,7 @@ hpux9* | hpux10* | hpux11*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
     shrext_cmds='.so'
     hardcode_into_libs=yes
@@ -11706,6 +12228,18 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
@@ -11763,31 +12297,10 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 11770 "configure"' > conftest.$ac_ext
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
-
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -11848,8 +12361,13 @@ nto-qnx*)
 
 openbsd*)
   version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
   need_lib_prefix=no
-  need_version=yes
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -11887,13 +12405,6 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
 solaris*)
   version_type=linux
   need_lib_prefix=no
@@ -11919,7 +12430,7 @@ sunos4*)
   need_version=yes
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -11952,6 +12463,29 @@ sysv4*MP*)
   fi
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -11967,12 +12501,17 @@ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
 echo "${ECHO_T}$dynamic_linker" >&6
 test "$dynamic_linker" = no && can_build_shared=no
 
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
 echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
 hardcode_action_CXX=
 if test -n "$hardcode_libdir_flag_spec_CXX" || \
-   test -n "$runpath_var CXX" || \
-   test "X$hardcode_automatic_CXX"="Xyes" ; then
+   test -n "$runpath_var_CXX" || \
+   test "X$hardcode_automatic_CXX" = "Xyes" ; then
 
   # We can hardcode non-existant directories.
   if test "$hardcode_direct_CXX" != no &&
@@ -12004,841 +12543,6 @@ elif test "$shlibpath_overrides_runpath" = yes ||
   enable_fast_install=needless
 fi
 
-striplib=
-old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-       else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-       ;;
-   *)
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-    ;;
-  esac
-fi
-
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-   ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-
-fi
-
-   ;;
-
-  *)
-    echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
-if test "${ac_cv_func_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define shl_load innocuous_shl_load
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef shl_load
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
-choke me
-#else
-char (*f) () = shl_load;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != shl_load;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_shl_load=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6
-if test $ac_cv_func_shl_load = yes; then
-  lt_cv_dlopen="shl_load"
-else
-  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-int
-main ()
-{
-shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_shl_load=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
-if test $ac_cv_lib_dld_shl_load = yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-else
-  echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
-if test "${ac_cv_func_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define dlopen innocuous_dlopen
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef dlopen
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
-choke me
-#else
-char (*f) () = dlopen;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != dlopen;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6
-if test $ac_cv_func_dlopen = yes; then
-  lt_cv_dlopen="dlopen"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_svld_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_svld_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
-if test $ac_cv_lib_svld_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
-  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dld_link ();
-int
-main ()
-{
-dld_link ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_dld_link=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_dld_link=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
-if test $ac_cv_lib_dld_dld_link = yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 12641 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self_static+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self_static=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 12739 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self_static=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-
 
 # The else clause should only fire when bootstrapping the
 # libtool distribution, otherwise you forgot to ship ltmain.sh
@@ -12853,7 +12557,7 @@ if test -f "$ltmain"; then
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
     SED SHELL STRIP \
     libname_spec library_names_spec soname_spec extract_expsyms_cmds \
     old_striplib striplib file_magic_cmd finish_cmds finish_eval \
@@ -12954,6 +12658,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -12965,6 +12675,9 @@ AR_FLAGS=$lt_AR_FLAGS
 # A C compiler.
 LTCC=$lt_LTCC
 
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
 # A language-specific compiler.
 CC=$lt_compiler_CXX
 
@@ -13030,7 +12743,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
 
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
 # Do we need the lib prefix for modules?
@@ -13307,16 +13020,42 @@ lt_simple_link_test_code="      program t\n      end\n"
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
 
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
 CC=${F77-"f77"}
 compiler=$CC
 compiler_F77=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
 
 echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
 echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
@@ -13329,7 +13068,7 @@ test "$can_build_shared" = "no" && enable_shared=no
 
 # On AIX, shared libraries and static libraries use the same namespace, and
 # are all built from PIC.
-case "$host_os" in
+case $host_os in
 aix3*)
   test "$enable_shared" = yes && enable_static=no
   if test -n "$RANLIB"; then
@@ -13338,7 +13077,9 @@ aix3*)
   fi
   ;;
 aix4* | aix5*)
-  test "$enable_shared" = yes && enable_static=no
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
   ;;
 esac
 echo "$as_me:$LINENO: result: $enable_shared" >&5
@@ -13351,8 +13092,6 @@ test "$enable_shared" = yes || enable_static=yes
 echo "$as_me:$LINENO: result: $enable_static" >&5
 echo "${ECHO_T}$enable_static" >&6
 
-test "$ld_shlibs_F77" = no && can_build_shared=no
-
 GCC_F77="$G77"
 LD_F77="$LD"
 
@@ -13399,6 +13138,11 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_pic_F77='-fno-common'
       ;;
 
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
     msdosdjgpp*)
       # Just because we use GCC doesn't mean we suddenly get shared libraries
       # on systems that don't support them.
@@ -13415,7 +13159,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
     hpux*)
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -13441,6 +13185,16 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic_F77='-qnocommon'
+         lt_prog_compiler_wl_F77='-Wl,'
+         ;;
+       esac
+       ;;
 
     mingw* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
@@ -13452,7 +13206,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_wl_F77='-Wl,'
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -13476,12 +13230,19 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       ;;
 
     linux*)
-      case $CC in
+      case $cc_basename in
       icc* | ecc*)
 	lt_prog_compiler_wl_F77='-Wl,'
 	lt_prog_compiler_pic_F77='-KPIC'
 	lt_prog_compiler_static_F77='-static'
         ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-fpic'
+	lt_prog_compiler_static_F77='-Bstatic'
+        ;;
       ccc*)
         lt_prog_compiler_wl_F77='-Wl,'
         # All Alpha code is PIC.
@@ -13496,15 +13257,15 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static_F77='-non_shared'
       ;;
 
-    sco3.2v5*)
-      lt_prog_compiler_pic_F77='-Kpic'
-      lt_prog_compiler_static_F77='-dn'
-      ;;
-
     solaris*)
-      lt_prog_compiler_wl_F77='-Wl,'
       lt_prog_compiler_pic_F77='-KPIC'
       lt_prog_compiler_static_F77='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl_F77='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_F77='-Wl,';;
+      esac
       ;;
 
     sunos4*)
@@ -13513,7 +13274,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static_F77='-Bstatic'
       ;;
 
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    sysv4 | sysv4.2uw2* | sysv4.3*)
       lt_prog_compiler_wl_F77='-Wl,'
       lt_prog_compiler_pic_F77='-KPIC'
       lt_prog_compiler_static_F77='-Bstatic'
@@ -13526,6 +13287,17 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       fi
       ;;
 
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
+
     uts4*)
       lt_prog_compiler_pic_F77='-pic'
       lt_prog_compiler_static_F77='-Bstatic'
@@ -13560,18 +13332,20 @@ else
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13566: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:13338: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:13570: \$? = $ac_status" >&5
+   echo "$as_me:13342: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_prog_compiler_pic_works_F77=yes
      fi
    fi
@@ -13592,7 +13366,7 @@ else
 fi
 
 fi
-case "$host_os" in
+case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic_F77=
@@ -13602,6 +13376,48 @@ case "$host_os" in
     ;;
 esac
 
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works_F77=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works_F77=yes
+       fi
+     else
+       lt_prog_compiler_static_works_F77=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6
+
+if test x"$lt_prog_compiler_static_works_F77" = xyes; then
+    :
+else
+    lt_prog_compiler_static_F77=
+fi
+
+
 echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
 if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
@@ -13620,23 +13436,25 @@ else
    # Note that $ac_compile itself does not contain backslashes and begins
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13626: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:13442: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:13630: \$? = $ac_status" >&5
+   echo "$as_me:13446: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     if test ! -s out/conftest.err; then
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o_F77=yes
      fi
    fi
-   chmod u+w .
+   chmod u+w . 2>&5
    $rm conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
@@ -13712,6 +13530,16 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
   extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
   case $host_os in
   cygwin* | mingw* | pw32*)
@@ -13722,6 +13550,10 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
       with_gnu_ld=no
     fi
     ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
   openbsd*)
     with_gnu_ld=no
     ;;
@@ -13732,6 +13564,27 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec_F77=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
     # See if GNU ld supports shared libraries.
     case $host_os in
     aix3* | aix4* | aix5*)
@@ -13782,10 +13635,10 @@ EOF
       allow_undefined_flag_F77=unsupported
       always_export_symbols_F77=no
       enable_shared_with_static_runtimes_F77=yes
-      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
 
       if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
 	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
@@ -13794,9 +13647,55 @@ EOF
 	  echo EXPORTS > $output_objdir/$soname.def;
 	  cat $export_symbols >> $output_objdir/$soname.def;
 	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
-	ld_shlibs=no
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    interix3*)
+      hardcode_direct_F77=no
+      hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_F77='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    linux*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+      else
+	ld_shlibs_F77=no
       fi
       ;;
 
@@ -13810,7 +13709,7 @@ EOF
       fi
       ;;
 
-    solaris* | sysv5*)
+    solaris*)
       if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
 	ld_shlibs_F77=no
 	cat <<EOF 1>&2
@@ -13831,6 +13730,33 @@ EOF
       fi
       ;;
 
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_F77=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs_F77=no
+	  fi
+	;;
+      esac
+      ;;
+
     sunos4*)
       archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       wlarc=
@@ -13838,31 +13764,6 @@ EOF
       hardcode_shlibpath_var_F77=no
       ;;
 
-  linux*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_cmds_F77="$tmp_archive_cmds"
-      supports_anon_versioning=no
-      case `$LD -v 2>/dev/null` in
-        *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-        *\ 2.11.*) ;; # other 2.11 versions
-        *) supports_anon_versioning=yes ;;
-      esac
-      if test $supports_anon_versioning = yes; then
-        archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
-        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-      else
-        archive_expsym_cmds_F77="$tmp_archive_cmds"
-      fi
-    else
-      ld_shlibs_F77=no
-    fi
-    ;;
-
     *)
       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
 	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
@@ -13873,16 +13774,11 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       ;;
     esac
 
-    if test "$ld_shlibs_F77" = yes; then
-      runpath_var=LD_RUN_PATH
-      hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
-      export_dynamic_flag_spec_F77='${wl}--export-dynamic'
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- 	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_F77=
-      fi
+    if test "$ld_shlibs_F77" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_F77=
+      export_dynamic_flag_spec_F77=
+      whole_archive_flag_spec_F77=
     fi
   else
     # PORTME fill in a description of your system's linker (not GNU ld)
@@ -13894,7 +13790,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       hardcode_minus_L_F77=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	hardcode_direct_F77=unsupported
@@ -13928,6 +13824,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
   	    break
   	  fi
 	  done
+	  ;;
 	esac
 
 	exp_sym_flag='-bexport'
@@ -13946,7 +13843,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       link_all_deplibs_F77=yes
 
       if test "$GCC" = yes; then
-	case $host_os in aix4.012|aix4.012.*)
+	case $host_os in aix4.[012]|aix4.[012].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
@@ -13965,8 +13862,12 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
   	  hardcode_libdir_flag_spec_F77='-L$libdir'
   	  hardcode_libdir_separator_F77=
 	  fi
+	  ;;
 	esac
 	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
@@ -13974,11 +13875,11 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
   	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-  	if test "$aix_use_runtimelinking" = yes; then
+	  if test "$aix_use_runtimelinking" = yes; then
 	    shared_flag='${wl}-G'
 	  else
 	    shared_flag='${wl}-bM:SRE'
-  	fi
+	  fi
 	fi
       fi
 
@@ -14033,12 +13934,12 @@ rm -f conftest.err conftest.$ac_objext \
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
        hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
        else
 	if test "$host_cpu" = ia64; then
 	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag_F77="-z nodefs"
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an empty executable.
 	 cat >conftest.$ac_ext <<_ACEOF
@@ -14088,13 +13989,11 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  # -berok will link without error, but may produce a broken library.
 	  no_undefined_flag_F77=' ${wl}-bernotok'
 	  allow_undefined_flag_F77=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  always_export_symbols_F77=yes
 	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_F77=' '
+	  whole_archive_flag_spec_F77='$convenience'
 	  archive_cmds_need_lc_F77=yes
-	  # This is similar to how AIX traditionally builds it's shared libraries.
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 	fi
       fi
       ;;
@@ -14107,7 +14006,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ld_shlibs_F77=no
       ;;
 
-    bsdi4*)
+    bsdi[45]*)
       export_dynamic_flag_spec_F77=-rdynamic
       ;;
 
@@ -14128,57 +14027,57 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       old_archive_From_new_cmds_F77='true'
       # FIXME: Should let the user specify the lib program.
       old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
       enable_shared_with_static_runtimes_F77=yes
       ;;
 
     darwin* | rhapsody*)
-    if test "$GXX" = yes ; then
-      archive_cmds_need_lc_F77=no
-      case "$host_os" in
-      rhapsody* | darwin1.[012])
-	allow_undefined_flag_F77='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	allow_undefined_flag_F77='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[012])
-            allow_undefined_flag_F77='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            allow_undefined_flag_F77='-undefined dynamic_lookup'
-            ;;
-        esac
-      fi
-	;;
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
       esac
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  archive_cmds_F77='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        archive_cmds_F77='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      fi
-      module_cmds_F77='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-          archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        else
-          archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        fi
-          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      archive_cmds_need_lc_F77=no
       hardcode_direct_F77=no
       hardcode_automatic_F77=yes
       hardcode_shlibpath_var_F77=unsupported
-      whole_archive_flag_spec_F77='-all_load $convenience'
+      whole_archive_flag_spec_F77=''
       link_all_deplibs_F77=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
     else
-      ld_shlibs_F77=no
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_F77=no
+          ;;
+      esac
     fi
       ;;
 
@@ -14212,7 +14111,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu)
+    freebsd* | kfreebsd*-gnu | dragonfly*)
       archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec_F77='-R$libdir'
       hardcode_direct_F77=yes
@@ -14235,47 +14134,62 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       export_dynamic_flag_spec_F77='${wl}-E'
       ;;
 
-    hpux10* | hpux11*)
+    hpux10*)
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*|ia64*)
+	archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
+
+	hardcode_direct_F77=yes
+	export_dynamic_flag_spec_F77='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_F77=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
 	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
 	*)
 	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
-	case "$host_cpu" in
-	hppa*64*|ia64*)
-	  archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
       if test "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*)
-	  hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-	  hardcode_libdir_separator_F77=:
-	  hardcode_direct_F77=no
-	  hardcode_shlibpath_var_F77=no
-	  ;;
-	ia64*)
-	  hardcode_libdir_flag_spec_F77='-L$libdir'
-	  hardcode_direct_F77=no
-	  hardcode_shlibpath_var_F77=no
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_F77=yes
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
+	  hardcode_direct_F77=no
+	  hardcode_shlibpath_var_F77=no
 	  ;;
 	*)
-	  hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	  hardcode_libdir_separator_F77=:
 	  hardcode_direct_F77=yes
 	  export_dynamic_flag_spec_F77='${wl}-E'
 
@@ -14323,6 +14237,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var_F77=no
       if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
 	archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
 	hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
 	export_dynamic_flag_spec_F77='${wl}-E'
       else
@@ -14368,7 +14283,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	allow_undefined_flag_F77=' -expect_unresolved \*'
 	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec_F77='-rpath $libdir'
@@ -14376,21 +14291,15 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_libdir_separator_F77=:
       ;;
 
-    sco3.2v5*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_F77=no
-      export_dynamic_flag_spec_F77='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
     solaris*)
       no_undefined_flag_F77=' -z text'
       if test "$GCC" = yes; then
+	wlarc='${wl}'
 	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
 	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
       else
+	wlarc=''
 	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
   	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
@@ -14399,8 +14308,18 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var_F77=no
       case $host_os in
       solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
+      *)
+ 	# The compiler driver will combine linker options so we
+ 	# cannot just pass the convience library names through
+ 	# without $wl, iff we do not link with $LD.
+ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+ 	case $wlarc in
+ 	'')
+ 	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
+ 	*)
+ 	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	esac ;;
       esac
       link_all_deplibs_F77=yes
       ;;
@@ -14457,36 +14376,45 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       fi
       ;;
 
-    sysv4.2uw2*)
-      archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_F77=yes
-      hardcode_minus_L_F77=no
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+      no_undefined_flag_F77='${wl}-z,text'
+      archive_cmds_need_lc_F77=no
       hardcode_shlibpath_var_F77=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
+      runpath_var='LD_RUN_PATH'
 
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[78]* | unixware7*)
-      no_undefined_flag_F77='${wl}-z ${wl}text'
       if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds_F77='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_F77=no
       ;;
 
-    sysv5*)
-      no_undefined_flag_F77=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      hardcode_libdir_flag_spec_F77=
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_F77='${wl}-z,text'
+      allow_undefined_flag_F77='${wl}-z,nodefs'
+      archive_cmds_need_lc_F77=no
       hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator_F77=':'
+      link_all_deplibs_F77=yes
+      export_dynamic_flag_spec_F77='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
       ;;
 
     uts4*)
@@ -14505,11 +14433,6 @@ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
 echo "${ECHO_T}$ld_shlibs_F77" >&6
 test "$ld_shlibs_F77" = no && can_build_shared=no
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
 #
 # Do we need to explicitly link libc?
 #
@@ -14542,6 +14465,7 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
         libobjs=conftest.$ac_objext
         deplibs=
         wl=$lt_prog_compiler_wl_F77
+	pic_flag=$lt_prog_compiler_pic_F77
         compiler_flags=-v
         linker_flags=-v
         verstring=
@@ -14674,7 +14598,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[45]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -14702,7 +14626,8 @@ cygwin* | mingw* | pw32*)
       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $rm \$dlpath'
@@ -14732,7 +14657,7 @@ cygwin* | mingw* | pw32*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
     ;;
@@ -14755,7 +14680,7 @@ darwin* | rhapsody*)
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
   # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
   if test "$GCC" = yes; then
     sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -14790,8 +14715,17 @@ kfreebsd*-gnu)
   dynamic_linker='GNU ld.so'
   ;;
 
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
@@ -14809,14 +14743,19 @@ freebsd*)
   freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
-  freebsd3.01* | freebsdelf3.01*)
+  freebsd3.[01]* | freebsdelf3.[01]*)
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
-  *) # from 3.2 on
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
   esac
   ;;
 
@@ -14836,7 +14775,7 @@ hpux9* | hpux10* | hpux11*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
     shrext_cmds='.so'
     hardcode_into_libs=yes
@@ -14876,6 +14815,18 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
@@ -14933,31 +14884,10 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 14940 "configure"' > conftest.$ac_ext
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
-
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -15018,8 +14948,13 @@ nto-qnx*)
 
 openbsd*)
   version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
   need_lib_prefix=no
-  need_version=yes
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -15057,13 +14992,6 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
 solaris*)
   version_type=linux
   need_lib_prefix=no
@@ -15089,7 +15017,7 @@ sunos4*)
   need_version=yes
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -15122,6 +15050,29 @@ sysv4*MP*)
   fi
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -15137,12 +15088,17 @@ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
 echo "${ECHO_T}$dynamic_linker" >&6
 test "$dynamic_linker" = no && can_build_shared=no
 
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
 echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
 hardcode_action_F77=
 if test -n "$hardcode_libdir_flag_spec_F77" || \
-   test -n "$runpath_var F77" || \
-   test "X$hardcode_automatic_F77"="Xyes" ; then
+   test -n "$runpath_var_F77" || \
+   test "X$hardcode_automatic_F77" = "Xyes" ; then
 
   # We can hardcode non-existant directories.
   if test "$hardcode_direct_F77" != no &&
@@ -15174,36 +15130,6 @@ elif test "$shlibpath_overrides_runpath" = yes ||
   enable_fast_install=needless
 fi
 
-striplib=
-old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-       else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-       ;;
-   *)
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-    ;;
-  esac
-fi
-
-
 
 # The else clause should only fire when bootstrapping the
 # libtool distribution, otherwise you forgot to ship ltmain.sh
@@ -15218,7 +15144,7 @@ if test -f "$ltmain"; then
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
     SED SHELL STRIP \
     libname_spec library_names_spec soname_spec extract_expsyms_cmds \
     old_striplib striplib file_magic_cmd finish_cmds finish_eval \
@@ -15319,6 +15245,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -15330,6 +15262,9 @@ AR_FLAGS=$lt_AR_FLAGS
 # A C compiler.
 LTCC=$lt_LTCC
 
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
 # A language-specific compiler.
 CC=$lt_compiler_F77
 
@@ -15395,7 +15330,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
 
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
 # Do we need the lib prefix for modules?
@@ -15633,26 +15568,55 @@ objext_GCJ=$objext
 lt_simple_compile_test_code="class foo {}\n"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String argv) {}; }\n'
+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
 
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
 CC=${GCJ-"gcj"}
 compiler=$CC
 compiler_GCJ=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
 
 # GCJ did not exist at the time GCC didn't implicitly link libc in.
 archive_cmds_need_lc_GCJ=no
 
+old_archive_cmds_GCJ=$old_archive_cmds
+
 
 lt_prog_compiler_no_builtin_flag_GCJ=
 
@@ -15675,18 +15639,20 @@ else
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:15681: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:15645: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:15685: \$? = $ac_status" >&5
+   echo "$as_me:15649: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_rtti_exceptions=yes
      fi
    fi
@@ -15747,6 +15713,11 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_pic_GCJ='-fno-common'
       ;;
 
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
     msdosdjgpp*)
       # Just because we use GCC doesn't mean we suddenly get shared libraries
       # on systems that don't support them.
@@ -15763,7 +15734,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
     hpux*)
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -15789,6 +15760,16 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic_GCJ='-qnocommon'
+         lt_prog_compiler_wl_GCJ='-Wl,'
+         ;;
+       esac
+       ;;
 
     mingw* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
@@ -15800,7 +15781,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_wl_GCJ='-Wl,'
       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
       # not for PA HP-UX.
-      case "$host_cpu" in
+      case $host_cpu in
       hppa*64*|ia64*)
 	# +Z the default
 	;;
@@ -15824,12 +15805,19 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       ;;
 
     linux*)
-      case $CC in
+      case $cc_basename in
       icc* | ecc*)
 	lt_prog_compiler_wl_GCJ='-Wl,'
 	lt_prog_compiler_pic_GCJ='-KPIC'
 	lt_prog_compiler_static_GCJ='-static'
         ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-fpic'
+	lt_prog_compiler_static_GCJ='-Bstatic'
+        ;;
       ccc*)
         lt_prog_compiler_wl_GCJ='-Wl,'
         # All Alpha code is PIC.
@@ -15844,15 +15832,15 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static_GCJ='-non_shared'
       ;;
 
-    sco3.2v5*)
-      lt_prog_compiler_pic_GCJ='-Kpic'
-      lt_prog_compiler_static_GCJ='-dn'
-      ;;
-
     solaris*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
       lt_prog_compiler_pic_GCJ='-KPIC'
       lt_prog_compiler_static_GCJ='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_GCJ='-Wl,';;
+      esac
       ;;
 
     sunos4*)
@@ -15861,7 +15849,7 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       lt_prog_compiler_static_GCJ='-Bstatic'
       ;;
 
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    sysv4 | sysv4.2uw2* | sysv4.3*)
       lt_prog_compiler_wl_GCJ='-Wl,'
       lt_prog_compiler_pic_GCJ='-KPIC'
       lt_prog_compiler_static_GCJ='-Bstatic'
@@ -15874,6 +15862,17 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
       fi
       ;;
 
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_can_build_shared_GCJ=no
+      ;;
+
     uts4*)
       lt_prog_compiler_pic_GCJ='-pic'
       lt_prog_compiler_static_GCJ='-Bstatic'
@@ -15908,18 +15907,20 @@ else
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    # The option is referenced via a variable to avoid confusing sed.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:15914: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:15913: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:15918: \$? = $ac_status" >&5
+   echo "$as_me:15917: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test ! -s conftest.err; then
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_prog_compiler_pic_works_GCJ=yes
      fi
    fi
@@ -15940,7 +15941,7 @@ else
 fi
 
 fi
-case "$host_os" in
+case $host_os in
   # For platforms which do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic_GCJ=
@@ -15950,6 +15951,48 @@ case "$host_os" in
     ;;
 esac
 
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works_GCJ=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works_GCJ=yes
+       fi
+     else
+       lt_prog_compiler_static_works_GCJ=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6
+
+if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
+    :
+else
+    lt_prog_compiler_static_GCJ=
+fi
+
+
 echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
 if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
@@ -15968,23 +16011,25 @@ else
    # Note that $ac_compile itself does not contain backslashes and begins
    # with a dollar sign (not a hyphen), so the echo should work correctly.
    lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:15974: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:16017: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:15978: \$? = $ac_status" >&5
+   echo "$as_me:16021: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     if test ! -s out/conftest.err; then
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o_GCJ=yes
      fi
    fi
-   chmod u+w .
+   chmod u+w . 2>&5
    $rm conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
@@ -16060,6 +16105,16 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
   extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
   case $host_os in
   cygwin* | mingw* | pw32*)
@@ -16070,6 +16125,10 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
       with_gnu_ld=no
     fi
     ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
   openbsd*)
     with_gnu_ld=no
     ;;
@@ -16080,6 +16139,27 @@ echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared librar
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec_GCJ=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
     # See if GNU ld supports shared libraries.
     case $host_os in
     aix3* | aix4* | aix5*)
@@ -16130,10 +16210,10 @@ EOF
       allow_undefined_flag_GCJ=unsupported
       always_export_symbols_GCJ=no
       enable_shared_with_static_runtimes_GCJ=yes
-      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
 
       if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	# If the export-symbols file already is a .def file (1st line
 	# is EXPORTS), use it as is; otherwise, prepend...
 	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
@@ -16142,9 +16222,55 @@ EOF
 	  echo EXPORTS > $output_objdir/$soname.def;
 	  cat $export_symbols >> $output_objdir/$soname.def;
 	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
-	ld_shlibs=no
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    interix3*)
+      hardcode_direct_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_GCJ='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    linux*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+      else
+	ld_shlibs_GCJ=no
       fi
       ;;
 
@@ -16158,7 +16284,7 @@ EOF
       fi
       ;;
 
-    solaris* | sysv5*)
+    solaris*)
       if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
 	ld_shlibs_GCJ=no
 	cat <<EOF 1>&2
@@ -16179,6 +16305,33 @@ EOF
       fi
       ;;
 
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_GCJ=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs_GCJ=no
+	  fi
+	;;
+      esac
+      ;;
+
     sunos4*)
       archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       wlarc=
@@ -16186,31 +16339,6 @@ EOF
       hardcode_shlibpath_var_GCJ=no
       ;;
 
-  linux*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_cmds_GCJ="$tmp_archive_cmds"
-      supports_anon_versioning=no
-      case `$LD -v 2>/dev/null` in
-        *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-        *\ 2.11.*) ;; # other 2.11 versions
-        *) supports_anon_versioning=yes ;;
-      esac
-      if test $supports_anon_versioning = yes; then
-        archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
-        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-      else
-        archive_expsym_cmds_GCJ="$tmp_archive_cmds"
-      fi
-    else
-      ld_shlibs_GCJ=no
-    fi
-    ;;
-
     *)
       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
 	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
@@ -16221,16 +16349,11 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       ;;
     esac
 
-    if test "$ld_shlibs_GCJ" = yes; then
-      runpath_var=LD_RUN_PATH
-      hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
-      export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- 	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_GCJ=
-      fi
+    if test "$ld_shlibs_GCJ" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_GCJ=
+      export_dynamic_flag_spec_GCJ=
+      whole_archive_flag_spec_GCJ=
     fi
   else
     # PORTME fill in a description of your system's linker (not GNU ld)
@@ -16242,7 +16365,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       hardcode_minus_L_GCJ=yes
-      if test "$GCC" = yes && test -z "$link_static_flag"; then
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	hardcode_direct_GCJ=unsupported
@@ -16276,6 +16399,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
   	    break
   	  fi
 	  done
+	  ;;
 	esac
 
 	exp_sym_flag='-bexport'
@@ -16294,7 +16418,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       link_all_deplibs_GCJ=yes
 
       if test "$GCC" = yes; then
-	case $host_os in aix4.012|aix4.012.*)
+	case $host_os in aix4.[012]|aix4.[012].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
@@ -16313,8 +16437,12 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
   	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
   	  hardcode_libdir_separator_GCJ=
 	  fi
+	  ;;
 	esac
 	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
@@ -16322,11 +16450,11 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
   	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-  	if test "$aix_use_runtimelinking" = yes; then
+	  if test "$aix_use_runtimelinking" = yes; then
 	    shared_flag='${wl}-G'
 	  else
 	    shared_flag='${wl}-bM:SRE'
-  	fi
+	  fi
 	fi
       fi
 
@@ -16391,12 +16519,12 @@ rm -f conftest.err conftest.$ac_objext \
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
        hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
        else
 	if test "$host_cpu" = ia64; then
 	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag_GCJ="-z nodefs"
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an empty executable.
 	 cat >conftest.$ac_ext <<_ACEOF
@@ -16456,13 +16584,11 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  # -berok will link without error, but may produce a broken library.
 	  no_undefined_flag_GCJ=' ${wl}-bernotok'
 	  allow_undefined_flag_GCJ=' ${wl}-berok'
-	  # -bexpall does not export symbols beginning with underscore (_)
-	  always_export_symbols_GCJ=yes
 	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_GCJ=' '
+	  whole_archive_flag_spec_GCJ='$convenience'
 	  archive_cmds_need_lc_GCJ=yes
-	  # This is similar to how AIX traditionally builds it's shared libraries.
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 	fi
       fi
       ;;
@@ -16475,7 +16601,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ld_shlibs_GCJ=no
       ;;
 
-    bsdi4*)
+    bsdi[45]*)
       export_dynamic_flag_spec_GCJ=-rdynamic
       ;;
 
@@ -16496,57 +16622,57 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       old_archive_From_new_cmds_GCJ='true'
       # FIXME: Should let the user specify the lib program.
       old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
       enable_shared_with_static_runtimes_GCJ=yes
       ;;
 
     darwin* | rhapsody*)
-    if test "$GXX" = yes ; then
-      archive_cmds_need_lc_GCJ=no
-      case "$host_os" in
-      rhapsody* | darwin1.[012])
-	allow_undefined_flag_GCJ='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	allow_undefined_flag_GCJ='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[012])
-            allow_undefined_flag_GCJ='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            allow_undefined_flag_GCJ='-undefined dynamic_lookup'
-            ;;
-        esac
-      fi
-	;;
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
       esac
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  archive_cmds_GCJ='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        archive_cmds_GCJ='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      fi
-      module_cmds_GCJ='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-          archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        else
-          archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        fi
-          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      archive_cmds_need_lc_GCJ=no
       hardcode_direct_GCJ=no
       hardcode_automatic_GCJ=yes
       hardcode_shlibpath_var_GCJ=unsupported
-      whole_archive_flag_spec_GCJ='-all_load $convenience'
+      whole_archive_flag_spec_GCJ=''
       link_all_deplibs_GCJ=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
     else
-      ld_shlibs_GCJ=no
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_GCJ=no
+          ;;
+      esac
     fi
       ;;
 
@@ -16580,7 +16706,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu)
+    freebsd* | kfreebsd*-gnu | dragonfly*)
       archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec_GCJ='-R$libdir'
       hardcode_direct_GCJ=yes
@@ -16603,47 +16729,62 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       export_dynamic_flag_spec_GCJ='${wl}-E'
       ;;
 
-    hpux10* | hpux11*)
+    hpux10*)
       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*|ia64*)
+	archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GCJ=:
+
+	hardcode_direct_GCJ=yes
+	export_dynamic_flag_spec_GCJ='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_GCJ=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
 	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
+	ia64*)
+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
 	*)
 	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
-	case "$host_cpu" in
-	hppa*64*|ia64*)
-	  archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
       if test "$with_gnu_ld" = no; then
-	case "$host_cpu" in
-	hppa*64*)
-	  hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-	  hardcode_libdir_separator_GCJ=:
-	  hardcode_direct_GCJ=no
-	  hardcode_shlibpath_var_GCJ=no
-	  ;;
-	ia64*)
-	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
-	  hardcode_direct_GCJ=no
-	  hardcode_shlibpath_var_GCJ=no
+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GCJ=:
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_GCJ=yes
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
+	  hardcode_direct_GCJ=no
+	  hardcode_shlibpath_var_GCJ=no
 	  ;;
 	*)
-	  hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	  hardcode_libdir_separator_GCJ=:
 	  hardcode_direct_GCJ=yes
 	  export_dynamic_flag_spec_GCJ='${wl}-E'
 
@@ -16691,6 +16832,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var_GCJ=no
       if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
 	archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
 	hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
 	export_dynamic_flag_spec_GCJ='${wl}-E'
       else
@@ -16736,7 +16878,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	allow_undefined_flag_GCJ=' -expect_unresolved \*'
 	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
 	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
@@ -16744,21 +16886,15 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_libdir_separator_GCJ=:
       ;;
 
-    sco3.2v5*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_GCJ=no
-      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ;;
-
     solaris*)
       no_undefined_flag_GCJ=' -z text'
       if test "$GCC" = yes; then
+	wlarc='${wl}'
 	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
 	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
       else
+	wlarc=''
 	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
   	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
@@ -16767,8 +16903,18 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var_GCJ=no
       case $host_os in
       solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
+      *)
+ 	# The compiler driver will combine linker options so we
+ 	# cannot just pass the convience library names through
+ 	# without $wl, iff we do not link with $LD.
+ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+ 	case $wlarc in
+ 	'')
+ 	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
+ 	*)
+ 	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	esac ;;
       esac
       link_all_deplibs_GCJ=yes
       ;;
@@ -16825,36 +16971,45 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       fi
       ;;
 
-    sysv4.2uw2*)
-      archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=no
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+      no_undefined_flag_GCJ='${wl}-z,text'
+      archive_cmds_need_lc_GCJ=no
       hardcode_shlibpath_var_GCJ=no
-      hardcode_runpath_var=yes
-      runpath_var=LD_RUN_PATH
-      ;;
+      runpath_var='LD_RUN_PATH'
 
-   sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[78]* | unixware7*)
-      no_undefined_flag_GCJ='${wl}-z ${wl}text'
       if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_GCJ=no
       ;;
 
-    sysv5*)
-      no_undefined_flag_GCJ=' -z text'
-      # $CC -shared without GNU ld will not create a library from C++
-      # object files and a static libstdc++, better avoid it by now
-      archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      hardcode_libdir_flag_spec_GCJ=
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_GCJ='${wl}-z,text'
+      allow_undefined_flag_GCJ='${wl}-z,nodefs'
+      archive_cmds_need_lc_GCJ=no
       hardcode_shlibpath_var_GCJ=no
+      hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator_GCJ=':'
+      link_all_deplibs_GCJ=yes
+      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
       runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
       ;;
 
     uts4*)
@@ -16873,11 +17028,6 @@ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
 echo "${ECHO_T}$ld_shlibs_GCJ" >&6
 test "$ld_shlibs_GCJ" = no && can_build_shared=no
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
 #
 # Do we need to explicitly link libc?
 #
@@ -16910,6 +17060,7 @@ echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&
         libobjs=conftest.$ac_objext
         deplibs=
         wl=$lt_prog_compiler_wl_GCJ
+	pic_flag=$lt_prog_compiler_pic_GCJ
         compiler_flags=-v
         linker_flags=-v
         verstring=
@@ -17042,7 +17193,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[45]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -17070,7 +17221,8 @@ cygwin* | mingw* | pw32*)
       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname'
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
        $rm \$dlpath'
@@ -17100,7 +17252,7 @@ cygwin* | mingw* | pw32*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
     ;;
@@ -17123,7 +17275,7 @@ darwin* | rhapsody*)
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
   # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
   if test "$GCC" = yes; then
     sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -17158,8 +17310,17 @@ kfreebsd*-gnu)
   dynamic_linker='GNU ld.so'
   ;;
 
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
@@ -17177,14 +17338,19 @@ freebsd*)
   freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
-  freebsd3.01* | freebsdelf3.01*)
+  freebsd3.[01]* | freebsdelf3.[01]*)
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
-  *) # from 3.2 on
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
   esac
   ;;
 
@@ -17204,7 +17370,7 @@ hpux9* | hpux10* | hpux11*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  case "$host_cpu" in
+  case $host_cpu in
   ia64*)
     shrext_cmds='.so'
     hardcode_into_libs=yes
@@ -17244,6 +17410,18 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
 irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
@@ -17301,31 +17479,10 @@ linux*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 17308 "configure"' > conftest.$ac_ext
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
-
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -17386,8 +17543,13 @@ nto-qnx*)
 
 openbsd*)
   version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
   need_lib_prefix=no
-  need_version=yes
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -17425,13 +17587,6 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
 solaris*)
   version_type=linux
   need_lib_prefix=no
@@ -17457,7 +17612,7 @@ sunos4*)
   need_version=yes
   ;;
 
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -17490,6 +17645,29 @@ sysv4*MP*)
   fi
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
 uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -17505,12 +17683,17 @@ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
 echo "${ECHO_T}$dynamic_linker" >&6
 test "$dynamic_linker" = no && can_build_shared=no
 
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
 echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
 hardcode_action_GCJ=
 if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-   test -n "$runpath_var GCJ" || \
-   test "X$hardcode_automatic_GCJ"="Xyes" ; then
+   test -n "$runpath_var_GCJ" || \
+   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
 
   # We can hardcode non-existant directories.
   if test "$hardcode_direct_GCJ" != no &&
@@ -17542,841 +17725,6 @@ elif test "$shlibpath_overrides_runpath" = yes ||
   enable_fast_install=needless
 fi
 
-striplib=
-old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-       else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-       ;;
-   *)
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-    ;;
-  esac
-fi
-
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-   ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-
-fi
-
-   ;;
-
-  *)
-    echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
-if test "${ac_cv_func_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define shl_load innocuous_shl_load
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef shl_load
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
-choke me
-#else
-char (*f) () = shl_load;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != shl_load;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_shl_load=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6
-if test $ac_cv_func_shl_load = yes; then
-  lt_cv_dlopen="shl_load"
-else
-  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char shl_load ();
-int
-main ()
-{
-shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_shl_load=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_shl_load=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
-if test $ac_cv_lib_dld_shl_load = yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-else
-  echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
-if test "${ac_cv_func_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define dlopen innocuous_dlopen
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef dlopen
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
-choke me
-#else
-char (*f) () = dlopen;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != dlopen;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6
-if test $ac_cv_func_dlopen = yes; then
-  lt_cv_dlopen="dlopen"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_svld_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_svld_dlopen=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
-if test $ac_cv_lib_svld_dlopen = yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
-  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dld_link ();
-int
-main ()
-{
-dld_link ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dld_dld_link=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dld_dld_link=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
-if test $ac_cv_lib_dld_dld_link = yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 18179 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
-if test "${lt_cv_dlopen_self_static+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self_static=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 18277 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self_static=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-
 
 # The else clause should only fire when bootstrapping the
 # libtool distribution, otherwise you forgot to ship ltmain.sh
@@ -18391,7 +17739,7 @@ if test -f "$ltmain"; then
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
     SED SHELL STRIP \
     libname_spec library_names_spec soname_spec extract_expsyms_cmds \
     old_striplib striplib file_magic_cmd finish_cmds finish_eval \
@@ -18492,6 +17840,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -18503,6 +17857,9 @@ AR_FLAGS=$lt_AR_FLAGS
 # A C compiler.
 LTCC=$lt_LTCC
 
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
 # A language-specific compiler.
 CC=$lt_compiler_GCJ
 
@@ -18568,7 +17925,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
 
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
 # Do we need the lib prefix for modules?
@@ -18812,15 +18169,42 @@ lt_simple_link_test_code="$lt_simple_compile_test_code"
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
 # Allow CC to be a program name with arguments.
 compiler=$CC
 
 
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
 CC=${RC-"windres"}
 compiler=$CC
 compiler_RC=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
 lt_cv_prog_compiler_c_o_RC=yes
 
 # The else clause should only fire when bootstrapping the
@@ -18836,7 +18220,7 @@ if test -f "$ltmain"; then
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
     SED SHELL STRIP \
     libname_spec library_names_spec soname_spec extract_expsyms_cmds \
     old_striplib striplib file_magic_cmd finish_cmds finish_eval \
@@ -18937,6 +18321,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -18948,6 +18338,9 @@ AR_FLAGS=$lt_AR_FLAGS
 # A C compiler.
 LTCC=$lt_LTCC
 
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
 # A language-specific compiler.
 CC=$lt_compiler_RC
 
@@ -19013,7 +18406,7 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
 
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
 # Do we need the lib prefix for modules?
@@ -19288,6 +18681,1395 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 
 
 
+
+#Check for compiler vendor
+
+echo "$as_me:$LINENO: checking for C compiler vendor" >&5
+echo $ECHO_N "checking for C compiler vendor... $ECHO_C" >&6
+if test "${ax_cv_c_compiler_vendor+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ax_cv_c_compiler_vendor=unknown
+  # note: don't check for gcc first since some other compilers define __GNUC__
+  for ventest in intel:__ICC,__ECC,__INTEL_COMPILER ibm:__xlc__,__xlC__,__IBMC__,__IBMCPP__ gnu:__GNUC__ sun:__SUNPRO_C,__SUNPRO_CC hp:__HP_cc,__HP_aCC dec:__DECC,__DECCXX,__DECC_VER,__DECCXX_VER borland:__BORLANDC__,__TURBOC__ comeau:__COMO__ cray:_CRAYC kai:__KCC lcc:__LCC__ metrowerks:__MWERKS__ sgi:__sgi,sgi microsoft:_MSC_VER watcom:__WATCOMC__ portland:__PGI; do
+    vencpp="defined("`echo $ventest | cut -d: -f2 | sed 's/,/) || defined(/g'`")"
+    cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+#if !($vencpp)
+      thisisanerror;
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ax_cv_c_compiler_vendor=`echo $ventest | cut -d: -f1`; break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+
+fi
+echo "$as_me:$LINENO: result: $ax_cv_c_compiler_vendor" >&5
+echo "${ECHO_T}$ax_cv_c_compiler_vendor" >&6
+
+
+#  Optimize
+# Check whether --enable-optimization or --disable-optimization was given.
+if test "${enable_optimization+set}" = set; then
+  enableval="$enable_optimization"
+  enable_optimizer="$enableval"
+else
+  enable_optimizer="no"
+fi;
+
+if test "${enable_optimizer}" = "yes" ; then
+
+cat >>confdefs.h <<\_ACEOF
+#define OPTIMZER
+_ACEOF
+
+
+
+
+
+# Check whether --enable-portable-binary or --disable-portable-binary was given.
+if test "${enable_portable_binary+set}" = set; then
+  enableval="$enable_portable_binary"
+  acx_maxopt_portable=$withval
+else
+  acx_maxopt_portable=no
+fi;
+
+# Try to determine "good" native compiler flags if none specified via CFLAGS
+if test "$ac_test_CFLAGS" != "set"; then
+  CFLAGS=""
+  case $ax_cv_c_compiler_vendor in
+    dec) CFLAGS="-newc -w0 -O5 -ansi_alias -ansi_args -fp_reorder -tune host"
+         if test "x$acx_maxopt_portable" = xno; then
+           CFLAGS="$CFLAGS -arch host"
+         fi;;
+
+    sun) CFLAGS="-native -fast -xO5 -dalign -xc99=all"
+         if test "x$acx_maxopt_portable" = xyes; then
+           CFLAGS="$CFLAGS -xarch=generic"
+         fi;;
+
+    hp)  CFLAGS="+Oall +Optrs_ansi +DSnative"
+         if test "x$acx_maxopt_portable" = xyes; then
+           CFLAGS="$CFLAGS +DAportable"
+         fi;;
+
+    ibm) if test "x$acx_maxopt_portable" = xno; then
+           xlc_opt="-qarch=auto -qtune=auto"
+         else
+           xlc_opt="-qtune=auto"
+         fi
+          echo "$as_me:$LINENO: checking whether C compiler accepts $xlc_opt" >&5
+echo $ECHO_N "checking whether C compiler accepts $xlc_opt... $ECHO_C" >&6
+ax_save_FLAGS=$CFLAGS
+   CFLAGS="$xlc_opt"
+   cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  eval `echo "ax_cv_c_flags_$xlc_opt" | $as_tr_sh`=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval `echo "ax_cv_c_flags_$xlc_opt" | $as_tr_sh`=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+   CFLAGS=$ax_save_FLAGS
+eval ax_check_compiler_flags=$`echo "ax_cv_c_flags_$xlc_opt" | $as_tr_sh`
+echo "$as_me:$LINENO: result: $ax_check_compiler_flags" >&5
+echo "${ECHO_T}$ax_check_compiler_flags" >&6
+if test "x$ax_check_compiler_flags" = xyes; then
+        CFLAGS="-O3 -qansialias -w $xlc_opt"
+else
+        CFLAGS="-O3 -qansialias -w"
+                echo "******************************************************"
+                echo "*  You seem to have the IBM  C compiler.  It is      *"
+                echo "*  recommended for best performance that you use:    *"
+                echo "*                                                    *"
+                echo "*    CFLAGS=-O3 -qarch=xxx -qtune=xxx -qansialias -w *"
+                echo "*                      ^^^        ^^^                *"
+                echo "*  where xxx is pwr2, pwr3, 604, or whatever kind of *"
+                echo "*  CPU you have.  (Set the CFLAGS environment var.   *"
+                echo "*  and re-run configure.)  For more info, man cc.    *"
+                echo "******************************************************"
+fi
+
+         ;;
+
+    intel) CFLAGS="-O3 -ansi_alias"
+        if test "x$acx_maxopt_portable" = xno; then
+          icc_archflag=unknown
+          icc_flags=""
+          case $host_cpu in
+            i686*|x86_64*)
+              # icc accepts gcc assembly syntax, so these should work:
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+echo "$as_me:$LINENO: checking for x86 cpuid 0 output" >&5
+echo $ECHO_N "checking for x86 cpuid 0 output... $ECHO_C" >&6
+if test "${ax_cv_gcc_x86_cpuid_0+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "$cross_compiling" = yes; then
+  ax_cv_gcc_x86_cpuid_0=unknown
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+
+     int op = 0, eax, ebx, ecx, edx;
+     FILE *f;
+      __asm__("cpuid"
+        : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+        : "a" (op));
+     f = fopen("conftest_cpuid", "w"); if (!f) return 1;
+     fprintf(f, "%x:%x:%x:%x\n", eax, ebx, ecx, edx);
+     fclose(f);
+     return 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ax_cv_gcc_x86_cpuid_0=`cat conftest_cpuid`; rm -f conftest_cpuid
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ax_cv_gcc_x86_cpuid_0=unknown; rm -f conftest_cpuid
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+echo "$as_me:$LINENO: result: $ax_cv_gcc_x86_cpuid_0" >&5
+echo "${ECHO_T}$ax_cv_gcc_x86_cpuid_0" >&6
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+echo "$as_me:$LINENO: checking for x86 cpuid 1 output" >&5
+echo $ECHO_N "checking for x86 cpuid 1 output... $ECHO_C" >&6
+if test "${ax_cv_gcc_x86_cpuid_1+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "$cross_compiling" = yes; then
+  ax_cv_gcc_x86_cpuid_1=unknown
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+
+     int op = 1, eax, ebx, ecx, edx;
+     FILE *f;
+      __asm__("cpuid"
+        : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+        : "a" (op));
+     f = fopen("conftest_cpuid", "w"); if (!f) return 1;
+     fprintf(f, "%x:%x:%x:%x\n", eax, ebx, ecx, edx);
+     fclose(f);
+     return 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ax_cv_gcc_x86_cpuid_1=`cat conftest_cpuid`; rm -f conftest_cpuid
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ax_cv_gcc_x86_cpuid_1=unknown; rm -f conftest_cpuid
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+echo "$as_me:$LINENO: result: $ax_cv_gcc_x86_cpuid_1" >&5
+echo "${ECHO_T}$ax_cv_gcc_x86_cpuid_1" >&6
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+              case $ax_cv_gcc_x86_cpuid_0 in # see AX_GCC_ARCHFLAG
+                *:756e6547:*:*) # Intel
+                  case $ax_cv_gcc_x86_cpuid_1 in
+                    *6a?:*[234]:*:*|*6[789b]?:*:*:*) icc_flags="-xK";;
+                    *f3[347]:*:*:*|*f41347:*:*:*) icc_flags="-xP -xN -xW -xK";;
+                    *f??:*:*:*) icc_flags="-xN -xW -xK";;
+                  esac ;;
+              esac ;;
+          esac
+          if test "x$icc_flags" != x; then
+            for flag in $icc_flags; do
+               echo "$as_me:$LINENO: checking whether C compiler accepts $flag" >&5
+echo $ECHO_N "checking whether C compiler accepts $flag... $ECHO_C" >&6
+ax_save_FLAGS=$CFLAGS
+   CFLAGS="$flag"
+   cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  eval `echo "ax_cv_c_flags_$flag" | $as_tr_sh`=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval `echo "ax_cv_c_flags_$flag" | $as_tr_sh`=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+   CFLAGS=$ax_save_FLAGS
+eval ax_check_compiler_flags=$`echo "ax_cv_c_flags_$flag" | $as_tr_sh`
+echo "$as_me:$LINENO: result: $ax_check_compiler_flags" >&5
+echo "${ECHO_T}$ax_check_compiler_flags" >&6
+if test "x$ax_check_compiler_flags" = xyes; then
+        icc_archflag=$flag; break
+else
+        :
+fi
+
+            done
+          fi
+          echo "$as_me:$LINENO: checking for icc architecture flag" >&5
+echo $ECHO_N "checking for icc architecture flag... $ECHO_C" >&6
+          echo "$as_me:$LINENO: result: $icc_archflag" >&5
+echo "${ECHO_T}$icc_archflag" >&6
+          if test "x$icc_archflag" != xunknown; then
+            CFLAGS="$CFLAGS $icc_archflag"
+          fi
+        fi
+        ;;
+
+    gnu)
+     # default optimization flags for gcc on all systems
+     CFLAGS="-O3 -fomit-frame-pointer"
+
+     # -malign-double for x86 systems
+      echo "$as_me:$LINENO: checking whether C compiler accepts -malign-double" >&5
+echo $ECHO_N "checking whether C compiler accepts -malign-double... $ECHO_C" >&6
+if test "${ax_cv_c_flags__malign_double+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+      ax_save_FLAGS=$CFLAGS
+      CFLAGS="-malign-double"
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ax_cv_c_flags__malign_double=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ax_cv_c_flags__malign_double=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+      CFLAGS=$ax_save_FLAGS
+fi
+
+eval ax_check_compiler_flags=$ax_cv_c_flags__malign_double
+echo "$as_me:$LINENO: result: $ax_check_compiler_flags" >&5
+echo "${ECHO_T}$ax_check_compiler_flags" >&6
+if test "x$ax_check_compiler_flags" = xyes; then
+        CFLAGS="$CFLAGS -malign-double"
+else
+        :
+fi
+
+
+     #  -fstrict-aliasing for gcc-2.95+
+      echo "$as_me:$LINENO: checking whether C compiler accepts -fstrict-aliasing" >&5
+echo $ECHO_N "checking whether C compiler accepts -fstrict-aliasing... $ECHO_C" >&6
+if test "${ax_cv_c_flags__fstrict_aliasing+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+      ax_save_FLAGS=$CFLAGS
+      CFLAGS="-fstrict-aliasing"
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ax_cv_c_flags__fstrict_aliasing=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ax_cv_c_flags__fstrict_aliasing=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+      CFLAGS=$ax_save_FLAGS
+fi
+
+eval ax_check_compiler_flags=$ax_cv_c_flags__fstrict_aliasing
+echo "$as_me:$LINENO: result: $ax_check_compiler_flags" >&5
+echo "${ECHO_T}$ax_check_compiler_flags" >&6
+if test "x$ax_check_compiler_flags" = xyes; then
+        CFLAGS="$CFLAGS -fstrict-aliasing"
+else
+        :
+fi
+
+
+     # note that we enable "unsafe" fp optimization with other compilers, too
+      echo "$as_me:$LINENO: checking whether C compiler accepts -ffast-math" >&5
+echo $ECHO_N "checking whether C compiler accepts -ffast-math... $ECHO_C" >&6
+if test "${ax_cv_c_flags__ffast_math+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+      ax_save_FLAGS=$CFLAGS
+      CFLAGS="-ffast-math"
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ax_cv_c_flags__ffast_math=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ax_cv_c_flags__ffast_math=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+      CFLAGS=$ax_save_FLAGS
+fi
+
+eval ax_check_compiler_flags=$ax_cv_c_flags__ffast_math
+echo "$as_me:$LINENO: result: $ax_check_compiler_flags" >&5
+echo "${ECHO_T}$ax_check_compiler_flags" >&6
+if test "x$ax_check_compiler_flags" = xyes; then
+        CFLAGS="$CFLAGS -ffast-math"
+else
+        :
+fi
+
+
+
+
+
+# Check whether --with-gcc-arch or --without-gcc-arch was given.
+if test "${with_gcc_arch+set}" = set; then
+  withval="$with_gcc_arch"
+  ax_gcc_arch=$withval
+else
+  ax_gcc_arch=yes
+fi;
+
+echo "$as_me:$LINENO: checking for gcc architecture flag" >&5
+echo $ECHO_N "checking for gcc architecture flag... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: " >&5
+echo "${ECHO_T}" >&6
+if test "${ax_cv_gcc_archflag+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ax_cv_gcc_archflag="unknown"
+
+if test "$GCC" = yes; then
+
+if test "x$ax_gcc_arch" = xyes; then
+ax_gcc_arch=""
+if test "$cross_compiling" = no; then
+case $host_cpu in
+  i[3456]86*|x86_64*) # use cpuid codes, in part from x86info-1.7 by D. Jones
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+echo "$as_me:$LINENO: checking for x86 cpuid 0 output" >&5
+echo $ECHO_N "checking for x86 cpuid 0 output... $ECHO_C" >&6
+if test "${ax_cv_gcc_x86_cpuid_0+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "$cross_compiling" = yes; then
+  ax_cv_gcc_x86_cpuid_0=unknown
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+
+     int op = 0, eax, ebx, ecx, edx;
+     FILE *f;
+      __asm__("cpuid"
+        : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+        : "a" (op));
+     f = fopen("conftest_cpuid", "w"); if (!f) return 1;
+     fprintf(f, "%x:%x:%x:%x\n", eax, ebx, ecx, edx);
+     fclose(f);
+     return 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ax_cv_gcc_x86_cpuid_0=`cat conftest_cpuid`; rm -f conftest_cpuid
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ax_cv_gcc_x86_cpuid_0=unknown; rm -f conftest_cpuid
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+echo "$as_me:$LINENO: result: $ax_cv_gcc_x86_cpuid_0" >&5
+echo "${ECHO_T}$ax_cv_gcc_x86_cpuid_0" >&6
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+echo "$as_me:$LINENO: checking for x86 cpuid 1 output" >&5
+echo $ECHO_N "checking for x86 cpuid 1 output... $ECHO_C" >&6
+if test "${ax_cv_gcc_x86_cpuid_1+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "$cross_compiling" = yes; then
+  ax_cv_gcc_x86_cpuid_1=unknown
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+
+     int op = 1, eax, ebx, ecx, edx;
+     FILE *f;
+      __asm__("cpuid"
+        : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+        : "a" (op));
+     f = fopen("conftest_cpuid", "w"); if (!f) return 1;
+     fprintf(f, "%x:%x:%x:%x\n", eax, ebx, ecx, edx);
+     fclose(f);
+     return 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ax_cv_gcc_x86_cpuid_1=`cat conftest_cpuid`; rm -f conftest_cpuid
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ax_cv_gcc_x86_cpuid_1=unknown; rm -f conftest_cpuid
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+echo "$as_me:$LINENO: result: $ax_cv_gcc_x86_cpuid_1" >&5
+echo "${ECHO_T}$ax_cv_gcc_x86_cpuid_1" >&6
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+     case $ax_cv_gcc_x86_cpuid_0 in
+       *:756e6547:*:*) # Intel
+          case $ax_cv_gcc_x86_cpuid_1 in
+            *5[48]?:*:*:*) ax_gcc_arch="pentium-mmx pentium" ;;
+            *5??:*:*:*) ax_gcc_arch=pentium ;;
+            *6[3456]?:*:*:*) ax_gcc_arch="pentium2 pentiumpro" ;;
+            *6a?:*[01]:*:*) ax_gcc_arch="pentium2 pentiumpro" ;;
+            *6a?:*[234]:*:*) ax_gcc_arch="pentium3 pentiumpro" ;;
+            *6[9d]?:*:*:*) ax_gcc_arch="pentium-m pentium3 pentiumpro" ;;
+            *6[78b]?:*:*:*) ax_gcc_arch="pentium3 pentiumpro" ;;
+            *6??:*:*:*) ax_gcc_arch=pentiumpro ;;
+            *f3[347]:*:*:*|*f41347:*:*:*)
+                case $host_cpu in
+                  x86_64*) ax_gcc_arch="nocona pentium4 pentiumpro" ;;
+                  *) ax_gcc_arch="prescott pentium4 pentiumpro" ;;
+                esac ;;
+            *f??:*:*:*) ax_gcc_arch="pentium4 pentiumpro";;
+          esac ;;
+       *:68747541:*:*) # AMD
+          case $ax_cv_gcc_x86_cpuid_1 in
+            *5[67]?:*:*:*) ax_gcc_arch=k6 ;;
+            *5[8d]?:*:*:*) ax_gcc_arch="k6-2 k6" ;;
+            *5[9]?:*:*:*) ax_gcc_arch="k6-3 k6" ;;
+            *60?:*:*:*) ax_gcc_arch=k7 ;;
+            *6[12]?:*:*:*) ax_gcc_arch="athlon k7" ;;
+            *6[34]?:*:*:*) ax_gcc_arch="athlon-tbird k7" ;;
+            *67?:*:*:*) ax_gcc_arch="athlon-4 athlon k7" ;;
+            *6[68a]?:*:*:*)
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+echo "$as_me:$LINENO: checking for x86 cpuid 0x80000006 output" >&5
+echo $ECHO_N "checking for x86 cpuid 0x80000006 output... $ECHO_C" >&6
+if test "${ax_cv_gcc_x86_cpuid_0x80000006+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "$cross_compiling" = yes; then
+  ax_cv_gcc_x86_cpuid_0x80000006=unknown
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+
+     int op = 0x80000006, eax, ebx, ecx, edx;
+     FILE *f;
+      __asm__("cpuid"
+        : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+        : "a" (op));
+     f = fopen("conftest_cpuid", "w"); if (!f) return 1;
+     fprintf(f, "%x:%x:%x:%x\n", eax, ebx, ecx, edx);
+     fclose(f);
+     return 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ax_cv_gcc_x86_cpuid_0x80000006=`cat conftest_cpuid`; rm -f conftest_cpuid
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ax_cv_gcc_x86_cpuid_0x80000006=unknown; rm -f conftest_cpuid
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+echo "$as_me:$LINENO: result: $ax_cv_gcc_x86_cpuid_0x80000006" >&5
+echo "${ECHO_T}$ax_cv_gcc_x86_cpuid_0x80000006" >&6
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ # L2 cache size
+               case $ax_cv_gcc_x86_cpuid_0x80000006 in
+                 *:*:*[1-9a-f]??????:*) # (L2 = ecx >> 16) >= 256
+                        ax_gcc_arch="athlon-xp athlon-4 athlon k7" ;;
+                 *) ax_gcc_arch="athlon-4 athlon k7" ;;
+               esac ;;
+            *f[4cef8b]?:*:*:*) ax_gcc_arch="athlon64 k8" ;;
+            *f5?:*:*:*) ax_gcc_arch="opteron k8" ;;
+            *f7?:*:*:*) ax_gcc_arch="athlon-fx opteron k8" ;;
+            *f??:*:*:*) ax_gcc_arch="k8" ;;
+          esac ;;
+        *:746e6543:*:*) # IDT
+           case $ax_cv_gcc_x86_cpuid_1 in
+             *54?:*:*:*) ax_gcc_arch=winchip-c6 ;;
+             *58?:*:*:*) ax_gcc_arch=winchip2 ;;
+             *6[78]?:*:*:*) ax_gcc_arch=c3 ;;
+             *69?:*:*:*) ax_gcc_arch="c3-2 c3" ;;
+           esac ;;
+     esac
+     if test x"$ax_gcc_arch" = x; then # fallback
+        case $host_cpu in
+          i586*) ax_gcc_arch=pentium ;;
+          i686*) ax_gcc_arch=pentiumpro ;;
+        esac
+     fi
+     ;;
+
+  sparc*)
+     # Extract the first word of "prtdiag", so it can be a program name with args.
+set dummy prtdiag; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_PRTDIAG+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  case $PRTDIAG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_PRTDIAG="$PRTDIAG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_dummy="$PATH:/usr/platform/`uname -i`/sbin/:/usr/platform/`uname -m`/sbin/"
+for as_dir in $as_dummy
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_PRTDIAG="$as_dir/$ac_word$ac_exec_ext"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_path_PRTDIAG" && ac_cv_path_PRTDIAG="prtdiag"
+  ;;
+esac
+fi
+PRTDIAG=$ac_cv_path_PRTDIAG
+
+if test -n "$PRTDIAG"; then
+  echo "$as_me:$LINENO: result: $PRTDIAG" >&5
+echo "${ECHO_T}$PRTDIAG" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+     cputype=`(((grep cpu /proc/cpuinfo | cut -d: -f2) ; ($PRTDIAG -v |grep -i sparc) ; grep -i cpu /var/run/dmesg.boot ) | head -n 1) 2> /dev/null`
+     cputype=`echo "$cputype" | tr -d ' -' |tr $as_cr_LETTERS $as_cr_letters`
+     case $cputype in
+         *ultrasparciv*) ax_gcc_arch="ultrasparc4 ultrasparc3 ultrasparc v9" ;;
+         *ultrasparciii*) ax_gcc_arch="ultrasparc3 ultrasparc v9" ;;
+         *ultrasparc*) ax_gcc_arch="ultrasparc v9" ;;
+         *supersparc*|*tms390z5[05]*) ax_gcc_arch="supersparc v8" ;;
+         *hypersparc*|*rt62[056]*) ax_gcc_arch="hypersparc v8" ;;
+         *cypress*) ax_gcc_arch=cypress ;;
+     esac ;;
+
+  alphaev5) ax_gcc_arch=ev5 ;;
+  alphaev56) ax_gcc_arch=ev56 ;;
+  alphapca56) ax_gcc_arch="pca56 ev56" ;;
+  alphapca57) ax_gcc_arch="pca57 pca56 ev56" ;;
+  alphaev6) ax_gcc_arch=ev6 ;;
+  alphaev67) ax_gcc_arch=ev67 ;;
+  alphaev68) ax_gcc_arch="ev68 ev67" ;;
+  alphaev69) ax_gcc_arch="ev69 ev68 ev67" ;;
+  alphaev7) ax_gcc_arch="ev7 ev69 ev68 ev67" ;;
+  alphaev79) ax_gcc_arch="ev79 ev7 ev69 ev68 ev67" ;;
+
+  powerpc*)
+     cputype=`((grep cpu /proc/cpuinfo | head -n 1 | cut -d: -f2 | cut -d, -f1 | sed 's/ //g') ; /usr/bin/machine ; /bin/machine; grep CPU /var/run/dmesg.boot | head -n 1 | cut -d" " -f2) 2> /dev/null`
+     cputype=`echo $cputype | sed -e 's/ppc//g;s/ *//g'`
+     case $cputype in
+       *750*) ax_gcc_arch="750 G3" ;;
+       *740[0-9]*) ax_gcc_arch="$cputype 7400 G4" ;;
+       *74[4-5][0-9]*) ax_gcc_arch="$cputype 7450 G4" ;;
+       *74[0-9][0-9]*) ax_gcc_arch="$cputype G4" ;;
+       *970*) ax_gcc_arch="970 G5 power4";;
+       *POWER4*|*power4*|*gq*) ax_gcc_arch="power4 970";;
+       *POWER5*|*power5*|*gr*|*gs*) ax_gcc_arch="power5 power4 970";;
+       603ev|8240) ax_gcc_arch="$cputype 603e 603";;
+       *) ax_gcc_arch=$cputype ;;
+     esac
+     ax_gcc_arch="$ax_gcc_arch powerpc"
+     ;;
+esac
+fi # not cross-compiling
+fi # guess arch
+
+if test "x$ax_gcc_arch" != x -a "x$ax_gcc_arch" != xno; then
+for arch in $ax_gcc_arch; do
+  if test "x$acx_maxopt_portable" = xyes; then # if we require portable code
+    flags="-mtune=$arch"
+    # -mcpu=$arch and m$arch generate nonportable code on every arch except
+    # x86.  And some other arches (e.g. Alpha) don't accept -mtune.  Grrr.
+    case $host_cpu in i*86|x86_64*) flags="$flags -mcpu=$arch -m$arch";; esac
+  else
+    flags="-march=$arch -mcpu=$arch -m$arch"
+  fi
+  for flag in $flags; do
+     echo "$as_me:$LINENO: checking whether C compiler accepts $flag" >&5
+echo $ECHO_N "checking whether C compiler accepts $flag... $ECHO_C" >&6
+ax_save_FLAGS=$CFLAGS
+   CFLAGS="$flag"
+   cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  eval `echo "ax_cv_c_flags_$flag" | $as_tr_sh`=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval `echo "ax_cv_c_flags_$flag" | $as_tr_sh`=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+   CFLAGS=$ax_save_FLAGS
+eval ax_check_compiler_flags=$`echo "ax_cv_c_flags_$flag" | $as_tr_sh`
+echo "$as_me:$LINENO: result: $ax_check_compiler_flags" >&5
+echo "${ECHO_T}$ax_check_compiler_flags" >&6
+if test "x$ax_check_compiler_flags" = xyes; then
+        ax_cv_gcc_archflag=$flag; break
+else
+        :
+fi
+
+  done
+  test "x$ax_cv_gcc_archflag" = xunknown || break
+done
+fi
+
+fi # $GCC=yes
+
+fi
+
+echo "$as_me:$LINENO: checking for gcc architecture flag" >&5
+echo $ECHO_N "checking for gcc architecture flag... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $ax_cv_gcc_archflag" >&5
+echo "${ECHO_T}$ax_cv_gcc_archflag" >&6
+if test "x$ax_cv_gcc_archflag" = xunknown; then
+  :
+else
+  CFLAGS="$CFLAGS $ax_cv_gcc_archflag"
+fi
+
+     ;;
+  esac
+
+  if test -z "$CFLAGS"; then
+        echo ""
+        echo "********************************************************"
+        echo "* WARNING: Don't know the best CFLAGS for this system  *"
+        echo "* Use ./configure CFLAGS=... to specify your own flags *"
+        echo "* (otherwise, a default of CFLAGS=-O3 will be used)    *"
+        echo "********************************************************"
+        echo ""
+        CFLAGS="-O3"
+  fi
+
+   echo "$as_me:$LINENO: checking whether C compiler accepts $CFLAGS" >&5
+echo $ECHO_N "checking whether C compiler accepts $CFLAGS... $ECHO_C" >&6
+ax_save_FLAGS=$CFLAGS
+   CFLAGS="$CFLAGS"
+   cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  eval `echo "ax_cv_c_flags_$CFLAGS" | $as_tr_sh`=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval `echo "ax_cv_c_flags_$CFLAGS" | $as_tr_sh`=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+   CFLAGS=$ax_save_FLAGS
+eval ax_check_compiler_flags=$`echo "ax_cv_c_flags_$CFLAGS" | $as_tr_sh`
+echo "$as_me:$LINENO: result: $ax_check_compiler_flags" >&5
+echo "${ECHO_T}$ax_check_compiler_flags" >&6
+if test "x$ax_check_compiler_flags" = xyes; then
+        :
+else
+
+        echo ""
+        echo "********************************************************"
+        echo "* WARNING: The guessed CFLAGS don't seem to work with  *"
+        echo "* your compiler.                                       *"
+        echo "* Use ./configure CFLAGS=... to specify your own flags *"
+        echo "********************************************************"
+        echo ""
+        CFLAGS=""
+
+fi
+
+
+fi
+
+fi
+
+#  Enable debugging
+# Check whether --enable-debug or --disable-debug was given.
+if test "${enable_debug+set}" = set; then
+  enableval="$enable_debug"
+  enable_debug="$enable_debug"
+else
+  enable_debug="yes"
+fi;
+
+if test "${enable_debug}" = "yes"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define DEBUG
+_ACEOF
+
+        echo "$as_me:$LINENO: checking CFLAGS for maximum ansi warnings" >&5
+echo $ECHO_N "checking CFLAGS for maximum ansi warnings... $ECHO_C" >&6
+if test "${ac_cv_cflags_warn_all_ansi+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_cflags_warn_all_ansi="no, unknown"
+
+
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ ac_save_CFLAGS="$CFLAGS"
+# IRIX C compiler:
+#      -use_readonly_const is the default for IRIX C,
+#       puts them into .rodata, but they are copied later.
+#       need to be "-G0 -rdatashared" for strictmode but
+#       I am not sure what effect that has really.         - guidod
+for ac_arg in "-pedantic  % -Wall -std=c99 -pedantic"          "-xstrconst % -v -Xc -xc99=all"                         "-std1      % -verbose -w0 -warnprotos -std1"    " % -qlanglvl=ansi -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd"    " % -ansi -ansiE -fullwarn"                   "+ESlit     % +w1 -Aa"                        "-Xc        % -pvctl,fullmsg -Xc"           "-h conform % -h msglevel 2 -h conform"       #
+do CFLAGS="$ac_save_CFLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
+   cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_cflags_warn_all_ansi=`echo $ac_arg | sed -e 's,.*% *,,'` ; break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+ CFLAGS="$ac_save_CFLAGS"
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_cflags_warn_all_ansi" >&5
+echo "${ECHO_T}$ac_cv_cflags_warn_all_ansi" >&6
+case ".$ac_cv_cflags_warn_all_ansi" in
+     .ok|.ok,*)  ;;
+   .|.no|.no,*)
+ ;;
+   *)
+   if echo " $CFLAGS " | grep " $ac_cv_cflags_warn_all_ansi " 2>&1 >/dev/null
+   then { (echo "$as_me:$LINENO: : CFLAGS does contain \$ac_cv_cflags_warn_all_ansi") >&5
+  (: CFLAGS does contain $ac_cv_cflags_warn_all_ansi) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+   else { (echo "$as_me:$LINENO: : CFLAGS=\"\$CFLAGS \$ac_cv_cflags_warn_all_ansi\"") >&5
+  (: CFLAGS="$CFLAGS $ac_cv_cflags_warn_all_ansi") 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+                      CFLAGS="$CFLAGS $ac_cv_cflags_warn_all_ansi"
+   fi
+ ;;
+esac
+
+fi
+
+
+
+if test "${enable_debug}" = "yes"; then
+  WANT_DEBUG_TRUE=
+  WANT_DEBUG_FALSE='#'
+else
+  WANT_DEBUG_TRUE='#'
+  WANT_DEBUG_FALSE=
+fi
+
+
+
+case "$host" in
+                *-solaris2*)
+                        if test "x${ax_cv_c_compiler_vendor}"  =  "xsun" ; then                                SOLINK="-Bdynamic -dy -G"
+                                new_AM_CFLAGS="-DPATH_MAX=2048 -KPIC -DPIC"
+                                new_AM_LDFLAGS="-L${prefix}/lib -R${prefix}/lib"
+                                FUNC_DEF=__func__
+                                IN_LINE=""
+                        elif test "x${ax_cv_c_compiler_vendor}" = "xgnu" ; then                                SOLINK="-Bdynamic -dy -G"
+                                new_AM_CFLAGS="-DPATH_MAX=2048 -fPIC"
+                                new_AM_LDFLAGS=""
+                                FUNC_DEF=__FUNCTION__
+                                IN_LINE=inline
+                        fi
+                        DYNAMIC_LIB_EXTEN="so"
+                ;;
+                *-darwin*)
+                        if test "x${ax_cv_c_compiler_vendor}"="xgnu" ; then
+                                SOLINK="-dynamic -bundle -force-flat-namespace"
+                                new_AM_CFLAGS="-DMACOSX"
+                                new_AM_LDFLAGS=""
+                        fi
+                        DYNAMIC_LIB_EXTEN="dylib"
+                        IN_LINE=inline
+                        FUNC_DEF=__FUNCTION__
+                ;;
+                x86_64-*-linux-gnu)
+                        if test "x${ax_cv_c_compiler_vendor}" = "xsun" ; then
+                                SOLINK="-Bdynamic -dy -G"
+                                new_AM_CFLAGS="-KPIC -DPIC"
+                                new_AM_LDFLAGS="-L${prefix}/lib -R${prefix}/lib"
+                                FUNC_DEF=__func__
+                        elif test "x${ax_cv_c_compiler_vendor}"="xgnu" ; then
+                                SOLINK="-shared -Xlinker -x"
+                                new_AM_CFLAGS="-fPIC"
+                                new_AM_LDFLAGS=""
+                                FUNC_DEF=__FUNCTION__
+                        fi
+                        DYNAMIC_LIB_EXTEN="so"
+                        IN_LINE=inline
+                ;;
+                i*6-*-linux-gnu)
+                        if test "x${ax_cv_c_compiler_vendor}" = "xsun" ; then
+                                SOLINK="-Bdynamic -dy -G"
+                                new_AM_CFLAGS="-KPIC -DPIC"
+                                new_AM_LDFLAGS="-L${prefix}/lib -R${prefix}/lib"
+                                FUNC_DEF=__func__
+                        elif test "x${ax_cv_c_compiler_vendor}"="xgnu" ; then
+                                SOLINK="-shared -Xlinker -x"
+                                new_AM_CFLAGS="-fpic"
+                                new_AM_LDFLAGS=""
+                                FUNC_DEF=__FUNCTION__
+                        fi
+                        IN_LINE=inline
+                        DYNAMIC_LIB_EXTEN="so"
+                ;;
+esac
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define __FUNCTION__ $FUNC_DEF
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define inline $IN_LINE
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define __inline__ $IN_LINE
+_ACEOF
+
+
 
 # Checks for header files.
 
@@ -21243,10 +22025,6 @@ else
   IS64BITLINUX_FALSE=
 fi
 
-# AM_CONDITIONAL(ISSUNOS, [test `uname -s` = SunOS])
-# AM_CONDITIONAL(ISSUN64, [test `isainfo -b` = 64])
-# AM_CONDITIONAL(ISSUNSPARC, [test `isainfo -n` = sparcv9])
-# AM_CONDITIONAL(ISGCC, [test `echo $GCC` = true])
 
           ac_config_files="$ac_config_files src/include/switch_version.h"
 cat >confcache <<\_ACEOF
@@ -21361,6 +22139,13 @@ echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
+if test -z "${WANT_DEBUG_TRUE}" && test -z "${WANT_DEBUG_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"WANT_DEBUG\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"WANT_DEBUG\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
 if test -z "${CRASHPROT_TRUE}" && test -z "${CRASHPROT_FALSE}"; then
   { { echo "$as_me:$LINENO: error: conditional \"CRASHPROT\" was never defined.
 Usually this means the macro was only invoked conditionally." >&5
@@ -21987,6 +22772,13 @@ s,@F77@,$F77,;t t
 s,@FFLAGS@,$FFLAGS,;t t
 s,@ac_ct_F77@,$ac_ct_F77,;t t
 s,@LIBTOOL@,$LIBTOOL,;t t
+s,@PRTDIAG@,$PRTDIAG,;t t
+s,@WANT_DEBUG_TRUE@,$WANT_DEBUG_TRUE,;t t
+s,@WANT_DEBUG_FALSE@,$WANT_DEBUG_FALSE,;t t
+s,@new_AM_CFLAGS@,$new_AM_CFLAGS,;t t
+s,@new_AM_LDFLAGS@,$new_AM_LDFLAGS,;t t
+s,@SOLINK@,$SOLINK,;t t
+s,@DYNAMIC_LIB_EXTEN@,$DYNAMIC_LIB_EXTEN,;t t
 s,@LIBOBJS@,$LIBOBJS,;t t
 s,@CRASHPROT_TRUE@,$CRASHPROT_TRUE,;t t
 s,@CRASHPROT_FALSE@,$CRASHPROT_FALSE,;t t
diff --git a/configure.in b/configure.in
index cc79af2941..7101d34e00 100644
--- a/configure.in
+++ b/configure.in
@@ -10,6 +10,8 @@ AC_CONFIG_HEADER([src/include/switch_am_config.h])
 
 AC_PREFIX_DEFAULT(/usr/local/freeswitch)
 
+#Set default language
+AC_LANG_C
 # Checks for programs.
 AC_PROG_CC
 AC_PROG_AWK
@@ -17,6 +19,95 @@ AC_PROG_MAKE_SET
 AC_PROG_INSTALL
 AC_PROG_LIBTOOL
 
+#Check for compiler vendor
+AX_COMPILER_VENDOR
+
+#  Optimize
+AC_ARG_ENABLE(optimization,
+[AC_HELP_STRING([--enable-optimization],[Set if you want us to add max optimising compiler flags])],[enable_optimizer="$enableval"],[enable_optimizer="no"])
+
+if test "${enable_optimizer}" = "yes" ; then
+        AC_DEFINE([OPTIMZER],[],[Enable Optimization.])
+        AX_CC_MAXOPT
+fi
+
+#  Enable debugging
+AC_ARG_ENABLE(debug,
+[AC_HELP_STRING([--enable-debug],[build with debug information])],[enable_debug="$enable_debug"],[enable_debug="yes"])
+
+if test "${enable_debug}" = "yes"; then
+        AC_DEFINE([DEBUG],[],[Enable extra debugging.])
+        AX_CFLAGS_WARN_ALL_ANSI
+fi
+
+AM_CONDITIONAL([WANT_DEBUG],[test "${enable_debug}" = "yes"])
+
+
+case "$host" in
+                *-solaris2*)
+                        if test "x${ax_cv_c_compiler_vendor}"  =  "xsun" ; then                                SOLINK="-Bdynamic -dy -G"
+                                new_AM_CFLAGS="-DPATH_MAX=2048 -KPIC -DPIC"
+                                new_AM_LDFLAGS="-L${prefix}/lib -R${prefix}/lib"
+                                FUNC_DEF=__func__
+                                IN_LINE=""
+                        elif test "x${ax_cv_c_compiler_vendor}" = "xgnu" ; then                                SOLINK="-Bdynamic -dy -G"
+                                new_AM_CFLAGS="-DPATH_MAX=2048 -fPIC"
+                                new_AM_LDFLAGS=""
+                                FUNC_DEF=__FUNCTION__
+                                IN_LINE=inline
+                        fi
+                        DYNAMIC_LIB_EXTEN="so"
+                ;;
+                *-darwin*)
+                        if test "x${ax_cv_c_compiler_vendor}"="xgnu" ; then
+                                SOLINK="-dynamic -bundle -force-flat-namespace"
+                                new_AM_CFLAGS="-DMACOSX"
+                                new_AM_LDFLAGS=""
+                        fi
+                        DYNAMIC_LIB_EXTEN="dylib"
+                        IN_LINE=inline
+                        FUNC_DEF=__FUNCTION__
+                ;;
+                x86_64-*-linux-gnu)
+                        if test "x${ax_cv_c_compiler_vendor}" = "xsun" ; then
+                                SOLINK="-Bdynamic -dy -G"
+                                new_AM_CFLAGS="-KPIC -DPIC"
+                                new_AM_LDFLAGS="-L${prefix}/lib -R${prefix}/lib"
+                                FUNC_DEF=__func__
+                        elif test "x${ax_cv_c_compiler_vendor}"="xgnu" ; then
+                                SOLINK="-shared -Xlinker -x"
+                                new_AM_CFLAGS="-fPIC"
+                                new_AM_LDFLAGS=""
+                                FUNC_DEF=__FUNCTION__
+                        fi
+                        DYNAMIC_LIB_EXTEN="so"
+                        IN_LINE=inline
+                ;;
+                i*6-*-linux-gnu)
+                        if test "x${ax_cv_c_compiler_vendor}" = "xsun" ; then
+                                SOLINK="-Bdynamic -dy -G"
+                                new_AM_CFLAGS="-KPIC -DPIC"
+                                new_AM_LDFLAGS="-L${prefix}/lib -R${prefix}/lib"
+                                FUNC_DEF=__func__
+                        elif test "x${ax_cv_c_compiler_vendor}"="xgnu" ; then
+                                SOLINK="-shared -Xlinker -x"
+                                new_AM_CFLAGS="-fpic"
+                                new_AM_LDFLAGS=""
+                                FUNC_DEF=__FUNCTION__
+                        fi
+                        IN_LINE=inline
+                        DYNAMIC_LIB_EXTEN="so"
+                ;;
+esac
+AC_SUBST(new_AM_CFLAGS)
+AC_SUBST(new_AM_LDFLAGS)
+AC_SUBST(SOLINK)
+AC_SUBST(DYNAMIC_LIB_EXTEN)
+AC_DEFINE_UNQUOTED([__FUNCTION__],[$FUNC_DEF],[define it the right way ;)])
+AC_DEFINE_UNQUOTED([inline],[$IN_LINE],[sunpro is bad at inline])
+AC_DEFINE_UNQUOTED([__inline__],[$IN_LINE],[sunpro is bad at inline])
+
+
 # Checks for header files.
 AC_HEADER_DIRENT
 AC_HEADER_STDC
@@ -50,9 +141,5 @@ AC_CONFIG_FILES([Makefile])
 AM_CONDITIONAL(ISLINUX, [test `uname -s` = Linux])
 AM_CONDITIONAL(ISMAC, [test `uname -s` = Darwin])
 AM_CONDITIONAL(IS64BITLINUX, [test `uname -m` = x86_64])
-# AM_CONDITIONAL(ISSUNOS, [test `uname -s` = SunOS])
-# AM_CONDITIONAL(ISSUN64, [test `isainfo -b` = 64])
-# AM_CONDITIONAL(ISSUNSPARC, [test `isainfo -n` = sparcv9])
-# AM_CONDITIONAL(ISGCC, [test `echo $GCC` = true])
 
 AC_OUTPUT([src/include/switch_version.h])
diff --git a/generic_mod.mk b/generic_mod.mk
index 4264e434e5..5e14eb630b 100644
--- a/generic_mod.mk
+++ b/generic_mod.mk
@@ -1,7 +1,7 @@
 all:	$(MODNAME).$(DYNAMIC_LIB_EXTEN)
 
 $(MODNAME).$(DYNAMIC_LIB_EXTEN): $(MODNAME).c
-	$(CC) $(CFLAGS) -fPIC -c $(MODNAME).c -o $(MODNAME).o
+	$(CC) $(CFLAGS) -c $(MODNAME).c -o $(MODNAME).o
 	$(CC) $(SOLINK) $(MODNAME).o -o $(MODNAME).$(DYNAMIC_LIB_EXTEN) $(LDFLAGS)
 
 clean:
diff --git a/src/include/switch_am_config.h.in b/src/include/switch_am_config.h.in
index c2a949cebe..c88b6e6298 100644
--- a/src/include/switch_am_config.h.in
+++ b/src/include/switch_am_config.h.in
@@ -1,5 +1,8 @@
 /* src/include/switch_am_config.h.in.  Generated from configure.in by autoheader.  */
 
+/* Enable extra debugging. */
+#undef DEBUG
+
 /* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
    */
 #undef HAVE_DIRENT_H
@@ -70,6 +73,9 @@
 /* Define to 1 if you have the `vasprintf' function. */
 #undef HAVE_VASPRINTF
 
+/* Enable Optimization. */
+#undef OPTIMZER
+
 /* Name of package */
 #undef PACKAGE
 
@@ -109,9 +115,15 @@
 /* Little Endian */
 #undef __BYTE_ORDER
 
+/* define it the right way ;) */
+#undef __FUNCTION__
+
 /* for the places where it is not defined */
 #undef __LITTLE_ENDIAN
 
+/* sunpro is bad at inline */
+#undef __inline__
+
 /* Define to empty if `const' does not conform to ANSI C. */
 #undef const
 
diff --git a/src/mod/codecs/mod_g711/Makefile b/src/mod/codecs/mod_g711/Makefile
index 347d43204a..823b01feb7 100644
--- a/src/mod/codecs/mod_g711/Makefile
+++ b/src/mod/codecs/mod_g711/Makefile
@@ -2,7 +2,7 @@ CFLAGS += -I$(BASE)/libs/codec/g7xx/src/include
 all:	$(MODNAME).$(DYNAMIC_LIB_EXTEN)
 
 $(MODNAME).$(DYNAMIC_LIB_EXTEN): $(MODNAME).c
-	$(CC) $(CFLAGS) -fPIC -c $(MODNAME).c -o $(MODNAME).o
+	$(CC) $(CFLAGS) -c $(MODNAME).c -o $(MODNAME).o
 	$(CC) $(SOLINK) $(MODNAME).o -o $(MODNAME).$(DYNAMIC_LIB_EXTEN) $(LDFLAGS)